2009 개정 교육과정에 따른 초등수학 교사용 지도서 검토 연구

김성준,Kim, Sung Joon 영남수학회 2016 East Asian mathematical journal Vol.32 No.2

The purpose of this study is to provide an opportunity for better understanding and application of 2009 revised elementary school mathematics textbooks through focus group's investigations on the elementary mathematics teacher's guide books. First, We survey previous studies on the teacher's guide books to make the frame of investigation. Next, We compose focus group(8 teachers) for 3~4th grades, and analyze the teacher's guide books according to ready-made frame: compliance of curriculum, accuracy and fairness of contents, selection and organization of contents. As results of investigation, system of organization of the teacher's guide books is needed. Goal, contents, teaching methods, and evaluations have to be consistent in describing mathematical terms. And errors in mathematics and mathematics education are examined more carefully. The teacher's guide books afford teachers many materials and informations to teach mathematics through classroom lessons. So more study on the teacher's guide books and developmental study for the model guidebooks is needed along with the revised curriculum and new textbooks.

세라믹 비니어의 글레이징에 따른 반투명도 변화

김성준,감세훈,Kim, Sung-Joon,Kahm, Se Hoon 대한치과보철학회 2015 대한치과보철학회지 Vol.53 No.2

목적: 본 연구의 목적은 두 종의 라미네이트 세라믹 비니어의 글레이징 여부에 따른 반투명도 변화를 비교하는데 있다. 재료 및 방법: IPS e.maxPress (IEM)와 Styleveneers (STV)를 대상으로 하여 각각 0.3 mm와 0.6 mm 두께의 한 변이 10 mm인 정사각형 형태의 시편을 글레이징을 시행한 군과 하지 않은 군으로 나누어 제작하였다(n=80). 각 시편은 측색기를 이용하여 색좌표(CIE $L^*a^*b^*$)를 측정하였다. Translucency Parameter (TP)는 측정한 색차를 계산하여 얻었다. 각 제조사별 차이와, 글레이징 여부에 관한 통계 분석을 위해 독립표본 t-test를 시행하였다(P=.05). 결과: IEM의 0.3 mm 두께에서 TP값(평균${\pm}$표준편차)은 글레이징을 시행하지 않은 군에서 $45.99{\pm}3.00$, 글레이징을 시행한 군에서 $49.53{\pm}2.28$이었으며, 0.6 mm 두께에서는 각각 $32.82{\pm}2.59$과 $43.02{\pm}0.98$이었다. 마찬가지로, STV의 0.3 mm 두께에서 TP값은 글레이징을 시행하지 않은 군에서 $47.03{\pm}3.65$, 글레이징을 시행한 군에서 $50.95{\pm}3.05$이었으며, 0.6 mm 두께에서는 각각 $34.48{\pm}1.28$과 $43.39{\pm}1.20$이었다. 세라믹 비니어의 글레이징 여부에 따라, 세라믹 비니어의 TP값은 통계적으로 차이가 나타났다. 그러나 제조사간의 통계적 유의성은 없었다. 결론: 한계는 있지만, 본 연구에서, 라미네이트 세라믹 비니어는 글레이징 과정을 거치면 반투명도가 변화되며, 제조사간의 차이는 없다는 결론을 얻었다. Purpose: The aim of this study was to compare the translucency of two different laminate ceramic veneers with and without glazing. Materials and methods: Ten millimeter side square-shaped specimens in 0.3 mm and 0.6 mm thick were fabricated for the following materials with and without glazing (n=80): A1 shade IPS e.maxPress (IEM) and Styleveneers (STV). The color coordinates (CIE $L^*a^*b^*$) of the specimens were measured with a colorimeter. The Translucency parameter (TP) was calculated from the color difference of the material on a black versus a white background. For comparisons between materials and between the 'not glazed' and 'glazed' groups, unpaired t-test was used to analyze the data (P=.05). Results: The TP ($Mean{\pm}SD$) of 'not-glazed' and 'glazed' group of IEM specimens at 0.3 mm thickness were $45.99{\pm}3.00$ and $49.53{\pm}2.28$ and the TP at 0.6 mm thickness were $32.82{\pm}2.59$ and $43.02{\pm}0.98$, respectively. Likewise, the TP of 'not-glazed' and 'glazed' group of STV specimens at 0.3 mm thickness were $47.03{\pm}3.65$ and $50.95{\pm}3.05$ and the TP at 0.6 mm thickness group were $34.48{\pm}1.28$ and $43.39{\pm}1.20$, respectively. As the glazing of ceramic veneer differed, the TP of each ceramic veneer showed statistically significant difference. But, the result between the products was not statistically different. Conclusion: Within the limitations of this study, we are concluded that the glazing process changed translucency of laminate ceramic veneers and the TP would not be affected by products.

고고도 장기체공 무인기 구조 설계 및 해석

김성준,이승규,김성찬,김태욱,김승호,Kim, Sung Joon,Lee, Seunggyu,Kim, Sung Chan,Kim, Tae-Uk,Kim, Seungho 한국항공운항학회 2014 한국항공운항학회지 Vol.22 No.3

Research is being carried out at Korea Aerospace Research Institute with aim of design a HALE UAV(High Altitude Long Endurance Unmanned Air Vehicle). HALE UAVs are ideally suited to provide surveillance, remote sensing and communication relay capabilities for both military and civilian applications. HALE UAVs typically cruise at an altitude between 15 km and 20 km, travelling at low speed and circling specific area of interest. Airframe structural point of view, weight reduction of the airframe structure is the most important method to improve the flight efficiency. High modulus CFRP(Carbon Fiber Reinforced Polymer) has been used in designing the structure in order to minimize the airframe weight. With respect to structural design and analysis, the key question is to decide an adequate airworthiness certification base to define suitable load cases for sizing of various structural components. In this study, FAR(Federal Aviation Regulation) 23 have constituted the guidance and benchmark throughout all structural studies. And the MSC/FlightLoads was introduced to analyze the flight loads for the HALE UAV. The MSC/FlightLoads can compute the flexible air load and analyzed loads are distributed on structural model directly. A preliminary structural concept was defined in accordance with the estimated inertial and aerodynamic loads. A FEM analysis was carried out using the MSC/Nastran code to predict the static and dynamic behaviour of UAV structure.

노발리스를 이용한 방사선 수술시 치료테이블을 투과하는 광자선의 감쇠율에 따른 선량 보정방법

김성준,신현수,고승영,박혜리,김자영,이보미,예지원,김성규,Kim, Sung-Joon,Shin, Hyun-Soo,Ko, Seung-Young,Park, Hye-Li,Kim, Ja-Young,Lee, Bo-Mi,Yea, Ji-Woon,Kim, Sung-Kyu 한국의학물리학회 2011 의학물리 Vol.22 No.1

본 연구는 노발리스용 치료테이블(couch top)을 투과하는 광자선의 감쇠율(attenuation rate)을 기하학적 모델을 통해 계산하고 보정함으로써, 치료부위에 정확한 선량이 전달되게 하는데 그 목적이 있다. 실험은 치료테이블을 투과하는 광자선의 투과율과 감쇠율을 기하학적인 모델에 의해 예측하고 이를 바탕으로 실험적으로 측정된 것을 비교 및 분석하였다. 그 결과 기하학적 모델에 의해 예측된 값과 실험값이 매우 잘 일치하는 것으로 나타났다. 또 실제 임상적용의 가능여부를 판단하기 위하여, 척추 방사선수술(spine radiosurgery)환자의 치료계획에 모델링화한 감쇠율을 보정한 뒤 측정한 중심점 선량과 그렇지 않은 것을 비교하였더니, 전자가 치료계획된 것과의 오차율이 감소함을 보였다. 본 논문에서는 치료테이블을 투과하는 광자선의 기하학적 모델을 통해 투과율과 감쇠율을 계산하고 이를 실험적으로 증명하였다. 이 방법은 노발리스를 이용한 방사선 수술뿐만 아니라 일반적인 방사선 치료에 있어서도 매우 유용할 것으로 판단된다. This study has its own goal to deliver the accurate dose on the target volume by calculating and modifying the attenuation rate of photon beam transmitting the couch top with geometric model. The experiment was that the transmission rate and attenuation rate of photon beam transmitting the couch top was predicted by the geometric model, then compared and analyzed with what was measured experimentally based on that. The result showed that the predicted value by the geometric model accorded closely with the experimental value. In addition, in order to judge whether the practical clinical application is available, the point dose, measured after modifying the attenuation rate modelinged according to the treatment plan of a patient of spine radiosurgery, was compared with the one done nothing. The result was that the former showed decreased error range with treatment planned one than the latter. This papers calculated the transmission and attenuation rate with the geometric model transmitting the couch top and verified it experimentally. This method is expected to be very useful in not only the radiosurgery using Novalis but also the general radiation therapy.

파아지 T7 전사종결제에 의한 파아지 SP6와 T7 RNA 중합효소의 전사종결반응

김성준,강창원,Kim, Sung-Joon,Kang, Chang-Won 생화학분자생물학회 1988 한국생화학회지 Vol.21 No.4

파아지 T7 genome에서 비교적 강력한 T7RNA 중합효소의 전사종결제로 알려진$T{\phi}$의 전사종결효율에 대해서 연구하였다. 또한 T7 RNA 중합효소와 분자생물학적 특성이 유사한 파아지 SP6 RNA 중합효소에 대한 종결능력 여부를 조사하였다. 우선, 종결제 $T{\phi}$가 클론된 플라스미드 pET-3로부터 SP6와 T7 RNA 중합효소의 전사촉진제가 서로 마주보고 있는 플라스미드 pGEM3Z로 $T{\phi}$를 옮겼다. 전사종결효율을 정량적으로 측정하기 위하여 [${\alpha}-^{32}P$]rNTP를 사용하여 생체 외 전사반응을 통해 전사체에 방사능을 부여하였다. 그리고 종결제 아랫부분을 제한효소로 절단하여 전사시킴으로써 얻어지는 run-off 전사체의 양과 종결제에 의해 종결된 전사체의 양을 비교하였다. T7 RNA 중합효소의 전사는 pET-3에 있는 $T{\phi}$에 의해서 78%가 종결되는 반면, pGEM3Z에 삽입된 $T{\phi}$에 의해서는 38% 밖에 종결되지 않았다. 이는 종결제 이외의 DNA 염기열이 전사종결에 영향을 마치는 것을 시사한다. 또한, SP6 RNA 중합효소의 전사도 pGEM3Z에 삽입된 $T{\phi}$에 의해서 81%가 종결되었다. 이는 두 파아지 중합효소의 전사종결기작이 유사함을 시사한다. Transcription termination efficiencies of a phage T7 terminator $T{\phi}$ for the T7 and SP6 RNA polymerases were studied. The terminator $T{\phi}$ cloned in the plasmid pET-3 was subcloned into the plasmid pGEM3Z which contains both SP6 and T7 RNA polymerase promoters facing each other. Amounts of transcripts terminated at $T{\phi}$ were compared with amounts of read-through transcripts run off at a restriction site. For quantitative analysis the transcripts were labeled with [${\alpha}-^{32}P$]rNTP in in vitro transcription reaction. Transcription of T7 RNA polymerase terminates with efficiency of 78% by the $T{\phi}$ in the pET-3, but terminates with efficiency of 38% by the $T{\phi}$ in the pGEM3Z. It suggests that DNA sequences other than the terminator sequence affect the termination efficiency. Interestingly, the $T{\phi}$ shows 81% termination efficiency for the SP6 RNA polymerase. Now this becomes the first strong terminator discovered for the SP6 RNA polymerase. This also suggests that both phage RNA polymerases might share similar mechanism of transcription termination.

초등수학영재를 위한 교수학습 자료 개발 및 적용

김성준,Kim, Sung Joon 영남수학회 2021 East Asian mathematical journal Vol.37 No.4

This study analyzes the characteristics of elementary math gifted classes through the development and application of teaching and learning materials. We used the guided reinvention methods including quasi-experiential perspectives. To this end, the applicability of Lakatos' quasi-empirical mathematical philosophy in elementary mathematics was examined, and the criteria for the development of teaching and learning materials for gifted students were presented, and then this study was conducted in this theoretical background. The subjects of the study were 21 elementary students at P University's Institute of Science and Gifted Education, and non-face-to-face real-time classes were conducted. Classes were divided into introduction, deployment1, deployment2, organization stages, and in each stage, small group cooperative learning was conducted based on group activities, and in this process, the characteristics of elementary mathematics gifted were analyzed. As a result of the study, elementary mathematics gifted students did not clearly present the essence of justification in the addition algorithm of fractions, but presented various interpretations of 'wrong' mathematics. They also showed their ingenuity in the process of spontaneously developing 'wrong' mathematics. On the other hand, by taking interest in new mathematics starting from 'wrong' mathematics, negative perceptions about it could be improved positively. It is expected that the development of teaching and learning materials dealing with various and original topics for the gifted students in elementary school will proceed through follow-up research.

다중시기 Landsat TM 영상을 이용한 화옹지구의 간척사업에 따른 갯벌면적의 변화 추정

김성준,방노성,권형중,Kim Seong-Joon,Bang Ro-Sung,Kwon Hyung-Joong 한국관개배수위원회 2003 한국관개배수논문집 Vol.10 No.1

The purpose of this study is to suggest a simple estimation method of tidal flat areas using multi-temporal Landsat TM images due to the progress of sea dike construction for tidal land reclamation. As a case study, Hwa-ong project in which dike construct

Characteristics of Photon Beam through a Handmade Build-Up Modifier as a Substitute of a Bolus

김성준,이승준,문수호,설기호,이정은,Kim, Sung Joon,Lee, Seoung Jun,Moon, Su Ho,Seol, Ki Ho,Lee, Jeong Eun Korean Society of Medical Physics 2014 의학물리 Vol.25 No.4

본 논문에서는 자체 제작된 선량상승영역 변환기(build-up modifier, BM)을 투과하는 high energy photon beam의 심부선량백분율(PDD)을 특성을 측정하고 이 결과를 토대로 BM 산란인자(BM scatter factor, $S_{BM}$)를 계산하였다. 다양한 조건에서 BM scatter가 PDD의 Build-up region에 미치는 영향을 평가하고 BM의 유용성을 알아보는 것이 본 연구의 목적이다. $S_{BM}$는 BM을 사용하지 않은 SFS 30 mm에서 측정된 산란인자의 값을 1로서 정규화 하였다. 가장 큰 SFS 200 mm의 경우, 6 MV 광자선을 사용할 때 $S_{BM}$는 두께에 따라 각각 1.331, 1.519, 1.598, 1.641, 그리고 1.657이었다. 10 MV 광자선에는 각각 1.384, 1.662, 1.825, 1.913, 그리고 2.001이었다. BM의 효과는 bolus의 최대 76% 효율을 가지는 것으로 나타났다. Bolus를 밀착시키기 어려운 특정적 부위에 대해 BM은 그 대안으로써 효과적인 장치가 될 수 있을 것으로 기대된다. We evaluated the effect of scatter on a build-up region based on the measured percent depth dose (PDD) of high-energy photon beams that penetrated a handmade build-up modifier (BM) as a substitute of bolus. BM scatter factors ($S_{BM}$) were calculated based on the PDDs of photon beams that penetrated through the BM. The calculated $S_{BM}$ values were normalized to 1 at the square field side (SFS) of 30 mm without a BM. For the largest SFS (200 mm), the SBM values for a 6-MV beam were 1.331, 1.519, 1.598, 1.641, and 1.657 for the corresponding BM thickness values. For a 10-MV beam, the $S_{BM}$ values were 1.384, 1.662, 1.825, 1.913, and 2.001 for the corresponding BM thickness values. The BM yielded 76% of the bolus efficiency. We expect BM to become useful devices for deep-set patient body parts to which it is difficult to apply a bolus.

라이프니츠의 분석법에 관한 고찰

김성준,Kim, Sung-Joon 한국수학사학회 2006 Journal for history of mathematics Vol.19 No.4

This paper aims to review Leibniz's analytic ideas in his philosophy, logics, and mathematics. History of analysis in mathematics ascend its origin to Greek period. Analysis was used to prove geometrical theorems since Pythagoras. Pappus took foundation in analysis more systematically. Descartes tried to find the value of analysis as a heuristics and found analytic geometry. And Descartes and Leibniz thought that analysis was played most important role in investigating studies and inventing new truths including mathematics. Among these discussions about analysis, this paper investigate Leibniz's analysis focusing to his ideas over the whole of his studies. 수학에서 분석(analysis)의 역사는 고대 그리스에서부터 시작되었다. 그리스의 기하적 분석법은 16세기 비에트$(Vi{\`{e}}te)$와 데카르트(Descartes) 이후 방정식을 이용한 문제해결(대수적 분석법)로 확장되었으며, 그 결과 대수는 분석을 위한 기술(art for analysis)로 대변되었다. 그리고 뉴헌(Newton)과 라이프니츠(Leibniz)에 의해 미적 분학이 탄생되면서 분석은 대수에서 한 걸음 더 나아가 오늘날 수학의 한 분야인 해석학으로 발전되었다. 그 동안 수학교육학 연구에서는 분석과 관련된 논의가 파푸스(Pappus)와 데카르트를 중심으로 다루어져 왔으나, 지금까지 라이프니츠의 역할과 그에 대한 연구는 거의 다루어지지 않았다. 본 연구는 라이프니츠의 철학 및 논리학을 바탕으로 그 가운데 분석과 관련된 그의 아이디어를 살펴보고, 이를 통해 그가 생각한 수학에서의 분석의 역할에 대해 논의하였다.

유무인 겸용 개인항공기(OPPAV) 개념설계를 위한 구조물 사이징

김성준,이승규,Kim, Sung Joon,Lee, Seung-gyu 한국항공운항학회 2020 한국항공운항학회지 Vol.28 No.1

Personal air vehicle (PAV) is considered by aviation engineers as a solution to provide fast urban mobility. The purpose of designing a optionally piloted PAV (OPPAV) is to provide an individual air vehicle. The airframe structure is designed with high strength carbon fiber composite to reduce the aircraft weight. This paper presents an overview of sizing process for OPPAV at the conceptual design level. It consists of load analysis, structural sizing and development of efficient design allowable values for composite material. The weight is estimated based on sizing process, including strength and stiffness requirements. The objective of this study is to present a overview of structural sizing procedure and fast tool for preliminary design phases.