http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김대영,김백윤,윤재룡,Kim, Dae-Young,Kim, Baik-Yoon,Yoon, Jae-Rhyong 한국현미경학회 1998 Applied microscopy Vol.28 No.2
The development of the superior cervical ganglion was studied by electron microscopic method in human fetuses ranging from 40 mm to 260 mm of crown-rump length (10 to 30 weeks of gestational age). At 40 mm fetus, the superior cervical ganglion was composed of clusters of undifferentiated cell, primitive neuroblast, primitive supporting cell, and unmyelinated fibers. At 70mm fetus, the neuroblasts and their processes were ensheated by the bodies or processes of satellite cells. The cytoplasm of the neuroblast contained rough endoplasmic reticulum, mitochondria, Golgi complex, Nissl bodies and dense-cored vesicles. As the neuroblasts grew and differentiated dense-cored vesicles moved away from perikaryal cytoplasm into developing processes. Synaptic contacts between the cholinergic axon and dendrites of postganglionic neuron and a few axosomatic synapses were first observed at 70 mm fetus. At 90 mm fetus the superior cervical ganglion consisted of neuroblasts, satellite cells, granule-containing cells, and unmyelinated nerve fibers. The ganglion cells increased somewhat in numbers and size by 150 mm fetus. Further differentiation resulted in the formation of young ganglion cells, whose cytoplasm was densely filled with cell organelles. During next prenatal stage up to 260 mm fetus, the cytoplasm of the ganglion cells contained except for large pigment granules, all intracytoplasmic structures which were also found in mature superior cervical ganglion. A great number of synaptic contact zones between the cholinergic preganglionic axon and the dendrites of the postganglionic neuron were observed and a few axosomatic synapses were also observed. Two morphological types of the granule-containing cells in the superior cervical ganglion were first identified at 90 mm fetus. Type I granule-containing cell occurred in solitary, whereas type II tended to appeared in clusters near the blood capillaries. Synaptic contacts were first found on the solitary granule-containing cell at 150 mm fetus. Synaptic contacts between the soma of type I granule-containing cells and preganglionic axon termials were observed. In addition, synaptic junctions between the processes of the granule- containing cells and dendrites of postganglionic neuron were also observed from 150 mm fetus onward. In conclusion, superior cervical ganglion cells and granule-containing cells arise from a common undifferentiated cell precursor of neural crest . The granule-containg cells exhibit a local modulatory feedback system in the superior cervical ganglion and nay serve as interneurons between the preganglionic and postganglionic cells.
김대영,원영호,김성진,이승철,전인기 ( Dae Young Kim,Young Ho Won,Seong Jin Kim,Seung Chul Lee,Inn Ki Chun ) 대한피부과학회 1997 대한피부과학회지 Vol.35 No.4
Pyoderma gangrenosum is a rare neutrophilic dermatosis manifesting as painful pustules or bullae, which rapidly become necrotic to produce an ulceration. It is often associated with systemic disease, such as inflammatory bowel disease, rheumatoid arthritis, leukemia, but myelofibrosis is reported rarely for its underlying disease. The most common location is the lower extremities, and the pyoderma gangrenosum also occur infrequently on the hand and face. As in our case, bilateral involvement of the hands are rarely reported. We present a case of pyoderma gangrenosum that had developed on both hands in a 66 year old man who had macrocytic,anemia. A bone marrow biopsy revealed proliferation of fibroblasts and a dense reticulin network consistent with myelofibrosis, the association of which is very rare world wide. (Kor J Dermatol 1997;35(4): 809-813)
비부식성 플럭스를 이용한 알루미늄 브레이징용 필러 소재의 저온 성형용 금속 복합 분말 개발
김대영,장하늘,윤대호,신윤호,김성호,최현주,Kim, Dae-Young,Jang, Ha-Neul,Yoon, Dae-Ho,Shin, Yun-Ho,Kim, Seong-Ho,Choi, Hyun-Joo 한국분말재료학회 (*구 분말야금학회) 2019 한국분말재료학회지 (KPMI) Vol.26 No.1
In aluminum brazing processes, corrosive flux, which is used in preventing oxidation, is currently raising environmental concerns because it generates many pollutants such as dioxin. The brazing process involving non-corrosive flux is known to encounter difficulties because the melting temperature of the flux is similar to that of the base material. In this study, a new brazing filler material is developed based on aluminum and non-corrosive flux composite powder. To minimize the interference of consolidation aluminum alloy powder by the flux, the flux is intentionally embedded in the aluminum alloy powder using a mechanical milling process. This study demonstrates that the morphology of the composite powder can be varied according to the mixing process, and this significantly affects the relative density and mechanical properties of the final filler samples.
건설정보화의 효율적 활용을 위한 국내 건설업체의 경험지식시스템(LLS) 실태 분석 및 의식조사 연구
김대영,Kim, Dae-Young 한국건설관리학회 2006 건설관리 : 한국건설관리학회 학회지 Vol.7 No.1
어떠한 조직 내의 피고용인의 지식을 도출해내고 이를 체계적으로 데이터화시키고 상용화시킨다는 것은 그 기업의 경쟁력을 향상시키는데 있어서 절대적인 요인으로 받아들여지고 있다. 특히, 건설업에 있어서 건설 프로젝트의 대규모적이고 간헐적인 건설 산업 특성상 이러한 활동은 더욱 중요한 요인으로 받아들여지고 있다. 지난 십년동안 눈부신 네트워크 기술의 발달로 건설 회사는 온라인 저장소를 활성하기 위해 지식 경영(Knowledge Management)으로 그 초점을 맞추고 있다. 하지만 회사들은 만약 온라인상의 노력이 회사의 일반적으로 컴퓨터의 사용 없이 습득된 오프라인 지식과 교감되지 않으면 실제적인 투자에 대한 회수가 초기에 기대했던 것 보다 훨씬 더 적다는 것을 깨닫기 시작했다. 따라서 이번 연구의 가장 큰 목적은 한국의 건설 산업에 기반을 두고 있는 대기업을 위한 경험지식 시스템(Lessons-Learned System)의 개념적인 모델의 발전을 위한 토대를 마련하기 위하여 이를 성공적으로 발전시키고 운영하기 위해 먼저 국내건설 대기업의 경험지식 시스템 사용실태 및 현황을 파악하는데 있다.
김대영,에브라힘,정재훈,이재원,지성현,Kim, Dae-Young,Farrokh, Ebrahim,Jung, Jae-Hoon,Lee, Jae-Won,Jee, Sung-Hyun 한국터널지하공간학회 2017 한국터널지하공간학회논문집 Vol.19 No.3
Wear prediction of TBM disc cutters is a very important issue for hard rock TBMs as number of cutter head intervention. In this regard, some model such as NTNU, Gehring model, CSM models have been used to predict disc cutter wear and intervention interval. There are some deficiencies in these models. This paper developed a new test method for wear prediction for TBM disc cutter and proposed a new abrasion index. In this regard, different abrasivity indices along with their testing methods are explained. A comparative study is performed to develop the predictability of different cutter life evaluation methods and index. The evaluation of the new methods proposed in this paper shows a very good agreement with the actual cutter life and intervention interval length. The proposed tester and index can be easily used to predict the intervention interval length and cutter wear evaluation in both planning and construction stages of a TBM tunneling project.
방추세포성 횡문근육종으로 진단된 성대 내 섬유성 종물 1예
김대영,황준하,박인서,임재열,Kim, Dae Young,Hwang, Jun-Ha,Park, In Suh,Lim, Jae-Yol 대한후두음성언어의학회 2016 대한후두음성언어의학회지 Vol.27 No.2
Rhabdomyosarcoma is an uncommon type of soft tissue malignant neoplasm characterized by undifferentiated mesodermal tissue. Sarcomas account for approximately 1% of all laryngeal neoplasm and rhabdomyosarcomas are the rarest sarcoma found in the larynx. When the sarcoma involves the larynx, radical surgery such as laryngectomy has been considered. With recent advances of combined therapy, however, it can be treated by conservative surgeries followed by postoperative radiotherapy and/or pulse chemotherapy. With reviews of literature, we report a 47-year-old patient complaining of husky voice and throat discomfort who was finally diagnosed as rhabdomyosarcoma of the vocal fold and successfully treated by laser cordectomy followed by adjuvant chemoradiotherapy.
해수의 영향에 따른 이수식 TBM의 슬러리 관리를 위한 기초적 연구
김대영,이재원,정재훈,강한별,지성현,Kim, Dae-Young,Lee, Jae-won,Jung, Jae-Hoon,Kang, Han-Byul,Jee, Sung-Hyun 한국터널지하공간학회 2017 한국터널지하공간학회논문집 Vol.19 No.3
벤토나이트는 물과 접촉하면 팽창하고 점성을 발휘하는 성질이 있어 일반적으로 차수가 필요한 토목공사에 많이 활용되고 있다. 이수식 TBM에서는 이와 같은 성질을 활용하여 가압된 슬러리로 불투수성 막을 형성하고 굴착벽면의 붕괴를 방지하는 동시에 굴착된 버력을 운송하며 굴착을 수행한다. 하지만 벤토나이트는 해수와 접촉할 경우 팽창성이 저하되어 그 성질을 발휘하지 못하는 문제가 있다. 이는 해수 조건에서 이수식 TBM으로 터널을 굴착할 시 지하수 유입 증가로 인한 굴착 안정성 및 버력 배출에 문제를 초래할 수 있다. 본 연구에서는 이수식 TBM으로 터널을 굴착 시 해수의 유입으로 인한 슬러리의 상태변화를 살펴보고 이에 대응하기 위한 슬러리 관리방안을 제시 하였다. 이를 위해 현장에서 적용된 슬러리 품질관리 기준을 바탕으로 실내 시험을 수행하였으며, 해수의 영향이 있는 현장에 적용 할 수 있는 방안을 제시하였다.
프리팹 교량 거더 (노듈러 거더)의 적시 시공을 위한 공기-비용 알고리즘 개발
김대영,정태원,김량균,Kim, Dae-Young,Chung, Taewon,Kim, Rang-Gyun 한국건설관리학회 2023 건설관리 : 한국건설관리학회 학회지 Vol.24 No.3
건설업의 경우 공사기간 내에 최소한의 수수료로 완제품을 인도할 수 있도록 공정과 원가의 관계를 적절히 분배해야 한다. 이때 교량의 크기, 공법, 공장의 환경과 생산능력, 운송거리 등을 고려해야 한다. 그러나 공사기간 중 발생하는 다양한 원인으로 인해 공사지연, 공사비 상승, 품질 및 신뢰성 저하 등의 문제가 발생하고 있다. 따라서, 기존의 방식에서 탈피하기 위해서는 체계적이고 과학적인 시공기술과 공정관리 기술이 필요하다. 프리팹(Pre - Fabrication)은 공장에서 제작하여 현장에서 시공하는 대표적 OSC(Off-Site Construcation) 공법이다. 본 연구에서는 프리팹 교량 거더인 Nodular 거더의 공정관리를 위한 자원 및 공정계획 최적화 시스템 개발이다. 인력, 장비 동원 계획의 다양한 변수를 자동으로 테스트하여 최적의 값을 도출하는 시뮬레이션 알고리즘을 개발한다. 그리고, 건설 중인 파주-포천 고속도로 건설공사(3공구) 도하 4교에 알고리즘을 적용하여 그 결과를 비교한다. 건설공사 표준품셈을 근거로 액티비티 카드에 실제 투입된 인력, 장비 종류, 수량 등을 적용하고, 작업량, 자원계획, 자원소요량을 반영했다. 향후 다양한 현장 데이터를 포함한 예측기법을 적용하여 프로그램의 정확도를 높일 계획이다. In the case of the construction industry, the relationship between process and cost should be appropriately distributed so that the finished product can be delivered at the minimum fee within the construction period. At that time, it should be considered the size of the bridge, the construction method, the environment and production capacity of the factory, and the transport distance. However, due to various reasons that occur during the construction period, problems such as construction delay, construction cost increase, and quality and reliability degradation occur. Therefore, a systematic and scientific construction technique and process management technology are needed to break away from the conventional method. The prefab(Pre-Fabrication) is a representative OSC (Off-Site Construction) method manufactured in a factory and constructed onsite. This study develops a resource and process plan optimization system for the process management of the Nodular girder, a prefab bridge girder. A simulation algorithm develops to automatically test various variables in the personnel equipment mobilization plan to derive the optimal value. And, the algorithm was applied to the Paju-Pocheon Expressway Construction (Section 3) Dohwa 4 Bridge under construction, and the results compare. Based on construction work standard product calculation, actual input manpower, equipment type, and quantity were applied to the Activity Card, and the amount of work by quantity counting, resource planning, and resource requirements was reflected. In the future, we plan to improve the accuracy of the program by applying forecasting techniques including various field data.
탄성계수 불확실성을 고려한 반강접 프레임 구조의 확률적 비선형 거동 해석
김대영,노혁천,Kim, Dae Young,Noh, Hyuk Chun 한국전산구조공학회 2013 한국전산구조공학회논문집 Vol.26 No.3
In this paper, the effects of uncertain material constant on the nonlinear behavior of steel frames with semi-rigid joints are examined. As to the probabilistic model, a normal distribution is assumed to simulate the uncertain elastic modulus of steel material. A nonlinear structural analysis program, which can consider both semi-rigidity in joints of the steel frames and uncertainty in the material constant, is developed. Including the geometric, material and connection nonlinearites which are the parameters of nonlinear behavior of steel frames, probabilistic analysis is conducted based on the Monte-Carlo simulation. In the probabilistic analyses, we consider the three different cases for random variables. The deterministic analysis results are shown to be in good agreement with those of the previous research results in the literature. As to the probabilistic analyses, it is observed that the coefficient of variation(COV) of displacements increases as the loading increases, and that the values of COV are dependent on the structural features of the frames.