http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
조업 조건에 따른 이트륨 옥살레이트 결정의 성장 메카니즘 및 속도
성민현,김우식,김준수 慶熙大學校 材料科學技術硏究所 1998 材料科學技術硏究論集 Vol.11 No.-
Crystal growth of Yttrium oxalate seed crystals in supersaturated solutions has been studied EDTA titration method. Growth rate for Yttrium oxalate crystals was determined from de-supersaturation curve of solution in agitated reactor. Change of growth mechanism and rate of yttrium oxalate crystals on agitation speed and concentration of additive were investigated. Experimental method are suggested to determin the parameters in the simple two-step model and factors which influence the mass-transfer and surface-reaction coefficients are identified. Then the controlling step of crystal growth process is judged from the effectiveness factor. Firstly, growth rate was increased with increasing agitation speed, but exponential constant wasn't change with increasing agitation speed. As this result, linear growth rate were first-order at high supersaturation, that is, growth rate controlled due to mass trasfer step in high supersaturation solution. Finally, studing on effect of additive, growth rate were decreased with increasing concentration of additive, but exponential constant were increased. Then the individual rate constants, kd and kr, were determined from the simple two-step model. In addition, using effectiveness factors, growth rate were measured of the degree of mass-trasfer or surface-reaction control.
성민현(Seong, Min-Hyun),이균태(Lee, Kyun Tae),김진국(Kim, Jin Kook) 한국콘크리트학회 2021 한국콘크리트학회 학술대회 논문집 Vol.33 No.2
이 연구에서는 원자력발전소 격납 건물 포스트텐셔닝 시스템에 사용되는 강연선의 부식 상태를 판단하기 위하여 실험적 방식의 연구가 수행되었다. 그리스로 충진된 포스트텐션 덕트의 경우 허용 가능한 수준에서 강연선의 긴장력을 풀고, 덕트 내부의 그리스를 제거하여 강연선을 적출하는 방식으로 부식 여부를 판단하고 있으나, 이 연구에서는 전위차 데이터를 통해 강연선의 부식 상태를 판단하는 것을 목표로 한다. 시험 결과 정상 강연선과 부식된 강연선간의 전위차 데이터가 서로 차이가 있음을 확인하였다. In this study, experimental method was conducted to detecting corrosion of strand using in the Post-Tensioning System at a Newclear power plant. For post-tension duct filled with grease, corrosion detecting was conducted by relaxing strand, removing grease and extracting strand. But in this study, corrosion detecting is conducted by taking measurement of potential defference of strand. As a result of the test, it was confirmed that the potential difference between the normal and corroded strand was different from each other.
초기 결함에 따른 복부-하부 플랜지 용접부에 개구부를 갖는 H형 보의 휨 거동
성민현 ( Seong¸ Min-hyun ),박가윤 ( Park¸ Gayoon ),김진국 ( Kim¸ Jin-kook ) 한국구조물진단유지관리공학회 2023 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.27 No.2
복부-하부 플랜지 용접부에 개구부를 갖는 H형 보는 기존 용접 H형 보 대비 용접선의 길이를 감소시킬 수 있어 용접에 의한 열변형 감소에 효과적이나, 제작 과정 중 발생하는 초기 결함의 크기를 예측하기 힘들다는 한계가 존재한다. 초기결함의 크기는 용접 부재의 구조 성능에 큰 영향을 미치므로, 이 연구에서는 초기결함이 복부-하부 플랜지 용접부에 개구부를 갖는 H형 보의 휨 거동에 미치는 영향을 실험적, 해석적 방법으로 분석하고자 한다.