Accuracy of cardiac output measurements during off-pump coronary artery bypass grafting: according to the vessel anastomosis sites

Sung Yong Park,Dae Hee Kim,Han Bum Joe,Ji Young Yoo,Jin Soo Kim,Min Kang,Yong Woo Hong 대한마취통증의학회 2012 Korean Journal of Anesthesiology Vol.62 No.5

Background: During beating heart surgery, the accuracy of cardiac output (CO) measurement techniques may be influenced by several factors. This study was conducted to analyze the clinical agreement among stat CO mode (SCO), continuous CO mode (CCO), arterial pressure waveform-based CO estimation (APCO), and transesophageal Doppler ultrasound technique (UCCO) according to the vessel anastomosis sites. Methods: This study was prospectively performed in 25 patients who would be undergoing elective OPCAB. Hemodynamic variables were recorded at the following time points: during left anterior descending (LAD) anastomosis at 1 min and 5 min; during obtuse marginal (OM) anastomosis at 1 min and 5 min: and during right coronary artery (RCA) anastomosis at 1 min and 5 min. The variables measured including the SCO, CCO, APCO, and UCCO. Results: CO measurement techniques showed different correlations according to vessel anastomosis site. However, the percent error observed was higher than the value of 30% postulated by the criteria of Critchley and Critchley during all study periods for all CO measurement techniques. Conclusions: In the beating heart procedure, SCO, CCO and APCO showed different correlations according to the vessel anastomosis sites and did not agree with UCCO. CO values from the various measurement techniques should be interpreted with caution during OPCAB. Background: During beating heart surgery, the accuracy of cardiac output (CO) measurement techniques may be influenced by several factors. This study was conducted to analyze the clinical agreement among stat CO mode (SCO), continuous CO mode (CCO), arterial pressure waveform-based CO estimation (APCO), and transesophageal Doppler ultrasound technique (UCCO) according to the vessel anastomosis sites. Methods: This study was prospectively performed in 25 patients who would be undergoing elective OPCAB. Hemodynamic variables were recorded at the following time points: during left anterior descending (LAD) anastomosis at 1 min and 5 min; during obtuse marginal (OM) anastomosis at 1 min and 5 min: and during right coronary artery (RCA) anastomosis at 1 min and 5 min. The variables measured including the SCO, CCO, APCO, and UCCO. Results: CO measurement techniques showed different correlations according to vessel anastomosis site. However, the percent error observed was higher than the value of 30% postulated by the criteria of Critchley and Critchley during all study periods for all CO measurement techniques. Conclusions: In the beating heart procedure, SCO, CCO and APCO showed different correlations according to the vessel anastomosis sites and did not agree with UCCO. CO values from the various measurement techniques should be interpreted with caution during OPCAB.

Corrosion Behavior of Hastelloy C-276 for Carbon-anode-based Oxide Reduction Applications

Jeon, Min Ku,Kim, Sung-Wook,Choi, Eun-Young Korean Radioactive Waste Society 2020 방사성폐기물학회지 Vol.18 No.3

The corrosion behavior of Hastelloy C-276 was investigated to identify its applicability for carbon-anode-based oxide reduction (OR), in which Cl₂ and O₂ are simultaneously evolved at the anode. Under a 30 mL·min^-1 Cl₂ + 170 mL·min^-1 Ar flow, the corrosion rate was less than 1 g·m^-2·h^-1 up to 500℃, whereas the rate increased exponentially from 500 to 700℃. The effects of the Cl₂-O₂ composition on the corrosion rate at flow rates of 30 mL·min^-1 Cl₂, 20 mL·min^-1 Cl₂ + 10 mL·min^-1 O₂, and 10 mL·min^-1 Cl₂ + 20 mL·min^-1 O₂ with a constant 170 mL·min^-1 Ar flow rate at 600℃ was analyzed. Based on the data from an 8 h reaction, the fastest corrosion rate was observed for the 20 mL·min^-1 Cl₂ + 10 mL·min^-1 O₂ case, followed by 30 mL·min^-1 Cl₂ and 10 mL·min^-1 Cl₂ + 20 mL·min^-1 O₂. The effects of the chlorine flow rate on the corrosion rate were negligible within the 5-30 mL·min^-1 range. A surface morphology analysis revealed the formation of vertical scratches in specimens that reacted under the Cl₂-O₂ mixed gas condition.

Reduction of Bacillus cereus Contamination in Biofilms on Stainless Steel Surfaces by Application of Sanitizers and Commercial Detergent

Lee, Min-Jeong,Ha, Ji-Hyoung,Kim, Yong-Su,Ryu, Jee-Hoon,Ha, Sang-Do The Korean Society for Applied Biological Chemistr 2010 Applied Biological Chemistry (Appl Biol Chem) Vol.53 No.1

We established the effectiveness of a washing, detergent and sanitizer treatments for reducing Bacillus cereus (B. cereus) contamination in biofilms on stainless steel surfaces. A water treatment did not affect biofilms and chlorine treatments at 200 ppm for 10 min and 300 ppm for 5 min, iodophor at 200 ppm for 10 min, and QAC at 400 ppm for 10 min were used to eliminate all B. cereus cells. B. cereus cells after detergent treatment were eliminated by chlorine at 100 ppm for 10 min, 200 ppm for 5 min, and 300 ppm for 3 min, and with iodophor at 100 ppm for 10 min and 200 ppm for 10 min, and QAC at 400 ppm for 10 min.

Corrosion Behavior of Inconel X-750 for Carbon Anode Oxide Reduction Application

Jeon, Min Ku,Kim, Sung-Wook,Lee, Sang-Kwon,Choi, Eun-Young Korean Radioactive Waste Society 2020 방사성폐기물학회지 Vol.18 No.3

The corrosion behavior of the Inconel X-750 alloy was investigated for its potential application under a Cl₂-O₂ mixed gas flow in an Ar atmosphere. The corrosion rate was found to be negligible at temperatures up to 400℃ under a flow rate of 30 mL·min^-1 Cl₂ + 170 mL·min^-1 Ar, whereas an exponential increase was observed in the corrosion rate at temperatures greater than 500℃. The suppression of the corrosion reaction due to the presence of O₂ was verified experimentally at flow rates of 30 mL·min^-1 Cl₂ (4.96 g·m^-2·h^-1), 20 mL·min^-1 Cl₂ + 10 mL·min^-1 O₂ (2.02 g·m^-2 ·h^-1), and 10 mL·min^-1 Cl₂ + 20 mL·min^-1 O₂ (1.34 g·m^-2·h^-1) under a constant Ar flow rate of 170 mL·min^-1 at 600℃ for 8 h. The surface morphology analysis results revealed that porous surfaces with tunnel-type holes were produced under the Cl₂-O₂ mixed-gas condition. Furthermore, the effects of the Cl₂ flow rate on the corrosion rate were investigated, indicating that its impact was negligible within the range of 5-30 mL·min^-1 Cl₂ at 600℃.

[논문]Operational Characteristics of CO2 Laser Adopted by Superposing-Discharge

Hee-Je Kim,Hyun-Ju Chung,Byoung-Dae Min,Jong-Han Joung,Sung- lun Park 釜山大學校生産技術硏究所 2003 生産技術硏究所論文集 Vol.62 No.-

오늘날 현저한 CO2 레이저의 응용 추세에 발맞추어 보다 다양한 형태의 출력 제어 기술이 대두되고 있다. 본연구에서는multi-Pulse Superposing-Discharge 기술을 이용하여 다양한형태의 CO2 레이저의 펄스를 성형 하였다. 펄스 성형을 위한 방법으로 PIC one-chip microprocessor를 이용하여 삼중 PFN 모률의 SCR을 각각 고유의 지연시간을 가지도록 제어하였다. 실험에 사용된 삼중 PFN 모률의 전원 회로는 각각 캐패시터 인덕터,SCR,고압 펄스 트랜스 그리고 고압 트랜스 2차측에 브릿지 정류기로 구성 하였다. 고압 펼스 트랜스의 1차측을 제어하므로서 PFN 모률의 동작을 저 전압에서 수행 할 수 있다. 트랜스의 2차측에 연결된 전파 정류기는 펄스 에너지를 부하에 지속적으로 전달한다. 본 연구에서는 삼중 PFN 모률의 각각의 SCR을 다른 시간 가격을 두고 트리거 하므로서 다양한 Long pulse shaping을 실현하였다. 또한 약 250-1000μs 의 주기를 가지는 다양한 펄스형 레이저 빔을 얻었다.

태연혈(太淵穴)의 유침 시간에 따른 체온 변화 -적외선체열촬영(赤外線體熱撮影)을 중심으로-

이봉효 ( Bong Hyo Lee ),이경민 ( Kyung Min Lee ),박지하 ( Ji Ha Park ),김민서 ( Min Seo Kim ),김산들 ( San Deul Kim ),박병규 ( Byeong Gyu Park ),양현동 ( Hyun Dong Yang ),예성호 ( Sung Ho Yea ),이호정 ( Ho Jung Lee ),최재원 ( Jae 경락경혈학회 2012 Korean Journal of Acupuncture Vol.29 No.2

Objectives: This study was performed to find the desirable remaining time of needle in the acupuncture treatment. Methods: The 21 volunteers were given acupuncture at LU9 vertically and needles were remained for 2 min, 10 min, 15 min, 30 min, respectively. The thermographic change induced by acupuncture was measured with Digital Infrared Thermographic Image at the following acupoints: LU11, LU10, LU9, LU8, LU5, LU1, and PC7. The statistical significance of thermographi change was evaluated using paired t-test and post hoc Wilcoxon test. Results: The most significant changes after acupuncture were produced when needles were remained for 10 min or 15 min. LU11, LU5, LU1, and PC7 were the point at which all of the remaining time produced significant change commonly. At LU11, the biggest change was produced when needle was remained for 15 min, while at LU5, LU1, and PC7, the biggest change was produced when needle was remained for 30 min, and the smallest change was produced when needle was remained for 10 min at all of acupoints of LU11, LU5, LU1, and PC7. The unbalance between left side and right was decreased the most largely in 15 min group. Conclusions: The results of this study suggest that the desirable remaining time of acupuncture needle might be 15 min.

Disruption of rsmA Gene of Pectobacterium carotovorum subsp. carotovorum LY34 and Effect on Pathogenicity

Kim, Min Keun,Kang, Tae Ho,Kim, Sung Kyum,Jeong, Yu Seok,Yun, Han Dae,Kim, Hoon The Korean Society for Applied Biological Chemistr 2012 Applied Biological Chemistry (Appl Biol Chem) Vol.55 No.6

The rsmA gene was cloned from soft-rot bacterium Pectobacterium carotovorum subsp. carotovorum LY34 (Pcc LY34), and its role in pathogenicity was investigated by marker exchange mutagenesis. From a cosmid library of Pcc LY34 genomic DNA, a positive clone carrying the rsmA gene was selected, and the gene was cloned by polymerase chain reaction (PCR) amplification. The gene is 186 bp in size and encodes a protein of 62 amino acids with a predicted molecular mass of 6,839 Da. The calculated pI of the RsmA is 8.16. The phylogenetic tree showed that the RsmA of Pcc LY34 appeared genetically identical to the CsrA of Pectobacterium atrosepticum SCRI1043 (100% identity) and similar to the CsrA of Yersinia pestis KIM10+(98.3%). The gene was disrupted by the $Km^r$ gene, and the cells became mutated (i.e., $RsmA^-$ mutant). The pathogenicity test revealed that the disease rating of the $RsmA^-$ mutant only differed slightly from that of the wild type on a slice of potato tuber and a Chinese cabbage stalk. These results suggest that RsmA is not an essential factor for the pathogenicity of Pcc LY34 and that the rsmA gene of Pcc LY34 is not completely derepressed in the $RsmA^-$ mutant for virulence-related genes, contrary to the results of Erwinia carotovora subsp. carotovora $RsmA^-$ mutant, which proved hypervirulent for celery petioles. These results showed that the microenvironmental conditions of the host and/or strain of pathogen are important for the coordination of virulence gene expression.

Effects of Ethanol Addition on the Efficiency of Subcritical Water Extraction of Proteins and Amino Acids from Porcine Placenta

Sung Hee Park,Jae Hyeong Kim,Sang Gi Min,Yeon Ji Jo,Ji Yeon Chun 한국축산식품학회 2015 한국축산식품학회지 Vol.35 No.2

In a previous study, hydrolysates of porcine placenta were obtained and the extraction efficiency for proteins and amino acids was compared between sub- and super-critical water extraction systems; optimum efficiency was found to be achieved using subcritical water (170°C, 10 bar). In this study, the effects of adding ethanol to the subcritical water system were investigated. The lowest-molecular-weight extraction product detected weighed 434 Da, and the efficiency of extraction for low-molecular-weight products was increased when either the concentration of ethanol was decreased, or the extraction time was lengthened from 10 min to 30 min. The highest concentration of free amino acids (approximately 8 mM) was observed following 30 min extraction using pure distilled water. The concentration of free amino acids was significantly lower when ethanol was added or a shorter extraction time was used (p<0.05). Color change of the solution following extraction was measured. There were no significant differences in color between lysates produced with different extraction times when using distilled water (p>0.05); however, using different extraction times produced significant differences in color when using 20% or 50% ethanol solution for subcritical extraction (p<0.05). The range of pH for the hydrolysate solutions was 6.4-7.5. In conclusion, the investigated extraction system was successful in the extraction of ≤ 500 Da hydrolysates from porcine placenta, but addition of ethanol did not yield higher production of low-molecular-weight hydrolysates than that achieved by DW alone.

Optical properties of hydrogel contact lens material containing 1-vinylimidazole

Min-Jae Lee,Dong-Hyun Kim,A-Young Sung 대한시과학회 2014 대한시과학회지 학술대회 Vol.2014 No.05

Purpose: This study evaluated the physical and optical characteristics of hydrophilic contact lens polymerized with addition of 1-vinylimidazole in the basic hydrogel contact lens material, and in particular, the utility of 1-vinylimidazole as a contact lens material for ophthalmologic devices was investigated. Methods: This study used 1-vinylimidazole with the cross-linker EGDMA (ethylene glycol dimethacrylate), HEMA (2-hydroxyethyl methacrylate) and the initiator AIBN (azobisisobutyronitrile) for copolymerization. The polymerization of the contact lens material was conducted through thermal polymerization in 100°C for about 40 mins. To produce the high functional contact lenses, a cast mould method was used. Results: The physical properties of the hydrogel ophthalmic material were investigated by measuring the average value of refractive index, water content and optical transmittance. The refractive index of 1.4330~1.4408, water content of 36.10~38.59%, UV-A transmittance of 90.0~72.2% and UV-B transmittance of 88.6%~64.2% and visible ray transmittance of 89.2~91.8% were obtained. The transmittance for visible light was over 89% in all combinations with 1-vinylimidazole and the transmittance for UV reduced up to a certain level in certain combinations with 1-vinylimidazole. Conclusions: Based on the results of this study, the produced copolymer can be estimated to be suitable for use as ophthalmic lens material for UV- blocking effects.

Production of Iron-Binding Peptides from Colostral Whey by Enzymatic Hydrolysis

Sang Bum Kim,Myoung Soo Nam,Kwang Seok Ki,Hyeon Shup Kim,Min Jung Ku,Won Mo Cho 한국축산식품학회 2010 한국축산식품학회지 Vol.30 No.6

Colostral whey prepared from colostrum (pooled from first six post-partum milkings) was heated for 10 min at 100oC. Heated colostral whey was incubated with 1% enzymes (protein equivalent basis) for 15, 30, 60, 90, and 120 min at 50oC. Papain, pepsin, trypsin, and alcalase produced different degrees of hydrolysis (DH), 10.66%, 12.42%, 10.83%, and 25.31%, respectively, at an incubation time of 120 min. The SDS-PAGE reveals that significant amounts of bovine serum albumin (BSA), β-lactoglobulin (β-LG), and α-lactalbumin (α-LA) survived papain digestion. In contrast, pepsin completely removed BSA but not β-LG present in heated colostral whey. Alcalase completely eliminated BSA, β-LG, and α-LA. This differential hydrolysis was confirmed by reversed-phase HPLC analysis. Using ion-exchange chromatography, fraction-1 (F-1) was obtained from alcalase hydrolysate at a NaCl gradient concentration of 0.25 M. Reversed-phase HPLC chromatograms of alcalase F-1 showed numerous small peaks, which probably indicate that a variety of new peptides were produced. Iron content of alcalase F-1 was 28.94 ppm, which was the highest among all enzyme fractions, whereas iron content of colostral whey was 36.56 ppm. Main amino acids contained in alcalase F-1 were Thr (15.45%), Glu (14.12%), and Ser (10.39%). Therefore, alcalase can be used to generate good iron-binding peptides in heated colostral whey, and the resulting iron-binding peptides could be suitable as a value-added food ingredient for food supplements.