비규격 초음파 탐상용 표준시험편의 사용안전성 평가

권호영,임종호,강세선 한국비파괴검사학회 2000 한국비파괴검사학회지 Vol.20 No.5

표준시험편이란 재질, 형상, 치수 및 성능이 권위 있는 기관에 위해 검정된 국제적인 시험편을 말하며 이것은 탐상기의 특성시험 또는 감도조정, 시간축의 측정범위 조정에 사용된다. 그런데 이 표준시험편은 초음파탐상 결과에 아주 크게 영향을 미치는 하나의 변수로 ASTM 이나 JIS에서는 이들 표준시험편의 규격, 재질 및 성분 등을 엄격하게 규격화하고 있다. 그 이유는 이들 성질들이 감도와 분해능 및 재현성에 아주 큰 영향을 미치기 때문이다. 따라서 결함의 크기 및 치수를 정량화하고 재현성 있는 결과를 얻기 위해서는 엄격한 품질의 표준시험편이 요구되고 있다. 그러나 ASTM 또는 JIS등의 규격품들은 상당히 고가이며 시중에는 품질이 검증되지 않은 표준시험편들이 일부 사용되고 있는 실정에 있고 이들 시험편의 품질 및 사용 적합성을 재고하기 위하여 각종 규격에 비추어 보고, 규격품들과 비규격품의 각종 성질들을 비교하여 그 사용 안정성을 고찰하고자 하였다. 그 결과 비규격품들은 치수 및 성분에서 많은 문제점을 안고있으며 비규격품들을 검증없이 사용할 경우 피검물내의 결함의 위치나 크기 측정에 오차를 유발할 가능성을 확인하였다. Standard Test Block(STB) for UT(Ultrasonic Testing) is a block approved by authoritative for material, shape and quality. STB is used for characteristic tests, sensitivity calibration and control of the time base range of UT inspection devices. The material, size and chemical components of STB should be strictly controlled to meet the related standards such as ASTM and JIS because it has an effect upon sensitivity, resolution and reproductivity of UT. The STBs which are not approved are sometimes used because the qualified STBs are very expensive. So, the purpose of this study is to survey the characteristics, quality and usability of Non-Standardized Test Blocks. Non-Standardized Test Blacks did not meet the standard requirements in size or chemical components, and ultrasonic characteristics. Therefore if the Non-Standardized Test Blocks are used without being tested, it's likely to cause errors in detecting the location and measuring the size of the defects.

감마선과 Methyl Bromide 처리가 사과의 생리화학적 품질에 미치는 영향

강호진,정헌식,조덕조,변명우,최성진,최종욱,권중호 한국식품저장유통학회 ( 구 한국농산물저장유통학회 ) 2003 한국식품저장유통학회지 Vol.10 No.3

감마선(0, 0.5, 1, 2, 3 kGy) 조사와 methyl bromide(MeBr, 26 g/㎏, 4hr) 훈증 및 이들의 처리시기가 사과의 생리화학적 품질특성에 영향을 비교하여, 검역처리를 위한 ◁그림 삽입▷ (원문을 참조하세요) 감마선 조사의 응용성을 검토하였다. 감마선과 MeBr 처리에 따른 사과의 생리화학적 품질평가에서 2kGy 이상의 감마선 조사와 MeBr 훈증은 사과의 일부 생리화학적 품질특성의 변화를 촉진시키는 것으로 나타났다. 감마선과 MeBr의 처리시기별로는 수확 직후보다는 저온(0℃)에서 40일 정도 보관 후 처리한 대체적으로 품질손상이 적은 것으로 나타났다. 따라서 1kGy 이하의 감마선 조사와 지연조사는 사과 과실의 품질을 비교적 양호한 상태로 유지할 수 있어 검역처리 기술로 활용성이 있는 것으로 생각된다. 'Fuji' apples were treated by gamma irradiation (0∼3 kGy) or methyl bromide fumigation at commercial conditions (MeBr, 25 g/㎏, 4 hr) for quarantine purpose at two different treatment timing after harvest and stored under air a 0℃ for 4 months. Associated with the treatment timing of irradiation or fumigation, after 40 days of storage at 0℃ following harvest was more adequate than immediately after harvest in keeping qualities of stored apples. However, more than 2 kGy irradiation and MeBr fumigation were detrimental to physiological and chemical qualities of the fruits. These results show that less than 1 kGy irradiation at the delayed timing has a possibility to be applied as a quarantine procedure without significant changes in the quality of apples.

갱신 효율을 위한 엘리먼트 ID 상속 기반의 XML 저장

강인석,권훈,김정희,곽호영 제주대학교 공과대학 첨단기술연구소 2004 尖端技術硏究所論文集 Vol.15 No.2

In this thesis, ID inheritance storage system modelbase on XML document and information of schema element structure has proposed. proposed system parse XML document and read in DOM type then assign ID to element by using analysis module.at this time, ID assigned to child element is inherited from parent element ID and assigned ID will be saved to database as form of defined schema structure proposed for efficient search and updates of document. As results, when specific element has inserted or updated, location information are not required to configured again.

RDB 에서의 검색 효율을 위한 XML 문서 저장 모델

권훈,강인석,김정희,곽호영 제주대학교 공과대학 첨단기술연구소 2004 尖端技術硏究所論文集 Vol.15 No.2

The purpose of the paper is design and implementation of Internet-Based Real-Time Admission XML instances for purpose of information exchange are normally stored in the legacy relational database. therefore, integrations with relational database are required for effective XML applications. to support these requirements, virtual decomposition storage or decomposition storage methods which save separates structures of instances to relational database have researched. however, these storage methods contain different information of instance structure and layers which has caused difficulties to process query during search operation as well as increased overheads due to duplicate savings for separate storages. therefore, in this research, additional field of "Eltype" has introduced to previous database schema structure to integrate instance and instance structure, provide .consistent information of layers and propose storage structure to map each field to schema field of relational database. as results, XML instance and structures can be stored together to minimize overheads and required disk space. also, synchronized storage layer structure provides easier processing of search query.

전국 단위 감시체계의 현황과 전망

강성규,안연순,지영구,김형옥,하미나,권호장,백남종,김성아,홍윤철,김재용,강대희,정혜선,하은희 대한산업의학회 2001 대한직업환경의학회지 Vol.13 No.2

減價償却政策 : 加速償却을 中心으로

權純哲,姜鎬榮 慶北大學校 經商大學 經濟學科 1983 慶商大學論集 Vol.11 No.-

우리말의 자동 음소분할에 관한 연구

권호민,한학용,허강인 동아대학교 정보기술연구소 2003 情報技術硏究所論文誌 Vol.11 No.1

In this paper we used Support Vector Machines (SVMs) recently proposed as the learning method, one of Artificial Neural Network, to divide continuous speech into phonemes, an initial, medial, and final sound, and then, performed continuous speech recognition from it. Decision boundary of phoneme is determined by algorithm with maximum frequency in a short interval. Recognition process is performed by Continuous Hidden Markov Model(CHMM), and we compared it with another phoneme divided by eye-measurement. From experiment we confirmed that the method, SVMs, we proposed is more effective in an initial sound than Gaussian Mixture Models(GMMs).

Cu 촉매하에서 유기주석 화합물과 고분자에 결합된 Iodide의 Cross-Coupling 반응에 관한 연구

강석구,임권호,김재선,윤석근,윤승수 성균관대학교 기초과학연구소 1996 論文集 Vol.47 No.2

The copper iodide-catalyzed cross-coupling of polymer bound aryl iodide with organostannanesin N-methyl-2-pyrrolidone (NMP) was accomplishied smoothly in the presence of NaCl.

Flowable 및 microfill 복합레진으로 충전된 제 5급와동에서 load cycling 전,후의 미세변연누출 비교

강석호,김오영,오명환,조병훈,엄정문,권혁춘,손호현 大韓齒科保存學會 2002 Restorative Dentistry & Endodontics Vol.27 No.2

Low-viscosity composite resins may produce better sealed margins than stiffer compositions (KempScholte and Davidson, 1988; Crim, 1989). Flowable composites have been recommended for use in Class V cavities but it is also controversial because of its high rates of shrinkage. On the other hand, in the study comparing elastic moduli and leakage, the microfil had the least leakage (Rundle et al. 1997). Furthermore, in the 1996 survey of the Reality Editorial Team, microfills were the clear choice for abfraction lesions. The purpose of this study was to evaluate the microleakage of 6 composite resins (2 hybrids, 2 microfills, and 2 flowable composites) with and without load cycling. Notch-shaped Class V cavities were prepared on buccal surface of 180 extracted human upper premolars on cementum margin. The teeth were randomly divided into non-load cycling group (group 1) and load cycling group(group 2) of 90 teeth each. The experimental teeth of each group were randomly divided into 6 subgroups of 15 samples. All preparations were etched, and Single bond was applied. Preparations were restored with the following materials (n=15) : hybrid composite resin [Z250(3M Dental Products Inc. St.Paul, USA), Denfil(Vericom, Ahnyang, Korea)], microfil [Heliomolar RO(Vivadent, Schaan, Liechtenstein), Micronew(Bisco Inc. Schaumburg, IL, USA)], and flowable composite[AeliteFlo(Bisco Inc. Schaumburg, IL, USA), Revolution(Kerr Corp. Orange, CA, USA)]. Teeth of group 2 were subjected to occlusal load (100N for 50,000 cycles) using chewing simulator(MTS 858 Mini Bionix Ⅱ system, MTS Systems Corp., Minn, USA). All samples were coated with nail polish 1mm short of the restoration, placed in 2% methylene blue for 24 hours, and sectioned with a diamond wheel. Enamel and dentin/cementum margins were analyzed for microleakage on a sclale of 0 (no leakage) to 3 (3/3 of wall). Results were statistically analyzed by Kruskal-Wallis One way analysis, Mann-Whitney U-test, and Student-Newmann-Keuls method. (p=0.05) Results: 1. There was significantly less microleage in enamel margins than dentinal margins of all groups. (p<0.05) 2. There was no significant difference between six composite resin in enamel margin of group 1. 3. In dentin margin of group 1, flowable composite had more microleakage than others but not of significant differences. 4. There was no significant difference between six composite resin in enamel margin of group 2. 5. In dentin margin of group 2, the microleakage were R>A=H=M>D>Z. But there was no significant differences. 6. In enamel margins, load cycling did not affect the marginal microleakage in significant degree. 7. In dentin margins, load cycling did affect the marginal microleakage only in Revolution. (p<0.05)

사과 열과(裂果)의 원인과 그 방지에 관한 연구

권병규,강영호,이우승,성민웅,한강원 경북대학교 1971 生産技術 Vol.5 No.-

On the basis of our hypothesis about the causes of cracking has obtained in our 1969's study, we investigated the relations among the cracking and the microelements, the environmental factors, and the treatment of IAA and GA in two selected orchards. We analyzed and compared with the contents of microelements (Mn, B, zn, and Cu) in leaves and soils of two test orchards (Taegu and Yungju). The results of the study which the causes of cracking of apples are examined through the above three procedures, are as follows: 1. The contents of Mn in soil of Taegu test orchard were total Mn 435.9 ppm, soil sol'n Mn 6.2ppm, and total Mn 284.6 pm in leaves. That of Yungju test orchard were total Mn 595.1ppm, soil sol'n Mn 6.2ppm and total Mn 144.2ppm in leaves. Comparing with Mn optimum contents in leaves Mn contents of Taegu test orchard were higher than the optimum concentration, while those of Yungju were approximately satis-factory. 2. The contents of B in leaves were 3.7ppm in Taegu and 4.6ppm in Yungju. These contents were lower ten times than the optimum contents and were the same deficiency in both test orchards. 3. The contents of Zn in leaves were 5.7ppm in Taegu and 3.8ppm in Yungju. Those contents were both the same deficiency as comparing with the optimum contents. 4. The contents of Cu in leaves were 29.3ppm in Taegu test orchard and 10.6ppm in Yungju test orchard. Comparing with the optimum contents, the contents of Cu were excess in Taegu test orchard, while that of Cu were approximately satisfactory in Yungju 5. The diameter of Ralls apple fruits were increased 1.1% in IAA spraying treatment and 3.1% in GA spraying treatment as comparing with control group 6. The thickness of cuticle layer of Ralls apple fruits were highest and the cuticle treated with IAA and GA was thinner than the control group. 7. New branches of tree with higher cracking rate tended to decrease in length, in figure and size of leaves. 8. The change of diameter in fruits were decreased in higher cracking fruits during day and night. The change of that in IAA and GA group were increased 6.1% and 1.2% respectively compared with the control group. 9. The application of IAA and GA solution slowed the cracking rate by 2.2 and 0.8% respectively compared with the control group 10. In 1970 year the cracking rate of Ralls apple fruit were 6.53% in Taegu and 4.31% in Yungju test orchard. 11. We obtained linear regression of rate of cracking and the summation of temperature during May to August in Taegu area. The summation of temperature was 2428.1℃ during June to August in 1970. When the summation of temperature was increased more than above that of tempera ture, we could expect that it was possible to increase the rate of cracking Ralls apple. An equation in the summation of temperature and the rate of cracking fruits during May to August were obtained y=0.074x-157.50. 12. The investigation indicates that a method of preventing the cracking of Ralls apple is: a. to spray at the optimum time growth hormone which increases the elasticity and elongation of cell wall. b. to alter the composition of soil by putting the organic fertilizer deeply in the ground. c. to replace Ralls apples with new varieties which is strong against cracking and have high quality and economical productivity.