http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
실시간 AV 전송을 위한 Audio/Video Bridging 기술
위정욱,박용석,박경원,송병철,전원기 한국통신학회 2013 정보와 통신 Vol.30 No.6
최근 홈 네트워크/정보가전 기술의 비약적인 발전과 고품질 멀티미디어 콘텐츠의 보급으로 인해 네트워크 기반의 멀티미디어 전송 시스템에 대한 요구가 증가하고 있다. 이러한 요구로 인해 고품질 오디오, 비디오 데이터를 이더넷 (Ethernet) 망을 이용하여 실시간 전송할 수 있는 Audio Video Bridging(AVB) 기술이 IEEE에서 표준화 되었다. AVB 기술은 네트워크를 통해 오디오 및 비디오 데이터뿐만 아니라, 각 장치들의 제어/관리를 위한 데이터도 동시에 전송할 수 있는 기술이다. 기술 개발 초기에는 네트워크 및 오디오 전문 업체를 중심으로 오디오 전송에 특화된 AoE(Audio over Ethernet) 기술 개발이 주를 이루고 있었으나, AVB 표준화가 완료된 2011년 이후부터 AVB가 적용된 제품이 개발되고 있다. 이에 본 고에서는 네트워크를 통해 멀티미디어 데이터를 전송할 때 필요한 핵심 요소기술과 개발 동향에 대해 살펴보고, IEEE 표준인 AVB 기술에 대해 알아본다.
위정욱,조용수 중앙대학교정보통신연구소 2000 정보통신연구소논문집 Vol.2 No.1
본 논문에서는 Zipper 방식의 VDSL(Very High Bit-rate Digital Subcriber Line) 시스템에서 cyclic extension을 효율적으로 구현할 수 있는 기법을 제안하고, 전형적인 전화채널 환경 하에서 제안된 방식의 성능을 분석한다. Zipper 방식에서는 각 DMT(Discrete-MultiTone) 블록에 cyclic prefix(CP)와 cyclic suffix(CS)가 추가로 사용되는데, 여기서 CP는 심볼간 간섭과 부채널간 간섭을 방지하기 위하여 삽입되며, CS는 upstream과 downstream 부반송파간의 직교성을 유지하기 위하여 추가되어 near-end crosstalk(NEXT)을 방지한다. 그러나 VDSL 시스템의 송신단에서 CP를 구현하기 위해서는 각 DMT 심볼의 뒷부분을 DMT 심볼의 앞으로 삽입하기 위한 추가적인 하드웨어가 요구된다. 본 논문에서는 CP를 구현하는데 필요로 되는 하드웨어 복잡도(메모리와 처리지연)를 줄이기 위하여 CS만을 사용하는 Zipper방식의 VDSL 시스템을 제안한다. 컴퓨터 모의 실험을 통하여 제안된 방식이 전형적인 채널환경 하에서 CP와 CS를 둘다 사용하는 기존 Zipper방식의 VDSL 시스템과 비교하여 매우적은 하드웨어를 사용함에도 불구하고 동일한 전송능력을 갖게 됨을 보인다. In this paper, we propose an efficient implementation technique for cyclic extension in VDSL(Very High Bit-rate Digital Subscriber Line) systems using Zipper duplexing and analyze its performances under typical telephone channel environments. In Zipper-based VDSL systems, each DMT(discrete multitone) block is appended by both cyclic prefix(CP) and cyclic suffix(CS). The CP is inserted to prevent both intersymbol interference (ISI) and interchannel interference (ICI), while the CS is appended to ensure orthogonality between the upstream and downstream carriers, thus preventing near-end crosstalk(NEXT). However, in order to implement the CP in the transmitter side of the VDSL system, an additional hardware is required to append the latter part of each DMT symbol to the beginning of the DMT symbol. In this paper, we propose a VDSL system with Zipper duplexing using only CS to reduce hardware complexity (memory and processing delay) required for implementation of CP. It is shown by computer simulation that the proposed approach has the same capacity under typical channel evironments as the previous Zipper-based VDSL system using both CP and CS, even with a significantly lower hardware complexity.
효율적 Cyclinc Extension을 갖는 Zipperqkdtlr의 VDSL 모뎀
위정욱 한국통신학회 2000 韓國通信學會論文誌 Vol.25 No.10
In this paper we propose an efficient implementation technique for cyclic extension in VDSL(Very High bit-rate Digital Subscriber Line) systems using Zipper duplexing and analyze its performances under typical telephone channel environments. In Zipper-based VDSL systems each DTM(discrete-multitone) block is appended by both cyclic prefix(CP) and cyclic suffix(CS). The CP is inserte to prevent both intersymbol interference (ISI) and iterchannel interference (ICI) while the CS is appended to ensure orthogonality between the upstream and downstream carriers thus preventing near-end crosstalk (NEXT). However in order to implement the CP in the transmitter side of the VDSL system an additional hardware is required to append the latter part of each DMT symbol to the beginning of the DMT symbol. In this paper we propose a VDSL system with Zipper duplexing using only CS to reduce hardware complexity (memory and processing delay) required for implementation of CP. It is shown by computer simulation that the proposed approach has the same capacity under typical channel environments as the previous Zipper-based VDSL system using both CP and CS. even with a significantly lower hardware complexity.
위정욱,김일현,최병호 대한기계학회 2023 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.37 No.2
Under certain condition, high density polyethylene exhibits unique discontinuous slow crack growth patterns owing to a process zone in front of the crack tip. Additionally, it undergoes stress corrosion cracking in the oxidative environment, which significantly reduces its lifetime. In this study, a theoretical model describing the stress corrosion crack growth behavior of cracked round bar specimens is developed. The proposed model simulates the discontinuous slow crack growth behavior under fatigue loading within an oxidative environment. The diffusion of the oxidant at the crack tip and the mechanochemical degradation of the process zone medium are simulated. The proposed model is validated via a parametric study performed on several input parameters, as well as via a comparison with experimental results.
Crack Layer 이론을 이용한 배관용 고밀도 폴리에틸렌의 응력부식균열 진전 및 수명 예측 모델
위정욱,최병호,Wee, Jung-Wook,Choi, Byoung-Ho 한국압력기기공학회 2015 한국압력기기공학회 논문집 Vol.11 No.2
In many cases, the field fracture mechanism of the thermoplastic pipe is considered as either brittle or environmental fractures. Thus the estimation of the lifetime by modeling slow crack growth considering such fracture mechanisms is required. In comparison of the some conventional and empirical equations to explain the slow crack growth rate such as the Paris' law, the crack layer theory can be used to simulate the crack and process zone growth behaviors precisely, so the lifetime of thermoplastic pipe can also be accurately estimated. In this study, the modified crack layer theory for the stress corrosion cracking (SCC) of high density polyethylene is introduced with detailed algorithm. The oxidation induction time of the HDPE is also considered for the reduction of specific fracture energy during exposed to chemical environments. Furthermore, the parametric study for an important SCC parameter is conducted to understand the slow crack growth behavior of SCC.