동강의 어류상과 생태학적 군집분석

최준길 ( Jun Kil Choi ),오사무미타무라 ( Osamu Mitamura ),이동준 ( Dong Jun Lee ),신현선 ( Hyun Seon Shin ) 한국환경생태학회 2008 한국환경생태학회지 Vol.22 No.6

2006년 5월부터 2007년 5월까지 동강의 어류상과 생태학적 군집분석을 조사한 결과는 다음과 같다. 조사된 어종은 총 10과 31종이었다. 총 31종의 어종 중 일차담수어가 26종, 주연성 담수어가 5종으로 나타나 일차담수어의 구성비가 매우 높았다. 우점종은 참갈겨니(Zacco koreanus) 55.73%, 아우점종은 쉬리(Coreoleuciscus splendidus) 7.15%였으며, 우세종은 배가시리(Microphysogobio longidorsalis) 6.12%, 어름치(Hemibarbus mylodon) 4.87%, 참종개(Iksookimia koreensis) 4.49% 등이었다. 한국고유종은 묵납자루(Acheilognathus signifer), 줄납자루(A. yamatsutae), 가는돌고기(Pseudopungtungia tenuicorpus), 쉬리(C. splendidus), 긴몰개(Squalidus gracilis majimae) 그리고 어름치(H. mylodon) 등 19종(61.29%)으로 고유종의 빈도가 매우 높았으며, 천연기념물이 1종, 환경부지정 멸종위기 야생동물 II급 종이 5종으로 각각 확인되었다. 예상되는 종수(기대종)의 분석 결과, 동강의 전 조사지점에서는 18(지점 4, 5)∼22종(지점 3)이 서식하고 있을 것으로 나타났으며, 유사도 분석은 62.28%(지점 1과 2)∼84.13%(지점 1과 5)의 범위로 나타났다. 따라서 동강유역은 어류가 서식하기에 매우 적합한 수환경을 유지하고 있으며, 각 조사지점별 수환경도 매우 유사한 것으로 판단된다. The ichthyofauna and ecological community analysis in the Dong River, Korea, were investigated from May, 2006 to May, 2007. During the surveyed period, 31 species belonging 9 families were collected. Total of 31 species(primary freshwater: 26 species, peripheral freshwater: 5 species) were found with the primary freshwater fishes being highest. Dominant species was Zacco koreanus(55.73%), and subdominant species was Coreoleuciscus splendidus(7.15%). Also, Microphysogobio longidorsalis (6.12%), Hemibarbus mylodon(4.87%), Iksookimia koreensis(4.49%) were numerous. There were 19 Korean endemic species(61.29%), including Acheilognathus signifer, A. yamatsutae, Pseudopungtungia tenuicorpus, C. splendidus, Squalidus gracilis majimae, H. mylodon. Among them, 1 species was identified as qualifying for possible desigantion as a natural monument catergory, and 5 species were identified for designation required to protect under a wildlife category. As result of expected number of species according to rarefaction curve, the expected species of the Dong-river ranged from 19(St. 4, 5) to 22(St. 3) and result of similarity analysis ranged from 62.28%(St. 1 and 2) to 84.13%(St. 1 and 5). In conclusions, we could define that the Dong-river has a very good water conditions as habitat of fish, and habitat conditions also are very similar in every survey sites.

韓國河川의 流出率과 流出指標로서의 洪水直前 流量

金熙鍾,柳又秀,金佳鉉,申東守,韓健模,全裕燦 東亞大學校 大學院 1984 大學院論文集 Vol.9 No.-

This paper is a study on relation between run-off ratio and antecedent discharge, run-off ratio and antecedent discharge per unit area, antecedent discharge and antecedent precipitation, by the data from the five major river basins in Korea and the small river basins in Pusan. The Nak-Dong rivers(An-Dong upper stream) f=0.4780+0.0124 ln qA r=0.99 qA=0.3368e0.1101R r=0.99 f=0.5793+0.0146 ln(qA/A) r=0.99 The Nak-Dong rivers except Ga-song station f=0.2017-0.0840 ln qA r=0.75 f=0.7012+0.0750 ln(aA/A) r=0.71 The Han rivers f=-0.0035+01267 on qA r=0.75 f=1.1311+0.1263 ln(qA/A) r=0.71 L=302.9064-43.8490 ln qA r=0.84 The Geun rivers(Mu-sin Cheon) f=0.295+0.1823 ln qA r=0.93 f=0.8417+0.1823 ln(qA/A) r=0.93 L=40.0456+62.0346 ln qA r=0.94 The Yeong-san rivers f=0.3766+0.0598 ln qA r=0.79 f=0.8084+0.0599 ln(qA/A) r=0.79 The Seom-jin rivers f=-1.3875+0.6505 ln qA r=0.92 f=2.1633+0.3465 ln(qA/A) r=0.76 Small river basin in Pusan f=0.3635+0.1120 ln qA r=0.87

유도형 변위 센서의 전기 노이즈 분석과 센서 성능에 미치는 영향 고찰

신우철,홍준희,이동주 한국공작기계학회 2003 한국공작기계학회 추계학술대회논문집 Vol.2003 No.-

Noise is a problem in many electronic circuits and active control system. Arising from spuriously coupled noise from other circuits, it corrupts the signal of interest and introduces an uncertainty into information it contains. In this paper, we have researched noise characteristics of the inductive displacement sensor which has been designed. we first present basic concept and characteristics of magnetic field-coupled noise in the sensor output signal. Then, we are present relation noise and sensor performances. Finally, we concentrate low noise design of a sensor driver and a signal detection circuit.

복합 운동프로그램이 초등학생의 신체구성, 혈중지질 및 체력에 미치는 영향

전종귀,이왕록,박희근,정준현,이영란,신동원,이경숙 충남대학교 체육과학연구소 2006 體育科學硏究誌 Vol.23 No.1

The purpose of the present study was to examine the effects of combined training on the changes of body composition, blood lipid profile and fitness in elementary school students. Thirty subjects participated in the present study. The subjects were divided into two groups either exercise group for 10weeks(15n) or control group for 10weeks(l5n) The results were described as follows; 1) There were significant differences in the body weight and lean body mass after the exercise program between two groups. 2) There were no significant differences in the blood TC, HDL-C, LDL-C, TG concentration after the exercise program between two groups. 3) There were significant differences in the sit-up and flexibility after the exercise group between two groups. In conclusion, it might be thought that the combined training improved the levels of body composition and health-related fitness in elementary subjects.

자동차 배기시스템의 배압특성에 관한 실험적연구

신동륜,이준서,차경옥 명지대학교 산업기술연구소 2001 産業技術硏究所論文集 Vol.20 No.-

Based on Experimental analysis, the characteristics of back pressure in automotive exhaust system is tested for 4-stroke gasoline engine. The back pressure in automotive exhaust system is generated by resistance working of exhaust system, i.e. exhaust manifold, pipe length, pipe banding, difference system pressure with atmospheric pressure. This paper contains experimental results which are tested for the change of exhaust pipe length and torque change are tested under experimental conditions.

Office 정보 업무공간의 정보공유공간에 관한 연구

신동준 청주대학교 예술문화연구소 2002 淸藝論叢 Vol.20 No.-

Information working area has to bo a space not just for improving business efficiency in industrial society but for developing efficiency in working in harmony with the information and structural aspects based on computer and communication technology. There are two kinds of environmental elements of working space : the tangible ones are the area and the structure of working space, lights, network, layout and information machines in office, the intangible ones are a feeling of satisfaction of management and arrangement of office information machines capability of information delivery, common ownership of documents and their files, the security and connection between office workers, and harmony. According to the wave of information begun from the late twentieth century, structural layout of working area has become various by the working type through network of new developed information communication machines. But it is hard to apply them in actually.

자율신경계의 활성도 측정을 위한 Data Acquisition System의 개발 및 임상응용

신동구,박종선,김영조,심봉섭,이상학,이준하 영남대학교 기초/임상의학연구소 2001 Yeungnam University Journal of Medicine Vol.18 No.1

Background: Power spectrum analysis method is a powerful noninvasive tool for quantifying autonomic nervous system activity. In this paper, we developed a data acquistion system for estimating the activity of the autonomic nervous system by the analysis of heart rate and respiratory rate variability using power spectrum analysis. Materials and methods: For the detection of QRS peak and measurement of respiratory rate from patient's ECG, we used low-pass filter and impedance method respectively. This system adopt an isolated power for patient's safety. In this system, two output signals can be obtained: R-R interval(heart rate) and respiration rate time series. Experimental ranges are 30∼240 BPM for ECG and 15∼80 BPM for respiration. Regults: The system can acquire two signals accurately both in the experimental test using simulator and in real clinical setting. Conclusion: The system developed in this paper is efficient for the acquisition of heart rate and respiration signals. This system will play a role in research area for improving our understanding of the pathophysiologic involvement of the autonomic nervous system in various disease states.

귀농자의 귀농동기 및 배경특성 분석

신윤철,배성의,김동섭,윤준상 公州大學校 産業開發硏究所 1998 産業開發硏究 Vol.6 No.-

본 연구에서는 귀농자수가 점점 늘어나고 있는 사회현상에 관심을 가지고 귀농자들의 귀농동기 및 귀농배경에 대한 특성을 조사 분석하여 귀농자들의 성공적인 영농 정착을 위한 방안을 제시하려는데 있으며 그 결과는 다음과 같다. 첫째, 귀농자의 개인적 특성으로 연령분포를 보면 전체 귀농자 중 30대 이하가 60.1%로 젊음층 귀농자가 가장 높은 분포를 보였고, 학력별로는 중졸이하가 35.6%로 가장 높았다. 귀농 년도별로는 ’97~’98. 3월까지 귀농자가 38.7%로 가장 많았으며 귀농시기에 따라 최근에 가까울수록 귀농자수는 늘어나고 있었다. 연령별, 학력별 집단과 귀농 이유간에는 차이가 있었고 귀농 연도별 귀농 이유와는 집단간에 차이가 있음을 발견하지 못하였다. 귀농지역은 고향이 84%로 연고가 있는 지역으로 귀농한 자가 많았으며 귀농 전 도시 생활연수는 6~10년 이하가 29.5%, 11~20년 이하가 28.8%로 대부분을 차지하였다. 둘째, 귀농동기 및 배경적 특성 분석 결과를 보면 귀농하게 된 이유는 앞으로 농촌 전망이 밝아 농업에 종사하기 위해서 30.1%로 가장 높았으며 연령별로 보면 30대가 38.8%로 높은 분포를 이루었고 학력 분포로는 중졸자의 도시소득 미흡을 제외하고는 차이가 없었다. 귀농 시기별로는 ’94년 이전은 도시소득 미흡으로 귀농한 자가 많았고 ’94년 이후는 농업에 확고한 신념을 갖고 영농에 종사하려고 귀농한 자가 많았다. 귀농 전 직업은 회사원이 41.7%로 가장 높았는데 연령별로는 40대 이하는 회사원, 50대 이상은 자영업이 많았다. 학력은 중졸이하자와 대졸이상자는 자영업, 고졸과 전문대졸 출신자는 회사원이 많았고 귀농시기별로는 ’96년 이전 귀농자는 자영업, ’97년 이후는 회사원이 많았다. 연령별, 학력별, 귀농시기별 집단은 귀농 전 직업과 차이가 있음을 발견하지 못하였다. 귀농하는데 권유 또는 영향을 준 사람은 본인 스스로 귀농 결정이 55.2%로 가장 높고 귀농 전 농촌사정 아는 정도는 알고 귀농한 농가가 73.6%로 높게 나타났다.

고출력 레이저에 의한 이종금속 용접특성

신호준,유영태,임기건,안동규 한국공작기계학회 2004 한국공작기계학회 추계학술대회논문집 Vol.2004 No.-

For many years and primarily for economical reasons, Dissimilar Metal Welds have been used as transition joints in a variety of equipment and applications. But Dissimilar Metal Welds have several fabrication and metallurgical drawbacks that can often lead to in-service failures. In this paper, the laser weldability of STS304 stainless steel and SM45C at dissimilar metal welds using a continuous wave Nd:YAG laser are experimentally investigated. An experimental study was conducted to determine effects of welding parameters, on eliminating or reducing the extent welding zone formation at dissimilar metal welds and to optimize those parameters that have the most influence parameters such as focus length, power, beam speed, shielding gas, and wave length of laser were tested.

SM45C의 레이저 표면경화특성

신호준,유영태,안동규,임기건 한국공작기계학회 2005 한국공작기계학회 춘계학술대회논문집 Vol.2005 No.-

Laser surface hardening is an effective technique used to improve the tribological properties and also to increase the service life of automobile components such as camshafts, crankshatfs, lorry brake drums and gears. High power CO₂ lasers and Nd:YAG lasers are employed for localized hardening of materials and hence are of potential application in the automobile industries. The heat is conducted rapidly into the bulk of the specimen causing self quenching to occur and the formation of martensitic structure. In this investigation, the microstructure features occurring in Nd:YAG laser hardening SM45C steel are discussed with the use of optical microscopic and scanning electron microscopic analysis. Moreover, This paper describes the optimism of the processing parameters for maximum hardened depth of SM45C steel specimens of 3mm thickness by using CW Nd:YAG laser. Travel speed was varied from 0.6m/min to 1.0m/min. The maximum hardness and case depth fo SM45C steel are 780Hv and 0.4mm by laser hardening.