Space holder 방법으로 제조된 다공질 타이타늄의 기계적 성질에 대한 Computed-Tomography를 이용한 유한요소해석

이동준,안동현,이병갑,정지원,오상호,이종수,김형섭,Lee, Dong Jun,Ahn, Dong-Hyun,Lee, Byounggab,Jeong, Jiwon,Oh, Sang Ho,Lee, Chong Soo,Kim, Hyoung Seop 한국분말야금학회 2013 한국분말재료학회지 (KPMI) Vol.20 No.5

In this study, porous titanium samples were manufactured by space holder methods using two kinds of urea and sodium chloride space holders. Three-dimensional pore structures were obtained by a computed-tomography (CT) technique and utilized for finite element analysis in order to investigate the mechanical properties. The CT-based finite element analyses were in better agreement with the experimental results than unit cell model-based analyses. Both the experimental and CT-based results showed the same tendency that the elastic modulus decreased with increasing the porosities. The total porosity of the bulk body plays a key role in determining the elastic modulus of porous materials.

동강의 어류상과 생태학적 군집분석

최준길 ( Jun Kil Choi ),오사무미타무라 ( Osamu Mitamura ),이동준 ( Dong Jun Lee ),신현선 ( Hyun Seon Shin ) 한국환경생태학회 2008 한국환경생태학회지 Vol.22 No.6

2006년 5월부터 2007년 5월까지 동강의 어류상과 생태학적 군집분석을 조사한 결과는 다음과 같다. 조사된 어종은 총 10과 31종이었다. 총 31종의 어종 중 일차담수어가 26종, 주연성 담수어가 5종으로 나타나 일차담수어의 구성비가 매우 높았다. 우점종은 참갈겨니(Zacco koreanus) 55.73%, 아우점종은 쉬리(Coreoleuciscus splendidus) 7.15%였으며, 우세종은 배가시리(Microphysogobio longidorsalis) 6.12%, 어름치(Hemibarbus mylodon) 4.87%, 참종개(Iksookimia koreensis) 4.49% 등이었다. 한국고유종은 묵납자루(Acheilognathus signifer), 줄납자루(A. yamatsutae), 가는돌고기(Pseudopungtungia tenuicorpus), 쉬리(C. splendidus), 긴몰개(Squalidus gracilis majimae) 그리고 어름치(H. mylodon) 등 19종(61.29%)으로 고유종의 빈도가 매우 높았으며, 천연기념물이 1종, 환경부지정 멸종위기 야생동물 II급 종이 5종으로 각각 확인되었다. 예상되는 종수(기대종)의 분석 결과, 동강의 전 조사지점에서는 18(지점 4, 5)∼22종(지점 3)이 서식하고 있을 것으로 나타났으며, 유사도 분석은 62.28%(지점 1과 2)∼84.13%(지점 1과 5)의 범위로 나타났다. 따라서 동강유역은 어류가 서식하기에 매우 적합한 수환경을 유지하고 있으며, 각 조사지점별 수환경도 매우 유사한 것으로 판단된다. The ichthyofauna and ecological community analysis in the Dong River, Korea, were investigated from May, 2006 to May, 2007. During the surveyed period, 31 species belonging 9 families were collected. Total of 31 species(primary freshwater: 26 species, peripheral freshwater: 5 species) were found with the primary freshwater fishes being highest. Dominant species was Zacco koreanus(55.73%), and subdominant species was Coreoleuciscus splendidus(7.15%). Also, Microphysogobio longidorsalis (6.12%), Hemibarbus mylodon(4.87%), Iksookimia koreensis(4.49%) were numerous. There were 19 Korean endemic species(61.29%), including Acheilognathus signifer, A. yamatsutae, Pseudopungtungia tenuicorpus, C. splendidus, Squalidus gracilis majimae, H. mylodon. Among them, 1 species was identified as qualifying for possible desigantion as a natural monument catergory, and 5 species were identified for designation required to protect under a wildlife category. As result of expected number of species according to rarefaction curve, the expected species of the Dong-river ranged from 19(St. 4, 5) to 22(St. 3) and result of similarity analysis ranged from 62.28%(St. 1 and 2) to 84.13%(St. 1 and 5). In conclusions, we could define that the Dong-river has a very good water conditions as habitat of fish, and habitat conditions also are very similar in every survey sites.

거대기종성 폐낭포증 1례 보고

이동준,김상형,Lee, Dong-Jun,Kim, Sang-Hyung 대한흉부심장혈관외과학회 1978 Journal of Chest Surgery (J Chest Surg) Vol.11 No.3

A case of Vanishing lung of right entire lung field in a man of 36 years of age was encountered at Dept. of Chest Surgery of Chonnam University Hospital. His chief complaints were cough, severe dyspnea and chest pain for about 14 years. Right pneumonectomy was done and gross finding was multiple chambered cysts of the right lung with thin epithelium. The review of the literatures was also done.

기관지확장증의 외과적 치료

이동준,김찬용,Lee, Dong-Jun,Chung, Chan-Yong 대한흉부심장혈관외과학회 1978 Journal of Chest Surgery (J Chest Surg) Vol.11 No.3

Sixty-one bronchiectatic patients were reviewed who were treated by surgical intervention in the Department of Thoracic and Cardiovascular Surgery, Chonnam University Hospital during the recent 14 years from January of 1965 to August of 1978. 1. Various pulmonary resection was performed; lobectomy was 55.5%, lobectomy and segmental resection 20.6%, bilobectomy 13.1%, lobectomy, segmental resection and thoracoplasty 4.9% and pneumonectomy was 3. 2%. 2. The most common associated disease was pulmonary Tbc, its frequency was 47.5% and next was chronic bronchitis [31%]. 3. The postoperative complication was observed in 19.6% [12 cases] and the most common was wound infection. 4. The possibility of recurrence was relatively high in the cases of residual lesion and it needs more intensive medical care. 5. The surgical result was satisfactory in 86.9% (53 cases), slight improvement in 4.9% (3 cases) and the mortality rate was 1.6% (1 case).

Special Report - 해외 주요 국가별 5G 추진 동향

이동준,Lee, Dong-Jun 한국정보통신기술협회 2018 TTA저널 Vol.2018 No.-

Immersion gold층의 결함 메카니즘 연구

이동준,최진원,조승현,Lee, Dong-Jun,Choi, Jin-Won,Cho, Seung-Hyun 한국마이크로전자및패키징학회 2008 마이크로전자 및 패키징학회지 Vol.15 No.3

ENIG 층의 결함구조를 이해하고자 immersion gold 층의 결함을 TEM 분석을 이용하여 분석하였다. 세가지 다른 종류의 금도금액을 통하여 immersion gold 층을 얻은 후 습식적으로 TEM 시편을 만들어 이를 비교하였다 이를 통해 immersion gold 도금액의 종류에 의하여 도금막의 결함구조는 크게 영향을 받음을 확인할 수 있었다. 즉, 시안형 치환형 금도금 액을 이용하여 얻은 immersion 금도금 층인 경우에는 결정계면을 따라서 결함들이 집중적으로 존재함을 관찰할 수 있었다. 반면 유기환원제를 도금액에 첨가한 시안형 부분환원형 금도금 액을 이용하여 얻은 immersion금도금 층인 경우에는 grain boundary를 따라 존재하는 공극은 사라졌지만 $5\sim20nm$ 크기의 구형의 공극이 결정계면, 결정내를 상관하지 않고 존재하고 있음을 확인할수 있었다. 이에 비하여 아황산형 치환형 금도금 액을사용하여 얻어진 금도금 층에서는 이러한 결함들이 거의 사라지는 것을 관찰할 수 있었다. Investigation on immersion gold layers was carried out using TEM analysis for the purpose of understanding the defect of immersion gold layer. The immersion gold layers prepared with three different types of baths were observed. The results showed that the defect structure of immersion gold layer is strongly dependent on the types of gold baths. Spherical defects of average 10 nm size were located along the grain boundaries for the specimen formed at KAu$(CN)_2$ bath containing no reducing agent. In the case of the specimen processed at KAu$(CN)_2$ bath containing a reducing agent, the spherical defects of 5-10 nm size were distributed randomly in grains as well as at grain boundaries. However, such defects disappeared almost completely when $Na_{3}Au(SO_3)_2$ bath was used to fabricate an immersion gold.

수분사법으로 제조된 순철분말의 성형성에 미치는 분말크기의 영향

이동준,윤은유,김하늘,강희수,이언식,김형섭,Lee, Dong-Jun,Yoon, Eun-Yoo,Kim, Ha-Neul,Kang, Hee-Soo,Lee, Eon-Sik,Kim, Hyoung-Seop 한국분말야금학회 2011 한국분말재료학회지 (KPMI) Vol.18 No.3

In the current study, the effects of particle size on compaction behavior of water-atomized pure iron powders are investigated. The iron powders are assorted into three groups depending on the particle size; 20-45 ${\mu}M$, 75-106 ${\mu}M$, and 150-180 ${\mu}M$ for the compaction experiments. The powder compaction procedures are processed with pressure of 200, 400, 600, and 800 MPa in a cylindrical die. After the compaction stage, the group having 150-180 ${\mu}M$ of particle size distribution shows the best densification behavior and reaches the highest green density. The reason for these results can be explained by the largest average grain size in the largest particle group, due to the low plastic deformation resistance in large grain sized materials.

도로공사에서 토공장비 최적 이동을 위한 가설도로 위치선정 요소

이동준,김성근,Lee, Dong-Jun,Kim, Sung-Keun 한국건설관리학회 2022 한국건설관리학회 논문집 Vol.23 No.2

Construction industry is facing difficult challenges in terms of productivity, manpower, and industrial accidents. Currently, along with the 4th Industrial Revolution, various high-tech technologies are emerging, and efforts are being made to solve the problem by applying the technologies related to the 4th Industrial Revolution to the construction industry. As part of these efforts, research is being conducted to develop a construction equipment control system to increase productivity and safety at earthworks sites where many and various types of construction equipment are involved, and the system needs a function to increase productivity by optimizing the moving path of construction equipment. In the case of trucks, the location of the temporary road must be optimized in order to optimize the path of movement in the construction site. However, only matters related to the quality standard of temporary roads have been suggested so far, and there is no standardized process for efficiently determining the location of temporary roads. In this paper, the factors and its importance related to the location of the temporary road were identified through field surveys and interviews with experts, and a method for determining the location of the temporary road was presented. It was confirmed that the suggested method through a case study could improve the productivity of earthwork.

고진동레벨에서의 PZ - PT - PMS 계 세라믹의 압전특성

이동준,권순석,신달우,정수현,임기조 ( Dong Jun Lee,Soon Seok Kwon,Dal Woo Shin,Su Hyun Jeong,Kee Joe Lim ) 한국전기전자재료학회 1997 한국전기전자재료학회 추계학술대회논문집 Vol.1997 No.1

솔더 조인트 신뢰성 향상을 위한 무전해 니켈-도금의 표면형상 제어

이동준,최진원,조승현,Lee, Dong-Jun,Choi, Jin-Won,Cho, Seung-Hyun 한국마이크로전자및패키징학회 2008 마이크로전자 및 패키징학회지 Vol.15 No.3

With increasing use of portable appliances such as PDA and cellular phone, changing environment of applications requires higher solder joint reliability. The ENIG (Electroless Nickel Immersion Gold) process has been widely used for fine pitch SMT (Surface Mount Technology) and BGA (Ball Grid Array) packaged devices due to its benefits including excellent solderability, high uniformity and substantial legibility throughout the packaging process. Its brittle fracture of solder, however, has received increasingly attentions. It was Down that fracture brittleness is mainly related with black pad resulting from galvanic nickel corrosion and P-enriched layer formation between the IMC (Intermetallic Compounds) and electroless nickel layer. Theoretically, smooth electroless Ni layer was blown to have a advantages in minimizing the black pad phenomenon by uniform solution exchange during immersion gold plating. Nevertheless, how to control the surface morphology of electroless Ni layer has been hardly blown. This study investigates an effect of surface morphology of Cu underlayer on surface morphology of electroless Ni layer. To obtain various kinds of surface morphology of Cu layer, two types of Cu etching chemical and a number of Cu etching treatment were applied. PDA, 핸드폰과 같은 포터블 제품의 사용이 급증함에 따른 전자 제품의 사용 환경의 변화는 제품의 솔더 조인트 신뢰성을 더욱 필요로 하게 되었다. 무전해 니켈/금 도금 표면 처리는 솔더링 특성이 우수하고, 표면처리 두께가 균일하며 패키징 공정에서 사용되는 광학설비에서 인식이 잘되기 때문에 미세피치 SMT 디바이스와 BGA 기판에 폭넓게 사용되고 있다. 그러나 무전해 니켈/금 도금 표면과 솔더 계면에서 발생되는 취성 파괴가 문제점으로 지적되고 있다. 솔더의 취성 파괴는 솔더링시 금속간 화합물과 무전해 니켈층 사이에 형성된 P-rich 영역의 갈바닉 니켈 부식에 의한 black pad 현상에 기인한다. 이론적으로 평탄한 무전해 Ni표면은 무전해 금도금 과정 중 도금액의 균일하게 순환되기 때문에 black pad 발생을 억제하는 장점을 가지고 있다. 그러나 이러한 장점에도 불구하고 무전해 Ni층의 표면형상을 어떻게 제어 할지에 대한 연구는 충분히 이루어 지지 않고 있다. 본 연구에서는 Cu 하지층의 표면 형상이 무전해 Ni층의 표면 형상에 미치는 영향에 대하여 분석하였다. 이를 위해 Cu 에칭액과 Cu에칭 처리 횟수를 변화시켜 Cu 하지층의 표면 형상을 다양하게 변화시켰다.