3D 광학 스캐너를 이용한 인체모형 팬텀 표면 데이터 획득 및 X-ray 에너지의 몬테카를로 시뮬레이션(MCs)을 이용한 팬텀 선량 평가와 영상구현

신준봉(Jun-Bong Shin),이도희(Do-Heui Lee),윤경준(Kyoung-Jun Yoon),박민재(Min-Jae Park),고영문(Young-Moon Go),김성우(Sung-Woo Kim),홍승모(Seung-Mo Hong),이현철(Hyun-Cheol Lee),이의섭(Ui-Seob Lee),노선영(Seon-Yeong No),강석윤(Seok-Yoon 대한영상의학기술학회 2021 대한영상의학기술학회 논문지 Vol.2021 No.-

목 적:본 연구의 목적은 기존 컴퓨터단층촬영(Computed tomography, 이하 CT) 스캔 방법 대신 3D 광학 스캐너 (3D optical scanner)를 이용하여 인체모형 팬텀의 표면 데이터를 획득하고 기존 CT 스캔 표면 데이터와 3D 광학 스캔 표면 데이터 차이를 비교 분석하는 것이며, 3D 광학 스캔 표면 데이터를 몬테카를로 시뮬레이션(Monte Carlo Simulation, MCs)에 적용하여 일반 촬영 에너지조건으로 팬텀 선량 평가와 영상 구현을 연구하는 것입니다. 연구방법: 일반촬영의 선량 평가를 위해 환자 표면 데이터를 얻을 때 3D 광학 스캐너를 활용할 것을 제안합니다. 우리는 3D 광학 스캐너(Go!SCAN SPARKTM, CREAFORM) 사용하여 기존 CT 스캔 방법을 대신해 인체모형 팬텀의 표면 데이터를 얻었습니다. 3D 스캔 표면 데이터를 정렬하고 편집하기 위해 Meshlab 프로그램을 이용하였으며, 3D slicer 프로그램을 이용하여 CT 스캔 표면 데이터와 3D 스캔 표면 데이터 차이를 정량적으로 비교분석 하였습니다. 또한 3D 스캔 표면 데이터 분석 프로그램(VXelements, CREAFORM)을 사용하여 인체 모형 팬텀의 재현성을 평가 하였습니다. SpekCalc 프로그램을 이용하여 X-ray beam 에너지 스펙트럼을 계산하고 Geant4 기반의 MCs인 TOPAS를 이용하여 X-ray Beam을 모델링 하였습니다. 인체모형 팬텀을 MCs에 적용 하여 일반촬영 에너지 조건으로 팬텀 선량을 평가하고 Phase space data 통해 영상을 구현을 연구 하였습니다. 결 과:3D slicer를 이용한 CT 스캔 표면 데이터와 3D 광학 스캔 표면 데이터의 정량적 비교 분석에서 Hounsdroff distance는 Average 2.45 mm, Dice coefficient는 0.97로 나타나 CT 스캔 표면 데이터와 3D 스캔 표면 데이터가 거의 일치하는 것을 확인할 수 있었습니다. 또한 인체모형 팬텀 재현성 평가에서 인체모형 팬텀의 AP position, RAO position, LAO position 기준으로 팔이 있는 팬텀의 error distribution은 2 mm 오차 범위에서 평균 89.78%가, 4 mm 오차 범위에서 96.05%가 일치하는 것으로 나타났으며, 팔을 제외한 경우 error distribution은 2 mm 오차 범위에서 평균 96.48%가, 4 mm 오차 범위에서 99.45%가 일치하는 것으로 나타나 3D 광학 스캐너의 표면 데이터 재현성이 우수한 것으로 나타났습니다. 인체모형 팬텀을 이용한 3D 스캔 표면 데이터를 MCs에 적용하여 전신일반촬영 에너지 조건으로 팬텀선량 평가가 가능하며, Phase space data 통해 영상을 구현할 수 있다는 것을 확인 하였습니다. 결 론:본 연구에서 3D 광학 스캐너를 사용한 인체모형 팬텀 데이터 획득은 기존 CT scan 방식보다 간편하고 방사선 노출 없이 다양한 위치와 균일한 표면 구조의 정보를 정밀하게 얻을 수 있으며 MCs을 이용한 선량계산이 가능하며, Phase space data 통해 영상을 구현이 가능함에 따라 앞으로 일반촬영 분야의 활용과 선량평가에 매우 유용할 것으로 생각 됩니다. Purpose:The purpose of this work is to acquire surface data of anthropromophic phantom using 3D optical scanner instead of conventional computed tomography (CT) scanning methods and to compare the differences between existing CT scan surface data and 3D optical scan surface data. also it is to apply 3D optical scan surface data to Monte Carlo simulations (MCs) to study whether phantom dose evaluation and image implementation are possible under general shooting energy conditions. Targets and Methods:We suggest utilizing a 3D optical scanner when obtaining patient surface data for dose evaluation of normal photography. We obtained surface data of anthropromophic phantom instead of conventional CT scanning methods using 3D optical scanners (Go!SCAN SPARKTM, CREAFORM). The Meshlab program was used to sort and edit 3D scan surface data, and the CT scan surface data and 3D scan surface data differences were quantitatively compared using the 3D slicer program. The reproducibility of the dummy phantom was also evaluated using the 3D Scan Surface Data Analysis Program (VXelements, CREAFORM). Using the SpekCalc program, the X-ray beam energy spectrum was calculated and the X-ray beam was modeled using TOPAS, a Geant4-based MCs. We applied the anthropromophic phantom to MCs evaluate the phantom dose in X-ray energy conditions and study whether the image can be implemented through phase space data. Result:Quantitative comparative analysis of CT scan surface data and 3D optical scan surface data using 3D slicer showed that Hounsdroff distance was Average 2.45 mm and Dice coefficient was 0.97, indicating a close match between CT scan surface data and 3D scan surface data. In addition, the anthropromophic phantom reproducibility assessment shows that the error distribution of the phantom with arms by AP position, RAO position, and LAO position of the anthropromophic phantom averaged 89.78% in the 2 mm error range and 96.05% in the 4 mm error range. MCs using anthropromophic phantom confirmed that 3D scan surface data can be applied to Monte Carlo simulation to evaluate phantom dose under X-ray energy conditions through phase space data. Conclusion:In this study, anthropromophic phan tom data acquisition using 3D optical scanners is simpler than conventional CT scan methods, provides precise information of various locations and uniform surface structures without radiation exposure, enables dosing using MCs, and enables image implementation through phase space data.

특발성 경련질환으로 오인된 원발성 부갑상선기능저하증 1례

신성하,최정영,김준기,고영춘,조상욱,김순호,임중규 全南大醫大 2001 전남의대학술지 Vol.37 No.1

서울의 Penicillinase Producing Neisseria Gonorrhoeae 발생빈도(1994)

김재홍,안진균,정성재,김영태,김중환,김시영,이석종,이홍렬,서호석,김경훈,권혁진,정우권,고우석,이용석,안필수,오준규,오용섭 대한화학요법학회 1996 대한화학요법학회지 Vol.14 No.1

Background : In recent years gonorrhoea has been panendemic and remains one of the most common Sexually Transmitted Diseases in the world, especially in developing countries. Objective & Method : For the detection of a more effective therapeutic regimen and assessing the prevalence of Penicillinase Producing Neisseria Gonorrhoeae(PPNG), Ive have been trying to study the patients who have visited the VD Clinic of Choong-Ku Public Health Center in Seoul since 1980 by means of the chromogenic cephalosporin method. Results : In 1994, 168 strains of N. gonorrhoeae were isolated, among which 109 (64,9% ) were PPNG. Conclustion : Our results suggests that the prevalence of PPNG in Seoul is still increasing.

에어리프트 펌프를 이용한 정밀여과막 세척

이준호,김명호,고대현 韓國交通大學校 2022 한국교통대학교 논문집 Vol.57 No.-

The MBR method, also known as the membrane separation active sludge method, does not require a precipitation tank and has many advantages such as stable discharging water. The biggest disadvantages of the MBR method, which has many advantages, are maintenance problems due to reduced flux due to fouling, decreased processing efficiency, and membrane replacement. In this study, in order to reduce membrane pollution, membrane cleaning was performed using the washing principle of the airlift pump, and shear force according to the amount of air was analyzed using the Ansys Fluent computational fluid dynamics program. As a result of the analysis, the film recovery rate was 93.8% to 97.3% and the average was 95.8%, and the CFD analysis showed the highest shear force at about 5.425×10-2Pa at 10m3/m2/hr. It is believed that the MBR device using Airlift in this study can maximize the flux recovery rate by reducing the problem of membrane contamination.

고 탁도 건설 폐수 응집 특성 분석

이준호, 김명호, 고대현 韓國交通大學校 2020 한국교통대학교 논문집 Vol.55 No.-

In this study, we tried to find an efficient coagulation agent by comparing and analyzing the coagulation properties of each coagulation agent by conducting a Jar-test on various coagulation agents used for the efficient treatment of high turbidity construction wastewater. The Jar test was conducted with wastewater with a turbidity of 1,150 NTU and SS 1500 mg/L using yellow soil. PACS-2, PACSS, PACSM, PACS300, Chitosan, and Alum were tested in Jar-test and the turbidity, pH, SS, standing analysis, filtration time, etc. were analyzed to compare the cohesive characteristics of each floc. PACS-2 ranges from turbidity 36.9~124 NTU (average 82.24 NTU), pH 6.934~7.100 (average 7.025) and SS 20~70 mg/L (average 45.2 mg/L). PACSS appeared to range from turbidity 6.59~59.3 NTU (average 21.29 NTU), pH 5.166~7.010 (average 6.331), and SS 6~28 mg/L (average 13.6 mg/L). Also PACSM was found to range from turbidity 4.16~94 NTU (average 35.18 NTU), pH 5.742~6.908 (average 6.582), and SS 4~118 g/L (average 34 mg/L). PACS300 ranged from turbidity 5.22~85.7 NTU (average 31.07 NTU), pH 5.968~6.875 (average 6.603) and SS 4~66 mg/L (19.6 mg/L on average). Chitosan was found to be in the range of turbidity 7.3~50.1 NTU (19.58 NTU on average), pH 6.738~7.097 (6.900 on average), and SS 4~32 mg/L (13.6 mg/L on average). Finally, the Alum was found to range from turbidity 22~217 NTU (average 132.72 NTU), pH 6.878~7.113 (average 6.984), and SS 22~224 mg/L (average 115.2 mg/L). As a result of the experiment, Chitosan is considered to have a high coagulation characteristics as a coagulation agent of high turbidity construction wastewater due to low change in pH and excellent coagulation characteristics.

카오스 특징 추출에 의한 스테인레스강의 재질 열화 평가

고준빈,오상균,김기길 大田産業大學校 1998 한밭대학교 논문집 Vol.15 No.1

This study proposes the analysis method of time series ultrasonic signal using the chaotic feature extraction for degradation extent evaluation The features extracted from time series data using the chaotic time series signal analyzes quantitatively degradation extent. For this purpose, analysis objective in this study is correlation dimension, lyapunov exponent, strange attractor on hyperspace. The lyapunov exponent is a measure of the rate at which nearby trajectories in phase space diverge. Chaotic trajectories have at least one positive lyapunov exponent. The correlation dimension appears as a metric space such as the phase space trajectory of a dynamical system. In this experiment, correlation(fractal) dimensions, lyapunov exponents, energy variation showed values of 2.217~2.423, 0.097~0.154, 1.601~1.476 voltage according to degardation extent. The proposed chaotic feature extraction in this study can enhance the degree of precise evaluation of the degraded materials(SA508 CL.3).

mSQL을 이용한 데이터베이스 구현

고성현,조준익 群山大學校 情報通信技術硏究所 1999 情報通信技術硏究論文集 Vol.3 No.-

These days, Internet is a fantastic business in the world, We realized a sample Database using mSQL which is freeware in the academy. In realization, we tested a sample program in the Web browser. Also HTML is acted well in the Web browser. The Web programming which tested in this paper was very simple and easy. We tested a datagram to upload, modify, and delete in the Web browser.

거푸집공사 위험성 평가에 관한 연구

고성석,오준호 한국산업안전학회 2002 한국안전학회지 Vol.17 No.3

The object of risk assesment is to prevent the accident from arising. The main reason for risk assesment of construction work is to determine priority order of improvement plan about risky work. Formwork is a complicated process that determines the total duration of apartment construction, and occupies 10~15% of total construction expense, and 17% of serious accidents occur during formwork. So, formwork occupies very importment roles in work sites, economical efficiency and safety. We need to identify the work type with a high risk of accidents, and to establish suitable safety counterplan and implement intensive safety management.

소아에서 출혈을 동반한 단일 연소성 용종의 내시경적 절제술

김준기,조상욱,신성하,고영춘,최정영,서강석,강명원,임연근,여향순,김경수 全南大醫大 2001 전남의대학술지 Vol.37 No.3

가토의 뇌동맥류 모형에서 모동맥 및 동맥류 협자에 따른 동맥류 내압의 변화 :기초 연구

김은영,송준혁,김명현,박향권,김성학,신규만,박동빈 대한신경외과학회 1999 Journal of Korean neurosurgical society Vol.28 No.4