특수 언어발달 장애 환아의 임상 및음향음성학적 특성연구

김연희,박세훈,신용일,김찬양,김현기,김정수 大韓再活醫學會 2000 Annals of Rehabilitation Medicine Vol.24 No.1

우리나라 논 관개용 지하수 수질 특성

김진호,조광래,임수정,이경자,경기천,엄미정,김희권,김찬용,이영한,이신찬,윤순강 한국환경농학회 2003 한국환경농학회지 Vol.22 No.4

This study was carried out to evaluate the status of the groundwater quality for paddy fields irrigation in Korea. Water samples were collected at 130 sites throughout the country. Samples were collected at three seasons-April, July and October-in 2000. According to our survey, the groundwater was found to be suitable for irrigation purpose. Average EC was shown 0.286 dS/m. Nitrate-nitrogen and Cl^(-) concentration was 5.6 ㎎/L, 32.95 ㎎/L which satisfied the Korean Standards for Irrigation Water. Nitrate-nitrogen concentration in each province was shown as following orders: Jeju (11.17 ㎎/L) > Chungnam (8.16 ㎎/L) > Gyeongbuk (6.64 ㎎/L) > Gyounggi (5.91 ㎎/L) > Chungnam (4.95 ㎎/L) > Gyeongnam (3.91 mgk) > Jeonbuk (3.50 ㎎/L) > Jeonnam (3.27 ㎎/L) > Gangwon (2.91 ㎎/L). The concentration by sampling seasons were October (6.62 ㎎/L) > July (5.88 mg&) > April (4.78㎎/L). As the soil of Jeju Province is usually derived from volcanic ash soils mainly used for upland drops, it may influence the nitrate-nitrogen concentration of groundwater. The amount of rainfall also influence the water quality. But the COD_(Cr), were shown April (3.17㎎/L) > July (2.91 ㎎/L) > October (2.40 ㎎/L), it is highly related in the basal dose of organic matter fertilizers. This study demonstrated that groundwater quality was suitable for irrigation, but continuous monitoring is recommended for agricultural policy and developing OECD agricultural environment indicators.

선택적 후근절제술의 수술중 근전도 감시방법과 치료효과

김형일,김연희,김완호,김근수,김동찬 대한신경외과학회 1996 Journal of Korean neurosurgical society Vol.25 No.10

Selective posterior rhizotomy(SPR) has been known to reduce the spasticity as well as to improve the quality of life in patients with intractable spasticity. Twenty patients underwent SPR under intraoperative electrophysiological monitoring(IOM). Fifty-two percent of sacrolumbar rootlet were cut after electrical stimulation. Eighteen patients(90%) with spastic type of cerebral palsy showed marked reduction of spasticity and functional improvement without any complication. The patients who did not respond to SRP had mixed types of spasticity. IOM facilitate the selection of pathological rootlets regardless of anaesthetic level. intensity of electrical stimulation, and individual variability of responses. It is concluded that careful selection of surgical candidates and of pathological rootlets under IOM are important to reduce the spasticity. thereby to obtain a better outcome.

ATHB12, an ABA-lnducible Homeodomain-Leucine Zipper (HD-Zip) Protein of Arabidopsis, Negatively Regulates the Growth of the Inflorescence Stem by Decreasing the Expression of a Gibberellin 20-Oxidase Gene

Ora Son,허윤선,김윤경,이현정,김성한,김미란,남경희,이명석,김부용,박종범,박정안,이석찬,Atsushi Hanada,Shinjiro Yamaguchi,이인정,김승기,윤대진,Eva So¨derman,천충일 Sookmyung Women's University Research Institute of 2010 여성과 건강 Vol.6 No.1

항균성 펩타이드인 Mastoparan B의 살조효과

서정길,김찬희,배윤정,문호성,김근용,박희연,윤호동,김창훈,변대석,홍용기,박남규 한국어병학회 2003 한국어병학회지 Vol.16 No.3

Mastoparan B (MPB)는 벌독으로부터 정제된 양친매성α-helical 구조를 취하면서 14개의 아미노산 잔기로 구성된 염기성 항균성 펩타이드로서 여러 가지 생물막과 작용한다. 본 연구에서는 우리 나라 연안의 적조 (HABs, harmful algal blooms)를 일으키는 4종의 적조생물 (Alexandrium tamarense, Chattonella catenatum)에 대한 MPB의 살조효과를 조사하였다. MPB의 4종의 적조생물에 대한 살조효과는 31.3㎍/㎖에서 세포의 lysis또는 ecdysis와 같은 형태로 현미경으로 관찰할 수 있었다. 또한 MPB는 C. marina 및 C. polykridorides에 대해서 A. tamarense와 G. catenatum보다 더욱 강한 살조효과를 나타내었다. 이러한 MPB의 HABs에 대한 살조효과연구는 새로운 살조물질을 개발하기 위한 자료가 될 것으로 생각된다. Mastoparan B (MPB), an antimicrobial cationic peptide isolated from the venom of the hornet Vespa basalis, is a basic amphipathic a-helical peptide composed of fourteen amino acid residues. In this study, we have investigated the algicidal effect of MPB against hatmful algae blooms (HABs) casative Alexandrium tamarense, Chattonella marina, Cochlodinium polykrikoides and Gymnodinium catenatum. The algicidal effect of MPB showed in the concentration of 31.3 ㎍/㎖ to 500 ㎍/㎖ against 4 HAB species and observed cell lysis or cell ecdysis by microscopy. MPB reacted more sensitive to C. marina and C.polykrikoides than A. tamarense and G. catenatum. The algicidal study of MPB against HABs will provides much insight into development of new algicidal substances.

ATHB12, an ABA-lnducible Homeodomain-Leucine Zipper (HD-Zip) Protein of Arabidopsis, Negatively Regulates the Growth of the Inflorescence Stem by Decreasing the Expression of a Gibberellin 20-Oxidase Gene

Ora Son,허윤선,김윤경,이현정,김성한,김미란,남경희,이명석,김부용,박종범,박정안,이석찬,Atsushi Hanada,Shinjiro Yamaguchi,이인정,김승기,윤대진,Eva So¨derman,천충일 Sookmyung Women's University Research Institute of 2010 여성과 건강 Vol.6 No.1

腦의 神明機能과 腦의 호르몬 作用에 對한 文獻的 考察

金鎭炯,金允植,薛仁燦 대전대학교 한의학연구소 2002 한의학연구소 논문집 Vol.11 No.1

This thesis was written in order to help set groundwork of the mutuality between brain hormon and Shin-myung(神明) activity. 1.Shin-myung(神明) means all spiritual functions, and Shin(神) represents thinking, myung(明) represents consciounsness. 2.As a origin of Shin-myung(神明) activity, in ancient times Heart(心) was regared as one, but since Chung-Dynasty(淸朝), Brain(腦) is regared as a main controller to manage Shin(神) in human body. 3.Shin-myung(神明) activity would should between Brain(腦) and Shin-Sin(心神) 4.Hormon is chemical substance to serve convey informations and stimuiate them. In Present day Western medical science, make an attempt to understand Shin-myung(神明) activity of Brain(腦) as a activity of hormon doings. In conclusion, Shin-myung(神明) represent that Brain(腦) include Mind-Sprit(情神) activity, and it can be able by the function of brain hormon activety.

근관 세척법이 Resilon/Epiphany sealer와 Gutta-percha/AH 26 sealer의 근관 상아질과의 접착에 미치는 영향

김서경,황윤찬,황인남,오원만 大韓齒科保存學會 2008 Restorative Dentistry & Endodontics Vol.33 No.2

본 연구에서는 근관 세척법이 두 가지 근관 충전재 (Gutta-percha/AH 26 sealer, Resilon/Epiphany sealer)의 근관 상아질과의 접착메 미치는 영향을 평가하였다. 총 30개의 발거된 상악 전치를 각자 5개씩 6개의 군으로 분류하여 근관 성형을 하고 마지막 세척을 다음과 같이 시행 한 후 Gl, G2, G3군은 Gutta-percha/AH 26 sealer로, Rl, R2, R3군은 Resilon/Epiphany sealer로 근관 충전하였다. Gl, Rl군 : 5.25% NaOCl세척 G2, R2군 : 5.25% NaOCl세척 후 sterile saline 세척 G3, R3군 : 5.25% NaOCl세척 후 17% EDTA, sterile saline 순으로 세척 각 군의 충전된 치아를 아크릴 레진에 매몰하고 약 1 mm 두께로 절단한 후 만능 물성 시험기상에서 push-out bond strength를 측정하였고 실험 후 파절 양상을 Image-analyzing microscope으로 관찰하여 다음과 같을 결과를 얻었다. 1. Gutta-percha/AH 26 sealer 충전군에서 Resilon/Epiphany sealer 충전군보다 push-out bond strength가 높게 나타났다 (p < 0.05). 2. Resilon/Epiphany sealer 충전군 중 17% EDTA, sterile saline순으로 세척시 5.25% NaOCl 세척에 비해 push-out bond strength가 높게 나타났다 (p<0.05). 3.파절 양상을 분석시 모든 군은 접착성과 혼합성 파절 양상을 나타내었고, Gl, G2, Rl 군은 응집성 파절 양상이 나타나지 않았으며, Resilon/Epiphany sealer 충전군은 Gutta-percha/AH 26 sealer 충전군에 비해 응집성과 혼합성 파절 망상이 더 높은 비율로 나타났다. The purpose of this study was to evaluate whether intracanal irrigation method could affect the adhesion between intracanal dentin and root canal filling materials (Gutta-percha/AH 26 sealer and Resilon/Epiphany sealer). Thirty extracted human incisor teeth were prepared. Canals were irrigated with three different irrigation methods as a final rinse and obturated with two different canal filling materials (G groups : Gutta-percha/AH 26 sealer, R groups : Resilon/Epiphany sealer) respectively. Group Gl, Rl - irrigated with 5.25% NaOCl Group G2, R2 - irrigated with 5.25% NaOCl, sterile saline Group G3, R3 - irrigated with 5.25% NaOCl, 17% EDTA, stehle saline Thirty obturated roots were horizontally sliced and push-out bond strength test was performed in the universal testing machine. After test, the failure patterns of the specimens were observed using Image-analyzing microscope. The results were as follows. 1. Gutta-percha/AH 26 sealer groups had significantly higher push-out bond strength compared with the Resilon/Epiphany sealer groups (p < 0.05). 2. Push-out bond strength was higher when using 17% EDTA followed by sterile saline than using NaOCl as a final irrigation solution in the Resilon/Epiphany sealer groups (p < 0.05). 3. In the failure pattern analysis, there was no cohesive failure in Group Gl, G2, and Rl. Gutta-percha/AH 26 sealer groups appeared to exhibit predominantly adhesive and mixed failure patterns, whereas Resilon/Epiphany sealer groups exhibited mixed failures with the cohesive failure occurred within the Resilon substrate.

상아세관의 주행방향에 따른 상아질 접착제의 침투양상에 대한 공초점레이저주사현미경 연구

김동준,황윤찬,김선호,오원만,황인남 大韓齒科保存學會 2003 Restorative Dentistry & Endodontics Vol.28 No.5

The purpose of this study was to evaluate the penetration pattern of dentin adhesives according to the orientation of dentinal tubules with confocal laser scanning microscopy. Specimens having perpendicular. parallel and oblique surface to dentinal tubules were fabricated. The primer of dentin adhesives (ALL BOND 2, CLEARFIL SE BOND and PQ1) was mixed with fluorescent material. rhodamine B isothio cyanate (Aldrich Cherm. CO., Milw., USA), It was applied to the specimens according to the instructions of manufactures. The specimens were covered with composite resin (Estelite, shade A2) and then cut to a thickness of 500 ㎛ with low speed saw (Isomet, Buehler, USA). The adhesive pattern of dentin adhesives were observed by fluorescence image using confocal laser scanning microscopy. The results were as follows. 1. For the groups with tubules perpendicular to bonded surface, funnel shape of resin tag was observed in all specimen. However. resin tags were more prominent in phosphoric acid etching system (ALL BOND 2 and PQ1) than self etching system (CLEARFIL SE BOND). 2. For the groups with tubules parallel to bonded surface. rhodamine labeled primer penetrated into peritubular dentin parallel to the orientation of dentinal tubules. But rhodamine labeled primer of PQ1 diffused more radially into surrounding intertubular dentin than other dentin adhesive systems. 3. For the groups with tubules oblique to bonded surface. resin tags appeared irregular and discontinuous. But they penetrated deeper into dentinal tubules than other groups.

근관 충전재 및 치근단 역충전재의 방사선 불투과성에 관한 비교 연구

김용상,김서경,황윤찬,황인남,오원만 大韓齒科保存學會 2008 Restorative Dentistry & Endodontics Vol.33 No.2

This study was performed to assess the radiopacity of a variety of canal filling and retrograde root-end filling materials according to the specification concerning root canal obturation materials. Ten materials including Gutta-percha pellets, amalgam, Fuji II LC, Dyract^(ⓡ) AP, Super EBA^(ⓡ), IRM^(ⓡ) AH 26^(ⓡ), Sealapex™, Tubli-Seal™ and dentin were evaluated in this study In the first part, densitometric reading of an each step of aluminum step wedge on occlusal film were performed at 60 kVp (0.2, 0.3, 0.4 s), 70 kVp (0.2, 0.3, 0.33 s) to decide appropriate voltage and exposure time. In the second part, ten specimens which are 5 ㎜ in diameter and 0.5, 1.0, 1.5, 2.0, 2.5, 3.0 ㎜ in thickness, were fabricated from each material studied. The specimens were radiographed simultaneously with an aluminum step wedge under decided condition (60 kVp, 0.2 s). The mean radiographic density values of the materials were transformed into radiopacity expressed equivalent thickness of aluminum (㎜ Al). The following results were obtained. 1. Among the various conditions including 0.2 s, 0.3 s, 0.4 s at 60 kVp and 0.2 s, 0.3 s, 0.33 s at 70 kVp, the appropriate voltage and exposure time that meet the requirement of density from 0.5 to 2.0 was 0.2 s at 60 kVp. 2. All of the materials in this study had greater radiopacity than the minimun level recommended by ISO No. 4049 standards. 3. Most of the materials had greater radiopacity than 3 ㎜ Al requirement of ANSI/ADA specification No. 57 (2000) and ISO No. 6876 (2001) standards except for Fuji II LC and Dyract. It suggests that all experimental canal filling and retrograde root-end filling materials have a Sufficient radiopacity that meet the requirement concerning root canal obturation materials except for Fuji II LC and Dyract. 본 실험에서는 다양한 방사선 노출 조건에 따른 aluminum step wedge에 대한 광학 밀도를 알아보고, 그 중 적절한 노출조건을 선택하여 수종의 근관 충전재와 치근단 역충전재의 방사선 불투과성 정도를 굉가, 비교하였다. 방사선 불투과성의 기준을 위해 11개의 step으로 구성된 aluminum step wedge를 제작하여 , 60 kVp, 70 kVp 관전압 상태에서 각각 0.2. 0.3, 0.4초와 0.2, 0.3, 0.33초의 노출시간으로 교합 필름상에서 방사선 촬영 후 적절한 노출 조건을 구하였다. 직경 5 ㎜,각각의 두께 0.5, 1.0, 1.5, 2.0, 2.5, 3.0 ㎜인 10종 (Gutta-percha, amalgam, Super EBA^(ⓡ), MTA, IRM^(ⓡ), Fuji II LC, Dyract^(ⓡ) AP, AH 26^(ⓡ), Sealapex^(ⓡ), Tubli-Sea™의 근관 충전재와 치근단 역충전재 시편을 각 재료와 두께당 10개씩 제작한 후, 동일한 두께의 상아질 시편 , aluminum step wedge와 함께 정해진 노출조건에 따라 방사선 촬영을 하였다. 모든 필름은 자동현상기로 현상하였다. 시편의 흑화도를 densitometer (Model 07-443, Victoreen Inc, Cleveland, Ohio, USA)로 5회 반복 측정 후, 평균값을 구하여 회귀분석 후 알루미늄 두께로 환산하였다. 얻어진 정보를 분석하여 다음의 결과를 얻었다. 1. 관전압 60 kVp에서 노출시간 0.2, 0.3, 0.4초, 70 kVp에서 0.2, 0.3, 0.33초로 변화를 주어 방사선 촬영을 하였을 때, 흑화도가 0.5 - 2.5 사이여야 한다는 ISO No. 6876 규격에 가장 적합한 것은 60 kVp, 0.2초일 경우였다. 2.측정된 근관 충전재와 치근단 역충전재들의 방사선 불투과성 모두 ISO No. 4049 규격에 적합하였다. 3.광중합형 글래스 아이오노머 (Fuji II LC)와 컴포머 (Dyract)를 제외하고는 ANSI/ADA specification (2000) 또는 ISO No. 6876 (2001)규격이 제시한 최소한 3 ㎜ Al 이상의 방사선 불투과성을 지녀야 한다는 규격에 적합하였다. 이상의 결과는 본 실험에 사용된 수종의 근관 충전재와 치근단 역충전재 중 Fuji Ⅱ LC와 Dyract를 제외하고 모두 규격에 적합한 방사선 불투과성을 가지고 있음을 시사한다.