Effect of the Holding Temperature and Vacuum Pressure for the Open Cell Mg Alloy Foams

Yue, Xue-Zheng,Hur, Bo-Young Materials Research Society of Korea 2012 한국재료학회지 Vol.22 No.6

Metal foam has many excellent properties, such as light weight, incombustibility, good thermal insulation, sound absorption, energy absorption, and environmental friendliness. It has two types of macrostructure, a closed-cell foam with sealed pores and an open-cell foam with open pores. The open-cell foam has a complex macrostructure consisting of an interconnected network. It can be exploited as a degradable biomaterial and a heat exchanger material. In this paper, open cell Mg alloy foams have been produced by infiltrating molten Mg alloy into porous pre-forms, where granules facilitate porous material. The granules have suitable strength and excellent thermal stability. They are also inexpensive and easily move out from open-cell foamed Mg-Al alloy materials. When the melt casting process used an inert gas, the molten magnesium igniting is resolved easily. The effects of the preheating temperature of the filler particle mould, negative pressure, and granule size on the fluidity of the open cell Mg alloy foam were investigated. With the increased infiltration pressure, preheat temperature and granule sizes during casting process, the molten AZ31 alloy was high fluidity. The optimum casting temperature, preheating temperature of the filler particle mould, and negative pressure were $750^{\circ}C$, $400-500^{\circ}C$, and 5000-6000 Pa, respectively, At these conditions the AZ31 alloy had good fluidity and castability with the longest infiltration length, fewer defects, and a uniform pore structure.

Fluidity and Mechanical Properties of Open Cell AZ31 Mg Alloy Foam

( Xue Zheng Yue ),( Bo Young Hur ) 한국주조공학회 2012 한국주조공학회지 Vol.32 No.3

발포금속은 초경량 재료로서 폐기공과 개기공의 두 가지 형태의 구조를 지니고 있으며 폐기공은 내충격성, 흡음성, 단열성의 기능을 지니고 있고, 개기공은 필터, 생체지지대, 촉매재, 열방출재 등으로 사용되고 있다. 개기공발포재는 삼차원 구조모양으로 프리커서를 이용한 압력정밀주조나 기공입자용출법으로 제조하고 있으나 기공의 크기나 셀의 형상, 두께 등을 조절하기에 어려움이 있다. 이를 해결하기 위하여 환경친화적인 펄라이트를 사용하여 목적하는 크기의 그래뉼을 제조 한 후, 용융마그네슘합금을 감압주조법으로 주조하여 그래뉼의 크기로 기공율을 조절하고, 주형의 온도와 압력에 따른 유동의 길이를 측정하였다. 그래뉼 직경이 2.3 mmØ 일때에 주형의 온도300oC 이상, 압력이 5000 Pa 이상에서 유동길이6.5 cm이상을 얻었다.

Applications of a Deep Neural Network to Illustration Art Style Design of City Architectural

( Yue Wang ),( Jia-wei Zhao ),( Ming-yue Zheng ),( Ming-yu Li ),( Xue Sun ),( Hao Liu ),( Zhen Liu ) 한국정보처리학회 2024 Journal of information processing systems Vol.20 No.1

With the continuous advancement of computer technology, deep learning models have emerged as innovative tools in shaping various aspects of architectural design. Recognizing the distinctive perspective of children, which differs significantly from that of adults, this paper contends that conventional standards may not always be the most suitable approach in designing urban structures tailored for children. The primary objective of this study is to leverage neural style networks within the design process, specifically adopting the artistic viewpoint found in children's illustrations. By combining the aesthetic paradigm of urban architecture with inspiration drawn from children's aesthetic preferences, the aim is to unearth more creative and subversive aesthetics that challenge traditional norms. The selected context for exploration is the landmark buildings in Qingdao City, Shandong Province, China. Employing the neural style network, the study uses architectural elements of the chosen buildings as content images while preserving their inherent characteristics. The process involves artistic stylization inspired by classic children's illustrations and images from children's picture books. Acting as a conduit for deep learning technology, the research delves into the prospect of seamlessly integrating architectural design styles with the imaginative world of children's illustrations. The outcomes aim to provide fresh perspectives and effective support for the artistic design of contemporary urban buildings.

Combinatory electrospray and electrospinning to produce multi-layered membrane with enhanced mechanical property

Yue Xue,Zhiyuan Zheng,Shuwei Shen,Guangli Liu,Ronald X. Xu 대한환경공학회 2023 Environmental Engineering Research Vol.28 No.2

Electrospun nanofibrous mats (ENM) have been extensively used for removal of suspended particles, cells and bacteria in membrane filtration because of its high porosity and permeability. However, microfiltration process is driven by a certain transmembrane pressure, and the filtration performance of traditional ENM are thereby hindered by its limited mechanical property. In this study, we propose a new strategy that sandwich the ENM between two layers of electrospray-deposited microparticles to enhance the mechanical properties of ENM membrane. Through a suitable thermal treatment, the microparticles stick with each other forming firm networks, while the ENM is rarely influenced. The mechanical tests show that the tensile strength and elastic modulus of the sandwich-structure composite membrane are 5 times and 7 times higher than those of the fibrous membrane, respectively. Meanwhile, the filtration tests show that the rejection rate of the composite membrane is also higher than the fibrous membrane. Our study implies the composite membrane fabricated by layer-by-layer deposition via electrospray and electrospinning has a great potential in microfiltration applications.

Study on molten salt oxidation process of simulated Co doped cation exchange resins

Yun Xue,Yue-Lin Wang,Yu Li,Wen-Da Xu,Fu-Qiu Ma,Yang-Hai Zheng,Qing-Guo Zhang,Zhi Zhang,Mi-lin Zhang,Yong-De Yan 한국공업화학회 2023 Journal of Industrial and Engineering Chemistry Vol.126 No.-

Cation exchange resins (CERs) are widely applied to purify waste liquids generated during the operationof nuclear reactors. The radioactive nuclides 60Co and 58Co are important corrosion activation products inreactor cooling water. In this study, the simulated Co doped CERs were oxidized with ternary carbonate. According to the thermogravimetric analysis (TG), the decomposition of Co doped CERs includes threeprocesses: 1. Elimination of the osmotic water; 2. Pyrolysis of sulfonic acid group; 3. Destruction of styrene–divinylbenzene copolymer. The X-Ray Diffraction (XRD) patterns indicate that sulfur mainly exists inthe form of sulfate in waste salt. The Co2+ undergoes the path of CoS2 ? Co3O4 with the increase of temperatureand the transition point is 650 C. Combined with Fourier Transform Infrared Spectrometer (FTIR)spectra and X-ray Photoelectron Spectroscopy (XPS) analysis, sulfonic acid groups begin to decomposeat 350 C. During the molten salt oxidation process, most of the sulfur in sulfonic acid groups is entrappedby carbonate as the form of sulfate, and a little of which remains as sulfone group, sulfoxide group andsulfur bridge in residue. When the resins are oxidized at 800 C, the retention rate of Co2+ is 97.3%, indicatingthat the molten salt oxidation can effectively remain Co2+ and convert it into a more stablesubstance.

Serum Proteomics Analysis of Feline Mammary Carcinoma Based on Label-free and PRM Techniques

Jia-San Zheng,Ren-Yue Wei,Zheng Wang,Ting-Ting Zhu,Hong-Ri Ruan,Xue Wei,Kai-Wen Hou,Rui Wu 대한수의학회 2020 Journal of Veterinary Science Vol.21 No.3

Background: Feline mammary carcinoma is the third most common cancer that affects female cats. Objectives: The purpose of this study was to screen differential serum proteins in feline and clarify the relationship between them and the occurrence of feline mammary carcinoma. Methods: Chinese pastoral cats were used as experimental animals. Six serum samples from cats with mammary carcinoma (group T) and six serum samples from healthy cats (group C) were selected. Differential protein analysis was performed using a Label-free technique, while parallel reaction monitoring (PRM) was performed to verify the screened differential proteins. Results: A total of 82 differential proteins were detected between group T and group C, of which 55 proteins were down regulated and 27 proteins were up regulated. Apolipoprotein A-I, Apolipoprotein A-II (ApoA-II), Apolipoprotein B (ApoB), Apolipoprotein C-III (ApoC-III), coagulation factor V, coagulation factor X, C1q, albumen (ALB) were all associated with the occurrence of feline mammary carcinoma. Differential proteins were involved in a total of 40 signaling pathways, among which the metabolic pathways associated with feline mammary carcinoma were the complement and coagulation cascade and cholesterol metabolism. According to the Label-free results, ApoB, ApoC-III, ApoA-II, FN1, an uncharacterized protein, and ALB were selected for PRM target verification. The results were consistent with the trend of the label-free. Conclusions: This experimen is the first to confirm ApoA-II and ApoB maybe new feline mammary carcinoma biomarkers and to analyze their mechanisms in the development of such carcinoma in feline.

Influence of oxygen equivalent on molten salt oxidation efficiency of mixed resin in Li2CO3-Na2CO3-K2CO3 melt

Xin Liu,Zi-Yu Liu,Yang-Hai Zheng,Yong-De Yan,Wen-Da Xu,Yun Xue,Yue-Lin Wang,Fu-Qiu Ma,Kai Zhu,Yu-Sheng Yang 한국공업화학회 2023 Journal of Industrial and Engineering Chemistry Vol.120 No.-

The disposal of spent radioactive ion exchange resin generated during the operation of nuclear facilitieshas always been a conundrum. The molten salt oxidation (MSO) for the treatment of mixed resin (MR)shows obvious superiority. In this work, ternary carbonate (Li2CO3-Na2CO3-K2CO3) and MR was usedas the molten salt system and the oxidation target, respectively. The oxidation behavior of MR was analyzedby varying the temperature and oxygen equivalent during the MSO process. By studying the effectof different oxygen equivalents on the oxidation efficiency, the oxygen equivalent of 125% could make theoxidation efficiency of MR reach 99.99% at 800 C. The composition of C, N and S containing exhaust gasproduced through MSO process of MR with temperature were almost consistent with the simulationresults. The exhaust gas was successfully adsorbed by molten carbonate to produce nitrate and sulfurcompounds. The carbonate has good absorption to harmful gases such as SO2, CO, NO, etc. The contentof SO2 from the highest 0.32% to 0, and 71.23% of sulfur in MR was trapped by molten carbonate asthe form of sulfate. This work has important implications for reducing the potential harm of radioactivewaste resin to the environment.

Flavobacterium zhairuonensis sp. nov., a gliding bacterium isolated from marine sediment of the East China Sea

Sanjit Chandra Debnath,Ahmed Mohammed Abdo Miyah,Can Chen,Huan Sheng,Xue-Wei Xu,Yue-Hong Wu,Dao-Qiong Zheng,Jin-Zhong Xu,Ya-Nan Di,Pin-Mei Wang,Li Shen 한국미생물학회 2019 The journal of microbiology Vol.57 No.12

A yellow pigmented, Gram-stain-negative, aerobic bacterium designated A5.7T was studied to evaluate the taxonomic position following the modern polyphasic approach. The strain was isolated from sediments near Zhairuo Island, which is situated in the East China Sea. Cells were non-spore forming rods without flagella but showed motility by gliding. Growth was observed at 15–35°C (optimum 28°C), pH 6.0–9.0 (optimum pH 6.5) and 0–2% (w/v) NaCl (optimum 0–0.5%) in LB broth. The major respiratory quinone of A5.7T was menaquinone 6. The major polar lipid of A5.7T was phosphatidylethanolamine and the predominant fatty acids (> 5%) were iso-C15:0, iso-C17:0 3-OH, C15:1 ω6c, iso-C15:0 3-OH, iso-C15:1 G, summed feature 3 (C16:1 ω7c and/or C16:1 ω6c) and summed feature 9 (iso-C17:1 ω9c and/or C16:0 10-methyl). Phylogenetic analysis based on 16S rRNA gene sequences showed that the isolate belongs to the genus Flavobacterium and shares the highest sequence similarities with Flavobacterium sharifuzzamanii A7.6T (98.5%), Flavobacterium tistrianum GB 56.1T (98.3%), Flavobacterium nitrogenifigens NXU-44T (97.8%), Flavobacterium anhuiense D3T (97.6%), Flavobacterium ginsenosidimutans THG 01T (97.6%), and Flavobacterium foetidum CJ42T (97.6%). Digital DNA-DNA hybridization and average nucleotide identity values between the strain and its closest phylogenetic neighbors showed the ranges from 19.6 to 34.1% and 73.7 to 87.9%, respectively. Therefore, based on polyphasic characteristics, strain A5.7T represents a novel species of the genus Flavobacterium for which the name Flavobacterium zhairuonensis sp. nov. is proposed. The type strain is A5.7T (= KCTC 62406T = MCCC 1K03494T).

Effects of Ohmic Area Etching on Buffer Breakdown Voltage of AlGaN/GaN HEMT

Chong Wang,Xiao-Xiao Wel,Meng-Di Zhao,Yun-Long He,Xue-Feng Zheng,Wei Mao,Xiao-Hua Ma,Jin-Cheng Zhang,Yue Hao 한국전기전자재료학회 2017 Transactions on Electrical and Electronic Material Vol.18 No.3

This study is on how ohmic area etching affects the buffer breakdown voltage of AlGaN/GaN HEMT. The surfacemorphology of the ohmic metal can be improved by whole etching on the ohmic area. The buffer breakdown voltagesof the samples with whole etching on the ohmic area were improved by the suppression of the metal spikes formedunder the ohmic contact regions during high-temperature annealing. The samples with selective etching on theohmic area were investigated for comparison. In addition, the buffer leakage currents were measured on the differentradii of the wafer, and the uniformity of the buffer leakage currents on the wafer were investigated by PL mappingmeasurement.

Effects of Ohmic Area Etching on Buffer Breakdown Voltage of AlGaN/GaN HEMT

Wang, Chong,Wel, Xiao-Xiao,Zhao, Meng-Di,He, Yun-Long,Zheng, Xue-Feng,Mao, Wei,Ma, Xiao-Hua,Zhang, Jin-Cheng,Hao, Yue The Korean Institute of Electrical and Electronic 2017 Transactions on Electrical and Electronic Material Vol.18 No.3

This study is on how ohmic area etching affects the buffer breakdown voltage of AlGaN/GaN HEMT. The surface morphology of the ohmic metal can be improved by whole etching on the ohmic area. The buffer breakdown voltages of the samples with whole etching on the ohmic area were improved by the suppression of the metal spikes formed under the ohmic contact regions during high-temperature annealing. The samples with selective etching on the ohmic area were investigated for comparison. In addition, the buffer leakage currents were measured on the different radii of the wafer, and the uniformity of the buffer leakage currents on the wafer were investigated by PL mapping measurement.