Scrap iron packed in a Ti mesh cage as a sacrificial anode for electrochemical Cr(VI) reduction to treat electroplating wastewater

Ya, Vinh,Guillou, Esther Le,Chen, Yi-Ming,Yu, Jui-Hsuan,Choo, Kwang-Ho,Chuang, Sheng-Ming,Lee, Shou-Jen,Li, Chi-Wang Elsevier 2018 JOURNAL- TAIWAN INSTITUTE OF CHEMICAL ENGINEERS Vol.87 No.-

<P><B>Abstract</B></P> <P>A novel sacrificial anode comprised of scrap iron packed inside a cage made of titanium mesh was developed for Cr(VI) reduction. With electric currents applied, the surface passivation of scrap iron electrode could be avoided. Due to the large surface area with open structures provided, the applied current densities (1.18–3.54 mA/cm<SUP>2</SUP>) were low, resulting in low operating voltage and energy consumption. Complete Cr(VI) removal was achieved with electric currents applied, whereas only 20% of the Cr(VI) was removed without electricity. Direct Cr(VI) reduction on the iron surface was a dominant mechanism for the system operated at low (0.25 A) or no current. Acidic pH levels were more effective in Cr(VI) removal, due to more adsorption of Cr(VI) onto the precipitated Fe hydroxide. The trend in total Cr removal was almost the same as that of Cr(VI) removal, but time required to complete total Cr removal was extended. With intermittent electricity supply at a high electric current intensity, the energy consumption of the system was more efficient. Using scrap iron as a sacrificial anode under the intermittent current condition can save 72–77% of the total operational costs required by the conventional plate electrode.</P> <P><B>Highlights</B></P> <P> <UL> <LI> A novel anode packed with scrap iron inside a Ti mesh was used for reducing Cr(VI). </LI> <LI> Electroplating wastewater containing Cr(VI) and Ni(II) was treated. </LI> <LI> Current intensity and initial pH affect the Cr(VI) reduction pattern significantly. </LI> <LI> Intermittent but high electric current supply saved 72–77% of the operating costs. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>

A SINGLE CHIP BIPOLAR FIBER OPTIC RECEIVER SYSTEM

Li, Gabriel Ming Yu 대한전자공학회 1989 ICVC : International Conference on VLSI and CAD Vol.1 No.1

A single chip fiber optic receiver system meeting all Fiber Distributed Data interface (FDDI) token ring protocol has been designed and fabricated using a bipolar technology with polysilicon contacted base and emitter regions. The receiver consists of a differential low noise transimpedance preamplifier, a post amplifier, a DC cancellation loop, a decision circuit with hysteresis, a high speed comparator and 100K ECL output buffers. A combination of both conventional and novel circuit techniques have been used to achieve the design goals. This paper gives a performance evaluation over the worst case baseline wander test proposed by the FDDI Physical Medium Dependent (PMD) protocol.

Adaptive Multiple MPC for a Wind Farm with DFIG: a Decentralized-Coordinated Approach

LI, Xiao-ming,ZHANG, Xi,LIN, Zhong-wei,NIU, Yu-guang,LI, Ming-yang,Nathan, Noel Vishal The Korean Institute of Electrical Engineers 2016 Journal of Electrical Engineering & Technology Vol.11 No.5

Effect of Au thickness on the evolution of self-assembled Au droplets on GaAs (111)A and (100)

Li, Ming-Yu,Sui, Mao,Kim, Eun-Soo,Lee, Jihoon Springer 2014 NANOSCALE RESEARCH LETTERS Vol.9 No.1

<P>In this paper, we report the effect of Au thickness on the self-assembled Au droplets on GaAs (111)A and (100). The evolution of Au droplets on GaAs (111)A and (100) with the increased Au thickness progress in the Volmer-Weber growth mode results in distinctive 3-D islands. Under an identical growth condition, depending on the thickness of Au deposition, the self-assembled Au droplets show different size and density distributions, while the average height is increased by approximately 420% and the diameter is increased by approximately 830%, indicating a preferential lateral expansion. Au droplets show an opposite evolution trend: the increased size along with the decreased density as a function of the Au thickness. Also, the density shifts on the orders of over two magnitude between 4.23 × 10<SUP>10</SUP> and 1.16 × 10<SUP>8</SUP> cm<SUP>−2</SUP> over the thickness range tested. At relatively thinner thicknesses below 4 nm, the self-assembled Au droplets sensitively respond to the thickness variation, evidenced by the sharper slopes of dimensions and density plots. The results are systematically analyzed and discussed in terms of atomic force microscopy (AFM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), cross-sectional surface line profiles, and Fourier filter transform (FFT) power spectra.</P>

Colorectal Cancer Concealment Predicts a Poor Survival: A Retrospective Study

Li, Xiao-Pan,Xie, Zhen-Yu,Fu, Yi-Fei,Yang, Chen,Hao, Li-Peng,Yang, Li-Ming,Zhang, Mei-Yu,Li, Xiao-Li,Feng, Li-Li,Yan, Bei,Sun, Qiao Asian Pacific Journal of Cancer Prevention 2013 Asian Pacific journal of cancer prevention Vol.14 No.7

Objectives: Understanding the situation of cancer awareness which doctors give to patients might lead to prognostic prediction in cases of of colorectal cancer (CRC). Methods: Subsets of 10,779 CRC patients were used to screen the risk factors from the Cancer Registry in Pudong New Area in cancer awareness, age, TNM stage, and gender. Survival of the patients was calculated by the Kaplan-Meier method and assessed by Cox regression analysis. The views of cancer awareness in doctors and patients were surveyed by telephone or household. Results: After a median observation time of 1,616 days (ranging from 0 to 4,083 days) of 10,779 available patients, 2,596 of the 4,561 patients with cancer awareness survived, whereas 2,258 of the 5,469 patients without cancer awareness and 406 of the 749 patients without information on cancer awareness died of the disease. All-cause and cancer-specific survival were poorer for the patients without cancer awareness than those with (P < 0.001 for each, log-rank test). Cox multivariate regression analysis showed that cancer concealment cases had significantly lower cancer-specific survival (hazard ratio (HR) = 1.299; 95 % confidence interval (CI): 1.200-1.407)and all-cause survival (HR = 1.324; 95 % CI: 1.227-1.428). Furthermore, attitudes of cancer awareness between doctors and patients were significantly different (P < 0.001). Conclusion: Cancer concealment, not only late-stage tumor and age, is associated with a poor survival of CRC patients.

Association between Pax8-PPARγ1 Rearrangement and Follicular Thyroid Cancer: a Meta-Analysis

Li, Hang-Yu,Xie, Zhi-Hao,Xu, Cong-Hui,Pu, Mei-Ling,Chen, Zi-Yan,Yu, Miao,Wang, Heng-Shu,Zhou, Chen-Ming,Pu, Chao-Yu,Liu, Wei Asian Pacific Journal of Cancer Prevention 2016 Asian Pacific journal of cancer prevention Vol.17 No.9

Background: Pax8 and peroxisome proliferator-activated receptor gamma 1 gene (Pax8-$PPAR{\gamma}1$) are important factors in tumors. Several studies have suggested that follicular thyroid cancer may arise from Pax8- $PPAR{\gamma}1$ rearrangement. In order to have a better understanding of the association between Pax8-$PPAR{\gamma}1$ rearrangement and follicular thyroid cancer, we conducted the presenmt meta-analysis. Materials and Methods: The information was extracted from PubMed, EMBASE and Web of Science. Statistic analysis was performed with Stata12.0 software. Odds ratios (ORs) were calculated using a fixed-effects model. We also performed heterogeneity and publication bias analyses. Results: Nine studies including 198 follicular thyroid cancer patients and 268 controls were considered eligible. The frequency of Pax8-$PPAR{\gamma}1$ rearrangement was significantly higher in the follicular thyroid cancer group than in the control group, with a pooled OR of 6.63 (95%CI=3.50-12.7). In addition, through subgroup analysis, the OR between Pax8-$PPAR{\gamma}1$ rearrangement and follicular thyroid cancer was 6.04 (95%CI = 3.18-11.5) when using benign tumor tissues as controls. The OR for the method subgroup was 9.99 (95% CI =4.86-20.5) in the RT-PCR. Conclusions: The final results demonstrated that Pax8-$PPAR{\gamma}1$ rearrangement has significant association with follicular thyroid cancer.

Interleukin-20 targets podocytes and is upregulated in experimental murine diabetic nephropathy

Yu-Hsiang Hsu,Hsing-Hui Li,Junne-Ming Sung,Wei-Yu Chen,Ya-Chin Hou,Yun-Han Weng,Wei-Ting Lai,Chih-Hsing Wu,Ming-Shi Chang 생화학분자생물학회 2017 Experimental and molecular medicine Vol.49 No.-

Interleukin (IL)-20, a proinflammatory cytokine of the IL-10 family, is involved in acute and chronic renal failure. The aim of this study was to elucidate the role of IL-20 during diabetic nephropathy development. We found that IL-20 and its receptor IL-20R1 were upregulated in the kidneys of mice and rats with STZ-induced diabetes. In vitro, IL-20 induced MMP-9, MCP-1, TGF-β1 and VEGF expression in podocytes. IL-20 was upregulated by hydrogen peroxide, high-dose glucose and TGF-β1. In addition, IL-20 induced apoptosis in podocytes by activating caspase-8. In STZ-induced early diabetic nephropathy, IL-20R1-deficient mice had lower blood glucose and serum BUN levels and a smaller glomerular area than did wild-type controls. Anti-IL-20 monoclonal antibody (7E) treatment reduced blood glucose and the glomerular area and improved renal functions in mice in the early stage of STZ-induced diabetic nephropathy. ELISA showed that the serum IL-20 level was higher in patients with diabetes mellitus than in healthy controls. The findings of this study suggest that IL-20 induces cell apoptosis of podocytes and plays a role in the pathogenesis of early diabetic nephropathy.

Formation of Ga droplets on patterned GaAs (100) by molecular beam epitaxy

Li, Ming-Yu,Hirono, Yusuke,Koukourinkova, Sabina D,Sui, Mao,Song, Sangmin,Kim, Eun-Soo,Lee, Jihoon,Salamo, Gregory J Springer 2012 NANOSCALE RESEARCH LETTERS Vol.7 No.1

<P>In this paper, the formation of Ga droplets on photo-lithographically patterned GaAs (100) and the control of the size and density of Ga droplets by droplet epitaxy using molecular beam epitaxy are demonstrated. In extension of our previous result from the journal <I>Physical Status Solidi A</I>, volume 209 in 2012, the sharp contrast of the size and density of Ga droplets is clearly observed by high-resolution scanning electron microscope, atomic force microscope, and energy dispersive X-ray spectrometry. Also, additional monolayer (ML) coverage is added to strength the result. The density of droplets is an order of magnitude higher on the trench area (etched area), while the size of droplets is much larger on the strip top area (un-etched area). A systematic variation of ML coverage results in an establishment of the control of size and density of Ga droplets. The cross-sectional line profile analysis and root mean square roughness analysis show that the trench area (etched area) is approximately six times rougher. The atomic surface roughness is suggested to be the main cause of the sharp contrast of the size and density of Ga droplets and is discussed in terms of surface diffusion.</P>

Convenient and Robust Route to Photoswitchable Hierarchical Liquid Crystal Polymer Stripes via Flow-Enabled Self-Assembly

Li, Xiao,Li, Bo,He, Ming,Wang, Wei,Wang, Tianjie,Wang, Aurelia,Yu, Jiwoo,Wang, Zhonglin,Hong, Suck Won,Byun, Myunghwan,Lin, Shaoliang,Yu, Haifeng,Lin, Zhiqun American Chemical Society 2018 ACS APPLIED MATERIALS & INTERFACES Vol.10 No.5

<P>Hierarchically arranged stripes of photoswitchable liquid crystal polymers (LCPs) containing azobenzene moieties were conveniently crafted via a flow-enabled self-assembly (FESA). Interestingly, by subjecting a drop of LCP solution to dry in a restricted geometry comprising two nearly parallel plates with a stationary upper plate and a movable lower plate that programmably traveled in a 'stop -and-move' manner during the FESA process, photoswitchable LCP stripes were yielded, displaying two modes of deposition, namely, periodic primary stripes of large dimensions and regularly spaced secondary stripes of small dimensions situated between adjacent, primary stripes (i.e., forming hierarchical LCP stripes). Notably, these hierarchical azobenzene moieties-containing stripes demonstrated sequential photoinduced reversible phase transition (i.e., photoswitching) due to the thickness difference between primary and secondary stripes. A UV light-induced expansion effect. was observed on the LCP stripes. Clearly, such rapid creation of hierarchical stripes by FESA represents a robust means of organizing polymers, nanoparticles, colloids, DNA, etc. into complex yet ordered patterns over a large area in a simple and controllable manner for potential use in surface relief grating, photoactuators, photoswitchable devices, antifake labels, etc.</P>

Droplets to Merged Nanostructures: Evolution of Gold Nanostructures by the Variation of Deposition Amount on Si(111)

Li, Ming-Yu,Sui, Mao,Kim, Eun-Soo,Lee, Jihoon The American Chemical Society 2014 CRYSTAL GROWTH AND DESIGN Vol.14 No.3

<P>We studied the evolution of Au nanostructures in dome-shaped Au droplets that merge into Au nanostructures on Si(111) by systematically controlling the Au deposition amount (DA) under a fixed annealing temperature and annealing duration. Even under identical growth conditions, the configuration, density, and size of Au nanostructures drastically vary depending on the amount of Au deposition in the range of 0.5–20 nm. Through systematic analysis of the resulting Au nanostructures in determining the average height, density, and surface area ratio, as well as the Fourier filter transform power spectrum and cross-sectional line profiles, we clearly demonstrate the evolution process of Au nanostructures and thus the control of the size, density, and configurations. The evolution of Au droplets on Si(111) with the increased DAs initially appears to be progressing based on the Volmer–Weber growth mode for the Au DAs up to 4 nm, but with further increased DAs up to 20 nm, it turns out that the growth occurs in the Frank–van der Merwe growth mode, resulting in a layer-by-layer growth. In addition, by the sharp comparison between preannealed samples and resulting Au nanostructures, we quantitatively present the evolution of Au nanostructures. This study can find applications in nanowire fabrication on Si(111).</P><P>Even under identical growth conditions, the configuration, density, and size of Au nanostructures drastically vary depending on the amount of Au deposition in the range of 0.5−20 nm. Through systematic analysis of the resulting Au nanostructures, the evolution process of Au nanostructures and thus the control of the size, density, and configurations are clearly demonstrated.</P><P><B>Graphic Abstract</B> <IMG SRC='http://pubs.acs.org/appl/literatum/publisher/achs/journals/content/cgdefu/2014/cgdefu.2014.14.issue-3/cg401604q/production/images/medium/cg-2013-01604q_0011.gif'></P>