8-hydroxyguanine이 전립선비대증 발생에 미치는 효과

이재원,이석영,이형래,이상철,김용태,김원재 충북대학교 의학연구소 2002 忠北醫大學術誌 Vol.12 No.2

연구목적: 전립선비대증은 노화현상에 의해 발생하는 질환으로서 임상적으로 주로 50세 이상에서 증상이 나타난다. 산소 라디칼은 DNA의 염기에 다양한 손상을 미칠 수 있다. 산소 라디칼에 의한 DNA의 변화에는 여러 가지 형태가 있으며 이러한 변화들 가운데서 guanine이 8-oxoguanine (8-hydroxyguanine, oh8Gua)으로의 수산화(hydroxylation) 반응은 가장 흔히 관찰되는 형태로서 노화 및 만성 퇴행성 질환, 기타 여러 질환의 중요한 병인으로 인식되고 있다. 세포에 유해한 영향을 주는 oh8Gua의 생성으로부터 유전자를 보호하는 수복효소 중 8-oxoguanine-DNA glycosylase (OGG1)가 주된 역할을 하는 것으로 알려져 있는데 이 효소를 생산하는 유전자인 hOGG1은 사람마다 유전자형이 다르다. 따라서 본 연구에서는 전립선비대증이 노화와 관련된 hOGG1 유전자형에 따라서 발생에 차이가 있는지를 조사하였다. 대상 및 방법: 충북대학교 병원에서 전립선비대증으로 진단 받고 입원하여 경요도전립선절제술을 받은 환자로 병리 조직학적으로 전립선비대증이 확인된 81명을 환자군으로 하였으며, 충청북도내 10개 군에서 50세 이상의 건강한 성인 남자 764명을 대상으로 실시한 전립선 무료검진에서 경직장 초음파 검사상 전립선 크기 20 gm 이하, 국제 전립선 증상 점수(IPSS) 7점 이하, 요속 10 ㎖/s 이상, 전립선 특이 항원(PSA) 4.0 ng/㎖ 이하인 81명을 대조군으로 설정하였다. 이들에서 채취한 혈액에서 genomic DNA를 얻은 후 PCR-SSCP (polymerase chain reaction-single stranded conformation polymorphism), 직접 염기서열분석(direct DNA sequencing) 및 RFLP (restriction fragment length polymorphism)를 통해서 두 군 사이의 hOGG1 유전자의 다형성을 분석하였다. 결과: 대조군에서 codon 326형은 Ser326Ser형이 12례(14.8%), Ser326Cys형이 51례(63.0%), Cys326Cys형이 18례(22.2%)였으며 전립선비대증 환자군에서는 Ser326Ser형이 15례(18.5%), Ser326Cys형이 34례(42.0%), Cys326Cys형이 32례(39.5%)로 두 군 사이에 통계적인 유의성이 관찰되었다(p=0.022). 또한 Cys326Cys형과 나머지(Ser326Ser, Ser326Cys)형으로 나누어 시행한 통계 분석에서도 대조군에서는 각각 18례(22.2%), 63례(77.8%)였으며 전립선비대증 환자군에서는 32례(39.5%), 49례(60.5%)로 통계적인 유의성이 관찰되었다(p=0.017, OR=2.286, 95% CI=1.149-4.546). 결론: hOGG1 유전자의 형태와 전립선비대증의 발생과는 밀접한 관련이 있었다. 즉 hOGG1 Cys326Cys형을 가진 사람에서 전립선비대증이 발생한 가능성이 높을 것으로 사료된다. Purpose: 8-oxoguanine DNA glycosylase (OSS1) rapairs DNA by removing 8-oxoguanine (oh8Gua), a highly mutagenic oxidative DNA adduct. Recently, the human gene for OGG1 (hOGG1) was cloned and several genotypes have been reported. However, the implications of such genotypes in benign prostatic lyperplasia have not been demonstrated. To assess the involvement of hOGG1 associated with the aging process on the developing of BPH, we analyzed the genetic polymorphisms of hOGG1. Materials and Methods: We studied the hOGG1 gene polymorphisms in 81 cases of BPH and 81 cases of normal controls. We performed the SSCP, PCR-based restriction fragment length polymorphism (RFLP) and direct sequencing to characterize the genetic polymorphisms of hOGG1 in both BPH patients and controls. Results: We found two polymorphic sites. A serine326/cysteine polymorphism at codon 326 (1a type) in exon 7 was associated with an exchange of amino acid. Another polymorphic site at codon 324 (1b type) in exon 6 was silent. We found that the distribution of hOGG1 genotypes in BPH patients (Ser326Ser type 18.5%, Ser326Cys type 42.0% and Cys326Cys type 39.5%) was significantly different from that in controls (14.8%, 63.0% and 22.2%, respectively) (p=0.022). Homozygosity for the Cys326Cys genotype significantly increased the risk of developing BPH, with the odds ratio (OR) being 2.286 (95% confidence interval [CI]=1.149-4.546) Conclusion: Our results suggest that the hOGG1 Cys326Cys genotype might play a important role in the development of BPH.

추황배(Pyrus pyrifolia Nakai cv. Chuhwangbae) 과피로부터 1종의 Sterol과 3종의 배당체 화합물의 단리·동정

이유건(Yu Geon Lee1),조정용(Jeong-Yong Cho),이현주(Hyun Joo Lee),이용현(Yong Hyun Lee),이상현(Sang-Hyun Lee),한태호(Tae-Ho Han),김월수(Wol-Soo Kim),박근형(Keun-Hyung Park),문제학(Jae-Hak Moon) 한국식품과학회 2013 한국식품과학회지 Vol.45 No.5

본 연구에서는 배의 유용성 증명을 위한 일환으로 배의 화학성분을 분자수준에서 밝히고자 하였다. 이에 배 과피 MeOH 추출물을 용매분획하여 얻은 EtOAc-산성 분획과 EtOAc-중성분획을 대상으로 Sephadex LH-20, silica gel, 그리고 ODS colmn chromatography와 HPLC를 이용하여 정제 및 단리하였다. 그 결과, EtOAc-산성 분획과 EtOAc-중성 분획으로부터 각각 2종씩의 화합물을 단리하였다. 단리된 화합물 1-4는 1H- 및 13C-NMR 분석을 통하여 각각 (S)-(+)-2-cis-abscisic acid O-β-D-glucopyranosyl ester (화합물 1), 1-[4-O-β-D-glucopyranosyl]phenyl ethanone(piceoside, 화합물 2), β-sitosterol (화합물 3), 그리고 β-sitosteryl 3-O-β-D-glucopyranoside (화합물 4)로 동정되었다. 단리된 3종의 배당체 화합물(화합물 1, 2, 4)들은 본 연구에 의해 배로부터 처음 동정되었으며, 화합물 3은 추황배로부터 처음 동정되었다. 본 연구결과가 배 함유 성분연구는 물론 배의 기능성 해명 연구에도 추후 중요한 기초자료로 활용되길 기대한다. We isolated and identified antioxidants from acidic and neutral ethyl acetate fractions of the peel of pear (Pyrus pyrifolia N. cv. Chuhwangbae). We isolated 4 compounds from the methanol extract, by using 3 different types of column chromatography (Sephadex LH-20, silica gel, and octadecylsilane) and preparative HPLC. We identified the isolated compounds as (S)-(+)-2-cis-abscisic acid O-β-D-glucopyranosyl ester (compound 1), 1-[4-O-β-D-glucopyranosyl]phenyl ethanone (picroside, compound 2), β-sitosterol (compound 3), and β-sitosteryl 3-O-β-D-glucopyranoside (compound 4) by nuclear magnetic resonance analysis. We are the first to report the identification of compounds 1, 2, and 4 from pear.

림프종 환자에서의 갈륨, TI-201 그리고 Tc-99m MIBI 섭취의 비교

천경아,조인호,원규장,이경희,이형우,현명수,이재태,이규보 영남대학교 의과대학 2002 Yeungnam University Journal of Medicine Vol.19 No.2

Purpose; Ga-67 scintigraphy has been used for the evaluation of tumors, especially lymphoma. Recently, Tl-201 and Tc-99m MIBI were also used to tumor imaging. Tl-201 and Tc-99m MIBI had better physiologic characteristics than Ga-67, so we studied 32 biopsy proven lymphoma patients (male 24, female 8, mean age 46 years) with Ga-67, Tl-201 or Tc-99m MIBI and compared the scan findings. Materials and Methods: Twenty-three of 32 patients were injected 74-111 MBq (2-3 mCi) of Tl-201, before chemotherapy and imaged with dual-headed SPECT (Prism 2000, Picker, USA) at 30 minutes after injection. Delayed images were obtained after 3 hr in 8 patients. Twenty seven of 32 patients were injected 740 MBq (20 mCi) of Tc-99m MIBI and imaged at 30 minutes after injection. 111-185 MBq (3-5 mCi) of Ga-67 was injected in 12 patients and imaged at 48 and 72 hours after injection. Twenty eight patients were diagnosed as non-Hodgkin's lymphoma and others were Hodgkin's lymphoma. Results: Twenty patients were positive on Tl-201 scan and 3 patients showed negative findings. One of these 3 patients, Tc-99m MIBI and Ga-67 scan were positive. Twenty two patients were positive on Tc-99m MIBI scan and 5 patients showed negative findings. One of these 5 patients, Tl-201 was positive and 2 were positive on Ga-67 scan. Ten of 12 patients showed positive findings on Ga-67 scan. The sensitivity of these agents were 83.3%, 87.0% and 81.5% for Ga-67, Tl-201 and Tc-99m MIBI, respectively. The sensitivity was highest in Tl-201 scan, but there were no significant differences among three tests. In this study, there was no significant difference of uptake ratios between early and delayed images of Tl-201. Conclusion: Scintigraphy with Tl-201 and Tc-99m MIBI in lymphoma patients have similar sensitivity with Ga-67.

Discordance in Spirometric Interpretations Based on Korean and Non-Korean Reference Equations

Nami Kim,Mi-Hee Park,Se-yeong Kim,Chunhui Suh,Sangyoon Lee,Kun-Hyung Kim,Chae-Kwan Lee,Dae-Hwan Kim,Jong-Tae Lee 대한직업환경의학회 2013 대한직업환경의학회지 Vol.25 No.-

Objectives: Korean regression models for spirometric reference values are different from those of other ethnic groups. The purpose of this study was to evaluate discordance in spirometric interpretations based on using Korean reference equations versus non-Korean reference equations. Methods: Spirometry was performed on 825 Korean male workers from April 2009 to November 2011. The spirometric patterns and disease severity were evaluated using two Korean equations (Choi’s and Lee’s) and three equations for Caucasians (NHANES III, Morris’s, and Knudson’s), and the results of Choi’s equation were compared with the non-Korean equations. The spirometric patterns were defined as normal, restrictive, and mild and moderate obstructive. Results: The mean differences in the FEV1% and FVC% between the two Korean equations were 2.0 ± 1.3% and 3.5 ± 2.2%, respectively. Morris’s equation had the greatest difference in the FEV1% from Choi’s equation: 32.9 ± 8.5%. Knudson’s equation had the greatest difference in the FVC% from Choi’s equation: 10.5 ± 6.5%. Conclusions: The two Korean equations shared similar characteristics of spirometric interpretation. The spirometric interpretations of Choi’s equation were significantly different from those of Morris’s equation and Knudson’s equation.

알루미늄 연속주조 용탕의 탈 가스 일체화 장치 개발

이용중,김태원,김기대,류재엽,이형우 한국공작기계학회 2004 한국공작기계학회 추계학술대회논문집 Vol.2004 No.-

It is necessary for managing a perfect process for degasing aluminum molten metal according to the increase of a grade of aluminum and its alloy products. There are some methods that have been used to manage a degasing process in recent years, such as an injection method that uses aluminum molten metal powder and chemicals supplier and input method that supplies argon and nitrogen, or chlorine gas by using a gas blow-tube. However, these methods show some problems, and it shows that it is a difficult process to handle, pollution due to the producing a lot of toxic gases like chlorine and fluoride gas, irregular effects, and lowering work efficiency due to the excessive processing time. The problems that are the most fatal are the producing a lot of sludge due to the reaction of aluminum molten metal with chemicals, loss of metals, and decreasing the life of refractory materials. In order to solve these problems, this paper develops a technology that is related to aluminum continuous casting molten metal and monolithic degasing apparatus. A degasing apparatus developed in this study improved the existing methods and prevented environmental pollution with smokeless, odorless, and harmlessness by using a new method that applies argon and nitrogen gas in which the methods used in the West and Japan are eliminated. The developed method can significantly reduce product faults that are caused by the production of gas and oxidation because it uses a preprocessed molten metal with chemicals. In addition, the amount of the produced sludge can also be reduced by 60~80% maximum compared with the existing methods. Then, it makes it possible to minimize the loss of metals. Moreover, the molten metal processing and settling time is also shortened by comparing it with the existing methods that are applied by using chemicals. In addition, it does much to improve the workers' health, safety and environment because there is no pollution. The improvement of productivity and prevention effects of disaster from the results of the development can be summarized as follows. It will contribute to the process rationalization because it does not have any unnecessary processes that the molten metal will be moved to an agitator by using a ladle and returned to process for degasing like the existing process due to the monolithic configuration. There are no floating impurities due to the oxidation caused by the contact with the air as same as the existing process. In addition, it can protect the blending of precipitation impurities. Because it has a monolithic configuration, it can avoid the use of additional energy to compensate the temperature decreasing about 60? that is caused by the moving of molten metal. It is not necessary to invest an extra facilities in order to discharge the gas generated from a degasing process by using an agitator. The working environment can be improved by the hospitable air in the factory because the molten metal is almost not exposed in the interior of the area.

부가적 산부식 시간에 따른 자가 산부식 접착제의 법랑질 전단결합강도

이형숙,김성기,이동수,김신,정태성 大韓小兒齒科學會 2009 大韓小兒齒科學會誌 Vol.36 No.4

이 연구의 목적은 유치와 영구치의 법랑질에 자가 산부식 접착제 적용 전 부가적인 산부식 시간을 달리 하였을 때, 전단결합강도에 미치는 영향을 알아보기 위함이다. 각각 65개의 발거된 건전한 유치와 영구치 협, 설면 법랑질 시편을 제작하고 두 종류의 자가 산부식 접착제를 적용하였다. 실험군은 Clearfil SE bond, Adper Prompt L-pop으로 처리한 두 개 군으로 나누고, 이를 다시 산부식 시간에 따라 여섯 군(0, 5, 10, 15, 20, 30초)으로 분류하였다. 대조군으로는 total-etching system인 Multi-purpose plus를 사용하였다. 접착제 처리면을 복합레진으로 충전하고 24시간 경과 후 전단결합강도를 측정하고 Mann-Whitney test와 Kruskal-Wallis test를 사용하여 통계분석 하였다. 결과는 자가 산부식 접착제를 적용한 군은 유치, 영구치 모두에서 total etching system에 비해 낮은 전단 결합강도를 보였다. 자가 산부식 접착제 사용 군내에서 산부식을 추가로 시행하였을 때 유치와 영구치 모두에서 결합강도가 증가하였으며, 10초 이상 산부식을 시행한 경우 결합력의 차이는 없는 것으로 나타났다. 유치와 영구치간 결합력의 차이는 인정되지 않았다. 결론적으로, 자가 산부식 접착제의 법랑질에 대한 전단결합강도는 유치, 영구치 모두에서 10초 이상의 부가적 산부식이 결합력의 증가에 유리하게 작용하는 것으로 나타났다. The aim of this study was to evaluate the bonding ability of two self etch systems to human primary and permanent enamel and the effect of additional acid etching time. Exfoliated, caries free human primary molar(n=65) and permanent molar extracted (n=65) were used. prepared enamel specimens were randomly divided into 2 test groups and a control group. The control group(n=10) were treated with 35% phosphoric acid gel and Scotchbond Multi-purpose adhesive. Experimental groups(self-etching systems) were subdivided into 6 groups(each n=10) according to additional etching time(0s, 5s, 10s, 15s, 20s, 30s). The result were as follows : 1) The shear bond strengths of the self-etching adhesives(Clearfil SE Bond, Adper Prompt L-pop) without additional etching were lower than control group(Scotch Bond Multipurpose). 2) Between the same self-etch adhesive groups, additional etched groups showed higher shear bond strength 3) There was no significant difference between primary and permanent enamel. In conclusion, bond strength of self-etch adhesives to enamel could be increased with additional etching.

정신분열병에서 사회인지의 개념과 신경생물학

이승환,정형태,이정희 大韓神經精神醫學會 2006 신경정신의학 Vol.45 No.3

Recently, social cognition is becoming a hot issue in field of schizophrenia research. There are increasing demands for more clear definition of terms and knowledge about neurobiology of social cognition in schizophrenia. One of the reasons why it receives so much attention would be its role of predicting the functional outcomes of schizophrenia patients. The purpose of this article is to review and summarize the concepts and neural correlates of social cognition in schizophrenia. Functional brain imaging studies as well as behavioral studies were reviewed.

공기청정기의 일부 실내공기 오염물질 제거효율에 관한 연구

이태형,김윤신,홍승철,이철민,김종철,전형진,김중호 한국환경과학회 2005 한국환경과학회지 Vol.14 No.5

In this study, we investigated PM_(10), NO₂, and 1-hydroxypyrene(1-OHP) in urine at indoor environments which are 35 houses and 20 hospitals for using air cleaner and non-using air cleaner in Seoul metropolitan area and Kyoung-gi province from April, 2003 to February, 2004. Moreover, we examined effect of improvement for indoor air quality and health effect by concentration of 1-OHP also we investigated removal efficiency by air cleaner for PM_(10), NO₂, and 1-OHP that were 28.5%, 27.4%, and 42.1% respectively. Concentration of PM_(10), NO₂, and 1-OHP were 19.02±18.14μg/m³, 8.66±3.06ppb, and 0.19±0.18μg/g creatinine when air cleaner was no worked. The concentration for PM_(10), NO₂ and 1-OHP were 13.60+10.79μg/m³, 6.29±2.71ppb, and 0.11±0.10μg/g creatinine, respectively. It was significant statistically. Therefore, it is considered using the air cleaner to remove the partial pollutants in indoor environment and is positive effect for health.

다중이용시설내 공기중 바이오에오로졸 농도분포 특성에 관한 연구

이철민,김윤신,이태형,박원석,홍승철 한국환경과학회 2004 한국환경과학회지 Vol.13 No.3

This study was conducted to evaluate the characterization of airborne bioaerosol in public facilities in Seoul. A total of 17 public facilities were investigated from December, 2002 to February, 2003. As results of the survey, the mean concentrations of bacteria and fungi in indoor air of public facilities were 378.08±296.33 CFU/m³ by RCS and 106.38±171.63 CFU/m³ and 347.46 ± 335.32 CFU/m³ and 95.23±62.61 CFU/m³, by Six-stage cascade air sampler respectively. The mean concentrations of bacteria in indoor air (by ventilation method) were 517.14± 343.93 CFU/m³ of natural ventilation and 215,83±100.71 CFU/m³ of mechanical ventilation. The mean concentrations of fungi in indoor air (by ventilation method) were 83.14±79.16 CFU/m³ of natural ventilation and 133.50±248.07 CFU/m³ of mechanical ventilation. The mean concentrations of bacteria in indoor air were 449.44 CFU/m³ for the ground and 217.50±103.68 CFU/m³ for the underground. The mean concentrations of fungi in indoor air were 63.89±77.66 CFU/m³ for the ground and 202.00±290.08 CFU/m³ for the underground.

A2024와 SM45C 마찰용접의 열전달 해석

이상윤,고준빈,명태식,김기길,강형모 大田産業大學校 2001 한밭대학교 논문집 Vol.18 No.-

The heat transfer mechanism initiating the friction welding is examined and a transient three dimensional heat conduction model for the welding of two dissimilar cylindrical metal bars is investigated. The cylindrical metal bars are made of materials made of A2024 and SM45C. Numerical simulations of heat flow are performed using the finite volume method. Respectively, Commercial FLUENT code is used in the heat flow simulation and maximum temperature and distribution of temperature are calculated. Temperature of friction welded joining face is compared with the temperature distribution measured by experiment and numerical simulation. The maximum temperature of friction welded joining face is lower than melting point of A2024-T6 aluminum alloy using insert metal. The temperature distribution of friction welded joining face with insert metal is more uniform than that of without insert metal