정준상관 행렬도와 군집분석을 응용한 KLPGA 선수의 기술과 경기성적요인에 대한 연관성 분석

최태훈,최용석,Choi, Tae-Hoon,Choi, Yong-Seok 한국통계학회 2008 응용통계연구 Vol.21 No.3

정준상관 행렬도(canonical correlation biplot)는 정준상관분석에서 두 변수 집단에 의해서 측정된 다변량 자료에서 변수 집단 간의 관계와 개체들의 관계를 탐색하기 위한 2차원 그림이다. 이는 일반적으로 최용석 (2006, 1장)의 한 변수 집단에 의한 행렬자료에 대한 일반적인 행렬도를 두 변수 집단에 의한 행렬자료로 확장한 것으로 볼 수 있다. 최근에 Choi와 Kim (2008)은 개체들이 많은 대용량 자료에서 행렬도의 해석상 힘든 문제점을 지적하고 이를 극복하는 데 군집분석을 활용하는 방법을 제시하고 있다. 일반적인 행렬도에서 발생하는 대용량 자료에 대한문제는 정준상관 행렬도에서도 동일하게 발생하곤 한다. 본 연구에서는 2006년도 KLPGA 선수 중 상금 순위 상위 50명을 대상으로 정준상관 행렬도를 통해 기술요인변수군(평균 퍼팅수. 그린 적중율, 파 세이브율, 파 브레이크율)과 경기성적요인변수군(상금, 평균 타수)간의 관련성을 살펴보고 군집분석을 활용하여 각 선수들의 군집을 시도하려한다. Canonical correlation biplot is 2-dimensional plot for investigating the relationship between two sets of variables and the relationship between observations and variables in canonical correlation analysis graphically. In general, biplot is useful for giving a graphical description of the data. However, this general biplot and also canonical correlation biplot do not give some concise interpretations between variables and observations when the number of observations are large. Recently, for overcoming this problem, Choi and Kim (2008) suggested a method to interpret the biplot analysis by applying the K-means clustering analysis. Therefore, in this study, we will apply their method for investigating the relationship between skill and competition score factors of KLPGA players using canonical correlation biplot and cluster analysis.

능동 클램프 ZVS 플라이백 컨버터의 역률개선에 관한 연구

최태영,류동균,이우석,안정준,원충연,김수석 성균관대학교 2002 학술회의지원논문목록집 Vol.2002 No.-

본 논문에서는 single-stage, two-stage 두가지 역률보상(PFC)기법을 기존의 능동 클램프 플라이백 컨버터에 적용하여 역률 개선을 하였다. 삽입된 플라이백 컨버터의 능동클램프회로가 주스위치와 보조스위치의 영전압스위칭(ZVS)을 구현하며, 스위칭 손실을 줄임으로써 고효율을 얻을 수 있고, 높은 주파수에서의 스위칭이 가능하다. 하지만 일반적으로 사용되는 다이오드정류기, 평활용커패시터에 의한 낮은 역률의 문제점이 남아있다. 본 논문에서는 300W급 능동 클램프ZVS플라이백 컨버터를 설계하여 single-stage, two-stage방식을 적용, 입력역률개선을 시뮬레이션과 실험에 의해 입증하고자 한다. This paper analyzed PFC of active clamp ZVS flyback converter by adding two method PFC (Power Factor Correction) circuit - two-stage and single-stage. The addition of active clamp circuit also provide a mechanism for achieving ZVS of both the primary and auxiliary switches. ZVS also limits the turn off di/dt of the output rectifier, reducing rectifier switching loss and switching noise, due to diode reverse recovery. As a results, the proposed converters have characteristics of the reduced switching noise and high efficiency in comparison to conventional flyback converter. The simulation and experimental results show that the proposed converters improve the input PF of 300W ZVS flyback converter by adding single-stage, two-stage PFC circuit.

뇌 심혈관계 관련질환 유소견 근로자들의 의료이용에 관한 연구

최태성,유재영,김진석,장은철,박주언,우극현 순천향의학연구소 2006 Journal of Soonchunhyang Medical Science Vol.12 No.2

..

스테레오정합을 이용한 물체의 3D 모델링과 깊이정보 추출에 관한 연구

최종갑,김태효,박영석 慶南大學校 附設 工業技術硏究所 2002 硏究論文集 Vol.20 No.-

본 논문에서는 스테레오 카메라로 입력된 영상을 3차원 모델링과 깊이정보 추출과 계측알고리즘을 제안하였다. 본 알고리즘은 스테레오 카메라에서 얻어진 2개의 영상으로부터 에지검출을 하고, 특이점들을 추출한다, 이로부터 좌·우 영상간의 대응점을 찾아서 정합시킨다. 영상정합시에 발생되는 폐색영역(occlusion region), 윤곽선잡음(boundary noise) 및 모호성(ambiguity)과 같은 오차성분을 제안한 알고리즘으로 오차를 줄일 수 있다. 실험 결과, 물체의 3차원 정합은 안정적인 정합을 보였으나 정밀한 부분은 1.97%이상의 오차가 발생하였고 전체구간에 대해서는 평균 1.308% 오차가 발생하였다. 이는 입력된 영상들에 대한 폐색, 잡음과 같은 오류성분으로 판단된다. 개선 방법으로 더 많은 각도에서 획득한 영상을 이용함으로써 해결할 수 있으리라 판단된다. In this paper, it is intended to be measured by extracting depth data and three-dimensional modeling of objects about images acquired from stereo cameras. In this algorithm, the edge detection is performed from the two images obtained by stereo cameras, then the features in the two images are extracted. The corresponding points are searched and matched from the left and right images. The proposed algorithm can be reduced the error components such as occluded region, boundary noise and ambiguity of the image feature points occurring when the two images are matched each other. In experimental results, 3D matching was stabilized. But, the errors occurred on detail parts by more than 1.97% and entire domain by 1.308% on the average. It determined to be occluded region, noises from camera images. It will be improved as many as images obtained from various angles.

原木 표고 栽培 收益性 調査

崔泰鎬,閔斗植,趙南奭,趙修玉 충북대학교 농업과학기술연구소 1993 農業科學硏究 Vol.11 No.1

For the investigation of the economics of mushroom(Lentinus erodes) cultivation in the oak bed- log, the items of production costs were examined. The results are as follows ; 1. Among the items of cultivation costs in the first year, the material bed-log cost(62.4% ) was the highest, then the labor cost was. 2. The labor costs for management(27.6-28.1%), bed-log handling(26.8-27.9% ) and mushroom harvesting(26.2-27.9%) were higher than the others from the 2nd year to the sixth year. 3. The gross income and the cultivation cost per one bed- log were 15,672 won and 3,170 won for six years. 4. For six years, the total net income was 12,500 won and the annual income was 2,080 won per one bed- log.

지문정보를 이용한 안전한 암호키 저장 시스템 개발

최은화,서창호,임종태,김석우 公州大學校 工學硏究院 生産技術硏究所 2003 論文集 Vol.11 No.-

Biometric encryption refers to a process of secure key management. Biometric encryption does not directly provide a mechanism for the encryption/decryption of data, but rather provides a replacement to typical passcode key-protection protocols. Although the process of biometric encryption can be applied to any biometric image, the initial implementation was achieved using fingerprint images.

프레스 금형의 특징형상 인식에 의한 가공데이타 자동변환

최홍태,반갑수,이석희 한국경영과학회 1994 한국경영과학회 학술대회논문집 Vol.- No.1

This paper presents an automatic conversion of machining data from the orthographic views of press mold by feature recognition rule. The system includes following 6 modules : separation of views, function support, dimension text check and feature processing modules. The characteristic of this system is that with minimum user intervention, it recognizes basic features such as holes, slots, pockets and clamping parts and thus automatically converts CAD drawing details of press mold into machining data using 2D CAD system instead of using an expensive 3D Modeler. The system is developed by using IBM-PC in the environment of AutoCAD R12, AutoLISP and MetaWare High C. Performance of the system is verified as a good interfacing of CAD and CAM when applied to a lot of sample drawing.

한의진단명과 진단요건의 표준화 연구 III : 3차년도 연구결과 보고

최선미,양기상,최승훈,박경모,박종현,심범상,김성우,노석선,이인선,정진홍,이진용,김달래,임형호,김윤범,박성식,송태원,김종우,이승기,최윤정,신순식 한국한의학연구원 1997 한국한의학연구원논문집 Vol.3 No.1

The diagnostic requirements were suggested and explained regarding the systems of differentiation of symptoms and signs in the third year study of standardization and unification of the terms and conditions used for diagnosis in oriental medicine. The systems were as follows : - analyzing and differentiating of epidemic febrile disease - analyzing and differentiating in accordance with the Sasang constitution medicine based on four-type recognition - differentiation of disease according to pathological changes of Chong and Ren channels - standards for diagnosis of women's disease - standards for diagnosis of children's disease - standards for diagnosis of motor and sensor disturbance (-muscle. born, joint, etc.) - standards for diagnosis of neuropsychiatric disease - standards for diagnosis of five sense organ disease - standards for diagnosis of external disease The indivisual diagnosis pattern was arranged by the diagnostic requirements in the following order : another name, notion of diagnosis pattern, index of differentiation of symptoms and signs, the main point of diagnosis, analysis of diagnosis pattern, discrimination of diagnosis pattern, prognosis, a way of curing a disease, prescription, herbs in common use, disease appearing the diagnosis pattern, documents. The standards for diagnosis of each disease was arranged by the diagnostic requirements in the following order : another name, notion of disease, the main point of diagnosis, analyzing and differentiating of disease, analysis of disease, discrimination of disease, prognosis, a way of curing and prescription of disease, disease in western medicine appearing the disease in oriental medicine, documents.

가상기준점측량을 이용한 도시기준점 분석

최석근, 안원태, 박명진 충북대학교 건설기술연구소 2008 충북대학교 건설기술연구소 논문집 Vol.27 No.1

Realtime Kinematic(RTK) method make decision to correct position by calculating correction value of rover and transmitting to rover data from GPS base station. However. this method has many problems as it required base station and rover. Also lots of time for setting, commit workers and many equipment were needed. Therefore, in this study, we made system using virtual reference station and analysed the accuracy of urban control point through VRS RTK method without limited time and distance. As result of this study, two control points were obtained with good results in expected accuracy, therefore it was good method for management of urban control point. Also, it was useful to reconstruct control point immediately and to build urban information system.

도심지 터널형 방음벽의 환경적 요인 및 외관 디자인에 관한 연구

최정민,윤태호,박창섭,이경희,박진석 국립7개대학공동논문집간행위원회 2005 공업기술연구 Vol.5 No.-

This study is to obtain a basic data for a better environment and visual design improvement for the sound barrier tunnel located along the overpasses which passed through downtown areas. For this purpose, the traffic noise was measured in Daegu. In addition. using the sound analysis software, equivalent sounds were checked and analyzed. Finally, the alternatives of sound barrier tunnel were proposed.