프리캐스트 포스트텐션 콘크리트 넓은 보-기둥 내부 접합부의 비탄성 거동

황재환,최윤철,김영찬,김대중,임재형,권기혁,문정호,이리형 대한건축학회 2003 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.23 No.2(구조계)

The purpose of this paper is to evaluate the response of Precast Prestressed Concrete Interior Wide Beam-Column Joint subjected to cyclic lateral loading. To this end, the experimental investigation was performed with six half-scale specimens of interior connection. The design parameters are the beam to column depth ratio, and the number of tendons within column core. One of the specimens, IJH-6, is modeled for the connection at the top floor of a structure. The test results showed that the specimens sufficiently resist up to limiting drift ratio of 0.035 in accordance with the provisional standard by ACI of acceptance criteria for concrete special moment frames.

치과용 디지털 색상 분석용 기기의 정확성과 재현 능력에 대한 평가

정중재,박수정,조현구,황윤찬,오원만,황인남 大韓齒科保存學會 2008 Restorative Dentistry & Endodontics Vol.33 No.4

본 연구에서는 치과용 디지털 색상 분석기기 중 하나인 ShadeScan (CYNOVAD, Montreal, Canada)의 색상 분석의 정확성과 재현 능력을 평가하였다. 균일한 치아 배열을 가진 20대 성인 남자 8명과 여자 8명의 상악 인상을 고무인 상제 (Exaflex, GC, Japan)를 이용하여 채득하고, 인상에 A2 색상의 임시 크라운 제작용 자가중합형 레진을 주입하여 치아 모델을 완성하고, ShadeScan을 이용해 각 치아의 영상을 얻어 컴퓨터의 ShadeScan 프로그램으로 분석하였다. 그리고 측정 결과의 재현 능력를 평가하기 위해 2개의 치아 모델을 임의로 선택하여 각 치아마다 10회의 색상 측정을 시행하여 분석 결과를 비교하였다. 또한 분석된 영상의 동일 shade 간의 색차를 확인하기 위해 광중합 복합레진인 Gradia Direct (GC, Tokyo, Japan)와 shade guide의 CIE L^(*)a^(*)b^(*) 값을 백색과 흑색 배경판 상에서 spectrophotometer (Spectrolino, GretagMacbeth, USA)로 측정하고, ShadeScan에 의해 동일한 shade로 분석된 shade guide간의 색차를 계산하여 다음의 결과를 얻었다. 모든 치아에서 모델 제작 재료와 동일한 A2 색상므로 분석된 경우는 없었으며, 개개의 치아에서 전체 순면이 동일한 색상으로 분석된 예는 없었다. 또한 동일한 치아군에서 치아의 크기 , 형태 , 순면의 굴곡 등에 따라 서로 다른 색상 분포를 보였다. 재현성 평가에서 각 치아의 중앙부는 비교적 일정한 재현성출 보였으나, 절단부와 주변 부위는 재현성이 낮았으며, 동일한 shade로 분석된 shade guide 간에는 3 이상의 색차 (ΔE^(*))를 보였다. 이상의 결과는 치과용 디지털 색상 분석기기는 비록 높은 재현 능력은 가지고 있지만 정확성에 오류가 있음을 시사하며 , 따라서 이러한 기기를 이용한 색상 분석 시 좀 더 세밀한 주의와 다른 방법의 추가 사용이 필요하리라 사료된다. This study was done to evaluate the reliability of the digital color analysis system (ShadeScan, CYNOVAD, Montreal, Canada) for dentistry. Sixteen tooth models were made by injecting the A2 shade chemical cured resin for temporary crown into the impression acquired from 16 adults. Surfaces of the model teeth were polished with resin polishing cloth. The window of the ShadeScan handpiece was placed on the labial surface of tooth and tooth images were captured, and each tooth shade was analyzed with the ShadeScan software. Captured images were selected in groups, and compared one another. Two models were selected to evaluate repeatability of ShadeScan, and shade analysis was performed 10 times for each tooth. And, to ascertain the color difference of same shade code analyzed by ShadeScan, CIE L^(*)a^(*)b^(*)values of shade guide of Gradia Direct (GC, Tokyo, Japan) were measured on the white and black background using the Spectrolino (GretagMacbeth, USA), and Shade map of each shade guide was captured using the ShadeScan. There were no teeth that were analyzed as A2 shade and unique shade. And shade mapping analyses of the same tooth revealed similar shade and distribution except incisal third. Color difference (ΔE^(*)) among the Shade map which analyzed as same shade by ShadeScan were above 3. Within the limits of this study, digital color analysis instrument for dentistry has relatively high repeatability, but has controversial in accuracy.

복합레진의 조건등색에 관한 연구 : D_(65), A, C, FCW and TL84

박기정,황윤찬,김선호,오원만,황인남 전남대학교 치의학연구소 2003 구강과학 Vol.15 No.2

There were problems in selecting exact colors of composite resins currently used in clinic by examining with naked eyes. This study was done to present a criterion in selection of the most proper light sources and materials by measuring metamerism index of the light curing composite resins with spectrocolorimeter. Metamerism is present when two objects appear to be the same color in one illuminant but different in another. This is due to the fact that they have different spectral curves that fail to match under the second illuminant. In this study, five light polymerized composite resins; Esthet-X, Filteck Z250, Filteck A110, Charisma, Vitalescence which are currently used in clinic were chosen based on Vita shade. Five samples were made for shade of each product with Teflon mold(diameter: 15mm, thickness: 2mm). Compressed resins with glass slab were light polymerized with a visible light curing unit(Optilux 500, 13mm tip diameter, Demetron, USA) for 60 seconds. Polymerized samples were removed and those were grinded to 2.0mm in thickness with sand papers(#600 & #1000). Samples were carefully prepared without fingerprints and impurities in grinding procedure and kept in distilled water for a week at room temperature. Metamerism index of each samples on a Barium sulfate plate(L^(*)=96.54, a^(*)=0.19, b^(*)=0.01) prepared for sample fixation were measured with spectrocolorimeter(Miniscan XE plus. Model 4000s. Hunter Lab, USA) by applying standard light source D65, C, Fcw, TL84' and A. Standardization was done with Reference standard(X=80.8, Y=85.7, Z=90.8) and Light trap. Samples were kept in distilled water at room temperature in all procedures. The results are as follows. 1. Different resins using same Vita shade showed recognizable color difference(ΔE^(*)>2). 2. All composites had Ml below accepted value 0.5 between standard illuminant(D65, C, & A) and below 1.5 under fluorescent condition (Fcw & TL84). 3. Ml value between D65 and A showed higher value than Ml value between other source of light(p<0.01). 4. All resins except Z25O showed Ml value that A3 is higher than Al between D65 and A(p<0.05).

흰쥐에서의 카르복시메칠셀룰로오스나트륨과 겔란검 혼합겔의 유착방지 효과

권윤환,이시범,이정권,박용덕,박정숙,황성주 한국약제학회 2004 Journal of Pharmaceutical Investigation Vol.34 No.6

The aim of the present study was to investigate the efficacy of a mixed gel formulation composed of sodium carboxymethyl cellulose and gellan gum (Na-CMC gel) for the prevention of adhesions after laminectomv. The anti-adhesive effect of the Na-CMC gel was tested in a controlled randomized study using an animal model of lumbar laminectomv. The animals (60 female Sprague-Dawlev rats) were randomly allocated into two treatment groups to receive the Na-CMC gel on the injured area or no gel (control). The incidence of adhesions and their grade were blindly evaluated at 4. 8 and 12 weeks after surgery. The amount of scar tissue and tenacity were grossly reduced by the Na-CMC gel at postoperative 4. 8. and 12 weeks. The mean adhesion scores were 0.75. 125. and 1.38 at 4. 8. and 12 weeks in the gel-treated group. respectively. No significant inflammatory reaction was observed and the healing of wound was not affected by the Na-CMC gel. The Na-CMC gel reduced the amount of scar formation and tenacity in rat laminectomv model without affecting the healing of operation wound and other complications. Therefore. the Na-CMC gel may be the potential to prevent postsurgical adhesions in clinical state.

복합레진의 표면거칠기에 따른 투명도와 표면 색상의 차이에 관한 연구

조규정,박수정,조현구,김동준,황윤찬,오원만,황인남 大韓齒科保存學會 2006 Restorative Dentistry & Endodontics Vol.31 No.4

본 연구는 복합레진의 표면 연마에 의한 표면 거칠기가 표면 색상과 투명도에 어떤 영향을 미치는가를 알아보고자 시행하였다. Charisma (Heraeus Kulzer GmbH, Domagen, Germany)의 B1과 A3, Esthet-X (DENTSPLY Caulk, Milford, USA)의 B1과 B3 레진으로 거칠기에 따른 표면 색상을 평가하기 위한 직경 8㎜, 두께 5㎜의 시편을 제작하고, Sof-Lex finishing & polishing system(3M, ESPE Dental Products. St. Paul USA)의 C, M, F, 및 SF 디스크로 시편의 한쪽 면을 연마하였으며, 연마 전 Mylar strip으로 압축된 면을 대조군으로 하였다. 거칠기에 따른 투명도의 차이를 평가하기 위한 두께 1 ㎜의 시편을 Charisma의 A3로 제작하여, 한쪽 면을 600, 1000, 1500 및 2000번 사포로 연마하였다. 각 시편의 연마 전과 후, 연마면의 CIE L^(*)a^(*)b^(*)값과 1 ㎜ 시편의 백색과 흑색 배경판 상에서의 Y값을 spectrophotometer인 Spectrolino (GretagMacbech, Regensdorf, Switzerland)를 사용해 측정 분석하였으며, 각 시편의 연마 전과 후의 평균 표면 조드 (Ra)값을 Surface Roughness Tester SJ-301 (Mytutoyo, Tokyo, Japan)로 측정했다. L^(*)값은 재료와 색상에 상관없이 가장 거친 Sof-lex C 디스크로 연마한 군에서 가장 높은 값을 보였으며 (p < 0.05). Esthet-X B3군을 제외한 모든 군에서 Ra값이 감소함에 따라 L^(*)값도 낮아졌다. a^(*)값은 표면 거칠기에 따라 특정한 변화 양상을 보이지 않았으며, b^(*)값은 Esthet-X B1군을 제외한 모든 군에서 Sof-lex SF 디스크로 연마 시 가장 높은 값을 보였으며 (p < 0.05), Charisma B1과 Esthet-X B3군에서 Ra값과 비교적 높은 상관 관계를 보였다. Contrast ratio는 1000번과 1500번 사포로 연마한 군간을 제외한 모든 군 간에 유의한 차이를 보여으며 (p < 0.05). 표면 거칠기가 감소함에 따라 contrast ratio도 감소하였다(R2 = 0.801). The objectives of this were to evaluate the effect of surface roughness on the surface color and translucency of the composite reins. Two composite resins (Esthet-X, Dentsply, Milford, USA and Charisma, Kulzer, Domagen, Germany) were used to investigate the surface color. Charisma was used to investigate the translucency. 40 disc samples (diameter: 8 ㎜, thickness: 5 ㎜) were made by each product to measure the surface color. Ploymerized each sample's one side was treated by Sof-Lex finishing and polishing system (Group C, M, F, SF). 40 disc samples (diameter: 6 ㎜, thickness: 1 ㎜) were prepared to measure the opacity. 1 ㎜ samples were ground one side with #600, #1000, #1500 and #2000 sandpapers. CIE L^(*)a^(*)b^(*) values of each 5 ㎜ thickness samples, and XYZ values of 1 ㎜ thickness samples on the white and black background were measured with spectrophotometer (Spectrolino, GretagMacbeth, Regensdorf, Switzerland). Mean surface roughness (Ra) of all samples before and after surface treatment was measured using the Surface Roughness Tester SJ-301 (Mytutoyo, Tokyo, Japan). Regardless of type and shade of the composite resin, L^(*) values measured in group C were higher than others (p < 0.05), and L^(*) value decreased as the Ra value decreased except B3 shade of Esthet-X. But there were no significant difference in a^(*) values among groups. In control group and SF, highest b^(*) values were measured (p < 0.05), except B1 shade of Esthet-X. Contrast ratio decreased as the Ra value decreased (p < 0.05). With the above results, difference of surface roughness has influence on surface color and translucency of dental composite resins. 〔J Kor Acad Cons Dent 31(4):312-322, 2006〕

치과용 심미 수복 재료들의 색상 연구를 통한 새로운 치과용 색체계의 제안

오윤정,박수정,김동준,조현구,황윤찬,오원만,황인남 대한치과보존학회 2007 Restorative Dentistry & Endodontics Vol.32 No.1

본 연구는 새로운 치과용 색체계 개발을 목적으로 현재 치과에서 사용되고 있는 Vita shade를 사용하는 9 제조사의 12종의 광중합형 복합레진과 1종의 치과용 도재의 색상을 diffuse/8° 수광 방식을 사용하는 분광색체계 (MiniScan XE plus, Model 4000S, Hunter Lab, USA)를 이용해 D65 표준광과 10도 관찰자 시야 하에서 CIE L^(*)a^(*)b^(*) 값을 측정하고 색상 범위를 분석하였다. 분석한 정보를 color sorting system을 응용한 CNU Cons Dental Color Chart의 색상 표현 방식인 T###에 치과용 수복 재료들의 범위를 적용하여 다음의 결과를 얻었다. 측정된 L^(*)a^(*)b^(*)값의 분포를 분석해 보면 L^(*)값은 80.40과 52.70 사이에, a^(*)값은 10.60과-3.60 사이에, 그리고 b^(*)값은 28.40과 2.21 사이에 분포한다. L^(*)값의 평균값은 67.40, 중앙값은 67.30이며, a^(*)값은 2.89와 2.91, b^(*)값은 14.30 과 13.90 이다. 이러한 분석을 토대로 CNU Cons Dental Color Chart의 T###의 첫 번째 숫자에 해당하는 L^(*)값의 각 숫자간의 차이는 2.0으로, 그리고 2번째 숫자인 a^(*)값의 각 숫자간의 차이는 1, 그리고 세 번째 숫자인 b^(*)값의 각 숫자간의 차이는 2로 정하였다. T555에 해당하는 L^(*)값의 범위는 66.0이상, 68.0미만으로, a^(*)값의 범위는 3이상 4미만으로, b^(*)값의 범위는 14이상 16미만으로 결정하였다. The purpose of this study is to develope new dental color-space system. Twelve kinds of dental composites and one kind of dental porcelain were used in this study. Disk samples (15 ㎜ in diameter, 4 ㎜ in thickness) of used materials were made and sample’s CIE L^(*)a^(*)b^(*) value was measured by Spectrocolorimeter (MiniScan XE plus, Model 4000S, diffuse/8° viewing mode, 14.3 ㎜ Port diameters, Hunter Lab. USA). The range of measured color distribution was analyzed. All the data were applied in the form of T### which is expression unit in CNU Cons Dental Color Chart. The value of L^(*) lies between 80.40 and 52.70. The value of a^(*) are between 10.60 and 3.60 and b^(*) are between 28.40 and 2.21. The average value of L^(*) is 67.40, and median value is 67.30. The value of a^(*) are 2.89 and 2.91 respectively. And for the b^(*), 14.30 and 13.90 were obtained. The data were converted to T### that is the unit count system in CNU-Cons Dental Color Chart. The value of L^(*) is converted in the first digit of the numbering system. Each unit is 2.0 measured values. The second digit is the value of a^(*) and is converted new number by 1.0 measured value. For the third digit b^(*) is replaced and it is 2.0 measured unit apart. T555 was set to the value of L^(*) ranging from 66.0 to 68.0, value of a^(*) ranging from 3 to 4 and b^(*) value ranging from 14 to 16.

중합광원과 레진 색상이 복합레진의 중합깊이에 미치는 영향

나준석,정선와,황윤찬,김선호,윤창,오원만,황인남 大韓齒科保存學會 2002 Restorative Dentistry & Endodontics Vol.27 No.6

Purpose of this research is estimating polymerization depth of different source of light. XL 3000 for halogen light, Apollo 95E for plasma arc light and Easy cure for LED light source were used in this study. Different shade (B1 & A3) resin composites (Esthet-X, Dentsply, U.S.A.) were used to measure depth of cure. 1, 2, and 3 mm thick samples were light cured for three seconds, six seconds or 10 seconds with Apollo 95E and they were light cured with XL-3000 and Easy cure for 10 seconds, 20 seconds, or 40 seconds. Vicker's hardness test carried out after store samples for 24 hours in distilled water. Results were as following. 1. Curing time increases from all source of lights. curing depth increased(p<0.05). 2. Depth (that except 1mm group and 2mm group which lighten to halogen source of light) deepens in all groups, Vicker's hardness decreased(p<0.05). 3. Vicker's hardness of A3 shade composite was lower in all depths more than B1 shade composites in group that do polymerization for 10 seconds and 20 seconds using halogen source of light(p<0.05), but group that do polymerization for 40 seconds did not show difference(p>0.05). 4. Groups that do polymerization using Plasma arc and LED source of light did not show Vicker's hardness difference according to color at surface and 1mm depth(p>0.05), but showed difference according to color at 2mm and 3mm depth(p<0.05). The results showed that Apollo 95E need more polymerization times than manufacturer's recommendation (3 seconds), and Easy cure need polymerization time of XL-3000 at least.

골 및 연부조직 감염증에 대한 Ceftriaxone의 치료 효과

박영식,황병연,임신호,김정식 최신의학사 1986 最新醫學 Vol.29 No.10

복합레진의 조건등색에 관한 연구

박기정,황윤찬,김선호,오원만,황인남 大韓齒科保存學會 2003 Restorative Dentistry & Endodontics Vol.28 No.5

This study was done to present a criterion in selection of the most proper light sources and materials by measuring metamerism index(MI) of the light curing composite resins with spectrocolorimeter. Metamerism is defined when two objects appear to be the same color in one illuminant but different in another. This is due to the fact that they have different spectral curves that fail to match under the second illuminant. In this study, A1 & A3 shade of five light curing composite resins (Esthet-X, Filteck Z250, Filteck A110. Charisma. Vitalescence) were chosen based on Vita shade. Five samples were made for shade of each product with Teflon mold (diameter: 15mm, thickness: 2mm). Metamerism index of each samples on a Barium sulfate plate(L^(*)=96.54, a^(*)=0.19, b^(*)=0.01) prepared for sample fixation were measured with spectrocolorimeter(Miniscan XE plus. Model 4000s. Hunter Lab. USA) by applying standard light source D_(65), C. Fcw, TL84 and A. Standardization was done with reference standard(X=80.8, Y=85.7, Z=90.8) and light trap. The results were as follows. 1. Different resins with same Vita shade showed recognizable color difference (ΔE^(*)>2). 2. All composites had MI below accepted value 0.5 between standard illuminant(D_(65), C, & A) and below 1.5 under fluorescent condition (Fcw & TL84). 3. MI value between D_(65) and A showed higher value than MI value between other source of light(p<0.01). 4. All resins except Z250 showed MI value that A3 is higher than A1 between D_(65) and A(p<0.05).

Continuous Wave of Condensation Technique으로 근관충전시 치근면 온도상승 분석

김영주,황윤찬,김선호,황인남,최보영,정영진,정우남,오원만 전남대학교 치의학연구소 2003 구강과학 Vol.15 No.4

This study was conducted to evaluate safety to the supporting tissues of the root while the root canal is obturated using continuous wave of condensation technique. A extracted maxillary central incisor was prepared for repeated canal obturation. After conventional access opening, working length was then established to the point 1㎜ from anatomical root apex. The root canal was prepared with GT rotary Ni-Ti file (Dentsply Maillefer, Switzerland). Five thermocouples (Onega Engineering Inc., USA) were placed at 2㎜ increments on one side beginning 1㎜ from the anatomical root apex and the other five thermocouples at 2㎜ increments on the other side beginning 2㎜ from it. For obturation, a nonstandardized medium size gutta-percha cone and a ML Buchanan plugger (Analytic technologies, USA) were selected. After drying of root canal, AH 26 root canal sealer (Dentsply Detrey, Germany) was applied on the wall of the root canal. Baseline temperature was measured on the root surface. The ML size plugger was preheated for 2seconds and then the real temperature of it was recorded before insertion into the root canal. The root canal was obturated with continuous wave of condensation technique as described by Buchanan. The root surface temperature was recorded during obturation and it was performed ten times at each of the following temperature settings: 150℃, 200℃, 250℃ and 300℃. After completion of the temperature recording, the dentinal-cementum thickness at each sites where thermocouples were attached was measured. The data were analyzed using one-way ANOVA followed by Scheffe's test and linear regression test. The results were as follows. 1. When the temperature was set at 150℃, 200℃, 250℃ and 300℃ on the digital display of System B HeatSource, the real temperature of the plugger at the 1㎜ point from the tip revealed 130.82±2.96℃, 158.00±5.26℃, 215.92±6.91℃ and 249.88±3.65℃ respectively. 2. The position of 8 ㎜ from the anatomical apex showed the highest temperature increase at each temperature settings and it was significantly higher than those of other positions (p<0.01). The temperature rise was constantly increased toward coronal portion from apex of the root. 3. The maximum temperature increase on the root surface was 2.37±0.09℃ at 150℃ setting, 3.11±0.12℃ at 200℃ setting, 3.93± 0.09℃ at 250℃ setting and 5.69± 0.15℃ at 300℃ setting. These results suggest that it be relatively kind to the supporting tissues of the root that the root canal is obturated using continuous wave of condensation technique at 150℃, 200℃, 250℃ and 300℃ temperature settings on digital display of System B HeatSource.