메탄/공기 층류 부분예혼합화염의 상세 라디칼(OH*, CH* 그리고 C₂*) 정보와 배기매출물에 관한 실험적 연구

정용기,오정석,전충환,장영준,Jeong Yong Ki,Oh Jeong Seog,Jeon Chung Hwan,Chang Young June 대한기계학회 2005 大韓機械學會論文集B Vol.29 No.2

An experimental study was performed to investigate the effects of partially premixing, varying the equivalence ratios from $0.79{\sim}{\infty}$, on NOx emissions and chemiluminescence of excited $OH^{\ast},\;CH^{ast}\;C_2^{\ast}$ radicals in laminar partially premixed flames. the signal from the electronically excited state of $OH^{\ast},\;CH^{ast}\;C_2^{\ast}$ was detected through a band pass filter with a photo multiplier tube, which are processed to the intensity ratio ($C_2^{\ast}/CH^{\ast},\;C_2^{\ast}/OH^{\ast},\;and\;CH^{\ast}/OH^{\ast}$) to reveal the correlation with local equivalence ratio. And measurements of NOx emission were made to investigate the relationship between visible flame appearance, chemiluminescence, and EINOX. The results demonstrated that (1) the flames at ${\phi}<1.59$ exhibited classical double flame structure, at ${\phi}>4.76$, the flames exhibited diffusion flame structure, and the intermediate flames at $1.59<{\phi}<4.76$ was a merged flame, (2) the $OH^{\ast}$ peak was located inside the $CH^{\ast}\;and\;C_2^{\ast}$ radical for all measured conditions and the emission intensity ratio of $C_2^{\ast}/CH^{\ast}\;and\;C_2^{\ast}/OH^{\ast}$ were identified as good marker for local equivalence ratio over a range of ${\phi}=0.79{\sim}1.2\;and\;CH^{\ast}/OH^{\ast}\;is\;0.79<{\phi}<1.9$. However, it was difficult to predict the equivalence ratio in partially premixed flames using this system for ${\phi}>2.38$, (3) the minimum NOX emission index (EINOx) is obtained for a equivalence ratio of 3.19 in the intermediate flames.

메탄 공기 층류 부분 예혼합화염에서 예혼합 정도에 따른 화염구조와 질소산화물의 배출에 미치는 영향에 관한 연구

오정석(Jeong Seog Oh),정용기(Yong Ki Jeong),전층환(Chung Hwan Jeon),장영준(Young June Chang) 대한기계학회 2003 대한기계학회 춘추학술대회 Vol.2003 No.11

It is shown that the effect of variable parameters on flame structures and NOx emissions in the laminar<br/> partially premixed methane-air flames with a co-axial Bunsen burner. Objectives of this paper is to<br/> understand the effects of flow variables on NOx emissions and the flame structure with OH<br/> chemiluminescence, including reconstructed image by abel inversion processing at each conditions. A fuel<br/> flowrate of 200 [cc/min] was fixed and the amount of air was varied from 400 to 1200 [cc/min]. The<br/> experimental variables were equivalence ratio( ), fuel split percentage( ) and inner tube recess(x/D). Flow<br/> conditions were ranged from 1.36~4.76(equivalence ratio), 50~100(fuel split percentage) and 0~20(inner<br/> tube recess). NOx analyzer and ICCD camera with a OH filter were used as a main experimental<br/> apparatus. In addition, Abel inversion, which is a kind of tomography and valuable to estimate a<br/> two-dimensional structure of co-axial flames from cubical information, was employed for combustion<br/> diagnostics. Results from this study indicate that the main effects depend on equivalence ratio and next<br/> sigma, x/D for NOx production and OH formation. Throughout Abel inversion, we could affirm the<br/> maximum position and the tendency of OH radical intensity by variants at five axial heights above the<br/> burner exit.

이중동축 메탄/공기 층류 부분 예혼합화염에서의 화염구조와 자발광 배출 특성 안쪽관 연료주입의 영향

오정석(Jeong Seog Oh),정용기(Yong Ki Jeong),전충환(Chung Hwan Jeon),장영준(Young June Chang) 대한기계학회 2004 대한기계학회 춘추학술대회 Vol.2004 No.11

In this study, the effect of central fuel injection on a coaxial laminar CH₄/air flame was experimented at the defined premixing condition(φ=1.90, σ=50/75/100%, x/D=10). The partial premixing parameter are the equivalence ratio that total fuel is fixed at 200cc/min, the fuel split degree which means the percentage of fuel entering the outer tube to the total amount, and the mixing distance indicating the nonreactant mixture's homogeneity between inner tube top and burner exit. The object is to investigate the flame structure and chemiluminescence characteristics of laminar partial premixed flame as changing mixing parameters. The radical signal was acquired from ICCD camera and PMT. Each intensity was compared with Abel inverted value for measuring the effect of background light on the peak signal location and the intensity at central preheat zone. The results show that the peak location of each radical was broaden as the fuel split degree increasing because the mixing quality was enhanced. and OH* is a good indicator for flame front between reaction and preheat zone. At last C₂* has the same tendency with CH* but a thinner reaction zone than CH* due to a rapid decay on the burned gas side.

ESO기법을 이용한 신뢰성 기반 형상 최적설계

오영규,박재용,황승민,임민규,박재용,한석영 한국공작기계학회 2009 한국공작기계학회 춘계학술대회논문집 Vol.2009 No.-

This paper presents a reliability-based shape optimization (RBSO) using the evolutionary structural optimization (ESO). An actual design involves uncertain conditions such as material property, operational load and dimensional variation. The deterministic optimization (DO) is obtained without considering uncertainties related to uncertainty parameters. However, the RBSO can consider the uncertainty variables because it has the probabilistic constraints. In order to determine whether the probabilistic constraint is satisfied or not, simulation techniques and approximation methods are developed. In this paper, the reliability-based shape design optimization method is proposed by utilizing the reliability index approach (RIA), performance measure approach (PMA), single-loop single-vector (SLSV), adaptive-loop (AOL) are adopted to evaluate the probabilistic constraint. In order to apply the ESO method to the RBSO, a sensitivity number is defined as the change in the displacement. Numerical examples are presented to compare the DO with the RBSO. The results of design example show that the RBSO model more reliable than deterministic shape optimization.

체적제어를 이용한 신뢰성 기반 위상 최적화

박재용,황승민,임민규,오영규,박재용,한석영 한국공작기계학회 2009 한국공작기계학회 춘계학술대회논문집 Vol.2009 No.-

This paper presents a reliability-based topology optimization (RBTO) using bi-directional evolutionary structural optimization (BESO). An actual design involves uncertain conditions such as material property, operational load and dimensional variation. Deterministic topology optimization (DTO) is obtained without considering of uncertainties related to the uncertainty parameters. However, the RBTO can consider the uncertainty variables because it has the probabilistic constraints. In this paper, the reliability index approach (RIA) is adopted to evaluate the probabilistic constraint. RBTO based on BESO starting from various design domains produces a similar optimal topology each other. Numerical examples are presented to compare the DTO with the RBTO.

순차적 크리깅기법을 이용한 미소혼합기의 최적화

박재용,유진식,황승민,임민규,오영규,김용대,한석영,맹주성 한국공작기계학회 2008 한국공작기계학회 추계학술대회논문집 Vol.2008 No.-

An active micro-mixer, which is composed of an oscillating micro-stirrer in the micro-channel to provide effective mixing was optimized. The effects of molecular diffusion and disturbance by the stirrer were considered with regard to two types of mixer models: the simple straight micro-channel and micro-channel with an oscillating stirrer. Two types of mixer models were studied by analyzing mixing behaviors such as their interaction after the stirrer. The mixing was calculated by Lattice Boltzmann methods using the D2Q9 model. In this study, the time-averaged mixing index formula was used to estimate the mixing performance of time-dependent flow. The mixing indices of the two models were compared. From the results, it was found that the mixer with an oscillating stirrer was much more enhanced' and stabilized. Therefore, an approximate optimization of an active micro-mixer with an oscillating stirrer was performed using Kriging method with OLHD (Optimal Latin Hypercube Design) in order to determine the optimal design variables. The design parameters were established as the frequency, the length and the angle of the stirrer. The optimal values were obtained as 1.5754, 0.803D and ±45°, respectively. It was found that the mixing index of the optimal design increased by 83.36% compared with that of the original design.

신뢰성 지수에 의한 위상최적화

임민규,박재용,황승민,오영규,박재용,한석영 한국공작기계학회 2009 한국공작기계학회 춘계학술대회논문집 Vol.2009 No.-

The objective of this work is to integrate reliability analysis into topology optimization problems. The reliability index determines design domain and uncertainty value. The elemental sensitivity numbers are calculated from finite element analysis and then converted to the nodal sensitivity numbers in the design domain. A mesh-independency filter using nodal variables is introduced to determine the addition of elements and eliminate unnecessary structural details below a certain length scale in the design. To further enhance the convergence of the optimization process, the accuracy of elemental sensitivity numbers is improved by its historical information. Application of the RBTO model gives a different topology relative to DTO. It is found that the RBTO model yields more reliable optimal topologies than those produced by DTO.

합성하수를 이용한 금속 막의 정밀여과 특성 및 막 오염 제어

정종태,김종오,김학균,김석구,이용재 7개 국립대학교 환경연구 논문집 공동발행 위원회 2004 공업기술연구 Vol.4 No.-

This study was to evaluate the filtration performance of metal membrane with synthetic wastewater and to investigate the effective control of membrane fouling using ozone backwashing. The increase of substrate concentration caused the increase of cake layer resistance and total resistance, however, plugging resistance decreased. Total resistance of metal membrane was mainly attributed to the permeate resistance of cake layer, which was formed by deposited particles from the physico-chemical interactions of solids on membrane surface. Intermittent ozone backwashing was more effective then the air backwashing for fouling reduction. The permeation flux recovery of air backwashing decreased over 50%, however, ozone backwashing decreased less than 10% for 4 hours filtration. This may be ascribed to the degradation of foulants in pore structure by the strong oxidation of ozone and physical exfoliation of cake layer on membrane surface with backwashing.

양방향 요소제거법을 이용한 신뢰성 기반 최적설계

유진식,박재용,황승민,임민규,오영규,한석영 한국공작기계학회 2008 한국공작기계학회 추계학술대회논문집 Vol.2008 No.-

This research presents a Reliability-Based Topology Optimization (RBTO) using Bi-directional Evolutionary Structural Optimization (BESO). An actual design involves uncertain conditions such as material property, operational load and dimensional variation. Deterministic Topology Optimization (DTO) is obtained without considering of uncertainties related to the uncertainty parameters. However, RBTO involves evaluation of probabilistic constraints, which can be done in two different ways, the reliability index approach (RIA) and the performance measure approach (PMA). The reliability index approach (RIA) and the performance measure approach (PMA) are adopted to evaluate the probabilistic constraints. In order to apply the BESO method to the RBTO, sensitivity number is defined as the change in the reliability index due to the addition or the removal of the ith element. In the BESO, a mesh-independency filter using nodal variables is used to remove the checkerboard patterns. The optimal topologies of RIA and PMA are obtained very similarly. It is shown that RBTO based on BESO can be effectively applied from the presented examples.

비지가 발생하지 않는 두유 제조공정 및 전두유의 특성

김성란,박용곤,석호문,오승훈 한국콩연구회 2002 韓國콩硏究會誌 Vol.19 No.1

Whole soybean milk is a functional soymilk produced by mixing of soymilk and Bejee (soymilk residue) slurry. Application of enzymatic technology for disintegrating the coarse and fibrous materials in soymilk residue, and development of biomill reactor for reducing reaciton time make possible to produce new soymilk in domestic industry. Whole soybean milk is environmental affiliated product without discharging any waste such as Bejee ets. Whole soybeen milk has good taste and flavour without coarse mouthfeel induced by including Bejee particle, as well as contains more dietary fiber, protein, oligosaccharide, and other functional compounds than general soymilks. Important values of whole soybean are utilizing all nutritional properites from whole soybean without dicarding any of the insoluble solid. In this study, producing technologies and nutritional properties of whold soybean milk were investigated.