http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
황태진,김용남,김수곤,강세권,정광호,박소아,윤제웅,한태진,김해영,이미연,김경주,배훈식,서태석 한국물리학회 2015 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.66 No.12
The dose constraint during prostate intensity-modulated radiation therapy (IMRT) optimization should be patient-specific for better rectum sparing. The aims of this study are to suggest a novel method for automatically generating a patient-specific dose constraint by using an experience-based dose volume histogram (DVH) of the rectum and to evaluate the potential of such a dose constraint qualitatively. The normal tissue complication probabilities (NTCPs) of the rectum with respect to V%ratio in our study were divided into three groups, where V%ratio was defined as the percent ratio of the rectal volume overlapping the planning target volume (PTV) to the rectal volume: (1) the rectal NTCPs in the previous study (clinical data), (2) those statistically generated by using the standard normal distribution (calculated data), and (3) those generated by combining the calculated data and the clinical data (mixed data). In the calculated data, a random number whose mean value was on the fitted curve described in the clinical data and whose standard deviation was 1% was generated by using the ‘randn’ function in the MATLAB program and was used. For each group, we validated whether the probability density function (PDF) of the rectal NTCP could be automatically generated with the density estimation method by using a Gaussian kernel. The results revealed that the rectal NTCP probability increased in proportion to V%ratio, that the predictive rectal NTCP was patient-specific, and that the starting point of IMRT optimization for the given patient might be different. The PDF of the rectal NTCP was obtained automatically for each group except that the smoothness of the probability distribution increased with increasing number of data and with increasing window width. We showed that during the prostate IMRT optimization, the patient-specific dose constraints could be automatically generated and that our method could reduce the IMRT optimization time as well as maintain the IMRT plan quality.
저전력 고속 VLSI를 위한 Fast-Relocking과 Duty-Cycle Correction 구조를 가지는 DLL 기반의 다중 클락 발생기
황태진,연규성,전치훈,위재경,Hwang Tae-Jin,Yeon Gyu-Sung,Jun Chi-Hoon,Wee Jae-Kyung 대한전자공학회 2005 電子工學會論文誌-SD (Semiconductor and devices) Vol.42 No.2
This paper describes a DLL(delay locked loop)-based multi-clock generator having the lower active stand-by power as well as a fast relocking after re-activating the DLL. for low power and high speed VLSI chip. It enables a frequency multiplication using frequency multiplier scheme and produces output clocks with 50:50 duty-ratio regardless of the duty-ratio of system clock. Also, digital control scheme using DAC enables a fast relocking operation after exiting a standby-mode of the clock system which was obtained by storing analog locking information as digital codes in a register block. Also, for a clock multiplication, it has a feed-forward duty correction scheme using multiphase and phase mixing corrects a duty-error of system clock without requiring additional time. In this paper, the proposed DLL-based multi-clock generator can provides a synchronous clock to an external clock for I/O data communications and multiple clocks of slow and high speed operations for various IPs. The proposed DLL-based multi-clock generator was designed by the area of $1796{\mu}m\times654{\mu}m$ using $0.35-{\mu}m$ CMOS process and has $75MHz\~550MHz$ lock-range and maximum multiplication frequency of 800 MHz below 20psec static skew at 2.3v supply voltage. 이 논문에서는 낮은 stand-by power 및 DLL의 재동작 후 fast relocking 구조를 가지는 저전력, 고속 VISI 칩용 DLL(지연 고정 루프) 기반의 다중 클락 발생기를 제안하였다. 제안된 구조는 주파수 곱셈기를 이용하여 주파수 체배가 가능하며 시스템 클락의 듀티비에 상관없이 항상 50:50 듀티비를 위한 Duty-Cycle Correction 구조를 가지고 있다. 또한 DAC를 이용한 디지털 컨트롤 구조를 클락 시스템이 standby-mode에서 operation-mode 전환 후 빠른 relocking 동작을 보장하고 아날로그 locking 정보를 레지스터에 디지털 코드로 저장하기 위해 사용하였다. 클락 multiplication을 위한 주파수 곱셈기 구조로는 multiphase를 이용한 feed-forward duty correction 구조를 이용하여 지연 시간 없이 phase mixing으로 출력 클락의 duty error를 보정하도록 설계하였다. 본 논문에서 제안된 DLL 기반 다중 클락 발생기는 I/O 데이터 통신을 위한 외부 클락의 동기 클락과 여러 IP들을 위한 고속 및 저속 동작의 다중 클락을 제공한다. 제안된 DLL기반의 다중 클락 발생기는 $0.35-{\mu}m$ CMOS 공정으로 $1796{\mu}m\times654{\mu}m$ 면적을 가지며 동작 전압 2.3v에서 $75MHz\~550MHz$ lock 범위와 800 MHz의 최대 multiplication 주파수를 가지고 20psec 이하의 static skew를 가지도록 설계되었다.
황태진,원동호,이영숙 한국융합보안학회 2018 융합보안 논문지 Vol.18 No.2
스마트폰 사용이 보편화되면서 자연스럽게 서로간의 소통이 메신저를 통하여 이뤄지게 되었다. 하지만 서로간의 대화공간 이 범죄를 공모하는 공간으로도 활용되고 있는 실정이다. 이에 따른 범죄와 관련된 증거들이 스마트폰에 저장된다. 스마트폰 의 특성상 저장정보의 삭제를 손쉽게 할 수 있기 때문에 증거를 신속히 확보 하는 것이 중요하다. 따라서 본 논문에서는 국· 내외에서 대표적으로 사용 중인 모바일 메신저에 대하여 데이터 파일의 아키텍처 분석을 수행하였다. 사용자가 메시지 삭제를 위해 이용할 수 있는 방법에 대한 시나리오를 설정하고 실험을 통해 메시지 복원가능 여부에 대하여 비교 분석한다. As the use of smartphones become more common, the communication via instant messenger becomes natural. However, it is important to secure the relevant information promptly since the chat room between participants can be used as a space for a criminal conspiracy, and crime-related contents can be stored and deleted easily on smartphones. Therefore, this study aims to identify the available data and to use it as proof by comparing and analyzing the instant messengers with high usage rate.
스테인리스표면위에 균열이 없는 실리카 보호막 형성을 위한 다른 크기의 실리카 나노입자 첨가
황태진,이흥렬,김호형,김균탁 한국표면공학회 2010 한국표면공학회 학술발표회 초록집 Vol.2010 No.5
무기질 실리카 보호막 형성을 위하여 전구체로 tetraethoxysilane (TEOS)와 methyltriethoxysilane (MTES)를 사용하였고 크기가 다른 실리카 나노입자를 이용하여 실리카 코팅용액을 합성하였다. 이 코팅용액으로 스테인리스 기판위에 sol-gel 코팅을 실시하였다. 큰 실리카 나노입자와 작은 실리카 나노입자를 동시에 코팅용액에 첨가함으로서 높은 표면활성을 통한 200℃의 저온 열처리공정으로도 균열이 없는 실리카 보호막 형성이 가능하였다. 이와 같이 형성된 실리카 보호막은 실리카 나노입자가 첨가되지 않은 실리카 보호막에 비하여 높은 부착력과 내부식성을 보였다.
N-정책과 준비기간을 갖는 MAP 변조 유체 모형의 분석
황태진,박수혁,이호우,백정우,이세원,노민호 대한산업공학회 2009 대한산업공학회 춘계학술대회논문집 Vol.2009 No.5
본 연구에서는 N-정책과 준비기간(Setup period)을 갖는 MAP 변조 유체 모형을 분석하였다. 본 연구에서 다루는 모형은 기존의 일반적인 마코프 변조 유체 모형과 달리 서어버 제어정책을 가지며, 서어버 제어정책에 의해 일반적인 마코프 변조 유체 모형과 다른 유휴기간을 가진다. 본 모형은 유체량과 독립적으로 변화하는 시스템 위상을 가지고 있으며, 이 시스템 위상은 UMC(Underlying Markov Chain) 상태에 따라 변화하게 된다. 본 연구에서는 여러 가지 제어정책들 중에서 N-정책과 준비기간을 따르는 MAP 변조 유체 모형의 유체량에 관해 분석하고, 그 결과로 유체량 분포를 유도하고자 한다.
N-정책과 준비기간을 갖는 MAP 변조 유체 모형의 분석
황태진,박수혁,이호우,백정우,이세원,노민호 한국경영과학회 2009 한국경영과학회 학술대회논문집 Vol.2009 No.5
본 연구에서는 N-정책과 준비기간(Setup period)을 갖는 MAP 변조 유체 모형을 분석하였다. 본 연구에서 다루는 모형은 기존의 일반적인 마코프 변조 유체 모형과 달리 서어버 제어정책을 가지며, 서어버 제어정책에 의해 일반적인 마코프 변조 유체 모형과 다른 유휴기간을 가진다. 본 모형은 유체량과 독립적으로 변화하는 시스템 위상을 가지고 있으며, 이 시스템 위상은 UMC(Underlying Markov Chain) 상태에 따라 변화하게 된다. 본 연구에서는 여러 가지 제어정책들 중에서 N-정책과 준비기간을 따르는 MAP 변조 유체 모형의 유체량에 관해 분석하고, 그 결과로 유체량 분포를 유도하고자 한다.