http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전극 구조 변화에 따른 Cold Hollow Cathode Ion Source의 특성 변화
석진우,한성,백영환,고석근,윤기현,Seok, Jin-Woo,Chernysh, V.S.,Han, Sung,Beag, Young-Hwoan,Koh, Seok-Keun,Yoon, Ki-Hyun 한국세라믹학회 2003 한국세라믹학회지 Vol.40 No.10
직경 5 cm cold hollow cathode 이온원을 박막의 이온보조증착법 또는 이온보조반응법에 사용하기에 적합한 이온빔으로 넓은 면적을 균일하게 조사할 수 있는 이온원을 설계, 제작하기 위한 방안으로 연구하게 되었다. 이온원은 글로우 방전을 위한 음극과 이온화 효율의 증가를 위한 자석, 플라즈마 챔버, 그리드 전극으로 이루어진 이온광학시스템, 직류전원공급장치로 이루어진다. 전자인출전극의 구조 및 형태로 구분하여 한개의 노즐로 이루어진 (I) 형태와 복수개의 노즐로 변형된 (II) 형태로 제작하였다. 서로 다른 구조의 전자인출전극 (I)형태와 (II) 형태를 부착한 이온원에 beam profile을 측정한 결과 (I) 형태의 전자인출전극을 부착한 경우에는 이온원의 중심에서 140 $\mu\textrm{A}$/$\textrm{cm}^2$으로 측정되어 졌으며, 외곽으로 멀어질수록 급격히 전류밀도가 감소하여 균일한 영역(최대값의 90%)은 직경 5 cm로 측정되어졌다. (II) 형태로 변형되어진 이온원의 경우 중심에서 65 $\mu\textrm{A}$/$\textrm{cm}^2$으로 (I) 형태와 비교하여 상대적으로 낮은 전류밀도가 측정되었지만 외각으로 멀어졌을 경우에도 전류밀도는 완만하게 감소하여 균일한 영역은 직경 20 cm로 측정되었으며, 본 연구목적에 부합되는 특성이 측정되었다. 이온빔 균일도가 증가한 (II) 형태의 전자인출전극을 부착한 이온원으로 주입하는 아르곤 가스량의 변화, 이온광학시스템의 플라즈마 그리드 전극과 가속 그리드 전극 간격의 조절, 이온빔 에너지 변화에 따른 beam profile 및 특성을 괸찰하였다. The inner-diameter 5 cm cold hollow cathode ion source was designed for the high current density and the homogeneous beam profile of ion beam. The ion source consisted of a cylindrical cathode, a generation part of magnetic field, a plasma chamber, convex type ion optic system with two grid electrode, and DC power supply system. The cold hollow cathode ion sources were classified into standard type (I), electron output electrode modified type (II). The operation of the ion source was done with discharge current, ion beam potential and argon gas flow rate. The modification of electron output electrode resulted in uniform plasma generation and uniform area of ion beam was extended from 5 cm to 20 cm. Improved ion source was evaluated with beam uniformity, ion current, team extraction efficiency, and ionization efficiency.
일차성쇼그렌증후군 환자에서 폐결핵 치료 중 발생한 Rifampin 유발 면역용혈성빈혈
석진우,김양기,장계일,정현석,어수택,김기업,구소미,이보영,노현진,신우용,신정원,진소영 대한수혈학회 2019 大韓輸血學會誌 Vol.30 No.3
Drug-induced immune hemolytic anemia is a rare disease that occurs in 1 in 1 million individuals of the general population. Rifampin-induced immune hemolytic anemia is caused by drug-dependent antibodies and this can be treated without complication by drug cessation. Herein, we present a case of rifampin-induced immune hemolytic anemia in a patient with primary Sjogren’s syndrome (pSS) which occurred during treatment of pulmonary tuberculosis. At admission, the patient’s laboratory tests revealed hemolytic anemia and positive direct antiglobulin test result. Since the incidence of autoimmune hemolytic anemia (AIHA) in pSS is reported to be 3 percent, which is higher than that of the general population, differential diagnosis between AIHA and rifampin-induced immune hemolytic anemia was required for planning future anti-tuberculous treatment. We identified rifampin-dependent antibody by drug-induced immune complex test and diagnosed rifampin-induced immune hemolytic anemia. Based on this experience, if rifampin administration is considered in patients with systemic autoimmune disease such as pSS, which has a high incidence of AIHA, we suggest evaluating the presence and the cause of hemolytic anemia at baseline by testing serum lactate dehydrogenase, haptoglobin, and direct and indirect antiglobulin tests before drug administration to promptly identify the cause of hemolysis if hemolytic anemia develops. (Korean J Blood Transfus 2019;30:246-252)
마이크로밀링에서 피에조 구동기의 전압제어를 이용한 원주가공의 성능향상
석진우,정병묵,고태조,김희술,박종권 한국공작기계학회 2005 한국공작기계학회 춘계학술대회논문집 Vol.2005 No.-
Recently, there are many studies for the micro-machining using Piezo actuator. However, because of its step by step motion, it is nearly impossible to increase the machining accuracy for a circular path. To increase the accuracy, it is well known that it is necessary the finer and synchronous movement for x-y axes. Therefore, this paper proposes a voltage control for finer movement of the actuator, and realizes a synchronous control for the x-y axes. The experimental results show that the machining accuracy is remarkably improved.
이온보조반응법에 의한 Polyethylene(PE) 표면의 친수성 증가
석진우(Jin-Woo Seok),최성창(Sung-Chang Choi),장홍규(Hong-Gui Jang),정형진(Hyung-Jin Jung),최원국(Won-Kook Choi),고석근(Seok-Keun Koh) 한국진공학회(ASCT) 1997 Applied Science and Convergence Technology Vol.6 No.3
고분자 Polyethylene(PE) film 표면을 1 keV의 산소 이온 빔만을 사용하여, 또는 산소 분위기에서 1 keV의 아르곤 이온 빔으로 조사하는 이온보조반응(ion assisted reaction)법을 이용하여 개질을 하였다. 개질된 polyethylene 표면의 친수성(wettability)과 표면 에너지를 측정하기 위해 접촉각 측정기(contact angle micrometer)를 사용하였으며, 개질 된 표면의 화학적 변화를 측정하기 위해 x-ray photoelectron spectroscopy(XPS)를 이용하였다. 표면 개질을 위한 이온 조사량은 1×10¹⁴-1×10^(17) ions/㎠, 산소 가스는 0~4 sccm(ml/min.) 까지 변화 시켰다. 산소 이온 빔만으로 조사 후 polyethylene 표면과 물과의 접촉각은 95˚에서 최대 62˚까지 변화하였으며, 산소를 4 sccm(ml/min.) 주입하면서 아르곤 이온 빔으로 조사하면 물과의 접촉각이 최대 28˚까지 감소하였으며, 이 때 이온 조사량은 1×10^(17) ions/㎠ 이었다. 또한 polyethylene을 산소 이온 빔으로만 표면 개질시 표면 에너지는 작은 증가를 보였으며, 산소 분위기에서 아르곤 이온 빔으로 표면 개질 하였을 때에는 표면 에너지가 2배에 가까운 증가를 하였다. 이와 같은 표면의 친수성과 표면 에너지의 증가는 이온보조반응법에 의해 polyethylene의 표면을 산소 분위기에서 아르곤 이온 빔으로 조사한 시료의 XPS의 spectra 결과로 보아 PE의 표면에 C-O 또는 C=O와 관련된 결합의 증가로 인한 친수성 작용기가 polyethylene 표면에 형성되었기 때문이라고 사료된다. Surface of polyethylene film was modified by ion assisted reaction in which ion beam is irradiated on polymer in reactive gas environments. Ion (argon and oxygen) beam energy was 1 keV, doses were varied from 1×10¹⁴-1×10^(17) ions/㎠, and amount of blowing oxygen from 0 to 4 sccm(ml/min). Wettability was measured by water contact angle measurement, and the surface functionality was analyzed by x-ray photoelectron spectroscopy. The contact angles of water to polyethylene modified by oxygen ion beam only decrease from 95 to degrees, and surface energy was not changed much. The contact angles remarkably decrease to 28 degrees and surface energy increase to 67 erg/㎠ when the films were modified by argon ion with various ion doses with blowing oxygen gases near the polyethylene surface. Improvement of wettability and surface energy are mainly due to the new functional group formation such as C-O or C=O, which are known as hydrophilic groups from the XPS analysis, and the ion assisted reaction is very effective to attach oxygen atoms to form functional groups on C-C bond chains of polyethylene.