산화물 혼합상이 페라이트계 P/M스테인리스강의 고온산화 및 전기저항 안정성에 미치는 영향

박진우,고병현,정우영,박동규,안인섭,Park, Jin-Woo,Ko, Byung-Hyun,Jung, Woo-young,Park, Dong-Kyu,Ahn, In-Shup 한국분말야금학회 2016 한국분말재료학회지 (KPMI) Vol.23 No.3

In order to improve the high-temperature oxidation stability, sintered 434L stainless steel is studied, focusing on the effect of the addition of metallic oxides to form stable oxide films on the inner particle surface. The green compacts of Fecralloy powder or amorphous silica are added on STS434L and oxidized at $950^{\circ}C$ up to 210 h. The weight change ratio of 434L with amorphous silica is higher than that of 434L mixed with Fecralloy, and the weight increase follows a parabolic law, which implies that the oxide film grows according to oxide diffusion through the densely formed oxide film. In the case of 434L mixed with Fecralloy, the elements in the matrix diffuse through the grain boundaries and form $Al_2O_3$ and Fe-Cr oxides. Stable high temperature corrosion resistance and electrical resistivity are obtained for STS434L mixed with Fecralloy.

타당성 평가가 보완된 모델 운용상의 전투실험 모의분석 절차 연구

박진우,김능진,강성진,서혁,Park, Jin-Woo,Kim, Nung-Jin,Kang, Sung-Jin,Soo, Hyuk 한국시뮬레이션학회 2010 한국시뮬레이션학회 논문지 Vol.19 No.4

Currently, our society has been changed from the industrial society to the information society. As the war progresses to Information Warfare, Network-Centric Warfare, Long-Range Precision Engagement and Robot Warfare, the military should advance to High-tech Scientific force. For this creation of the war potential, it is regarded as the warfighting experiment is a critical method. Surely it is rational that LVC(Live Virtual Constructive simulation) is desirable to make the warfighting experiment. But because it is limited by the cost, the time, the place and the resource, the constructive simulation(M&S : Modeling&Simulation) is a good tool to solve those problems. There are some studies about the evaluation process for developing the model, but it is unsatisfying in the process of the constructive simulations' operation. This study focuses on the way of constructive simulation operation, which is supplied with the evaluation process(VV&A : Verification Validation & Accreditation). We introduce the example of the rear area operation simulation for "appropriateness evaluation to the organization of logistic corps" by the AWAM(Army Weapon Analysis Model). This study presents the effective methods of the constructive simulations, which is based on the reliable evaluation process, so it will contribute to the warfighting experiments.

P/M Fecralloy 성형체의 고온산화 및 전기저항 안정성에 미치는 SiO₂ 첨가 효과

박진우,옥진욱,정우영,박동규,안인섭,Park, Jin-Woo,Ok, Jin-Uk,Jung, Woo-young,Park, Dong-kyu,Ahn, In-Shup 한국분말야금학회 2017 한국분말재료학회지 (KPMI) Vol.24 No.4

A metallic oxide layer of a heat-resistant element contributes to the high-temperature oxidation resistance by delaying the oxidation and has a positive effect on the increase in electrical resistivity. In this study, green compacts of Fecralloy powder mixed with amorphous and crystalline silica are oxidized at $950^{\circ}C$ for up to 210 h in order to evaluate the effect of metal oxide on the oxidation and electrical resistivity. The weight change ratio increases as per a parabolic law, and the increase is larger than that observed for Fecralloy owing to the formation of Fe-Si, Fe-Cr composite oxide, and $Al_2O_3$ upon the addition of Si oxide. Si oxides promote the formation of $Al_2O_3$ and Cr oxide at the grain boundary, and obstruct neck formation and the growth of Fecralloy particles to ensure stable electrical resistivity.

P/M Fecralloy의 성형성 및 전기저항특성 향상에 관한 연구

박진우,고병현,정우영,박동규,안인섭,Park, Jin-Woo,Ko, Byung-Hyun,Jung, Woo-Young,Park, Dong-Kyu,Ahn, In-Shup 한국분말야금학회 2016 한국분말재료학회지 (KPMI) Vol.23 No.6

The Fe-Cr-Al alloy system shows an excellent heat resistance because of the formation of an $Al_2O_3$ film on the metal surface in an oxidizing atmosphere at high temperatures up to $1400^{\circ}C$. The Fecralloy needs an additive that can act as a binder because of its bad compactability. In this study, the green compacts of STS434L and Al powder added to Fecralloy are oxidized at $950^{\circ}C$ for up to 210 h. Fecralloy and Al is mixed by two types of ball milling. One is vented to air and the other was performed in a sealed jar. In the case of Al addition, there are no significant changes in the electrical resistance. Before the oxidation test, Al oxides are present in the Fecralloy surface, as determined from the energy dispersive spectroscopy results. The addition of Al improves the compactability because of an increased density, and the addition of STS434L increases the electrical resistivity by forming a composite oxide.

갑상선 종양의 발병 기전

박진우,Jin-Woo Park 대한갑상선-내분비외과학회 2010 The Koreran journal of Endocrine Surgery Vol.10 No.2

Thyroid tumors display an intriguing biological diversity from benign follicular adenomas to lethal anaplastic carcinomas. Thyroid tumorigenesis is becoming better understood. Benign follicular adenomas are frequently associated with mutation of the thyrotrophin receptor, G alpha s or RAS. Although confirmatory studies are necessary, the present knowledge concerning the similarity in gene expression profiling between follicular adenomas and follicular carcinomas supports the progression of adenoma to carcinoma sequence. Four major genetic aberrations in follicular cell- derived thyroid carcinomas such as papillary, follicular, and Hurthle cell carcinomas include mutations of BRAF or RAS, and chromosomal rearrangement of RET/papillary thyroid tumor or PAX8/peroxisome proliferator-activated receptor gamma. Differentiated thyroid carcinomas of follicular cell origin dedifferentate to poorly differentiated or anaplastic thyroid carcinomas through mutation of p53 and CTNNB1. Familial nonmedullary thyroid carcinomas are heterogenous in genetic profiling, but some genes have been investigated as candidates for causative genetic aberration. Ret mutations can cause medullary thyroid carcinomas. A genotype-phenotype relationship helps to decide prophylactic thyroidectomiesin family members of hereditary medullary carcinomas such as MENIIa or MENIIb. Primary thyroid lymphomasare closely related with Hashimoto's thyroiditis. Recent novel and promising findings include additional abnormalities in the regulation of microRNA expression, polymorphisms associated with thyroid cancer susceptibility and epigenetic changes. A newly proposed fetal cell carcinogenesis hypothesis explains more about thyroid tumorigenesis than classical multi-step carcinogenesis model, but is not yet firmly supported by evidence. Future studies need to uncover new molecular mechanisms in thyroid tumorigenesis and to provide novel therapeutic targets for thyroid carcinomas. (Korean J Endocrine Surg 2010;10:79-87)

도데실기를 함유한 제4급 암모늄염의 합성과 감량촉진제로서의 응용

박진우,함현식,박홍수 ( Jin Woo Park,Hyun Sik Hahm,Hong Soo Park ) 한국유화학회 1995 한국응용과학기술학회지 Vol.12 No.1

Some weight loss accelerating agents. dodecyltrimethylammonium chloride(DTAC), dodechltrimethylammonium chloride(PDBAC), and 1-(2-hydroxyethyl)-1-benzyl-2-undecylimidazolinium chloride(AEUIC), were synthesized. As a result of weight loss treatment of the weight loss accelerating agents with NaOH to PET fiber, the increase of weight loss was the order of PDBAC > DDBAC > DTAC > DTAB > AEUIC. Among the weight loss accelerating agents, AEUIC hardly showed weight loss effect, and it was separated into two layer in the NaOH solution at the treatment concentration above 6g/L, but POBAC showed good weight loss effect of 21% that approach almost to a theoretical weight loss, 21.6%, at the concentration above 8g/L.

다중 대역 이동 통신 단말기용 이중 반파장 로디드 라인 안테나 설계

박진우,김덕구,정병운,박면주,정용식,이병제,Park, Jin-Woo,Kim, Duk-Gu,Jung, Byung-Woon,Park, Myun-Joo,Cheong, Young-Seek,Lee, Byung-Je 한국전자파학회 2007 한국전자파학회논문지 Vol.18 No.3

본 논문에서는 다중 대역 이동 통신 단말기로의 적용을 위하여 이중 반파장 로디드 라인 구조를 이용한 주파수 가변 안테나가 제안되었다. 제안된 안테나는 추가된 두 개의 인덕턴스 값의 조절을 통하여 두 개의 대역에서 독립적인 주파수 이동이 가능하다. 제작된 안테나의 측정을 통하여 이 안테나는 약 0.54 dB의 적은 최대 이득 변화 내에서 $CELLULAR(824\sim894\;MHz)$, $EGSM(880\sim960\;MHz)$, $DCS1800(1,710\sim1,880\;MHz)$, $PCS1900(1,850\sim1,990\;MHz)$, $WCDMA(1,920\sim2,170\;MHz)$의 대역을 만족할 수 있는 넓은 유효 대역폭을 가지고 있음을 확인하였다. In this paper, a frequency changeable antenna using dual half wavelength loaded line structure is proposed for multiband mobile handset applications. The proposed antenna has a capability of independent frequency shift by controlling two added inductance values in two different bands. Experimental results indicate that the proposed antenna provides enough effective bandwidth to cover $CELLULAR(824\sim894\;MHz)$, $EGSM(880\sim960\;MHz)$, $DCS1800(1,710\sim1,880\;MHz)$, $PCS1900(1,850\sim1,990\;MHz)$ and $WCDMA(1,920\sim2,170\;MHz)$ bands and peak gain variation is only 0.54 dB.

Cellular activities of osteoblast-like cells on alkali-treated titanium surface

박진우,이덕혜,여신일,박광범,최석규,서조영,Park, Jin-Woo,Lee, Deog-Hye,Yeo, Shin-Il,Park, Kwang-Bum,Choi, Seok-Kyu,Suh, Jo-Young The Korean Academy of Periodontoloy 2007 Journal of Periodontal & Implant Science Vol.37 No.2

임플란트와 골 사이의 결합력을 증가시키기 위하여 타이타늄 표면에 변화를 주기위한 많은 연구들이 진행되고 있다. 타이타늄의 표면 구조나 미세 지지도의 변화가 임플란트에 대한 세포의 반응에 영향을 미치며, 골아 유사세포는 표면 조도가 높은 타이타늄 표면에 더 잘 부착하며, 세포외 기질의 합성과 광물화 결정이 더 잘 일어난다고 알려져 있다. 그러나 대부분의 연구들은 마이크로 단위의 미세 지지도에 대한 연구들이고 나노 단위의 미세 지지도에 대한 연구들은 미미하다. 이에 본 연구에서는 ROS 17/2.8 cell line을 이용하여 기계적 처리만한 군을 대조군으로 하여 blasting 처리한 마이크로 단위의 미세 지지도 표면과 알칼리 처리된 나노 단위의 미세 지지도 표면에 대한 골아 유사세포의 세포 부착양상, 증식 그리고 골아 유사세포의 표식인자 발현양상 등을 상호 비교하여 골아 유사세포에 미치는 영향을 관찰하고자 하였다. SEM을 이용한 미세 지지도 관찰에서 알칼리 처리군에서는 약 200mm의 초미세 다공성의 양상을 나타내었고, blasting 처리한 군에서는 $10\;{\mu}m$ 이하의 움푹 파인 양상을 보였다. 표면조도 측정에 있어서는 blasting 처리한 군에서 기계적 처리와 알칼리 처리된 군보다 더 높은 표면 조도를 보였으며 이는 통계학적으로 유의한 차이를 나타내었다 (p<0.01). 표면결정성 분석에서는 알칼리처리 군에서 anatase와 rutile결정형이 보였으나, blasting 처리한 군과 기계적 처리 군에서는 관찰되지 않았다. 골아 유사세포 1시간 배양 후의 전자현미경 관찰에서 모든 군의 세포는 부착 및 전개 과정을 보였고, 3시간 배양에서는 모든 군의 세포가 더 많이 전개되었으나, blasting 처리한 군과 알칼리처리 군에서 세포가 다소 더 불규칙한 형태를 나타내었다. 24시간 배양에서는 모든 군의 세포에서 완전히 전개가 일어난 양상을 보였다. 1, 4, 7일간 세포배양 후 세포활성을 평가하기 위한 MTT assay에서는 모든 군에서 시간이 증가함에 따라 세포수가 증가하였으며, 1일째에 blasting 처리한 군과 알칼리처리 군에서 기계적 처리 군에 비해 세포활성도가 통계학적으로 유의한 증가를 보였다(p<0.01). 골아 유사세포 표식인자인 osteopontin, alkaline phosphatase, ${\alpha}\;1(1)$ collagen의 유전자 발현양상을 관찰해 본 결과, osteopontin, alkaline phosphatase, ${\alpha}\;1(1)$ collagen의 유전자 발현양상이 세 군 모두에서 유의한 차이는 관찰할 수 없었으나, blasting 처리한 군과 알칼리처리 군에서 기계적 처리 군에 비해 유전자 발현양상이 다소 증가하는 경향을 보였다. 결론적으로 blasting 처리한 마이크로 단위의 미세 지지도 표면과 알칼리 처리된 나노 단위의 미세 지지도 표면이 기계적 처리 군에 비해 골아 유사세포의 기능을 촉진시키나, 알칼리 처리된 나노 단위의 미세 지지도 표면은 blasting 처리한 마이크로 단위의 미세 지지도 표면이 골아 유사세포의 기능에 미치는 영향을 압도하지는 않는 것으로 사료된다. To improve osseointegration at the boneto-implant interface, several studies have been carried out to modify titanium surface. Variations in surface texture or microtopography may affect the cellular response to an implant. Osteoblast-like cells attach more readily to a rougher titanium surface, and synthesis of extracellular matrix and subsequent mineralization were found to be enhanced on rough or porous coated titanium. However, regarding the effect of roughened surface by physical and mechanical methods, most studies carried out on the reactions of cells to micrometric topography, little work has been performed on the reaction of cells to nanotopography. The purpose of this study was to examme the response of osteoblast-like cell cultured on blasted surfaces and alkali treated surfaces, and to evaluate the influence of surface texture or submicro-scaled surface topography on the cell attachment, cell proliferation and the gene expression of osteoblastic phenotype using ROS 17/2.8 cell lines. In scanning electron micrographs, the blasted, alkali treated and machined surfaces demonstrated microscopic differences in the surface topography. The specimens of alkali treatment had a submicro-scaled porous sur-face with pore size about 200 nm. The blasted surfaces showed irregularities in morphology with small(<10 ${\mu}m$) depression and indentation among flatter-appearing areas of various sizes. Based on profilometry, the blasted surfaces was significantly rougher than the machined and the alkali treated surfaces (p<O.01). On the x-ray diffraction analysis, anatase and rutile($TiO_2$) were observed on alkali treated surfaces, whereas not observed on machined and blasted surfaces. The attachment morphology of cells according to time was observed by the scanning electron microscope. After 1 hour incubation, the cells were in the process of adhesion and spreading on the prepared surfaces. After 3 hours, the cells on all prepared surfaces were further spreaded and flattened, however on the blasted and alkali treated surfaces, the cells exhibited slightly irregular shapes and some gaps or spaces were seen. After 24 hours incubation, most cells of the all groups had a flattened and polygonal shape, but the cells were more spreaded on the machined surfaces than the blasted and alkali treated surfaces. The MTT assay indicated the increase on machined, alkali treated and blasted surfaces according to time, and the alkali treated and blasted surfaces showed significantly increased in optical density comparing with machined surfaces at 1 day (p<0.01). Gene expression study showed that mRNA expression level of ${\alpha}\;1(I)$ collagen, alkaline phosphatase and osteopontin of the osteoblast-like cells showed a tendency to be higher on blasted and alkali treated surfaces than on the machined surfaces, although no siginificant difference in the mRNA expression level of ${\alpha}\;1(I)$ collagen, alkaline phosphatase and osteopontin was observed among all groups. In conclusion, we suggest that submicroscaled surfaces on osteoblast-like cell response do not over-ride the one of the surface with micro-scaled topography produced by blasting method, although the microscaled and submicro-scaled surfaces can accelerate osteogenic cell attachment and function compared with the machined surfaces.

CO₂ 수송선 저장탱크의 BOG 측정 실험 및 회수에 관한 연구

박진우,김동선,고민수,조정호,Park, Jin-Woo,Kim, Dong-Sun,Ko, Min-Su,Cho, Jung-Ho 한국청정기술학회 2014 청정기술 Vol.20 No.1

화석연료로부터 에너지를 얻을 때, 연소반응에 의해 이산화탄소가 생성되어 진다. 이렇게 이산화탄소의 배출이 늘어나게 되면 지구온난화 문제가 더욱 심각해지게 된다. 따라서 이를 방지하기 위한 이산화탄소 포집 및 저장기술(carbon capture and storage, CCS) 개발이 요구되고 있다. 하지만 액화 이산화탄소를 수송 시 여러 문제로 인해 지속적으로 BOG (boil-off gas)가 발생하게 된다. 본 연구에서는 $40m^3$저장 탱크 2대에 액화 이산화탄소를 주입하여 압력변화 및 외부열과 선적, 하역 시 발생하는 BOG의 양과 조성을 30일 간 측정하였다. 측정한 결과 16,040 kg의 BOG가 발생하였으며, 조성은 $CO_2$ 99.95%, $N_2$ 0.05%인 것을 알 수 있었다. 또한 상용성 모사기인 PRO/II with PROVISION 9.2를 이용하여 발생한 BOG를 증기 재압축 냉동사이클을 통해 재액화 하는 전산모사를 수행하였다. 그 결과 냉동사이클의 총 순환유량은 42.07 kg/h, 응축기 설비의 소모량은 48.85 kg/h가 나오는 것을 알 수 있었다. $CO_2$ is generated by the combustion reaction, when getting the energy from fossil fuel. If the carbon dioxide emissions increases more, the global warming problem will become more serious. CCS (carbon capture storage) needs to be developed for the prevention of this. When liquefied $CO_2$ is transported, BOG (boil-off gas) is generated because of several problems. In the study, by injecting liquefied $CO_2$ in two tanks which contains $40m^3$each, the amount of BOG and its composition were measured during 30 days when generating pressure changes and external heat, loading, unloading. In result, 16,040 kg of BOG was generated and the composition has been found out to be 99.95% $CO_2$ and 0.05 % $N_2$. Also, we conducted simulation process for reliquefaction of generated BOG with vapor compression cycle using the PRO/II with PROVISION version 9.2. As a result, the refrigeration cycle of the total circulation flow rate was 42.07 kg/h and the condenser utility consumption was 48.85 kg/h.

무인 항공기 탑재용 Ku대역 안테나에 관한 연구

박진우,류지호,Park, Jin-Woo,Ryu, Ji-Ho 한국군사과학기술학회 2014 한국군사과학기술학회지 Vol.17 No.1

In this paper, we proposed a Ku-band antenna that can be mounted on UAV. A proposed antenna structure has small size and light weight. It is considered long distance communication environment(LOS) and equipped UAV. Proposed antenna is designed $16{\times}2$ aperture coupled microstrip patch array antenna for high gain characteristics. In the measurement results, VSWR is less than 1.5 and the gain is over 21dBi in the bandwidth. Mechanical specifications of antenna assembly are ${\phi}250{\times}200mm$ of size and 3kg of weight.