DCT-기반 영상/비디오 보안을 위한 암호화 기법 및 하드웨어 구현

박성호,최현준,서영호,김동욱,Park Sung-Ho,Choi Hyun-Jun,Seo Young-Ho,Kim Dong-Wook 대한전자공학회 2005 電子工學會論文誌-SP (Signal processing) Vol.42 No.2

년 논문에서는 MPEG과 JPEG, H.26X 계열 등의 DCT-기반 영상/비디오 컨텐츠에 효과적인 암호화 방법을 제안하였고, 이를 최적화된 하드웨어로 구현하여 고속동작이 가능하도록 하였다. 영상/비디오의 압축, 복원 및 암호화로 인한 많은 연산량을 고려하여 영상의 중요한 정보(DC 및 DPCM계수)만을 암호화 대상 데이터로 선정하여 부분 암호화를 수행하였다. 그 결과 암호화에 소요되는 비용은 원 영상 전체를 암호화하는 비용이 감소하였다. 여기서 Nf는 GOP내의 프레임수이고 PI는 B와 P 프레임에 존재하는 인트라 매크로블록의 수이다. 암호화 알고리즘으로는 다중모드 AES, DES, 그리고 SEED를 선택적으로 사용할 수 있도록 하였다. 제안한 암호화 방법은 C++로 구현한 소프트웨어와 TM-5를 사용하여 약 1,000개의 영상을 대상으로 실험하였다 그 결과 부분 암호화된 영상으로부터 원 영상을 추측할 수 없어 암호화 효과가 충분함을 확인하였으며, 이 때 암호화에 의한 압축률 감소율은 $1.6\%$에 불과하였다. Verilog-HDL로 구현한 하드웨어 암호화 시스템은 하이닉스 $0.25{\mu}m$ CMOS 팬텀-셀 라이브러리를 사용하여 SynopsysTM의 디자인 컴파일러로 합성함으로써 게이트-수준 회로를 구하였다. 타이밍 시뮬레이션은 CadenceTM의 Verilog-XL을 이용해서 수행한 결과 100MHz 이상의 동자 주파수에서 안정적으로 동작함을 확인하였다. 따라서 제안된 암호화 방법 및 구현된 하드웨어는 현재 중요한 문제로 대두되고 있는 종단간(end-to-end) 보안에 대한 좋은 해결책으로 유용하게 사용될 수 있으리라 기대된다. This thesis proposed an effective encryption method for the DCT-based image/video contents and made it possible to operate in a high speed by implementing it as an optimized hardware. By considering the increase in the amount of the calculation in the image/video compression, reconstruction and encryption, an partial encryption was performed, in which only the important information (DC and DPCM coefficients) were selected as the data to be encrypted. As the result, the encryption cost decreased when all the original image was encrypted. As the encryption algorithm one of the multi-mode AES, DES, or SEED can be used. The proposed encryption method was implemented in software to be experimented with TM-5 for about 1,000 test images. From the result, it was verified that to induce the original image from the encrypted one is not possible. At that situation, the decrease in compression ratio was only $1.6\%$. The hardware encryption system implemented in Verilog-HDL was synthesized to find the gate-level circuit in the SynopsysTM design compiler with the Hynix $0.25{\mu}m$ CMOS Phantom-cell library. Timing simulation was performed by Verilog-XL from CadenceTM, which resulted in the stable operation in the frequency above 100MHz. Accordingly, the proposed encryption method and the implemented hardware are expected to be effectively used as a good solution for the end-to-end security which is considered as one of the important problems.

척수 원위부에 발생한 경막내수막외 혈관아세포종 - 증례보고 -

박성호,조준,윤승환,장상근,Park, Sung-Ho,Cho, Joon,Youn, Seung-Whan,Chang, Sang-Keun 대한신경외과학회 2000 Journal of Korean neurosurgical society Vol.29 No.11

It has been known that hemangioblastoma of spinal cord occurs about 4% of all the spinal tumors. The authors present a rare case of intradural extramedullary(IDEM) hemangioblastoma of distal spinal cord in 41-year-old male patient. This IDEM mass at the level of conus medullaris showed iso-signal intensities on T1-weighted image(T1-WI) and high-signal intensities on T2-WI, and was enhanced homogeneously on MRI. At surgery, T12- L1 total laminectomy and enbloc mass removal were performed. This IDEM hemangioblastoma was confirmed by histopathologic findings. For less postoperative complication in IDEM tumors, we suggest that precise preoperative evaluation and complete excision via proper surgical approach to distal conus should be reemphasized.

소결온도 및 SiO₂ 첨가량에 따른 탄화규소의 마모 특성

박성호,박원조,윤한기,Park, Sung-Ho,Park, Won-Jo,Yoon, Han-Ki 대한기계학회 2008 大韓機械學會論文集A Vol.32 No.11

In this study, liquid phase sintered SiC (LPS-SiC) materials were made by hot pressing method. The particle size of nano-SiC powder was 30nm. Alumina ($Al_2O_3$), yttria ($Y_2O_3$) and silica ($SiO_2$) were used for sintering additives. To investigate effects of $SiO_2$, ratios of $SiO_2$ contents were changed by five kinds. Materials have been sintered for 1 hour at $1760^{\circ}C$, $1780^{\circ}C$ and $1800^{\circ}C$ under the pressure of 20MPa. The system of sintering additives which affects a property of sintering as well as the influence depending on compositions of sintering additives were investigated by measurement of density, mechanical properties such as flexural strength, vickers hardness and sliding wear resistance were investigated to make sure of the optimum condition which is about matrix of $SiC_f$/SiC composites. The abrasion test condition apply to load of 20N at 100RPM for 20min. Sintered density, flexural strength of fabricated LPS-SiC increased with increasing the sintering temperature. And in case of LPS-SiC with low $SiO_2$, sliding wear resistance has very excellent. Monolithic SiC $1800^{\circ}C$ sintering temperatures and 3wt% have excellent wear resistance.

추진장약 수락시험시 포구속도 확률분포에 기준탄이 미치는 영향

박성호,김재훈,Park, Sung-Ho,Kim, Jae-Hoon 한국군사과학기술학회 2014 한국군사과학기술학회지 Vol.17 No.2

The purpose of this paper is to investigate the effects of calibration rounds on the statistical distribution of the muzzle velocity in acceptance test of propelling charge. It is shown that the normal distribution fits best among statistical distributions from goodness-of fit test. The 3p-Weibull distribution is also acceptable because the shape of the probability density function curve is similar to that of normal distribution and it also has near zero skewness value. Muzzle velocities of test rounds uncompensated by calibration rounds showed high variation and had comparatively higher skewness. Because the skewness of normal distribution is defined to be zero, calibration rounds make the normality of data higher.

$M{\ddot{o}}ssbauer$ 선원용 콜리메이터 설계 및 제작

박성호,김종경,Park, Sung-Ho,Kim, Jong-Kyung 대한방사선방어학회 2003 방사선방어학회지 Vol.28 No.3

컴프턴 산란 실험을 수행하기 위해 $M{\ddot{o}}ssbauer$ 선원용 콜리메이터를 제작하였다. 콜리메이터 제작에 앞서 방사선량 평가를 위해 조사선량을 계산하였고, 동일 위치에서 GM 계측기를 이용해 측정을 수행하였다. 계산 및 실험결과는 잘 일치하였다. 10 cm에서의 조사선량률이 2 mR/h 정도이므로 SUS303을 사용하여 콜리메이터를 제작하였다. 콜리메이터의 35 mm, 65 mm Hole에서 방출되는 방사선을 4' 감마카메라를 사용해 측정하여 감마카메라 위치에서 2차원 방사선 영상을 얻을 수 있었다. 감마카메라 위치에서 콜리메이터의 집속 크기는 각각 8.0 mm, 5.8 mm로 측정되었다. Collimator for $M{\ddot{o}}ssbauer$ source was manufactured for compton scattering experiment. Exposure dose rate was calculated and measured using GM counter for radiation evaluation. These results were well agreed to each other and used for collimator design. SUS303 was used for collimator material because exposure dose rate at 10 cm is about 2 mR/h. The radiation emited from the 35 mm, 65 mm hole was measured using gamma camera which have 4' diameter. 2-D radiation image was acquired and analyzed. The radiation size at Gamma Camera was 8.0 mm and 5.8 mm respectively.

금속염을 함침시킨 팽창흑연과 암모니아의 반응속도 연구

박성호,김성현 ( Seong Ho Park,Sung Hyun Kim ) 한국화학공학회 1996 화학공학의이론과응용 Vol.2 No.1

퍼지기반 해양 미생물 이용 수소 제조 공정의 고장유형 및 영향분석

박성호,안준건,김수현,유영돈,장대준,강성균,PARK, SUNG HO,AHN, JUNKEON,KIM, SU HYUN,YOO, YOUNG DON,CHANG, DAEJUN,KANG, SUNGKYUN 한국수소및신에너지학회 2018 한국수소 및 신에너지학회논문집 Vol.29 No.4

In this study, the failure mode and effect analysis (FMEA) of hydrogen production process by using the Thermococcus onnurineus NA1 was conducted and advanced methodology to compensate the weakness of previous FMEA methodology was applied. To bring out more quantitative and precise FMEA result for bio-hydrogen production process, fuzzy logic and potential loss cost estimated from ASPEN Capital Cost Estimator (ACCE) was introduced. Consequently, risk for releasing the flammable gases via internal leakage of steam tube which to control the operating temperature of main reactor was caution status in FMEA result without applying the fuzzification and ACCE. Moreover, probability of the steam tube plugging caused by solid property like medium was still caution status. As to apply the fuzzy logic and potential loss cost estimated from ACCE, a couple of caution status was unexpectedly upgraded to high dangerous status since the potential loss cost of steam tube for main reactor and decrease in product gases are higher than expected.

대소변불리(大小便不利)를 동반한 척추 압박골절 환자 치험 1례

박성호,박준식,송윤경,엄유식,Park, Sung-Ho,Park, Jun-Sik,Song, Yun-Kyung,Eom, Yu-Sik 척추신경추나의학회 2005 대한추나의학회지 Vol.6 No.1

In recent years, according to the increase of the osteoporosis and traffic accidents, the vertebral compression fracture patients are increased, This Study is clinical observation to the patients who be taken compression fracture of the $L1^{\sim}L2$ vertebra bodies with the symptoms of urinary disorder and ileus. She was treated by bed rest, acupuncture and moxibustion, herb medicine, physical therapy. In the observation of this case, I think that conservative treatment which involved acupuncture, moxibustion therapy and herb medicinal treatment is more effective than common nonoperative therapy.

중증 뇌손상 환자에서 고농도 산소치료법

박성호,박한준,윤승환,조준,문창택,장상근,Park, Sung-Ho,Park, Han-Jun,Youn, Seung-Hwan,Cho, Joon,Moon, Chang-Taek,Chang, Sang-Jeun 대한신경외과학회 2001 Journal of Korean neurosurgical society Vol.30 No.1

Object : The rapid and early oxygen delivery to brain tissue was a common therapeutic method in the treatment of severe head injury patients. The purpose of this study was to investigate the effect of increased fraction of inspired oxygen in early stage of severe head injury. Methods : The parameters of research were CSF(cerebral spinal fluid) oxygen pressure($PcsfO_2$), lactate, pH, temperature, and CSF carbon dioxide pressure($PcsfCO_2$). We selected 28 patients with head trauma whose the Glasgow Coma Scale(GCS) score was less than 8 point at admission. All patients were mechanically ventilated and monitored with the commercial ICP monitoring device. Each of parameters was compared as increased fraction of inspired oxygen. In experimental cohort of 14 patients, the mean $PcsfO_2$ level was increased to $314.93{\pm}259.15mmHg$ by raising the $FiO_2$ from 40% to 100% for nine hours(p<0.05). And the mean CSF lactate level was decreased to $2.96{\pm}1.98mmol/L$ on 100% $FiO_2$ as compared with $5.98{\pm}3.25mmol/L$ on 40% $FiO_2$ in control group(p<0.05). The only above two parameters were showed statistically meaningful outcome. Conclusions : Although this study was performed in small cohort and short period, these results supports that increased inspired oxygen therapy in severe head injuried patients was recommended as a modality of treatment in future through the continuous survey.

비균일 열전도성 반응블럭의 반응특성 연구

박성호,윤여일,김성현 ( Seong Ho Park,Yea Il Yoon,Sung Hyun Kim ) 한국공업화학회 1997 공업화학 Vol.8 No.5

암모니아와 금속염과의 기-고 반응을 이용한 화학열펌프에서 열전달 특성과 물질전달 특성을 개선하기 위하여 금속염을 팽창흑연에 반지름 방향으로 겉보기 밀도가 증가하도록 함침시켜 새로운 비균일 열전도성 반응블럭을 제조하였다. 이것은 겉보기 밀도가 반지름 방향으로 165, 222, 279, 337, 394(kg/m³)로 증가하도록 만든 것으로 균일 열전도성 반응블럭과 반응특성을 비교하였다. 실험결과 열전달특성은 비균일 열전도성 반응블럭이 훨씬 좋았고, 반응을 반복함에 따라 물질전달과 반응특성이 개선되었으며 반응의 재현성도 양호함을 알 수 있었다. The nonuniform thermal conductive reaction blocks were manufactured by impregnation of metal salts on the expanded graphite to improve the heat and mass transfer ability of reaction block for the chemical heat pump using the reaction of ammonia and metal salts(halide). The nonuniform blocks were designated to increase apparent density, like 165, 222, 279, 337, 394 kg/m³ radially. The experimental results showed that the heat transfer characteristics of nonuniform blocks were better than uniform blocks. As the reaction of ammonia repeated, the volumetric expansion in the reaction block makes the mass transfer improve, and the reproducibility better.