http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
액상-환원법으로 합성된 Cu 분말의 특성에 미치는 분산제의 영향
김용이,김태완,박홍채,윤석영,Kim, Yong-Yee,Kim, Tea-Wan,Park, Hong-Chae,Yoon, Seog-Young 한국재료학회 2007 한국재료학회지 Vol.17 No.1
Ultra-fine Copper powder for a conductive paste in electric-electronic field have been synthesized by chemical reduction of aqueous $CuSO_4$ with hydrazine hydrate $(N_2H_4{\cdot}H_2O)$ as a reductor. The effect of reaction conditions such as dispersant and reaction temperature on the particle size and shape for the prepared Cu powders was investigated by means of XRD, SEM, TEM and TGA. Experiments showed that type of dispersant and reaction temperature were affected on the particle size and morphology of the copper powder. When the carboxymethyl cellulose (CMC) was added as a dispersant the relative mono-dispersed and spherical Cu powder was obtained. Cu powders with particle size of approximately 140nm and narrow particle size distribution were obtained from 0.3M $CuSO_4$ with adding of 0.03M CMC and 40ml $N_2H_4{\cdot}H_2O$ at a reaction temperature of $70^{\circ}C$.
김기선,손형민,김영민,탁철곤,박상석,임상경,하정석,정민정,이연정,Kim, Ki-Sun,Son, Hung-Min,Kim, Young-Min,Tak, Chul-Gon,Park, Sang-Seog,Lim, Sang-Kyung,Ha, Jeong-Seok,Jeong, Min-Jeong,Lee, Yun-Jung 대한임베디드공학회 2010 대한임베디드공학회논문지 Vol.5 No.2
색채선별기는 양질의 곡물 유통을 위해 불량곡물, 이물질을 선별하는 시스템이다. 기존의 색채 선별기는 PC기반 제어시스템으로서 비교적 고가이고 부피가 크며 현장 환경에서 기계적 충격이나 먼지등에 취약하다는 문제점을 가지고 있다. 본 논문에서는 이러한 문제점을 개선하기 위해 운영체제가 탑재된 임베디드 제어기 기반의 색채선별기를 제안한다. 색채선별기는 기본적으로 곡물의 유입량 및 속도를 조절해 주는 피터부, 곡물의 영상을 받아 이미지를 처리해 주는 카메라부, 카메라부에서 받은 정보를 이용해 양품과 불량품을 분리해 주는 이젝터부로 구성된다. 본 논문에서는 개발된 지능형 색채선별기용 ARM 프로세서 기반 임베디드 제어기의 하드웨어 구성, 피더부, 카메라부, 이젝터부 간의 통신프로토콜을 이용한 총괄관리 제어와 그래픽 사용자 인터페이스(GUI)를 소개한다.
폐쇄성 수면 무호흡이 Soluble Intercellular Adhesion Molecule-1과 Vascular Endothelial Growth Factor에 미치는 영향
김정표 ( Jeong Pyo Kim ),이상학 ( Sang Haak Lee ),권순석 ( Soon Seog Kwon ),김영균 ( Young Kyoon Kim ),김관형 ( Kwan Hyoung Kim ),송정섭 ( Jeong Sup Song ),박성학 ( Sung Hak Park ),문화식 ( Hwa Sik Moon ) 대한결핵 및 호흡기학회 2004 Tuberculosis and Respiratory Diseases Vol.56 No.4
비소세포폐암과 염증성 폐질환에서 가래와 혈액 및 조직에서 p16<sup>INK4a</sup> Promoter 과메틸화
김정표,김경미,권순석,김영균,김관형,문화식,송정섭,박성학,안중현,Kim, Jeong Pyo,Kim, Kyong Mee,Kwon, Soon Seog,Kim, Young Kyoon,Kim, Kwan Hyoung,Moon, Hwa Sik,Song, Jeong Sup,Park, Sung Hak,Ahn, Joong Hyun 대한결핵및호흡기학회 2006 Tuberculosis and Respiratory Diseases Vol.60 No.2
연구배경 : 종양억제유전자인 $p16^{INK4a}$는 promoter region의 과메틸화로 인해 비소세포폐암의 발생에 관여하는 것으로 잘 알려져 있지만 폐암의 진단 방법으로 사용할 수 있는지는 아직까지 명확하지 않다. 이에 저자들은 비소세포폐암과 염증성 폐질환 환자의 가래와 혈액 및 조직에서 $p16^{INK4a}$ 메틸화의 발현 정도와 발현 일치 정도를 알아보고자 하였다. 방 법 : 폐종양을 주소로 내원하여 혈액, 가래 및 조직 검사를 시행한 후 최종적으로 비소세포폐암(18명)과 염증성 폐질환(5명) 진단을 받은 23명을 대상으로 하였다. 각 표본에서 DNA를 추출한 후 메틸화 특이성 중합효소연쇄반응법을 이용하여 $p16^{INK4a}$ promoter region의 메틸화 양상을 비교 분석하였다. 결 과 : 혈액에서는 비소세포폐암 그룹(88.9%, 18명중 16명)이 염증성 폐질환 그룹(20.0%, 5명중 1명)보다 $p16^{INK4a}$ 메틸화 발현이 증가하였으며(P=0.008), 가래에서는 비소세포폐암 그룹(12명중 10명)과 염증성 폐질환 그룹(5명중 4명)의 발현 차이는 없었다(P=1.00). 조직은 비소세포폐암 그룹에서 8명중 6명(75.0%)이 $p16^{INK4a}$ 메틸화가 나타났다. 혈액, 가래 및 조직에서 $p16^{INK4a}$ 메틸화의 발현 일치율은 7명 중 4명이 일치한 57.1%를 보였다. 결 론 : 비소세포폐암 그룹에서 염증성 폐질환 그룹보다 혈액의 $p16^{INK4a}$ 메틸화가 증가하였고 조직과의 일치율도 높았다. 따라서 폐암이 의심되는 고 위험 인자가 있는 환자에서 혈액의$p16^{INK4a}$ 과메틸화는 비소세포폐암과 염증성 폐질환을 감별하는데 유용하게 사용될 수 있을 것으로 생각한다. Background : The aberrant promoter hypermethylation of p16INK4a, as a tumor suppressor gene, is contributory factor to non-small cell lung cancer(NSCLC). However, its potential diagnostic impact of lung cancer is unclear. This study measured the level of $p16^{INK4a}$ promoter hypermethylation in the sputum and blood, and compared this with the level measured in the tissue obtained from NSCLC and pulmonary inflammation. Methods : Of the patients who visited the Our Lady of Mercy Hospital in Incheon, Korea for an evaluation of a lung mass and underwent blood, sputum, and tissue tests, 23patients (18 NSCLC, 5 pulmonary inflammation) were enrolled in this study. DNA was extracted from each sample and the level of p16INK4amethylation was determined using methylation-specific polymerase chain reaction. Results : $p16^{INK4a}$ methylation of the blood was observed in 88.9% (16 of 18) and 20.0% (1 of 5) of NSCLC and from pulmonary inflammation samples, respectively (P=0.008). Methylation of the sputum was observed in 83.3% (10 of 12) 80.0% (4 of 5) of NSCLC and pulmonary inflammation samples, respectively (P=1.00). Among the 8 NSCLC tissue samples, methylation changes were detected in 75.0% of samples (6 cases). Four out of seven tissue samples (57.1%) showed concordance, being methylated in both the blood and sputum. Conclusions : There was a higher level of $p16^{INK4a}$ methylation of the blood from NSCLC patients than from pulmonary inflammation. The tissue showed a high concordance with the blood in the NSCLC samples. These findings suggest that $p16^{INK4a}$ promoter hypermethylation of the blood can used to discriminate between NSCLC and pulmonary inflammation.
비소세포폐암과 염증성 폐질환에서 가래와 혈액 및 조직에서 p16(INK4a) Promoter 과메틸화
김정표 ( Jeong Pyo Kim ),김경미 ( Kyong Mee Kim ),권순석 ( Soon Seog Kwon ),김영균 ( Young Kyoon Kim ),김관형 ( Kwan Hyoung Kim ),문화식 ( Hwa Sik Moon ),송정섭 ( Jeong Sup Song ),박성학 ( Sung Hak Park ),안중현 ( Joong Hyun Ah 대한결핵 및 호흡기학회 2006 Tuberculosis and Respiratory Diseases Vol.60 No.2
한석영(Seog-Young Han),박재용(Jae-Yong Park),김상락(Sang-Rak Kim),이원구(Won-Gu Lee),유진식(Jin-Sik Yoo),김용대(Young-Dae Kim),맹주성(Joo-Seung Maeng) 한국생산제조학회 2007 한국공작기계학회 춘계학술대회논문집 Vol.2007 No.-
An active micro-mixer, which was composed of an oscillating micro-stirrer in the microchannel to provide rapid, effective mixing at high flow, rates was analyzed. The effects of molecular diffusion and disturbance by the stirrer were considered with regard to two types of mixer models: the simple straight microchannel and microchannel with an oscillating stirrer. Two types of mixer models were studied by analyzing mixing behaviors such as their interactionafter the stirrer. The mixing was calculated by Lattice Boltzmann methods using the D2Q9 model. In this study, the time-averaged mixing index formula was used to estimate the mixing performance of time-dependent flow. The mixing indices of the two models compared. From the results, it was found that the mixer with an oscillating stirrer was much more enhanced and stabilized. Therefore, an optimum design for a dynamic micro-mixer with an oscillating stirrer was performed using Taguchi method in order to obtain a robust solution. The design parameters were established as the frequency, the length and the angle of the stirrer and the optimal values were determined to be 2, 0.8D and ± 75°, respectively. It was found that the mixing index of the optimal design increased 80.72% compared with that of the original design.