들깨잎의 揮發性 香氣成分에 關한 硏究

姜興順,林順英,南昌祐,尹錫權,邊時明 同德女子大學校 1995 同大論叢 Vol.25 No.1

To investigate the volatile flavor components of perilla leaves, analyses of kinds of cultivar by GC, GC/MS, UV, IR and NMR were carried out. The results obtained were summarized as follows : 1. The essential oils were extracted with diethyl ether after steam disillation. 2. The identified volatiles include 10 hydrocarbones, 6 alcohols, 3 aldehydes, 2 ketones and 1 miscellaneous components. 3. The major volatile component perilla ketone was identified by UV, IR and NMR spectrum. 4. The perilla ketone were identified in Suwon 8, 19, 21, 23, 24, 25, 26 and purpurea while perillaldehyde was identified in purpurea only.

고속 머시닝센터의 성능평가 기술에 관한 연구

강익수,강명창,김정석,김기태 한국공작기계학회 2004 한국공작기계학회 추계학술대회논문집 Vol.2004 No.-

The high speed machining center(HMC) has been widely applied to manufacture a die and machine elements product in industrial field. Because the evaluation for HMC is not sufficiently performed, ineffective machining is occasionally conducted in machining industry. In this study, the dynamic characteristics of newly developed machining center is evaluated under running condition and the machinability is investigated experimentally. Also, the in-process measuring instrument which can measure the tool wear on the machine were developed by using the CCD and exclusive jig and calibration instrument for tool wear measurement.

건설감리업무에 대한 비교분석

강명숙,심재한,조영상 漢陽大學校 工學技術硏究所 2002 工學技術論文集 Vol.11 No.-

Recently we emphasize the role of construction work's supervision, which is rasing its head, for the protection of an insolvent construction and the ensurance of quality control in the lesson of the big accident of Sampung Department Store and Chonjuuam center. Government has been carrying out the Responsible Construction System to get rid of an insolvent construction at a construction site since January 1 in 1994. But it is urgent to revise systematically for early fixing of supervision system and related system according to the construction market on August in 1995. In the case of Korea, depending on making a construction we didn't experience a supervision. We must grope the revision of its system and the access to the international level. We have to reflex and revise is operation system which pass current with overseas construction market. We must diminish confusion and an unnecessary friction with over seas companies which take part in domestic construction works. Ultimately, We have improve techniques of domestic supervisor and expert supervision companies. It will contribute to the turning for the advanced system. Accrodingly I will try for early fixing of special supervision system in Korea. For this I analyzed the construction supervision system to solve. We come to the conclusion by analyzing several countries construction system USA, ENGLAND, JAPAN ect.

초고속 통신망에서 비디오의 주관적 품질 평가에 관한 연구

강명화,강진석,최연성,김장형 濟州大學校 産業技術硏究所 2001 산업기술연구소논문집 Vol.12 No.1

According to information communication business faces with competitions in a various spheres with the development of multimedia and information communication. the time when we have to make an effort to improve a quality comes from an era when we devote ourselves to quantitative expansion. we will try to perform quality assessments of real-time interactive multimedia service. and so on - in this research and present criteria of new subjective quality assessments which is fit on Korea by analyzing examples of ITU-T and foreign countries and Korea.

Flowable 및 microfill 복합레진으로 충전된 제 5급와동에서 load cycling 전,후의 미세변연누출 비교

강석호,김오영,오명환,조병훈,엄정문,권혁춘,손호현 大韓齒科保存學會 2002 Restorative Dentistry & Endodontics Vol.27 No.2

Low-viscosity composite resins may produce better sealed margins than stiffer compositions (KempScholte and Davidson, 1988; Crim, 1989). Flowable composites have been recommended for use in Class V cavities but it is also controversial because of its high rates of shrinkage. On the other hand, in the study comparing elastic moduli and leakage, the microfil had the least leakage (Rundle et al. 1997). Furthermore, in the 1996 survey of the Reality Editorial Team, microfills were the clear choice for abfraction lesions. The purpose of this study was to evaluate the microleakage of 6 composite resins (2 hybrids, 2 microfills, and 2 flowable composites) with and without load cycling. Notch-shaped Class V cavities were prepared on buccal surface of 180 extracted human upper premolars on cementum margin. The teeth were randomly divided into non-load cycling group (group 1) and load cycling group(group 2) of 90 teeth each. The experimental teeth of each group were randomly divided into 6 subgroups of 15 samples. All preparations were etched, and Single bond was applied. Preparations were restored with the following materials (n=15) : hybrid composite resin [Z250(3M Dental Products Inc. St.Paul, USA), Denfil(Vericom, Ahnyang, Korea)], microfil [Heliomolar RO(Vivadent, Schaan, Liechtenstein), Micronew(Bisco Inc. Schaumburg, IL, USA)], and flowable composite[AeliteFlo(Bisco Inc. Schaumburg, IL, USA), Revolution(Kerr Corp. Orange, CA, USA)]. Teeth of group 2 were subjected to occlusal load (100N for 50,000 cycles) using chewing simulator(MTS 858 Mini Bionix Ⅱ system, MTS Systems Corp., Minn, USA). All samples were coated with nail polish 1mm short of the restoration, placed in 2% methylene blue for 24 hours, and sectioned with a diamond wheel. Enamel and dentin/cementum margins were analyzed for microleakage on a sclale of 0 (no leakage) to 3 (3/3 of wall). Results were statistically analyzed by Kruskal-Wallis One way analysis, Mann-Whitney U-test, and Student-Newmann-Keuls method. (p=0.05) Results: 1. There was significantly less microleage in enamel margins than dentinal margins of all groups. (p<0.05) 2. There was no significant difference between six composite resin in enamel margin of group 1. 3. In dentin margin of group 1, flowable composite had more microleakage than others but not of significant differences. 4. There was no significant difference between six composite resin in enamel margin of group 2. 5. In dentin margin of group 2, the microleakage were R>A=H=M>D>Z. But there was no significant differences. 6. In enamel margins, load cycling did not affect the marginal microleakage in significant degree. 7. In dentin margins, load cycling did affect the marginal microleakage only in Revolution. (p<0.05)

고속 머시닝센터의 진동특성 및 가공성 평가

강익수,강명창,김정석,김기태 한국공작기계학회 2004 한국공작기계학회 춘계학술대회논문집 Vol.2004 No.-

The high speed machining center(HMC) has been widely applied to manufacture a die and trial product in many machine industry. Because the evaluation for HMC is not sufficiently performed and the efficient cutting conditions can't be selected, a great loss has been caused in the cost aspect. In this study, the need of preliminary running time and unstable spindle speed is presented by the analysis of acceleration in idling. The Machinability for the TiAIN coated flat end mill and STD11(H_(R)C60) is evaluated from the trends of tool wear and cutting force according to cutting conditions. The resonance spindle speed is identified through the tool wear and natural frequency test.

유산양에서 발정동기화 유도와 인공수정 효율

장석민,강재구,최기명,김홍래,진동일 충남대학교 농업과학연구소 2007 농업과학연구 Vol.34 No.1

This study was conducted to evaluate the response of CIDR-S on estrus synchronization of dairy goats and the effect of artificial insemination on conception rate. Estrus synchronization of sexually matured Saanen goats was induced with insertion of CIDR-S into vagina for 15 days and injection of 500 IU PMSG before removal of CIDR-S. Artificial insemination was conducted using liquid or frozen semen by intra-cervical insemination with synchronized does. Estrus synchronization was 90% using CIDR-S insertion for 15 days. Conception rate of inseminated does was 20% - 25%, while that of natural mated does was 100%. These results suggested that synchronization of dairy goats can be successfully induced and artificial insemination method has to be improved for the practical use in dairy goats.

삼상 순환유동층의 상승관에서 연속 액상의 축방향 혼합특성

유명선,손성모,강석환,강용,김상돈 한국공업화학회 2004 공업화학 Vol.15 No.1

직경이 0.102 m이고 높이가 3.5 m인 기체-액체-고체 순환 유동층의 상승관에서 액상의 축방향 혼합특성을 고찰하였다. 기체유속(0.01~0.07 ㎧), 액체유속(0.25~0.31 ㎧) 그리고 고체순환속도(2~8 ㎏/㎡s)를 실험변수로 선정하였으며 이들 변수들이 액상의 축방향 분산계수에 미치는 영향을 고찰하였다. 축방향의 추적자 농도분포로부터 분산모델을 사용하여 액상의 축방향 분산계수를 구하였다. 액상의 축방향 분산계수는 기체유속과 고체순환속도가 증가함에 따라서 증가하였으나 액체의 유속의 증가에 따라서는 약간 감소하였다. 또한, 액상의 축방향 분산계수는 등방성 난류 모델을 적용한 무차원군으로 표현되는 상관식으로 나타낼 수 있었다. Characteristics of liquid dispersion in the axial direction were investigated in the riser of a three-phase circulating fluidized bed whose diameter is 0.102 m and 3.5 m in height. Effects of gas (0.01-0.07 m/sl and liquid (0.25-0.31./s) velocities and the circulation rate of solids (2∼8 kg/m^(2)s) on the dispersion coefficient of the continuous liquid phase in the axial direction were determined. A dispersion model was employed to obtain the axial dispersion coefficient of the liquid phase from the radial concentration profiles of tracer with variations of axial position. The axial dispersion coefficient of the liquid phase increased with increasing gas velocity or solid circulation rate, however, decreased slightly with increasing liquid velocity in the riser bed. The axial dispersion coefficient of the liquid phase was well correlated in terms of dimensionless groups based on the isotropic turbulence theory.

조기유자망 어구의 개량 및 생력화 조업시스템 개발 : 3. 생력형 5단 양망기의 해상 성능 시험

김석종,구명성,강경범,서대범,정용진 제주대학교 해양과환경연구소 2005 해양과환경연구소 연구논문집 Vol.29 No.2

인접한 고층건물의 豊荷重 상호간섭에 관한 연구

조강표,정진택,정명채,김윤석 대한건축학회 2003 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.23 No.2(구조계)

Wind load is evaluated based on Standard Design Loads for Building of AIK(Architectural Institute of Korea), which was obtained from wind-tunnel experiment for an isolated building in open country, actual wind load can be different from the code because of terrain, building geometry, wind direction, separation distance between the buildings. Among them. separation distance is the most important factor. This paper presents the interference factor for sqaue section high-rise building structure, focusing on the separation distance. Interference factor was obtain from the force balance test in a wind tunnel.