고온가열처리에 의한 바다방석고둥 ( Omphalius pfeifferi capenteri ) 의 식품성분 변화

하진환(Jin Hwan Ha),송대진(Dae Jin Song),김풍호(Poong Ho Kim),허민수(Min Soo Heu),조문래(Moon Lae Cho),심효도(Hyo Do Sim),김혜숙(Hey Suk Kim),김진수(Jin Soo Kim) 한국수산과학회 2002 한국수산과학회지 Vol.35 No.2

바다방석고둥을 원료로 한 신제품 개발에 관한 일련의 기초 연구로 저장성 부여를 위하여 시도하는 고온가열처리 조건 (F_0 5분, F_0 10분, F_0 15분 및 F_0 20분)에 따른 바다방석고둥의 성분변화에 대하여 살펴보았다. 바다방석고둥 통조림은 살균을 5분 이상 처리하는 경우 저장 중 팽창관이 발생하지 않았고, 또한 생균수가 검출되지 않아 저장성이 있었다. 고온가열처리 정도가 증가할수록 바다방석고둥의 일반성분 중 수분함량은 감소하였고, 조단백질 함량은 증가하였으며, 조지방 및 조회분 함량은 거의 변화가 없었다. 또한 바다방석 통조림은 고온가열처리 정도가 증가할수록 이취에 관여하는 휘발성염기질소 함량, pH와 색조에 관여하는 갈변도는 증가하였고, 영양에 관여하는 구성아미노산, 무기질과 맛에 관여하는 유리아미노산, TMAO, total creatinine 및 수율 둥은 감소하였다. 이들을 색조, 조직감 및 맛에 대하여 관능검사한 결과 자숙 처리한 시료에 비하여 모든 항목에서 F_0 10분까지는 차이가 없었으나, 그 이상 가열처리한 경우 품질이 저하하였다고 인지되었다. 이상의 결과로 미루어 보아 바다방석고둥을 고온가열처리하여 신제품을 개발하고자 하는 경우 F_0 값이 10분 이상이면 바람직하지 않은 것으로 판단되었다. The top shell, Omphalius pfeifferi capenteri meat vacuum-packed in can (diameter× height, 74.1 ㎜ × 50.7 ㎜) were heated at 115℃ up to F_0 values of 5 min, 10 min, 15 min and 20 min, and the changes in food components were studied. After 14 days storage at 37℃ and 55℃, no growth of microorganism and panelling were recognized from the canned meats which were sterlized at 115℃ with F_0 value of 5 min and over. In the case of proximate composition of the canned meats, the moisture content decreased with the increase of F_0 value, while crude protein increased. The increase of volatile basic nitrogen content, pH and degree of browning and the decrease of mineral, total amino acid, free amino add, trimethylamine oxide, total creatinine contents and yields were observed during thermal processing. In sensory evaluation on color, texture and taste in the canned meats, no significant difference was observed among a boiled sample and the canned meats heated at F_0 value of 10 min and below. But, in the canned meats heated at F_0 value of over 15 min, its sensory scores decreased with the increase of F_0 value. From these results, the reasonable F_0 value for preparation of the heat-treated top shell meats was in the range of 5∼10 min.

열수 침지 처리가 치콘 절단면의 적변 억제에 미치는 영향

정현진(Hyun Jin Jung),강호민(Ho-Min Kang) 한국원예학회 2014 원예과학기술지 Vol.32 No.3

치콘의 판매 중 상품성 저하의 원인이 되는 치콘 절단면 적변 현상을 억제하기 위해 열수 침지 실험을 실시하였다. 열수침지처리로는 대조구(20℃ 1분)과 38℃에서의 4분, 8분, 42℃에서의 2분, 4분, 그리고 45℃에서의 1분, 2분을 두었다. 색차계로 측정한 △a<SUP>*</SUP>과 △h값은 42℃ 2분 처리에서는 가장 낮게 유지되었으며, 42℃의 2분과 45℃의 1분 처리구에서는 대조구보다 유의 있는 낮은 값을 나타내었다. 10℃에 저장 6일째 관능 평가한 절단면의 적변지수는 42℃의 2분과 4분 처리 그리고 45℃의 1분 처리에서 낮았다. 적변의 원인 물질이 되는 총페놀함량을 저장 6일째 조사하였는데, 이 또한 절단면의 색변화가 적었던 42℃의 2분과 4분 처리 그리고 45℃의 1분 처리에서 낮았다. 페놀물질 합성에 관여하는 PAL 활성은 42℃ 2분 처리에서는 가장 낮은 값을 보였으며, 42℃의 2분와 45℃의 1분 처리구에서는 대조구보다 유의 있는 낮은 수치를 보였다. 그러나 가장 강한 열처리였던 45℃의 2분 처리에서는 절단면의 적변이 대조구와 유사한 수준으로 진행되었으며, 페놀함량과 PAL 활성도 대조구와 차이가 없었다. 공기에 노출된 절단조직에서 페놀물질을 산화시켜 적변을 일으키는 PPO의 활성은 42℃와 45℃의 모든 처리구에서 낮았는데, 특히 다른 조사항목에서는 모두 대조구와 유사한 수준을 보였던 45℃의 2분 처리구가 가장 낮은 수치를 보였다. 또한 각 조사항목간 상관관계에서, PPO를 제외한 모든 조사항목간에서는 대부분 고도의 상관관계를 보였으며, 특히 관능평가한 적변지수와 △h값은 r = 0.927<SUP>***</SUP>를, PAL 활성과 총 페놀물질 함량과는 r = 0.942<SUP>***</SUP>의 고도의 상관관계를 보였다. Hot water dipping test was conducted for chicon to restrict red discoloration of its basal part which impairs the product value during sales. Hot water dipping treatment was given to chicon for 4 min and for 8 min at 38℃ and for 2 min and 4 min at 42℃, and for 1 min and 2 min at 45℃, along with control (for one min at 20℃). The red discoloration indices of basal part of chicon during sensory evaluation on the sixth day of storage under the storage temperature at 10℃ was lower at 42℃ for 2 min, 42℃ for 4 min and 45℃ for 1 min treatments. The color change value of the basal part in chicon measured by colorimeter showed that the lowest △a<SUP>*</SUP> and △h were maintained in the basal part of chicon treated at 42℃ for 2 min. Whereas, color changes in 42℃ for 2 min and 45℃ for 1 min treatments were significantly low as compared with that of control. The contents of total phenolic compounds which are the substances that cause red discoloration of basal part in chicon were lowest at 42℃ for 2 min, 42℃ for 4 min and 45℃ for 1 min treatments. The activity of phenylalanine ammonia lyase (PAL) resposible for in the synthesis of phenolic substances was the least in 42℃ for 2 min treatment. Whereas, PAL activity of the chicons treated a t 42℃ for 2 min and at 4 5℃ for 1 min were significantly lower than t hat of c ontrol. However, r ed d iscoloration was progressed as similar level with that of control in the basal part of chicon at 45℃ for 2 min. The contents of total phenolic compounds and PAL activity in this treatment were not significantly different from those in control. The polyphenol oxidase (PPO) activity which causes red discoloration of cut tissues was low in all the treatments including 42℃ and 45℃ treatment at which no inhibition effects of the red discoloration of basal part of chicon were observed. When the correlation coefficient between each investigated index was tested, most of them showed high correlation except the PPO activity and particularly and the red discoloration index and sensory evaluation △h values, and PAL activity and total phenolic compounds content were r = 0.927<SUP>**</SUP>, and r = 0.942<SUP>**</SUP>, respectively.

과열증기처리 반탄화 추출물의 항산화 효과 검증에 관한 연구

오근혜(Geun Hye Oh),남정빈(Jeong Bin Nam),양승민(Seung Min Yang),정원희(Won Hee Joung),정진산(Jin San Jeong),신종민(Jong Min Shin),강석구(Seog Goo Kang) 한국펄프·종이공학회 2018 펄프.종이기술 Vol.50 No.2

The antioxidant properties of the extracts from torrefied wood subjected to superheated steam treatment were investigated. Total polyphenolics, total flavonoids, DPPH (2,2-diphenyl-1-picrylhydrazyl) free radical scavenging activity, reducing power, and FRAP (Ferric reducing antioxidant power) were determined to evaluate antioxidant activity. The total polyphenol content was 879.67±40.41 ㎎/mL at a concentration of 25 g/mL when the extract was subjected to a temperature of 300℃ for 10 min, and 759.67±25.17 ㎎/mL at a concentration of 25 g/mL at 350℃ for 10 min. The value of at 300℃ was 15.79% higher than that obtained at 350℃. Total flavonoid content was 111.18±3.55 ㎎/mL at a concentration of 25 g/mL at 300℃ for 10 min, and 80.58±2.58 ㎎/mL at a concentration of 25 g/mL at 350℃ for 10 min. The value at 300℃ was 37.97% higher than that obtained at 350℃. For the DPPH free radical scavenging activity, the highest scavenging activity was observed at a concentration of 6 g/mL. DPPH free radical scavenging activity at a concentration of 6 g/mL at 300℃ for 10 min was 89.83±0.03%, whereas at 350℃ for 10 min at the same concentration, it was found to be 87.99±0.1%. The value at 300℃ was 2.09% higher than that obtained at 350℃. Reducing power was determined to be 3.59±0.04 at a concentration of 25 g/mL at 300℃ for 10 min, and 2.92±0.1 at a concentration of 25 g/mL at 350℃ for 10 min. The value at 300℃ was 22.94% higher than that obtained at 350℃. FRAP was 1742±37 μM at a concentration of 25 g/mL at 300℃ for 10 min, and 1106±8 μM at a at 350℃ for 10 min. At 300℃, the FRAP value was 57.50% higher than that obtained at 350℃. Based on these results, we suggest that torrefied wood treated with superheated steam can be used in various applications because of its effective antioxidant properties.

Accuracy of cardiac output measurements during off-pump coronary artery bypass grafting: according to the vessel anastomosis sites

Sung Yong Park,Dae Hee Kim,Han Bum Joe,Ji Young Yoo,Jin Soo Kim,Min Kang,Yong Woo Hong 대한마취통증의학회 2012 Korean Journal of Anesthesiology Vol.62 No.5

Background: During beating heart surgery, the accuracy of cardiac output (CO) measurement techniques may be influenced by several factors. This study was conducted to analyze the clinical agreement among stat CO mode (SCO), continuous CO mode (CCO), arterial pressure waveform-based CO estimation (APCO), and transesophageal Doppler ultrasound technique (UCCO) according to the vessel anastomosis sites. Methods: This study was prospectively performed in 25 patients who would be undergoing elective OPCAB. Hemodynamic variables were recorded at the following time points: during left anterior descending (LAD) anastomosis at 1 min and 5 min; during obtuse marginal (OM) anastomosis at 1 min and 5 min: and during right coronary artery (RCA) anastomosis at 1 min and 5 min. The variables measured including the SCO, CCO, APCO, and UCCO. Results: CO measurement techniques showed different correlations according to vessel anastomosis site. However, the percent error observed was higher than the value of 30% postulated by the criteria of Critchley and Critchley during all study periods for all CO measurement techniques. Conclusions: In the beating heart procedure, SCO, CCO and APCO showed different correlations according to the vessel anastomosis sites and did not agree with UCCO. CO values from the various measurement techniques should be interpreted with caution during OPCAB. Background: During beating heart surgery, the accuracy of cardiac output (CO) measurement techniques may be influenced by several factors. This study was conducted to analyze the clinical agreement among stat CO mode (SCO), continuous CO mode (CCO), arterial pressure waveform-based CO estimation (APCO), and transesophageal Doppler ultrasound technique (UCCO) according to the vessel anastomosis sites. Methods: This study was prospectively performed in 25 patients who would be undergoing elective OPCAB. Hemodynamic variables were recorded at the following time points: during left anterior descending (LAD) anastomosis at 1 min and 5 min; during obtuse marginal (OM) anastomosis at 1 min and 5 min: and during right coronary artery (RCA) anastomosis at 1 min and 5 min. The variables measured including the SCO, CCO, APCO, and UCCO. Results: CO measurement techniques showed different correlations according to vessel anastomosis site. However, the percent error observed was higher than the value of 30% postulated by the criteria of Critchley and Critchley during all study periods for all CO measurement techniques. Conclusions: In the beating heart procedure, SCO, CCO and APCO showed different correlations according to the vessel anastomosis sites and did not agree with UCCO. CO values from the various measurement techniques should be interpreted with caution during OPCAB.

알코올이 Dynamic Posturography에 미치는 영향

이진춘,고의경,장민호,이병주,백무진,노환중,왕수건,전경명 대한이비인후과학회 1999 대한이비인후과학회지 두경부외과학 Vol.42 No.2

Effect of Jaeumkanghwatang (JEKHT), a Polyherbal Formula on the Pharmacokinetics Profiles of Tamoxifen in Male SD Rats (1)

Min A Kwak,Soo Jin Park,Sung Hwan Park,Young Joon Lee,Sae Kwang Ku 대한한의학회 2016 대한한의학회지 Vol.37 No.2

Evolutionary dynamics of transposable elements during silkworm domestication

Min‑Jin Han,Hong‑En Xu,Xiao‑Min Xiong,Hua‑Hao Zhang 한국유전학회 2018 Genes & Genomics Vol.40 No.10

Although there are some documented examples on population dynamics of transposable elements (TEs) in model organisms, the evolutionary dynamics of TEs in domesticated species has not been systematically investigated. The objective of this study is to understand population dynamics of TEs during silkworm domestication. In this work, using transposondisplay we examined the polymorphism of seven TE families [they represent about 59% of silkworm (Bombyx mori) total TE content] in four domesticated silkworm populations and one wild silkworm population. Maximum likelihood (ML) was used to estimate selection pressure. Population differentiation and structure were performed by using AMOVA analysis and program DISTRUCT, respectively. The results of transposon-display showed that significant differentiation occurred between the domesticated silkworm and wild silkworm. These TEs have experienced expansions and fixation in the domesticated silkworm but not in wild silkworm. Furthermore, the ML results indicated that purifying selection of TEs in the domesticated silkworm were significantly weaker than that in the wild silkworm. Interestingly, an adaptation insertion induced by BmMITE-2 was found, and this insertion can reduce the polymorphism of the flanking regions of its neighboring COQ7 gene. Our results suggested that TEs expanded and were fixed in the domesticated silkworm might result from demographic effects and artificial selection during domestication. We concluded that the data presented in this study have general implication in animal and crop improvements as well as in domestication of new species.

RSM을 이용한 비규격 제주산 양식 넙치(Paralichthys olivaceus)로부터 연제품의 가공 조건 최적화

김진수 ( Jin Soo Kim ),이동호 ( Dong Ho Lee ),신준호 ( Jun Ho Shin ),전유진 ( You Jin Jeon ),김형준 ( Hyung Jun Kim ),허민수 ( Min Soo Heu ),이지선 ( Ji Sun Lee ),박권현 ( Kwon Hyun Park ) 한국수산과학회(구 한국수산학회) 2011 한국수산과학회지 Vol.44 No.5

This study was conducted to optimize the processing of high quality surimi gel from unmarketable cultured bastard halibut Paralichthys olivaceus. According to endogenous enzyme activity and processing optimization, high quality surimi gel from unmarketable cultured bastard halibut was prepared by mixing 3.0% (w/w) salt, 2.4% (w/w) starch, 5.0% (w/w) egg white and 4.8% (w/w) ice water in a Stephan mixer, set at 5˚C for 24 h, followed by boiling for 30 min, and finally cooling for 30 min. The strength of the surimi gel from unmarketable cultured bastard halibut prepared by the above processing method was 1,257 g×cm, which was 33% higher than that of a commercial surimi gel from Alaska pollock, grade SA.

Controlled post-sulfurization process for higher efficiency nontoxic solution-deposited CuIn_0.7Ga_0.3Se₂ absorber thin films with graded bandgaps

Jang, Jin Woo,Lee, Seung Min,Choi, Ik Jin,Cho, Yong Soo ELSEVIER SCIENCE 2017 JOURNAL OF ALLOYS AND COMPOUNDS Vol.710 No.-

<P><B>Abstract</B></P> <P>A practical way of adjusting post-sulfurization process with variable durations is proposed to improve the cell-conversion efficiency of non-toxic solution driven CuIn<SUB>0.7</SUB>Ga<SUB>0.3</SUB>Se<SUB>2</SUB> absorber thin films. The degree of bandgap grading was controllable by changing the sulfurization time from 2 min to 30 min due to the dissimilar distribution of sulfur across the absorber layer. Deeper intensified distributions of Ga and S were responsible for enhancements in the open-circuit voltage and cell-conversion efficiency. A competitive efficiency of ∼8.81% for the 10 min-sulfurized CIGSSe cell was achieved with other promising parameters, i.e., short-circuit current density of 33.17 mA/cm<SUP>2</SUP>, open-circuit voltage of 0.496 V, and fill factor of 53.5%, resulting from the improved carrier collection and reduced recombination by the bandgap grading. This improved efficiency corresponds to a ∼15.6% enhancement compared to the unsulfurized sample.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Controlled post-sulfurization process enhances cell efficiency of CuIn<SUB>0.7</SUB>Ga<SUB>0.3</SUB>Se<SUB>2</SUB>. </LI> <LI> Sulfur penetrates easily toward the back contact with concentration gradient. </LI> <LI> A graded bandgap structure is responsible for the improved charge collection. </LI> <LI> The achieved cell efficiency of ∼8.81% corresponds to the ∼15.6% enhancement. </LI> <LI> Actual bandgap variations are projected on the basis of elemental distributions. </LI> </UL> </P>

Poly(vinylbenzyl chloride-glycidyl methacrylate)/Polyethylene Composite Anion Exchange Membranes for Vanadium Redox Battery Application

Park, Min-A,Shim, Joonmok,Park, Se-Kook,Jeon, Jae-Deok,Jin, Chang-Soo,Lee, Ki Bong,Shin, Kyoung-Hee Korean Chemical Society 2013 Bulletin of the Korean Chemical Society Vol.34 No.6

Anion exchange membranes for a vanadium redox flow battery (VRB) were prepared by pore-filling on a PE substrate with the copolymerization of vinylbenzyl chloride (VBC) and glycidyl methacrylate (GMA). The ion exchange capacity, water uptake and weight gain ratio were increased with a similar tendency up to 65% of GMA content, indicating that the monomer improved the pore-filling degree and membrane properties. The vanadium ion permeability and open-circuit voltage were also investigated. The permeability of the VG65 membrane was only $1.23{\times}10^{-7}\;cm^2\;min^{-1}$ compared to $17.9{\times}10^{-7}\;cm^2\;min^{-1}$ for Nafion 117 and $1.8{\times}10^{-7}\;cm^2\;min^{-1}$ for AMV. Consequently, a VRB single cell using the prepared membrane showed higher energy efficiency (over 80%) of up to 100 cycles compared to the commercial membranes, Nafion 117 (ca. 58%) and AMV (ca. 70%).