http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
탄소 중간물질 그리드를 사용한 DR system에서의 moir$\acute{e}$ artifact에 관한 연구
이성주,조효성,최성일,조희문,오지은,이소영,박연옥,이민식,Lee, Sung-Ju,Cho, Hyo-Sung,Choi, Sung-Il,Cho, Hee-Moon,Oh, Ji-Eun,Lee, So-Young,Park, Yeon-Ok,Lee, Min-Sik 한국방사선학회 2008 한국방사선학회 논문지 Vol.2 No.4
비산란 그리드는 X선 영상에서 산란방사선을 제거시키기 위해 사용되고, 그에 따라 X선 영상의 대조도를 향상 시킬 수 있다. 그러나 많은 경우 디지털 X선 영상에서는 그리드의 부적절한 샘플링으로 인해 moir$\acute{e}$ artifact를 발생 시키게 된다. 본 논문에서는 그리드 주파수, pixel pitch, 각도와 moir$\acute{e}$ artifact의 상관관계에 관하여 분석하고 실험으로 확인하였다. 실험을 위하여 4..0 - 8.5 까지의 6가지 탄소 그리드를 사용하여 $139{\mu}m{\times}139{\mu}m$ pixel size의 DDR system에서 실험을 하였다. 본 실험을 통하여 획득한 moir$\acute{e}$ artifact의 frequency는 이론적 계산값과 거의 같았고, 특히 그리드와 detector array의 각도에 따라 moir$\acute{e}$ frequency가 달라지는 것을 확인 할 수 있었다. 본 연구를 통한 moir$\acute{e}$ artifact에 대한 이론과 data는 향후 DR system에서 moir$\acute{e}$ artifact 제거에 큰 도움을 주리라 생각한다. Antiscatter grids are widely used in radiography to remove scattered X-rays and thus improve the image contrast. However, the use of grids makes moir$\acute{e}$ artifact in the digital image, and this can be a critical reason for a mistaken diagnosis. In this paper, we examined that moire artifacts are how to relate with grid frequency, pixel pitch and grid rotation angle. To experiment we prepared 6 grids having different line frequencies (4.0 to 8.5lines/mm) and tested with a DR imager having a $139{\mu}m{\times}139{\mu}m$ pixel size. In the result of this experiment, we could get data about moir$\acute{e}$ artifact that could be make solution to remove the line artifact for the successful use of the grid in digital radiography. The acquired data and theory through this experiment, are expected to make contribution to the elimination of moir$\acute{e}$ artifact in the DR system.
몬테카를로 영상모의실험 코드를 이용한 Gd$_2$O$_2$S(Tb) 섬광체 및 광센서 어레이 기반 디지털 X-선 영상시스템의 화질평가
정만희,정인범,박주희,오지은,조효성,한봉수,김신,이봉수,김호경,Jung, Man-Hee,Jung, In-Bum,Park, Ju-Hee,Oh, Ji-Eun,Cho, Hyo-Sung,Han, Bong-Soo,Kim, Sin,Lee, Bong-Soo,Kim, Ho-Kyung 대한의용생체공학회 2004 의공학회지 Vol.25 No.4
in this study, we developed a Monte Carlo imaging simulation code written by the visual C$\^$++/ programing language for design optimization of a digital X-ray imaging system. As a digital X-ray imaging system, we considered a Gd$_2$O$_2$S(Tb) scintillator and a photosensor array, and included a 2D parallel grid to simulate general test renditions. The interactions between X-ray beams and the system structure, the behavior of lights generated in the scintillator, and their collection in the photosensor array were simulated by using the Monte Carlo method. The scintillator thickness and the photosensor array pitch were assumed to 66$\mu\textrm{m}$ and 48$\mu\textrm{m}$, respertively, and the pixel format was set to 256 x 256. Using the code, we obtained X-ray images under various simulation conditions, and evaluated their image qualities through the calculations of SNR (signal-to-noise ratio), MTF (modulation transfer function), NPS (noise power spectrum), DQE (detective quantum efficiency). The image simulation code developed in this study can be applied effectively for a variety of digital X-ray imaging systems for their design optimization on various design parameters. 본 연구에서는 디지털 X-선 영상시스템의 최적화 설계를 위하여 몬테카를로 방법을 이용한 영상모의실험용 코드를 visual $C^{++}$ 프로그래밍 언어를 사용하여 개발하였다. 디지털 X-선 영상시스템으로 Gd$_2$O$_2$S(Tb) 섬광체 및 광센서 어레이를 고려하였으며, 일반적인 실험 환경을 모사하기 위해 2차원 평행 그리드를 포함시켰다. X-선과 피사체, 그리드 및 섬광체와의 반응, 그리고 섬광체에서 발생된 빛의 거동 및 광센서 어레이에서의 수집을 몬테카를로 방법을 이용하여 모사하였다. Gd$_2$O$_2$S(Tb) 섬광체의 두께는 66$\mu\textrm{m}$로 설정하였으며, 광센서 어레이의 픽셀 피치는 48$\mu\textrm{m}$ 그리고 픽셀의 포맷은 256${\times}$256으로 가정하였다. 다양한 모의실험조건에서 X-선 영상을 획득한 후 객관적인 영상시스템의 성능평가 지표인 SNR(signal-to-noise ratio), MTF(modulation transfer function), NPS(noise power spectrum), DQE(detective quantum efficiency) 등을 계산하였으며, 이를 통해 화질을 평가하였다. 본 연구에서 개발된 영상모의실험 코드는 다양한 디지털 X-선 영상시스템에 대해 여러 설계변수들에 대한 성능을 예측함으로써 영상시스템 최적설계에 활용될 수 있다.
갑상선 내부피폭선량 측정치 보정을 위한 몬테카를로 모의실험 코드(CALEFF) 개발 및 검출효율 계산
안기수(Ki Soo Ahn),조효성(Hyo Sung Cho) 대한방사선과학회(구 대한방사선기술학회) 2005 방사선기술과학 Vol.28 No.2
1999년 개정된 국내 원자력법 시행령 제2조 5항에 의하면 2003년부터 원전 작업종사자들에 대해 외부 피폭 선량뿐만 아니라 내부피폭 선량도 합산하여 평가하도록 하였으며 또한 각 선량평가에 대한 오차도 50% 이내로 유지되어야 한다고 규정한 바 있어 전신이나 갑상선 계측기와 같은 내부피폭선량 측정 장비의 정밀한 계측이 요구되고 있다. 이러한 국내 원자력법의 개정에 부합하여 본 연구에서는 내부피폭 선량측정 결과치의 정확도를 향상시키기 위해서 현재 개발 중인 갑상선 내부피폭선량 측정 시스템의 검출효율을 계산하기 위한 몬테카를로 모의실험 코드(CALEFF)를 개발하였으며, 이 코드를 사용하여 다양한 실험조건에서 검출효율을 계산하였다. 향후 갑상선 내부피폭선량 측정 시스템의 보정인자로 사용하고자 한다. According to the Para. 5 of Art 2 of the Korean Nuclear Safety Regulations, which was revised in 1999, internal dose assessment as well as external one should be performed by law for employees at a nuclear power plant from 2003, and their estimate errors should also be within 50%. Thus, more accurate internal dosimetry becomes important. Corresponding to such regulation revision, we are developing a more accurate thyroid-uptake internal dosimetric system and have developed a Monte Carlo simulation code, the so-called CALEFF, to calculate the detection efficiency of the dosimetric system. In this paper, we calculated detection efficiencies with various test conditions by using the CALEFF code and discussed their characteristics. We may use the detection efficiency calculated by the code in calibrating the thyroid internal dose from measured data.
치료용 고에너지 전자선 계측을 위한 광섬유 방사선 센서의 제작 및 특성 분석
장경원,조동현,유욱재,이봉수,이정한,탁계래,조효성,김신,Jang, Kyoung-Won,Cho, Dong-Hyun,Yoo, Wook-Jae,Lee, Bong-Soo,Yi, Jeong-Han,Tack, Gye-Rae,Cho, Hyo-Sung,Kim, Sin 대한의용생체공학회 2006 의공학회지 Vol.27 No.6
In this study, we have fabricated a fiber-optic radiation sensor using an organic scintillator for high energy electron beam therapy. The intensities of scintillating light from a fiber-optic radiation sensor are measured with different field size, electron beam energy and monitor unit of a clinical linear accelerator. To obtain percent depth dose(PDD), the amount of scintillating light is measured at different depth of polymethylmethacrylate(PMMA) phantom. Also the intensity of Cerenkov light is measured and characterized as a function of incident angle of electron beam and a subtraction method is investigated using a background optical fiber to remove a Cerenkov light.
고 에너지 광자선 계측용 2차원 광섬유 방사선 센서의 제작 및 특성분석
장경원,조동현,신상훈,김형식,이정한,이봉수,김신,조효성,Jang, Kyoung-Won,Cho, Dong-Hyun,Shin, Sang-Hun,Kim, Hyung-Shik,Yi, Jeong-Han,Lee, Bong-Soo,Kim, Sin,Cho, Hyo-Sung 한국광학회 2007 한국광학회지 Vol.18 No.4
본 연구에서는 유기 섬광체와 플라스틱 광섬유를 이용하여 치료용 광자선의 계측을 위한 2차원 광섬유 방사선 센서를 제작하였다. 제작된 센서를 사용하여 광자선 조사야(Field size)와 에너지에 따른 선형가속기의 빔 분포도를 2차원적으로 측정하였으며 polymethylmethacrylate(PMMA)팬텀 내에서 깊이에 따른 섬광체의 광량을 측정하여 깊이선량 분포(Percent Depth Dose, PDD) 또한 2차원으로 측정하였다. 본 연구를 통하여 개발된 2차원 광섬유 방사선 센서는 고 분해능, 실시간 측정, 쉬운 보정 등 많은 장점을 가지고 있다. In this study, a two-dimensional fiber-optic radiation sensor has been developed using water-equivalent organic scintillators for photon beam therapy dosimetry. Two-dimensional photon beam distributions and percent depth doses(PDD) are measured according to the energies and field sizes of the photon beam. This sensor has many advantages such as high resolution, real-time measurement and ease of calibration over conventional radiation measurement devices.
광학 필터를 이용한 광섬유 방사선 센서의 체렌코프 빛 제거
장경원,이봉수,조동현,김형식,이정한,이정환,김신,조효성,Jang, Kyoung-Won,Lee, Bong-Soo,Cho, Dong-Hyun,Kim, Hyung-Shik,Yi, Jeong-Han,Lee, Jeong-Whan,Kim, Sin,Cho, Hyo-Sung 한국광학회 2006 한국광학회지 Vol.17 No.4
본 연구에서는 유기 섬광체와 플라스틱 광섬유를 이용하여 치료용 전자선의 계측을 위한 광섬유 방사선 센서를 제작하였다. 또한, 선형가속기에서 발생되는 고 에너지 전자선에 의해 광섬유 방사선 센서를 이용한 전자선 계측에 있어 방해요소로 존재하는 체렌코프 빛을 감법 및 광학 필터링을 이용하여 제거하였고 두 가지방법들을 비교, 분석하였다. In this study, a miniature fiber-optic radiation sensor has been developed using a water-equivalent organic scintillator for electron beam therapy dosimetry. The intensity of Cerenkov light is measured and characterized as a function of the incident angle of the electron beam from a LINAC. Also, a subtraction method using a background optical fiber without a scintillator and an optical discrimination method using optical filters are investigated to remove Cerenkov light, which could cause problems or limit the accuracy for detecting a fluorescent light signal in a fiber-optic radiation sensor.