측정방법에 따른 국내산 산양유의 체세포수 비교

이승규,김민경,이연정,정석근,오미화,김동훈,박광욱,이완규,함준상,Lee, Seung-Gyu,Kim, Min-Kyung,Lee, Yeon-Jeong,Jeong, Seok-Geun,Oh, Mi-Hwa,Kim, Dong-Hun,Park, Kwang-Wook,Lee, Wan-Kyu,Ham, Jun-Sang 한국축산식품학회 2010 한국축산식품학회지 Vol.30 No.1

산양유의 체세포수는 측정방법에 따라 많은 차이가 보고되고 있으나 국제적인 표준방법으로 pyronin Y-methyl green stain에 의한 직접현미경법이 사용되고 있다. 8개 목장 총 48개 시료를 pyronin Y-methyl green stain에 의한 직접검경법, 국립축산과학원에서 보유중인 ADAM-SCC, 충청북도 축산위생연구소에서 보유중인 Somacount 500으로 측정하여 결과를 비교하였다. Pyronin Y-methyl green stain 측정시 전체 평균은 $7.3{\times}10^5$ cells/mL인 반면 ADAMSCC와 Somacaount 500은 각각 $4.9{\times}10^5$과 $11.6{\times}10^5$ cells/mL로 나타나 과소 또는 과대평가되는 결과를 보였다. 직접현미경법과 ADAM-SCC또는 Somacaount 500과의 상관계수는 각각 0.0332 또는 0.2285로 매우 낮으며 장비간의 상관계수도 0.1552로 매우 낮게 나타났다. 산양유의 체세 포수 저감을 위해서는 측정장비의 개발이 필요하며 장비를 표준화하기 위한 표준측정법으로 pyronin Y-methyl green stain의 채택이 필요하다.

완전 도재관의 선택

이승규,Lee, Seung-Kyu 대한심미치과학회 2015 Journal of the Korean Academy of Esthetic Dentistr Vol.24 No.2

성공적싱 완전도재관 치료를 위한 요구조건은 통상적 치료와 크게 다르지 않다. 적절한 치아삭제, 임시치아, 및 정확한 최종인상이 중요하다. 그럼에도 불구하고 차별점은 본딩에 있다. 수복물 내면과 지대치 외면에 레진시멘트를 도포하는 것 이외에도 본딩 술식은 비생활치의 포스트 코어 치료에도 적용할 수 있다. 생활치 지대치는 비생활치보다 심미와 기능 면에서 성공을 거두기가 더 쉽다. 포스트 코어 본딩 술식은 비생활치 지대치의 장기 성공에 중요한 역할을 한다. 본 논문에서 완전 도재관의 성공 전략 중에서 포스트 코어 축성 및 완전 도재관 본딩에 관하여 임상적 경험을 나누고자 한다. The requirements for the successful treatment of all-ceramic restorations are not so different from the ones of conventional restorations. "The provisional restoration followed by an adequate tooth reduction" and "the accurately fitting prostheses with corresponding to final impression" can be the examples of them. Nevertheless, the one which all-ceramic restorations are distinguished from conventional restorations is the additional procedure of so called "bonding". In addition to the application of resin cement between "inner surface of restoration and outer surface of abutment", bonding technology can be also applied to the treatment process of "Post and Core" in particular if the abutments are non-vital teeth. Core build-up for all-ceramic crown is conducted with fiber post and tooth colored composite by considering the properties of the restorations transmitting light. We know well that a vital abutment is easier than a non-vital one to get the targeted goals for clinical success in connection with esthetics and structure. The creation of "Post and Core" with bonding technique is a decisive factor for a long-term success if the abutment is non-vital tooth with dentinal collapse. I would like to share my clinical experience about "post & core build-up and all-ceramic restoration bonding" out of several success strategies of all-ceramic crown with this review article.

스크린 프린팅법을 이용한 ZnGa₂O₄ 형광체 후막의 발광특성

이승규,박용서,최형욱,Lee Seung-Kyu,Park Yong-Seo,Choi Hyung-Wook 한국전기전자재료학회 2006 전기전자재료학회논문지 Vol.19 No.8

The $ZnGa_2O_4$ phosphor thick films were fabricated using a screen printing method on Si(100) substrates at various sintering temperatures. The XRD patterns show that the $ZnGa_2O_4$ thick films have a (311) main peak and a spinel structure with increasing sintering temperatures. The particle sizes of $ZnGa_2O_4$ phosphor were about 100 nm and the thickness of $ZnGa_2O_4$ thick film was $10{\mu}m$. The CL and PL properties of $ZnGa_2O_4$ showed main peak of 420nm and maximum intensity at the sintering temperature of $900^{\circ}C$. These results indicate that $ZnGa_2O_4$ phosphor thick films hold promise for displays such as plasma display panel and field emission display.

효율적인 신경망 부싱모델을 위한 신경망 구성 최적화

이승규,김광석,손정현,Lee, Seung-Kyu,Kim, Kwang-Suk,Sohn, Jeong-Hyun 한국자동차공학회 2007 한국 자동차공학회논문집 Vol.15 No.5

A bushing component of a vehicle suspension system is tested to capture the nonlinear behavior of rubber bushing element using the MTS 3-axes rubber test machine. The results of the tests are used to model the artificial neural network bushing model. The performances from the neural network model usually are dependent on the structure of the neural network. In this paper, maximum error, peak error, root mean square error, and error-to-signal ratio are employed to evaluate the performances of the neural network bushing model. A simple simulation is carried out to show the usefulness of the developed procedure.

라섹과 에피라식의 단기간 임상결과 분석

이승규,김선웅,김태임,이형근,김응권,서경률.Seung Kyu Lee. M.D.. Sun Woong Kim. M.D.. Tae Im Kim. M.D.. Hyung Kuen Lee. M.D.. Eung Kweon Kim. M.D.. Kyoung Yul Seo. M.D. 대한안과학회 2008 대한안과학회지 Vol.49 No.3

`Purpose: To compare short-term clinical results of LASEK and epi-LASIK. Methods: Fifteen subjects (30 eyes) underwent uncomplicated LASEK on one eye and uncomplicated epi- LASIK on the other eye by a single surgeon, and uncorrected visual acuity, refractive change, postoperative pain, and postoperative satisfaction were compared at postoperative week one, at one month, and at three months. Results: Postoperative uncorrected visual acuities were 0.68±0.20, 0.96±0.22, and 1.05±0.17 for LASEK and 0.75±0.21, 0.92±0.14, and 1.01±0.21 for epi-LASIK at one week, one month, and three months, respectively. Epi-LASIK showed faster improvement in visual acuity at one week, while LASEK showed faster improvement afterward. However, no statistical significance was found. Spherical equivalet of LASEK was -0.66±1.28D and that of epi-LASIK was -0.61±0.92D at postoperative week one, implying faster refractive recovery for epi-LASIK, but after one month, LASEK was faster in refractive recovery and all these changes were not statistically significant. Durations of postoperative pain were 3.13±1.25 days for LASEK and 3.02±1.32 days for epi-LASIK. Pain scores (0~10 point scale), however, were also lower for LASEK by 0.33 point, 0.57 point, and 0.45 point for postoperative day 1, 2, and 3, respectively. No statistical significance was noted in either pain duration or pain score. When asked for overall satisfaction, six subjects preferred LASIK, four subjects preferred epi-LASIK, and five subjects showed no preference. Conclusions: Both LASEK and epi-LASIK are effective for surgical correction of myopia, and no significant difference in visual recovery, refractive change or degree of postoperative pain was noted in this study.`

스트레스 없는 인상 채득

이승규,Lee, Seung Kyu 대한심미치과학회 2017 Journal of the Korean Academy of Esthetic Dentistr Vol.26 No.1

치과 임상에서 보철 과정은 1) 치아 삭제 2) 임시 수복물 제작 3) 포스트와 코어 4) 인상채득 5) 최종 보철물 합착의 순서로 진행된다. 보철 과정의 마지막이 정확한 적합과 교합 관계를 갖는 최종 보철물을 환자의 지대치의 적합시키는 과정이다. 그런데, 이 최종 보철물은 진료실에서 만들어지는 것이 아니라, 치과 기공실에서 만들어져서 약간의 시간차를 두고 진료실로 오게 된다. 진료실에서 환자의 구강 내 정보를 기공실로 전달하는 유일한 매체는 인상체이다. 그런데 이 과정에서 수 많은 오차가 발생된다. 치과 의사와 치과 기공사는 이 오차를 줄이기 위해 원인을 파악하고 정확한 보철물 제작을 위해 노력해야 한다. Prosthetics procedures in dental clinics 1) Tooth preparation 2) Temporary restoration 3) Post and core 4) Impression 5) Cementation of final prosthesis The final step in the prosthodontic procedure is the fitting of the final prosthesis to the patient's abutment with an exact fit and occlusal relationship. By the way, this final prosthesis is not made in the clinic but is made in the dental lab and comes to the clinic with some time difference. In the clinic, the only medium to deliver the patient's oral information to the dental laboratory is the impression. However, many errors occur in this process. Dentists and dental technicians should try to identify the cause and make an accurate prosthesis to reduce this error.

SSD 스토리지 시스템에서 PRAM 캐시를 이용한 데이터 중복제거 기법

이승규,김주경,김덕환,Kim, Ju-Kyeong,Lee, Seung-Kyu,Kim, Deok-Hwan 대한전자공학회 2013 전자공학회논문지 Vol.50 No.6

In the recent cloud storage environment, the amount of SSD (Solid-State Drive) replacing with the traditional hard disk drive is increasing. Management of SSD for its space efficiency has become important since SSD provides fast IO performance due to no mechanical movement whereas it has wearable characteristics and does not provide in place update. In order to manage space efficiency of SSD, data de-duplication technique is frequently used. However, this technique occurs much overhead because it consists of data chunking, hasing and hash matching operations. In this paper, we propose new data de-duplication method using PRAM cache. The proposed method uses hierarchical hash tables and LRU(Least Recently Used) for data replacement in PRAM. First hash table in DRAM is used to store hash values of data cached in the PRAM and second hash table in PRAM is used to store hash values of data in SSD storage. The method also enhance data reliability against power failure by maintaining backup of first hash table into PRAM. Experimental results show that average writing frequency and operation time of the proposed method are 44.2% and 38.8% less than those of existing data de-depulication method, respectively, when three workloads are used. 최근 클라우드 스토리지 환경에서 전통적인 스토리지장치인 하드디스크를 대체하여 SSD(Solid-State Drive)의 사용량이 증가하고 있다. SSD는 기계적인 동작이 없어 빠른 입출력 성능을 가지는 반면 덮어쓰기가 불가능한 특성을 가지고 있어 공간 효율성을 위한 관리가 중요하다. 이와 같은 마모도 특성을 갖는 SSD의 공간 효율성을 효과적으로 관리하기 위해 데이터 중복제거 기법을 이용한다. 하지만 데이터 중복제거 기법은 데이터 청킹, 해싱, 해시값 검색과정 연산을 포함하기 때문에 오버헤드가 발생하는 문제점이 있다. 본 논문에서는 SSD 스토리지 시스템에서 PRAM 캐시를 이용한 데이터 중복제거 기법을 제안한다. 제안한 방법은 DRAM의 1차 해시테이블에 PRAM에 캐싱된 데이터를 위한 해시값들을 저장하고, LRU(Least Recently Used)기법을 이용하여 관리한다. PRAM의 2차 해시테이블에는 SSD 스토리지에 저장된 데이터에 대한 해시값들을 저장하고, DRAM의 1차 해시테이블에 대한 백업을 PRAM에 유지함으로써 전원 손실등에 대비하여 신뢰성을 향상시킬 수 있다. 실험결과, 제안하는 기법은 기존의 DRAM에 모든 해시값들을 저장하여 관리하는 기법보다 SSD의 쓰기 횟수 및 연산시간을 워크로드별 평균 44.2%, 38.8%의 감소 효과를 보였다.

연소합성법에 의한 YAG:Ce 형광체의 발광 특성

이승규,최형욱,Lee, Seung-Kyu,Choi, Hyung-Wook 한국전기전자재료학회 2007 전기전자재료학회논문지 Vol.20 No.6

The Ce-doped YAG(Yttrium Aluminum Garnet, $Y_3Al_5O_{12}$) phosphor powders were synthesized by combustion method. The luminescence, formation process and structure of phosphor powders were investigated by means of XRD, SEM and PL. The XRD patterns show that YAG Phase can form through sintering at $1000^{\circ}C$ for 2 h. This temperature is much lower than that required to synthesize YAG phase via the conventional solid state reaction method. There were no intermediate Phases such as YAP(Yttrium Aluminum Perovskite, $YAlO_3$) and YAM(Yttrium Aluminum Monoclinic, $Y_4Al_2sO_9$) observed in the sintering process. The powders absorbed excitation energy in the range $410{\sim}510\;nm$. Also, the crystalline YAG:Ce showed broad emission peaks in the range $480{\sim}600\;nm$ and had maximum intensity at 528 nm.

급동형태(扱胴形態)와 작물(作物)의 수분함량(水分含量)이 맥주보리의 탈곡성능(??性能)에 미치는 영향(影響)

이승규,김성태,민영봉,Lee, Seung Kyu,Kim, Sung Tae,Min, Young Bong 한국농업기계학회 1983 바이오시스템공학 Vol.7 No.2

The purpose of this experiment was to evaluate the effect of the drum structures and crop moisture contents on the performance of newly developed throw-in type axial thersher. Sachun No.2 malting barley with four different crop moisture levels was used as the testing material. Four different types of threshing drum; the cylindrical drum-equipped with teeth or rubber bars and the conical drum-equipped with teeth or rubber bars were tested. The results are summarized as follows; 1. The threshing efficiency of cylindrical drum was higher than that of the conical one, and the drum with teeth was more effective in threshing than the one with bars. However, the higher the threshing efficiency over the whole range of moisture levels and drum speeds given, the more the rapid and unexpectable variations in threshing efficiencies 2. The separation efficiency of the conical drum was decreased as drum speed was increased and was not so much influenced as crop moisture content. But in case of the cylindrical drum, the result was shown in opposite way to that of the conical one. The separation efficiency of the drum with teeth was higher than that of the drum with bars and no significant decrease in separating efficiency was found at wet crop condition. 3. Foreign matters other than grain passing through the concave sieve was decreased as crop moisture content was increased, and the purity was increased at middle range of drum speed regardless of drum types. 4. Minimum grain loss was found at 700 rpm to 800 rpm of drum speed for all types of drums. The effect of crop moisture content on total grain loss was varied with drum types. As far as the grain loss is concerned, the conical drum having teeth was not so greatly influenced by various crop moisture contents and drum speeds as compared with the other types of drum. 5. Generally, the crop moisture content has more relevant effect on the germination than the drum speed regardless of drum types. The germination percentage of grain threshed by the conical drum and the bar attached drum were higher than those of cylindrical one and teeth attached one, respectively.

급동형태와 작물의 수분함량이 맥주보리의 탈곡성능에 미치는 영향

이승규,김성태,민영봉 ( Seung Kyu Lee,Sung Tae Kim,Young Bong Min ) 한국농업기계학회 1982 바이오시스템공학 Vol.7 No.2