TRISO 피복 입자에서 증착 조건이 탄화규소층의 특성에 미치는 영향

박종훈,김원주,박정남,박경환,박지연,이영우,Park, J.H.,Kim, W.J.,Park, J.N.,Park, K.H.,Park, J.Y.,Lee, Y.W. 한국재료학회 2007 한국재료학회지 Vol.17 No.3

TRISO coatings on $ZrO_{2}$ surrogate kernels were conducted by a fluidized-bed chemical vapor deposition (FBCVD) method. Effects of the deposition temperature and the gas flow rate on the properties of SiC layer were investigated in the TRISO-coated particles. Deposition rate of the SiC layer decreased as the deposition temperature increased in the temperature range of $1460^{\circ}-1550^{\circ}C$. At the deposition temperature of $1550^{\circ}C$ the SiC layer contained an excess carbon, whereas the SiC layers had stoichiometric compositions at $1460^{\circ}C\;and\;1500^{\circ}C$. Hardness and elastic modulus measured by a nanoindentation method were the highest in the SiC layer deposited at $1500^{\circ}C$. The SiC layer deposited at the gas flow rate of 4000 sccm exhibited a high porosity and contained large pores more than $1{\mu}m$, being due to a violent spouting of particles. On the other hand, the SiC layer deposited at 2500 sccm revealed the lowest porosity.

특허확대경 - 특허소송 관할집중

박종훈,Park, Jong-Hun 한국발명진흥회 2011 發明特許 Vol.36 No.4

멀티미디어 서비스를 위한 DiffServ 망에서의 빠른 혼잡 제어 알고리즘

박종훈,유명식,Park Jonghun,Yoo Myungsik 한국통신학회 2005 韓國通信學會論文誌 Vol.30 No.1B

인터넷에서 멀티미디어 데이터가 트래픽의 상당 부분을 차지하면서 네트워크 혼잡 상황을 효과적으로 제어하는 방법이 필요하게 되었다. 또한 현재의 Best-effort 망을 통한 멀티미디어 데이터의 전송은 한정된 네트워크 자원과 다양한 환경 등으로 인해 QoS 보장이 어려워, 안정된 QoS를 제공하기 위한 IntServ, DiffServ 등의 새로운 QoS 망이 대두되었다. 하지만, RAP와 같은 송신측 기반 혼잡 제어 알고리즘은 흔잡 상황 제어에 ACK 응답에 따른 RTT 값의 변화를 이용하기 때문에, RTT 값이 큰 플로우는 상대적으로 RTT 값이 작은 플로우에 비해 ACK 응답이 늦어져 흔잡 상황에 대한 대처 시간이 늦어진다. 또한 DiffServ와 같은 QoS 망에는 호스트 단의 혼잡 제어알고리즘과는 별도의 혼잡 제어 알고리즘이 존재하여 호스트 단의 알고리즘에 악영향을 줄 수 있다. 본 논문에서는 네트워크 중심부의 흔잡 상황에 대하여 End-to-end ACK 응답에 의한 반응 이전에 네트워크의 혼잡 정보를 유기적으로 이용하여 혼잡 상황에 빨리 대처하는 기법을 제안한다. 제안된 기법을 통해 기존의 RTT기반의 혼잡 제어 기법의 문제점을 해결하고 그 성능을 향상 시켰다. As the multimedia application traffic takes more portion in the internet traffic, it is necessary to control the network congestion through the congestion control protocol. In addition, the QoS-enabled networks such as DiffServ become an indispensable technology when running the multimedia applications. However, the previously proposed end-to-end congestion control algorithms take the round trip time to react the network congestion. Thus, as the RTT becomes larger, the reaction against the congestion gets delayed further, while the network congestion gets worse. In addition the performance of end-to-end congestion control algorithm is degraded if the QoS-enabled network runs the congestion control mechanism in the network level without any coordination between them. In this paper, we propose the early rate adaptation protocol for the DiffServ network which effectively linke the congestion control algorithm at the host and the congestion mechanism in the network together. By taking advantage of early congestion notification from the network it is possible to react the network congestion more quickly and effectively.

농업용수 수질개선대책 추진방향

박종훈,Park, Jong-Hun 한국관개배수위원회 2006 한국관개배수논문집 Vol.13 No.1

저압화학기상증착법을 이용한 ZrC 성장에 잔류시간이 미치는 영향

박종훈,정충환,김도진,박지연,Park, Jong-Hoon,Jung, Choong-Hwan,Kim, Do-Jin,Park, Ji-Yeon 한국세라믹학회 2008 한국세라믹학회지 Vol.45 No.5

In order to investigate residence time effect on the growth of ZrC film, the ZrC films grew with various system total pressure (P) and total flow rate (Q) by low pressure chemical vapor deposition because residence time is function of system total pressure and total flow rate. Thermodynamic calculations predict that the decomposition of source gases ($ZrCl_4$ and $CH_4$) would be low as increasing the residence time. Thermodynamic calculations results were proved by investigating deposition rate with various residence time. Deposition rate decreased with residence time of source gas increased. Besides, depletion effect accelerated diminution of deposition rate at high residence time. On the other hands, the deposition rated was increased as decreasing the residence time because fast moving of intermediate gas species decrease the depletion effect. The crystal structure was not changed with residence time. However, the largest size of faceted grain showed up to specific residence time and the size of grain was decreased whether residence time increase or not.

천궁 메탄올 추출액의 멜라닌 형성 억제 효과

박종훈,김양진,문연자,이영철,우원홍,Park, Jong-Hun,Kim, Yang-Jin,Mun, Yeun-Ja,Lee, Young-Cheol,Woo, Won-Hong 대한동의생리학회 2005 동의생리병리학회지 Vol.19 No.3

Down-regulation of melanin synthesis is required for recovery of pigmentary disorders and it is known that direct inhibitors of tyrosinase suppress melanin synthesis. We screened several oriental medicinal plants using B16/Fl0 cells and found that the methanolic extract of Cnidii Rhizoma down-regulated melanin synthesis effectively. Although the proliferation of Bl6/Fl0 cells was decresed by the methanolic extract of Cnidii Rhizoma, it did not appear necrosis. Bl6/F10 cells incubated with the methanolic extract of Cnidii Rhizoma showed reduced pigmentation and tyrosinase activity. Western blotting revealed that the amount of tyrosinase was decreased by the methanolic extract of Cnidii Rhizoma. These results suggest that the inhibitary effect of the methanolic extract of Cnidii Rhizoma on melanogenesis is due to the suppression of tyrosinase in Bl6/F10 cells and Cnidii Rhizoma is a candidate for an efficient whitening agent.

안정적인 교합접촉을 잃은 환자에서의 전방유도를 고려한 치료증례

박종훈,조진현,Park, Jong-Hoon,Cho, Jin-Hyun 대한치과보철학회 2019 대한치과보철학회지 Vol.57 No.4

최근 들어 치아의 심미적인 개선을 위해 전치부 보철 치료를 하는 경우가 많다. 하지만 전치부 심미 보철치료이후 환자가 발음, 저작 등 기능적으로 불만족스럽게 생각하는 경우가 종종 있다. 전치부는 심미적으로 중요할 뿐만 아니라 교합과 관련하여서도 중심위 다음으로 중요한 전방유도가 성립되는 부분으로, 잘못된 전방유도 설정으로 인해 구치부의 교합간섭을 초래할 수 있다. 또한 새롭게 설정된 전치부 보철물의 전방유도가 환자의 기능로(envelope of function)과 조화를 이루지 않을 시 환자가 불편감을 나타낼 수 있다. 본 증례는 전치부 심미 보철 이후 부정확한 발음 및 안정적인 접촉이 없어서 불안정한 교합, 전반적인 불편감을 호소하는 환자에서 체계적인 진단과 치료과정을 통해 보철물을 재수복하여 환자와 술자 모두에게서 심미적으로, 그리고 기능적으로 만족스러운 결과를 얻었기에 보고하는 바이다. Recently, many patients undergo anterior prosthetic treatment for esthetic reasons. In some patients complain about functional reasons such as inaccurate pronunciation and occlusal discomfort after the treatment. Anterior teeth are important esthetically but in the occlusal point of view, anterior guidance is the second most important factor in occlusion, next to centric relation. Failure to determine an appropriate anterior guidance might lead to posterior occlusal interference, which can highly affect the stability of the posterior teeth. Also, discomfort might occur if the customized interior guidance is not in harmony with the patient's envelope of function. The patient in this case complained of overall discomfort in the maxillary anterior area after prosthetic treatment. The expressed difficulty in pronunciation, unstable occlusion due to lack of stable holding contact and discomfort of the facial muscles. Maxillary anterior prostheses were refabricated through systematic diagnosis and treatment and thus, this case presents esthetical and functional satisfaction to both the patient and the dentist.

온톨로지 기반의 학과 교과과정 관리 시스템 설계

박종훈,Park, Jong-Hoon 한국전자통신학회 2012 한국전자통신학회 논문지 Vol.7 No.6

Currently, basic simple search techniques for curriculum are being implemented. But curriculum information retrieval applying ontology technologies is still weak level. In this paper, the curriculum of university was divided into the liberal arts and majors, and we proposed frame model by these methodes and designed management system to construct ontology. This management system was composed of ontology input system and ontology web service system. Ontology input system constructed curriculum of department into ontology by administrator and we designed web service system to retrieve curriculum by students. We validated ontology designed for curriculum using ontology tool. 현재 학과 교과과정에 대한 개괄적인 단순 검색 기법들은 대부분 많이 구현되고 있으나, 온톨로지 기술을 적용한 체계적인 교과과정 정보검색은 아직 미약한 수준이다. 본 논문에서는 대학의 학과 교과과정을 전공과목과 교양과목을 중심으로 프레임 모델을 설계하고, 이를 중심으로 온톨로지를 구축할 수 있는 관리 시스템을 제안한다. 본 관리 시스템은 온톨로지 입력 시스템과 학과 온톨로지 웹서비스 시스템으로 구성하였다. 입력시스템은 관리자가 학과의 교과과정을 온톨로지로 구축하도록 구성하였고, 이 구축된 온톨로지를 이용하여 학생들이 교과과정을 검색하도록 웹서비스 시스템을 설계하였다. 이들 구축된 교과과정 온톨로지를 검증하기 위해 온톨로지 도구를 이용하여 검증하였다.

전자상거래 환경에서의 안전한 메시지 전송을 위한 웹 서비스 시스템 설계 및 구현

박종훈,김철원,Park, Jong-Hoon,Kim, Chul-Won 한국정보통신학회 2010 한국정보통신학회논문지 Vol.14 No.8

본 논문은 웹 서비스 표준을 이용하여 안전한 메시지 전송을 위한 웹서비스 시스템을 구현하였다. 본 시스템은 싱글사인온 모듈과 SSL(Secure Socket Layer) 모듈과 안전한 메시지 모듈로 구성되어 있다. 이들 모듈들을 적용하기 위해 가격비교사이트를 대상모델로 하여 설계하였다. 싱글사인온 모듈은 SAML(Security Assertion Markup Language) 표준을 사용하였으며, 또한 권한부여와 인증을 제공한다. SSL 모듈은 종단 간에 메시지 암호화를 처리하기 때문에, 시스템의 메시지를 안전하게 전송한다. 또한 안전한 메시지 모듈은 웹 서비스 보안 표준을 따르는 XML암호화와 서명을 적용하였다. This paper describes construction of web services system for secure message transmission appling web services standards. This system composes single sign on module, SSL module and secure message module. We applied these modules to price comparison site. Single sign on module used SAML standards. This module was designed, in order to provide authentication and authorization. As SSL module processes message encryption among end to end, messages of this system are secure. Secure message module is designed according to WS-Security standards and processes authentication, XML signature and XML encryption.

A $3{\mu}m$ Standard Cell Library Implemented in Single Poly Double Metal CMOS Technology

박종훈,박춘성,김봉열,이문기,Park, Jon Hoon,Park, Chun Seon,Kim, Bong Yul,Lee, Moon Key The Institute of Electronics and Information Engin 1987 전자공학회논문지 Vol.24 No.2

This paper describes the CMOS standard cell library implemented in double metal single poly gate process with 3\ulcornerm design rule, and its results of testing. This standard cell library contains total 33 cells of random logic gates, flip-flop gates and input/output buffers. All of cell was made to have the equal height of 98\ulcornerm, and width in multiple constant grid of 9 \ulcornerm. For cell data base, the electric characteristics of each cell is investigated and delay is characterized in terms of fanout. As the testing results of Ring Oscillator among the cell library, the average delay time for Inverter is 1.05 (ns), and the delay time due to channel routing metal is 0.65(ps)per unit length.