저합금 탄소강 배관재의 다층용접 열영향부의 미세조직 및 열이력 해석

김태완,하준욱,김동진,김정태,Kim, Tae-Wan,Ha, Jun-Uk,Kim, Dong-Jin,Kim, Jeong-Tae 대한기계학회 2002 大韓機械學會論文集A Vol.26 No.3

The purpose of this study is to analyze thermal cycles and to investigate microstructures of heat affected zones for a low alloy carbon steel pipe under a multipass weld. The commercial finite element code SYSWELD is used to compute thermal cycles during multipass weld. The numerical results such as thermal cycles and size of heat affected zone are compared with those of the experiment and the two results show a good agreement. In addition, the microstructure and hardness are investigated from the weldment in detail. The weakest location is founded at intercritical region near the base metal.

랫드 회장 종주근의 비아드레날린 비콜린성 신경에 의한 수축반응

김태완,나준호,성태식,강정우,양일석,한호재,Kim, Tae-wan,La, Jun-ho,Sung, Tae-sik,Kang, Jung-woo,Yang, Il-suk,Han, Ho-jae 대한수의학회 2003 大韓獸醫學會誌 Vol.43 No.3

The purpose of this study was to assess the role of tachykinins (TK) in mediating nonadrenergic noncholinergic (NANC) contractions produced by electrical field stimulation (EFS) in the longitudinal muscle of the rat ileum. In the presence of atropine ($1{\mu}M$), guanethidine ($5{\mu}M$), and L-nitroarginine (L-NNA, $200{\mu}M$), EFS (0.5ms pulse duration, 120 V, 1-20 Hz for 2 min) produced a frequency-dependent slowly-developing tonic contraction with superimposed phasic contractions ('on'-contraction) followed by off slowly-decreasing tonic and superimposed phasic contractions ('off'-contraction) of mucosa-free longitudinal oriented muscle strip. These EFS induced responses were blocked by tetrotoxin. $NK_1$ receptor selective antagonist L-732,138 strongly inhibited the EFS-induced excitatory responses. However $NK_2$ receptor selective antagonist, GR 159897 and $NK_3$ receptor selective antagonist SB 222200 did not significantly inhibited the responses. $NK_1$ receptor selective agonist [$Sar^9$,$Met(O_2)^{11}$] Substance P and $NK_2$ receptor selective agonist [${\beta}-Ala^8$]-neurokinin A (4-10) induced tonic contraction with superimposed phasic contractions of longitudinal oriented muscle strip and almost blocked by selective antagonist L-732,138 and GR 159897, respectively. But $NK_3$ receptor selective agonist senktide did not showed any effect. Nifedipine ($1{\mu}M$) abolished the contraction produced either by EFS or by the TK receptor agonists [$Sar^9$,$Met(O_2)^{11}$] Substance P or [${\beta}-Ala^8$]-neurokinin A (4-10). It is concluded that, in the longitudinal muscle of rat ileum, both $NK_1$ and $NK_2$ receptors modulated the responses to exogenous tachykinins, whereas $NK_1$ is mainly involved in NANC neuromuscular contraction.

The Effect of Acupuncture on the Intestinal Smooth Muscle Dysfunction Caused by Enteric Bacterial Infection in Weaning Piglet

김태완,나준호,성태식,강정우,남치주,최민철,윤여성,양일석,Kim, Tae-wan,La, Jun-ho,Sung, Tae-sik,Kang, Jeong-woo,Nam, Tchi-chou,Choi, Min-cheol,Yoon, Yeo-sung,Yang, Il-suk The Korean Society of Veterinary Science 2003 大韓獸醫學會誌 Vol.43 No.3

It is now generally accepted that acupuncture is effective in diarrhea caused by bacterial infection. However, its effect on the intestinal smooth muscle dysfunction is not clear. Therefore, we investigated the effect of acupuncture therapy at Jiao-chao (GV-1) on the intestinal muscle dysfunction in weaning piglets orally infected by Escherichia coli. The animals are divided into four groups; 1) E. coli + no-treatment, 2) E. coli + antibiotic, 3) E. coli + acupuncture, 4) normal group. In the three E. coli infected groups, low frequency electrical field stimulation (EFS, 1 Hz) provoked triphasic responses composed of initial relaxation followed by on-contraction and off-contraction. While in the normal group, EFS (1Hz) induced biphasic responses composed of relaxation during the stimulation and off-contraction. At the high frequency (16Hz) EFS, both on-contraction and off-contraction of the E. coli + antibiotic, E. coli + acupuncture and the normal group were larger than those of the E. coli + no-treatment group. In the non-adrenergic non-cholinergic (NANC) condition, only biphasic responses occurred to EFS in all experimental groups and the off-contraction of E. coli + antibiotic, E. coli + acupuncture and the normal group were larger than those of the E. coli + no-treatment group. The response to carbachol of those three groups was also significantly greater than that of the E. coli + no-treatment group. These results suggest that acupuncture is as effective as antibiotic in the dysfunction of colonic circular muscle caused by E. coli infection. The maintenance of contractile neuromuscular transmission seems to be involved in the mechanism of the acupuncture effects on diarrhea.

Bottom Ash의 최대입경에 따른 시간-의존적 거동 특성 및 크리프 모델 적용성 검토

김태완,손영환,봉태호,노수각,박재성,Kim, Tae-Wan,Son, Young-Hwan,Bong, Tae-Ho,Noh, Soo-Kack,Park, Jae-Sung 한국농공학회 2013 한국농공학회논문집 Vol.55 No.5

This study finds the characteristics of long-term settlement of Bottom Ash and to review the application of Singh-Mitchell creep equation and Burgers Model to the creep behavior of Bottom Ash. In the undrained state, it was confirmed that creep behavior appeared in the range to 30-80 % of the maximum deviator stress by applying condition in other three stresses through triaxial compression test after isotropically consolidation. By using sieve analysis, it was compared to each sample that was passed through 9.5 mm, 2 mm, 0.25 mm sieves. Also, using Singh-Mitchell creep equation and Burgers Model, it was compared between the theoretical behavior and the observed behavior for each sample. In the result, it is found that creep behavior of Bottom Ash is similar to the theoretical behavior of Singh-Mitchell creep equation and Burgers Model in early stage and it is possible to predict creep behavior of Bottom Ash by these models.

Bottom Ash의 전기적 특성과 일축압축강도

김태완,손영환,박재성,노수각,봉태호,Kim, Tae-Wan,Son, Young-Hwan,Park, Jae-Sung,Noh, Soo-Kack,Bong, Tae-Ho 한국농공학회 2014 한국농공학회논문집 Vol.56 No.1

The objective of this study is to find the electrical properties of Bottom ash from thermoelectric power plants in Korea. By using Parallel Plate Method, the electrical resistivity and dielectric constant were measured at the frequency from 20 Hz to 10 MHz. Also, unconfined strength test, XRF and sieve analysis were performed for finding the relationship between strength, physiochemical properties and electrical properties. In the result, the change of electrical resistivity and dielectric constant of bottom ash against frequency was similar to that of general soil. The proportion of fine grain in bottom ash had the positive correlation with dielectric constant and negative correlation with electrical resistivity. Chloride and sulfur trioxide were proportional to dielectric constant and the more bottom ash had chloride content, the lower electrical resistivity appeared in bottom ash. Unconfined strength of bottom ashes had a range from 200 kPa to 780 kPa and strength was inverse proportional to electrical resistivity.

Ti-6Al-4V 합금의 미세구조 분석

김태완,윤요한,오호라,박종범,이정일,류정호,Kim, Tae Wan,Yoon, Yo Han,Oh, Ho Ra,Park, Jong Bum,Lee, Jung-Il,Ryu, Jeong Ho 한국결정성장학회 2016 한국결정성장학회지 Vol.26 No.3

Ti-합금은 낮은 밀도, 낮은 탄성계수, 우수한 고온강도, 내산화성 및 인체적합성으로 자동차와 항공산업 및 바이오 산업에서 구조용 재료로 널리 연구되고 있다. 본 연구에서는 Ti-합금 중 대표적인 조성인 Ti-64(6 wt% Al, 4 wt% V) 합금에 대한 결정학적 특성과 미세조직에 대해서 알아보고자 하였다. XRD 분석을 통하여 Ti-64 샘플의 주요 결정상을 분석하였고, FE-SEM 및 EDX 분석을 통하여 Ti-64 합금 샘플의 미세구조를 화학조성의 차이에 의해 고찰하였다. Ti alloys have been used for orthopedic devices, automobile and aircraft because it has several beneficial properties such as a low density, a low modulus of elasticity, excellent high-temperature strength, excellent corrosion resistance and biocompatibility. In this study, Ti-64 composition (6 wt% Al, 4 wt% V) is investigated as a representative Ti-alloy system on the crystallographic characteristics and microstructure. We investigated crystal structure of the Ti-64 sample by XRD, and analyzed microstructure by compositional differences measured using FE-SEM and EDX.

표면거칠기의 변화에 따른 미끄럼 마찰 특성

김태완,이상돈,조용주,Kim, Tae-Wan,Lee, Sang-Don,Cho, Yong-Joo 한국기계가공학회 2004 한국기계가공학회지 Vol.3 No.2

The effect of surface characterization parameters, such as surface roughness, skewness and kurtosis, on sliding friction and wear was studied experimentally. The friction coefficient was examined under the various parameters and sliding speed, normal load and type of lubricant with ball-on-disk type tribo-meter. The surface of the lower skewness in negative or the higher kurtosis between the same arithmetic mean value tends to indicate low friction.

GIS 예방진단시스템을 위한 TMO 응용 데이터 수집 시스템

김태완,김윤관,장천현,Kim, Tae-Wan,Kim, Yun-Gwan,Jang, Cheon-Hyeon 한국정보처리학회 2009 정보처리학회논문지 A Vol.16 No.6

가스절연개폐장치(Gas Insulated Switchgear:GIS)는 SF6가스를 절연 매체로 하는 대용량 전력 차단기기이다. GIS는 단순한 구조로 고장이 적고 신뢰성이 높은 편이지만 내부를 볼 수 없어 고장 확인이 어렵고 고장이 발생하면 파급 효과가 크고 복구가 어렵다. 따라서 GIS 내부의 이상 징후를 초기에 찾아낼 수 있도록 GIS 예방진단시스템이 도입되었다. GIS 예방진단시스템은 센서에서 수집, 분석한 정보로 이상 징후를 판 단하기 때문에 데이터의 신뢰성과 적시성이 중요하다. 하지만 기존 시스템은 중앙 집중 데이터 수집 방식으로 효율이 낮고 신뢰성과 적시성의 보장이 어렵다. 이러한 신뢰성과 적시성을 보장하기 위하여 GIS 예방진단시스템은 실시간성을 보장하는 미들웨어를 탑재해야 한다. 따라서 본 논문에서는 GIS 예방진단시스템의 신뢰성 향상을 위하여 실시간 분산 컴퓨팅의 적시성 보장을 위해 제안된 TMO를 적용한 미들웨어를 사용한 다. 그리고 TMO를 적용한 데이터 수집 및 감시, 제어 방법을 적용한 새로운 GIS 예방진단 시스템을 제안한다. 논문에서 제안하는 시스템은 TMO의 실시간 기능을 활용하여 데이터의 분산 처리가 가능한 통신제어장치를 개발하여 사용한다. 통신제어장치는 TMO를 통해 실시간 데이 터 수집 및 처리 과정의 적시성을 보장하고 데이터의 신뢰성을 높여 시스템의 성능 향상에 기여한다. 또한, 기존의 서버의 데이터 수집 및 처 리 과정을 통신제어장치가 부담하여 서버의 부하를 줄이고 향후 분산 환경을 지원할 수 있도록 설계하였다. 따라서 제안하는 시스템은 통신제 어장치의 적시성 보장을 통해 GIS 예방진단시스템의 신뢰성과 성능을 향상시키고 GIS의 안정적인 운영을 보장할 수 있다. GIS is used to isolate large power electrical equipment using SF6 gas. While GIS has simple structure, it has few break down, relatively high reliability. But it is hard to check up faults for reason of pressure. Faults of GIS should have a ripple effect on community and be hard to recovery. Consequently, GIS imports a preventive diagnostic system to find internal faults in advance. It is most important that reliability on the GIS preventive diagnostic system, because it estimates abnormality of system by analysis result of collected data. But, exist system which used central data management is low efficiency, and hard to guarantee timeliness and accuracy of data. To guarantee timeliness and accuracy, the GIS preventive diagnostic system needs accordingly to use a real-time middleware. So, in this paper, to improve reliability of the GIS preventive diagnostic system, we use a middleware based on TMO for guaranteeing timeliness of real-time distributed computing. And we propose an improved GIS preventive diagnostic system applying data acquisition, monitoring and control methods based on the TMO model. The presented system uses the Communication Control Unit(CCU) for distributed data handling which is supported by TMO. CCU can improve performance of the GIS preventive diagnostic system by guaranteeing timeliness of data handling process and increasing reliability of data through the TMO middleware. And, it has designed to take full charge of overload on a data acquisition task had been processed in an exist server. So, it could reduce overload of the server and apply distribution environment from now. Therefore, the proposed system can improve performance and reliability of the GIS preventive diagnostic system and contribute to stable operation of GIS.

재실자 시뮬레이션(occupancy simulation)을 위한 재실자와 건물 공간 맵핑 기술 연구 동향

김태완,Kim, Tae-Wan 한국건설관리학회 2015 건설관리 : 한국건설관리학회 학회지 Vol.16 No.5

4차산업혁명 건설기술에 대한 학생, 교수, 실무종사자 인식차이 조사

김태완,박성훈,최병주,강영철,박경모,정운성,구충완,Kim, Tae Wan,Park, Seonghun,Choi, Byungjoo,Kang, Youngcheol,Park, Kyungmo,Jeong, WoonSeong,Koo, Choongwan 한국건설관리학회 2022 한국건설관리학회 논문집 Vol.23 No.3

Recently, the fourth industrial revolution has a great influence on the development of many industries as well as the construction industry. Various technologies related to the industrial revolution 4.0, such as AI and big data, have gained much attention. However, little has been known about the importance and preparedness of stakeholders of the construction industry in Korea for the industry 4.0 technologies so far. This study revealed how the stakeholders perceive and prepare for industry 4.0 using a survey. In addition, collaboration potential score for each technology was calculated to find technologies with high potential for collaboration. Result is that the importance of the technologies was evaluated high in overall, but the preparedness and implementation in university education or business was evaluated low. Technologies with high potential for industry-university collaboration are AI/big data and 3D printing/3D scanning. This study can contribute to the training of industry 4.0 experts and improving preparedness, which would enable the innovation and application of industry 4.0 technologies in the construction industry.