http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김의석,이우언 대구산업정보대학 1994 논문집 Vol.8 No.-
This study was to review the lituratures of vocatinal stress(in the industrial setting) and to develop a effective coping strategy of this stress. The conclusion of this study was followes. (1) There were various coping strategies of stress in the industrial setting and this established coping strategies had a little problem(for example, time schedule, motivating) (2) Accordingly, a new coping strategy was prpposed. This new stretegy is to handle personal thinking problem.
김의석,Kim, Ui-Seok 한국데이터베이스진흥원 1999 디지털콘텐츠 Vol.12 No.-
지난 1년전부터 인터넷 마케팅에 대해서 국내에서도 거센 바람이 불고 있다고 하여도 과언이 아니다. 이런 시점에서 차별화 되고 실질적으로 고객에게 1:1 마케팅이 근간이 되는 E-Mail Marketing은 최근 세인들의 주요 관심사가 되고 있다. E-Mail 서비스의 개발과 전개되는 방안에 대하여 살펴본다.
신호전이그래프에 기반한 비동기식 논리합성의 고유한 특성을 고려한 신호전이그래프의 자동생성
김의석,이정근,이동익,Kim, Eui-Seok,Lee, Jeong-Gun,Lee, Dong-Ik 한국정보처리학회 2002 정보처리학회논문지 A Vol.9 No.3
신호전이그래프는 비동기식 유한상태기와 더불어 신호수준에서 비동기식 제어회로의 사양을 기술하기 위하여 사용되는 가장 대표적인 사양 기술언어이다. 그러나 신호전이그래프는 설계자에게 친숙한 사양기술언어가 아니며, 결과적으로 비동기식 시스템의 설계자가 목적시스템의 비동기식 제어부를 구성하는 수∼수십개의 비동기식 제어회로에 대한 신호전이그래프를 일일이 고안하고 기술하는 것은 매우 힘들고 시간소모적인 일이다. 본 논문에서는 최근에 제안된 프로세스 중심방식을 이용하여 신호전이그래프를 자동으로 생성하는 방법을 제안하고자 한다. 특히, 제안된 방법은 신호전이그래프의 자동생성 과정에서 신호전이그래프에 기반한 비동기식 논리합성의 고유한 특성들을 주의 깊게 고려하여 준다. 결과적으로 자동 생성된 신호전이그래프로부터 합성된 비동기식 제어회로는 면적, 합성시간, 성능, 구현성의 측면에서 매우 우수하다. Along with an asynchronous finite state machine, in short AFSM, a signal transition graph, in short STG, is one of the most widely used behavioral description languages for asynchronous controllers. Unfortunately, STGs are not user-friendly, and thus it is very unwieldy and time consuming for system designers to conceive and describe manually the behaviors of a number of asynchronous controllers which constitute an asynchronous control unit for a target system in the form of STGs. In this paper, we suggest an automatic STG derivation method through a process-oriented method. Since the suggested method considers special properties of STG-based asynchronous logic synthesis very carefully, asynchronous controllers which are synthesized from STGs derived through the suggested method are superior in aspects of area, synthesis time, performance and implementability compared to those obtained through previous methods.
컨텐츠 보호를 위한 DTCP용 타원곡선 암호(ECC) 연산기의 구현
김의석,정용진,Kim Eui seek,Jeong Yong jin 한국통신학회 2005 韓國通信學會論文誌 Vol.30 No.3C
본 논문에서는 디지털 컨텐츠 보호를 위해 표준으로 제정된 DTCP(Digital Transmission Contents Protection)용 타원 곡선 암호(ECC) 연산기의 구현에 대해 기술한다. 기존의 시스템이 유한체 GF(2/sup m/)를 사용하는 것과는 달리 DTCP에서는 소수체인 GF(p)에서 타원 곡선을 정의하여 인증 및 키 교환을 위해 ECC 암호 알고리즘을 사용하고 있다. 본 논문에서는 ECC 알고리즘의 핵심 연산인 GF(p) 상에서의 스칼라 곱셈 연산기를 구현하였으며, 이 중 가장 많은 시간과 자원을 필요로 하는 나눗셈 연산을 제거하기 위하여 투영 좌표 변환 방법을 이용하였다. 또한, 효율적인 모듈러 곱셈 연산을 위하여 몽고메리 알고리즘을 이용하였으며, 곱셈기의 처리 속도를 빠르게 하기 위해 CSA(Carry Save Adder)와 4-레벨의 CLA(Carry Lookahead Adder)를 사용하였다. 본 논문에서 설계한 스칼라 곱셈기는 삼성전자 0.18 un CMOS 라이브러리를 이용하여 합성하였을 경우 64,559 게이트의 크기에 최대 98 MHz까지 동작이 가능하며 이 때 데이터 처리속도는 29.6 kbps로 160-blt 프레임당 5.4 ms 걸린다. 본 성능은 실시간 환경에서 DTCP를 위한 디지털 서명, 암호화 및 복호화, 그리고 키 교환 등에 효율적으로 적용될 수 있다. In this paper, we implemented an Elliptic Curve Cryptography(ECC) processor for Digital Transmission Contents Protection (DTCP), which is a standard for protecting various digital contents in the network. Unlikely to other applications, DTCP uses ECC algorithm which is defined over GF(p), where p is a 160-bit prime integer. The core arithmetic operation of ECC is a scalar multiplication, and it involves large amount of very long integer modular multiplications and additions. In this paper, the modular multiplier was designed using the well-known Montgomery algorithm which was implemented with CSA(Carry-save Adder) and 4-level CLA(Carry-lookahead Adder). Our new ECC processor has been synthesized using Samsung 0.18 m CMOS standard cell library, and the maximum operation frequency was estimated 98 MHz, with the size about 65,000 gates. The resulting performance was 29.6 kbps, that is, it took 5.4 msec to process a 160-bit data frame. We assure that this performance is enough to be used for digital signature, encryption and decryption, and key exchanges in real time environments.
김의석 한국분말야금학회 1996 한국분말재료학회지 (KPMI) Vol.3 No.4
Investigation on the extrusion of rapidly solidified Al-Si alloys was performed in order to develop an inexpensive production process of high strength parts. It is necessary to establish optimum process variables for the extruding condition through the experiments, because it is high cost and time consuming process. In this paper, the experimental results was compared to the finite element analysis for the extrusion of rapidly solidified Al-Si alloys. The results of this simulation helped to understand the distribution of relative density and effective stress for rapidly solidified Al-Si alloys during the extrusion process. This information is expected to assist in improving the extrusion operations of rapidly solidified Al-Si alloys.