http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
ITO 투과율 향상을 위한 Buffer층 설계에 관한 연구
기현철,이정빈,김상기,홍경진,Ki, Hyun-Chul,Lee, Jeong-Bin,Kim, Sang-Ki,Hong, Kyung-Jin 한국전기전자재료학회 2010 전기전자재료학회논문지 Vol.23 No.1
We have proposed an Buffer layer to improve the transmittance of ITO. Here, $SiO_2$ and $TiO_2$ were selected as the Buffer layer coating material. The structures of Buffer layer were designed in ITO/$SiO_2/TiO_2$/Glass and ITO/Glass/$TiO_2/SiO_2$. Then, these materials were deposited by ion-assisted deposition system. Transmittances of deposited ITO were 86.14 and 85.07%, respectively. These results show that the proposed structure has higher transmittance than the conventional ITO device.
전도성 기판의 플라즈마 처리에 따른 염료감응형 태양전지 광전변환 효율 특성 변화
기현철,김선훈,김두근,김태언,홍경진,소순열,Ki, Hyun-Chul,Kim, Seon-Hoon,Kim, Doo-Gun,Kim, Tae-Un,Hong, Kyung-Jin,So, Soon-Yeol 한국전기전자재료학회 2012 전기전자재료학회논문지 Vol.25 No.11
This study is explore the photoelectric conversion change of dye-sensitized solar cells with surface treatment of the conductive substrate. gases of FTO surface treatment were $N_2$, and $O_2$. Treatment conditions of surface were gas flux from 25 sccm to 50 sccm and RF power were from 25 W to 50 W. Treatment time and pressure were fixed 5 min and 100 mtoor. The best sheet resistance and surface roughness were obtained by $O_2$ 50 sccm and 50 W and that result were 7.643 ${\Omega}/cm^2$ and 17.113 nm, respectively. The best efficiency result was obtained by $O_2$ 50 sccm and 50 W and that result of Voc, Jsc, FF and efficiency were 7.03 V, 14.88 $mA/cm^2$, 63.75% and 6.67%, respectively.
ZigBee기반 개인영역망을 사용한 무선 다중 통합 레이저 교전 시스템의 구현
기현철 한국인터넷방송통신학회 2014 한국인터넷방송통신학회 논문지 Vol.14 No.4
ZigBee를 이용한 개인영역망으로 구성된 무선 다중 통합 레이저 교전 시스템을 구현하였다. 무선 레이저 검출기는 아날로그 신호처리, 해독 및 무선통신 기능을 갖추어야하는 반면 병사의 신체에 부착될 수 있도록 저전력소모, 소형 및 경량화 되어야한다. 소형 및 경량화를 위해 해독기는 소프트웨어적으로 구현하였고, 협대역 광학 필터를 이용하여 시스템의 부하를 줄여줌으로써 저전력화를 꽤하였다. 제작된 무선 레이저 검출기는 광잡음 환경에서도 정상 작동하였다. 무선 개인영역망을 통한 PU(Player Unit)와의 통신은 무선 레이저 검출기의 부착 위치에 따라 다소 차이가 있었으나 -40.2dBm이상의 출력으로 송신할 경우 100%의 수신율을 확보할 수 있었다. We realized a wireless multiple integrated laser engagement system composed of personal area network using Zigbee. The wireless laser detector had function of analog signal processor, decoder and wireless communication. However, it should consume low power and be small and light in order to be attached to a soldier’s body. The decoder was realized in software to be small and light. We induced low power consumption as reducing the load of system using a narrow band optical filter. The fabricated wireless laser detector functioned well in optically noisy environment. Although the communication to the player unit through the wireless personal area network was dependent on the attachment place it was perfectly worked with transmission power of -40.2dBm or more.
자수된 다이폴 어레이 안테나에 미치는 기울임과 굽힘의 영향
기현철 한국인터넷방송통신학회 2022 한국인터넷방송통신학회 논문지 Vol.22 No.2
In this paper, we investigated the effect of tilting and bending of an 2.45GHz ISM band embroidered dipole array antenna due to the human body movement. The antenna characteristics showed larger variations in tilting on the X-axis than the Y-axis. The antenna gain varied by 0.25[dB] when the antenna tilted by 3.5o. As tilting angle increased the operating frequency(fo) showed decreasing tendency and the return loss(S11) showed increasing tendency. The antenna characteristics also showed more variation in bending on the X-axis than the Y-axis. As bending the antenna the antenna characteristics affected much more in bending on the X-axis than the Y-axis. The antenna gain varied by 3.73[dB] as the curvature(1/R_rad) increased by 0.04[mm-1]. As it bended more the operating frequency(fo) showed decreasing and then increasing tendency and the return loss(S11) showed increasing tendency. 본 논문에서는 자수된 2.45GHz ISM 밴드 다이폴 어레이 안테나가 인체의 움직임에 의해 발생된 기울임과 굽힘에 의해 받는 영향 대해 분석하였다. 안테나의 특성은 Y축으로 기울임보다는 X축으로 기울임에서 보다 큰 변화를 보였다. 안테나 이득은 3.5o 기우렸을 때 0.25[dB] 만큼의 변화했다. 기울임 각이 증가함에 따라 동작주파수(fo)는 감소하는경향을 보이고 반사손실(S11)은 증가하는 경향을 보였다. 굽힘에 따른 안테나의 특성도 Y축보다 X축으로 굽힘에서 보다큰 영향을 받았다. 안테나 이득은 곡률(1/R_rad)을 0.04[mm-1]만큼 증가시켰을 때 3.73[dB] 만큼의 변화를 보였다. 굽힘이 증가함에 따라 동작주파수(fo)는 감소했다 다시 증가하는 경향을 보이고 반사손실(S11)은 계속 증가하는 경향을보였다.
고속 버스트 모드 광 송신기에 적합한 자동 전력 제어 회로
기현철 대한전자공학회 2006 電子工學會論文誌-SD (Semiconductor and devices) Vol.43 No.11
The conventional burst-mode APC(Automatic Power Control) circuit had an effective structure that was suitable for a low power consumption and a monolithic chip. However, as data rate was increased, it caused errors due to the effect of the zero density. In this paper, we invented a new structured peak-comparator which could compensate the unbalance of the injected currents using double gated MOS and MOS diode. And we proposed a new burst-mode APC adopting it. The new peak-comparator in the proposed APC was very robust to zero density variations maintaining the correct decision point of the current comparison at high data rate. It was also suitable for a low power consumption and a monolithic chip due to lack of large capacitors. 기존의 버스트 모드 자동전력제어 회로는 저 전력과 단일 칩화에 적합한 효율적인 구조인 반면에 데이터 율(data rate)이 높아짐에 따라 영의 밀도(zero density) 영향을 심하게 받아 에러를 야기하였다. 본 논문에서는 더블 게이트 MOS와 MOS다이오드를 이용하여 주입전류의 불균형을 보상하는 할 수 있는 새로운 구조의 첨두 비교기를 고안하고 이를 자동전력제어 회로에 적용하여 높은 데이터 율에서도 영의 밀도 변화에 강한 버스트 모드 자동전력제어 회로를 제안하였다. 제안한 자동전력제어 회로 내의 첨두 비교기는 높은 데이터 율에서 영의 밀도 변화에도 불구하고 정확한 전류비교 기준점을 견지하며 에러 없이 정상동작 하였다. 또한 제안한 첨두 비교기는 저전력 구조이고 대용량의 커패시터가 사용되지 않아 단일 칩화에도 적합하였다.
Micro Lens Design for Efficiency Improvement of Red Organic Light-emitting Diode
기현철,김두근,김선훈,정우라,김상기,홍경진 한국물리학회 2012 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.61 No.9
We have proposed micro lens to improve the luminance of red Organic Light Emitting Device. Micro-lenses were applied on the Glass/ITO/ROLED. Size, height and distance of micro-lenses were calculated by FDTD(Finite-Difference Time-Domain) solution. We have simulation result according to micro-lens size (5um, 10um). Result, size of micro lenses were 5 ㎛. Height and distance of micro-lens were all 1 um. The material of micro lenses used silicon dioxide. Result, The highest luminance of OLED which applied with micro-lens was 11,185 cd/m2, when approval voltage was 14.5 V, The device efficiency applying micro-lens increased 3 times than the device which does not apply micro-lens.
기현철 한국인터넷방송통신학회 2013 한국인터넷방송통신학회 논문지 Vol.13 No.5
1.25Gbps PON(Passive Optical Network)용 버스트 모드 광 수신기를 설계하고 0.8μm BiCMOS공정을 사용 해 제작하였다. 지수함수 증폭기를 이용하여 AGC(Automatic Gain Control) 신호 생성 소요 시간을 단축시켜 버스트 앞부분의 데이터 손실을 최소화하였다. 측정결과 버스트 모드 광 수신기의 AGC 기능은 정상적으로 잘 동작하고 특 성도 양호함을 확인하였다. 한편, 아이패턴의 아이는 열려있기는 하나 심한 파형 왜곡이 있고, 이로 인해 지터 특성 저하되고 있었다. We designed a burst mode optical receiver for 1.25Gbps PON(Passive Optical Network), fabricated it using 0.8μm BiCMOS foundry. We minimized the loss of the data in the front of the burst by reducing AGC(Automatic Gain Control) signal generation time using an exponential amplifier. We confirmed that AGC of the burst mode optical receiver functioned well and showed good performance in measurement. However, although the eye of the eye pattern was opened the jitter characteristic was deteriorated due to the heavy waveform distortion.
바인더 함량에 따른 염료감응 태양전지의 효율에 관한 연구
기현철,정행윤,구할본,Ki, Hyun-Chul,Jung, Haeng-Yun,Gu, Hal-Bon 한국전기전자재료학회 2013 전기전자재료학회논문지 Vol.26 No.12
In this study, we have fabricated the dye sensitized solar cell (DSSC) composed by a transparent conductive oxide (TCO), a nanocrystalline semiconductor film usually $TiO_2$, a sensitizer adsorbed on the surface of the semiconductor, an electrolyte containing a redox mediator and a counter electrode. The $TiO_2$ nanopowder was prepared by sol-gel methode. The HCl (hydrochloric acid) and TBAOH (Tetrabutyl amonium hydroxide) was added for improving the catalyst and distributed properties of $TiO_2$ nanopowder. Ammonium hydroixde was added in order to control the morphology and size of $TiO_2$ nano crystal. A $TiO_2$ paste for working electrode was prepared with the addition of HPC (hydroxypropyl cellulos) used as a binder of which volume was controled as 1.3, 1.5, 1.7, and 2.0%. The measured I-V curves of assembled DSSC showed that the cell with 1.7% HPC binder had the best efficiency of 6.79%.