The insect community structure with indicator species along vegetation composition in Is. Nam-hae, South Korea

Jong Woo NAM,Shin Young PARK,Ik Jae CHOI,Young Min SHIN,Il-Kwon KIM 한국응용곤충학회 2015 한국응용곤충학회 학술대회논문집 Vol.2015 No.04

An insect faunal survey was carried out to investigate insect community structure along the vegetation community to monitor insect species in forest ecosystem. We performed day and night collections from June to August along three vegetation communities of Is. Nam-hae in 2014: the first stand with Pinus thunbergii, the second P. thunbergii with Quercus serrata and the third P. thunbergii with various Quercus species. In total 2,259 individuals of 532 species, 99 families, 13 orders are identified. Cluster Analyses (CA) showed that all three vegetation communities were relatively similar between vegetation community types. According to indicator species analysis (ISA) result, nine significant indicator species were identified (p < 0.05); five species were found to be affected by the vegetation cluster and four species the month cluster.

제2형 당뇨병 남성 환자에서 유리 테스토스테론과 성호르몬 결합 글로블린 농도

남기덕,김영설,박철영,오승준,김덕윤,우정택,김성운,양인명,김진우,최영길 대한당뇨병학회 2002 Diabetes and Metabolism Journal Vol.24 No.6

연구배경:인슐린저항성은 제2형 당뇨병과 심혈관질환의 주요한 위험 인자로 성호르몬과 상호 관계가 있다고 알려져 있다. 그러나 여성과는 달리 남성에서는 연령과 인슐린저항성에 따른 유리 테스토스테론과 성호르몬 결합 글로블린 농도의 변화에 대한 연구가 부족한 실정이다. 그러므로, 본 저자등은 제2형 당뇨병 남성 환자에서 정산인과 비교해서 유리 테스토스테론과 성호르몬 결합 글로블린 농도를 측정하고 연령에 따른 변화 정도를 알아보고자 하였다. 방법:대상 환자 모두에서 연령과 체질량지수, 총 콜레스테롤, 중성지방, 공복혈당과 인슐린 농도를 측정하였다. 혈중 유리 테스토스테론 농도는 방사면역측정법(radioimmunoassay)을 이용해서 측정하였고, 혈중 성호르몬 결합글로불린은 면역방사계측측정법(immunoradiometric assay)을 이용해서 측정하였다(Diagnostic System Laoratories, Wbster, TX, USA). 결과:1)제2형 당뇨병 남성 환자에서 정상 대조군 남성에 비해 성호르몬 결합글로불린은 104.1±35.0 vs 25.7±3.5 mole×10??로 의미 있게 높았으나(p<0.001), 유리 테스토스테론은 13.7±9.5 vs 13.6±6.5 ng/dL로 차이가 없었다. 2)연령과 성호르몬 결합 글로블린 사이의 상관 계수는 제2형 당뇨병 남성 환자에서 0.40로 중등고의 양의 상관 관계를 보였고(p<0.001), 정상 대조군 남성에서 0.11로 유의한 상관 관계를 보이지 않았다. 연령과 유리 테스토스테론 사이의 상관 계수는 제2형 당뇨병 남성 환자에서 0.08, 정상 대조군 남성에서-0.17로 모두에서 유의한 상관 관계를 보이지 않았다. 3)연령과 체질량지수를 보정한 후에 제2형 당뇨병 남성 환자와 정상 대조군 남성에서 혈중 인슐린 농도, 유리 테스토스테론과 성호르몬 결합 글로블린 사이에는 상관 관계가 없었다. 결론:제2형 당뇨병 남성 환자에서 정상 남성에 비해 성호르몬 결합 글로블린 농도가 증가되어 있었으며, 유리 테스토스테론은 차이가 없었다. 연령이 증가함에 따라 성호르몬 결합 글로블린이 제2형 당뇨병 남성 환자에서 정상 남성에 비해 증가 폭이 의미있게 컸으며, 유리 테스토스테론은 변화가 없었다. Background: Insulin resistance is a risk factor for cardiovascular disease and type 2 diabetes mellitus. There are many previous studies indicating that insulin lowers serum sex hormone-binding globulin levels, and there is inverse correlation between insulin resistance and serum sex hormone-binding globulin levels in women. However, in men, a limited number of studies are available to explain the effect of sex hormone on age and insulin. Therefore, the present study was undertaken to investigate the relationship among free testosterone, hormone-binding globulin and age in type 2 diabetic men and control subjects. Method: Age, body mass index, total cholesterol, triglyceride, fasting blood sugar, and insulin concentrations were examined on 89 type 2 diabetic men and 47 control subjects. The free testosterone level was measured by commercially available double-antibody system (Radioimmunoassay). The sex hormone-binding globulin level was also measured by commercially available double-antibody system(Immunoradiometric assay). Results: 1) Sex hormone-binding globulin level was significantly increased in patients with type 2 diabetes. However, there was no significantly difference in free testosterone level between the two groups. 2) Sex hormone-binding globulin was positively correlated with age (r=0.4, p <0.001) in patients with type 2 diabetes. Sex hormone-binding globulin and free testosterone were not correlated with age in control sujects. 3) Free testosterone and sex hormone-binding globulin concentrations were not significantly related to serum insulin concentration after adjusting for age and body mass index. Conclusions: We observed increased sex hormone-binding globulin concentration in diabetes man, and was a positively related to age. Further studies are needed to understand the relationships between age, insulin resistance, testosterone, and sex hormone-binding globulin concentrations(J Kor Diabetes Asso 24:699~707,2000).

영골(靈骨).강압혈(降壓穴) 자극(刺鍼)이 혈압(血壓)에 미치는 영향(影向)

임영남,심성용,한지완,고호연,박종형,한양희,전찬용,김동우,Yim, Young-Nam,Sim, Sung-Yong,Han, Ji-Wan,Ko, Ho-Yeon,Park, Chong-Hyeong,Han, Yang-Hee,Chun, Chan-Yong,Kim, Dong-Woo 대한한방내과학회 2004 大韓韓方內科學會誌 Vol.25 No.2

Objective : The purpose of this study is to evaluate the clinical effect of the non-pharmacological anti-hypertension method, acupuncture, for hypertensive patients. Methods : 26 patients diagnosed with hypertension were each treated by one of three methods: an anti-hypertension drug(adalat soft capsule), venepuncture, and acupuncture. In cases of rising blood pressure, patients were treated by their one of the three methods, and blood pressure was measured at regular intervals. Result : As for the group of acupuncture treated patients on Young-gol(ling-gu) and Gang-ap-hyul(jiang-ya-xue), readings dropped 18.0mmHg in systolic blood pressure and 6.50mmHg in diastolic blood pressure. This was a greater effect than that seen in the venepuncture treated patients. Blood pressure checked one hour after acupuncture treatment showed a greater difference than blood pressure checked after thirty minutes. Conclusion : Safe reductions in blood pressure were observed through the non-pharmacological method of acupuncture on Young-gol(ling-gu) and Gang-ap-hyul(Jiang-ya-xue).

당류중에서 일산화탄소의 발생에 관한 연구

박성우,김남이,서중석,최영남,이광영,양영근 內務部 國立科學搜査硏究所 1996 國立 科學 搜査 硏究所 年報 Vol.28 No.-

Continuous Wave of Condensation Technique으로 근관충전시 치근면 온도상승 분석

김영주,황윤찬,김선호,황인남,최보영,정영진,정우남,오원만 大韓齒科保存學會 2003 Restorative Dentistry & Endodontics Vol.28 No.4

This study was conducted to evaluate the temperature rise on the root surface while the root canal is being obturated using continuous wave of condensation technique. Maxillary central incisor was prepared for repeated canal obturation. Ten thermocouples (Omega Engineering Inc., Stanford, USA) were placed at 1mm increment from the anatomical root apex. The real temperature of Buchanan plugger was recorded before insertion into the root canal. The root canal was obturated with continuous wave of condensation technique as described by Buchanan and the root surface temperature was recorded during obturation at 150℃, 200℃, 250℃ and 300℃ temperature settings of System B HeatSource (Model 1005, Analytic technologies, Redmond, WA, USA). After completion of the temperature recording, the dentinal-cementum thickness at each sites was measured. The data were analyzed using one-way ANOVA followed by Scheffe's test and linear regression test. The results were as follows. 1. When the temperature was set at 150℃, 200℃, 250℃ and 300℃ on the digital display of System B HeatSource, the real temperature of the plugger at the 1mm point from the tip revealed 130.82±2.96℃ 158.00±5.26℃, 215.93±6.91℃ and 249.88±3.65℃ respectively. 2. The position of 8 mm from the anatomical apex showed the highest temperature increase at each temperature settings and it was significantly higher than those of other positions (p<0.01). The temperature rise was constantly increased toward coronal portion from apex of the root. 3. The maximum temperature increase on the root surface was 2.37±0.09℃ at 150℃ setting, 3.11±0.12℃ at 200℃ setting, 3.93±0.09℃ at 250℃ setting and 5.69±0.15℃ at 300℃ setting respectively. These results suggest that it be relatively kind to the supporting tissues of the root that the root canal is obturated using continuous wave of condensation technique at 150℃, 200℃, 250℃ and 300℃ temperature settings on digital temperature display of System B HeatSource.

Continuous Wave of Condensation Technique으로 근관충전시 치근면 온도상승 분석

김영주,황윤찬,김선호,황인남,최보영,정영진,정우남,오원만 전남대학교 치의학연구소 2003 구강과학 Vol.15 No.4

This study was conducted to evaluate safety to the supporting tissues of the root while the root canal is obturated using continuous wave of condensation technique. A extracted maxillary central incisor was prepared for repeated canal obturation. After conventional access opening, working length was then established to the point 1㎜ from anatomical root apex. The root canal was prepared with GT rotary Ni-Ti file (Dentsply Maillefer, Switzerland). Five thermocouples (Onega Engineering Inc., USA) were placed at 2㎜ increments on one side beginning 1㎜ from the anatomical root apex and the other five thermocouples at 2㎜ increments on the other side beginning 2㎜ from it. For obturation, a nonstandardized medium size gutta-percha cone and a ML Buchanan plugger (Analytic technologies, USA) were selected. After drying of root canal, AH 26 root canal sealer (Dentsply Detrey, Germany) was applied on the wall of the root canal. Baseline temperature was measured on the root surface. The ML size plugger was preheated for 2seconds and then the real temperature of it was recorded before insertion into the root canal. The root canal was obturated with continuous wave of condensation technique as described by Buchanan. The root surface temperature was recorded during obturation and it was performed ten times at each of the following temperature settings: 150℃, 200℃, 250℃ and 300℃. After completion of the temperature recording, the dentinal-cementum thickness at each sites where thermocouples were attached was measured. The data were analyzed using one-way ANOVA followed by Scheffe's test and linear regression test. The results were as follows. 1. When the temperature was set at 150℃, 200℃, 250℃ and 300℃ on the digital display of System B HeatSource, the real temperature of the plugger at the 1㎜ point from the tip revealed 130.82±2.96℃, 158.00±5.26℃, 215.92±6.91℃ and 249.88±3.65℃ respectively. 2. The position of 8 ㎜ from the anatomical apex showed the highest temperature increase at each temperature settings and it was significantly higher than those of other positions (p<0.01). The temperature rise was constantly increased toward coronal portion from apex of the root. 3. The maximum temperature increase on the root surface was 2.37±0.09℃ at 150℃ setting, 3.11±0.12℃ at 200℃ setting, 3.93± 0.09℃ at 250℃ setting and 5.69± 0.15℃ at 300℃ setting. These results suggest that it be relatively kind to the supporting tissues of the root that the root canal is obturated using continuous wave of condensation technique at 150℃, 200℃, 250℃ and 300℃ temperature settings on digital display of System B HeatSource.

Thermocouple을 이용한 Buchanan Plugger 표면의 온도상승 분석

조진숙,황윤찬,김선호,황인남,최보영,정영진,정우남,오원만 전남대학교 치의학연구소 2003 구강과학 Vol.15 No.4

This study was performed to confirm the actual temperature rise on the surface of Buchanan plugger by evaluating the temperature rise on the surface of it, the peak temperature of pluggers of various size using thermocouple. The heat carrier system 'System B Heatsource' (Model 1005, Analytic Technologies, USA) and the Buchanan pluggers of F, FM, M and ML sizes are used for this study. The temperature was set to 200 which Dr. Buchanan's "Continuous wave of condensation" technique recommended on digital display and the power level on it was set to 10. The touch mode was used. Five thermocouples were placed in direct contact with the surface of each size of Buchanan's pluggers at 1 ㎜ increments from the tip to the 4 ㎜ length of shank. Each thermocouple was secured with cyanoacrylate adhesive and orthodontic resin block. The two wire leads of each thermocouple were connected to the appropriate channels of Data Logger. This was configured to simultaneously record input from the five thermocouples. The heat control spring was touched for 1, 2, 3, 4 and 5 seconds, and the temperature rise on the surface of the pluggers were measured at 1 sec intervals for more than 5 seconds with an accuracy of 0.01. Ten trials was determined for each plugger. The average of temperature rise and standard deviation was calculated for each size of plugger. The data were statistically analyzed by one-way ANOVA to determine their significance. The results as follows. 1. The position at which the temperature peaked was approximately at 1∼2㎜ far from the tip of Buchanan plugger (p<0.01). 2. The peak temperature was 215.25±2.28℃ in F plugger, 185.94±2.19℃ in FM plugger, 169.51±9.12℃ in M plugger, and 160.79±1.27℃ in ML plugger and the peak temperature was highest in F type and followed by, in descending order, FM type, M type. ML type showed the lowest peak temperature (p<0.01). This results suggest that the actual temperature on the surface of the pluggers does not correlate well with the temperature set on digital display. Heat concentrates around the tip. The larger plugger reveals lower temperature rise relatively.

고령자 남녀와 20대 남녀에 있어서 다양한 등속수축중 최대 모멘트의 비교

金智源(Ji-Won Kim),金相佑(Sang-Woo Kim),文基旭(Ki-Wook Moon),嚴光文(Gwang-Moon Eom),李泳揆(Young-Gyu Lee),南貞淑(Jung-Sook Nam),朴寬龍(Kwan-Yong Park),金耀翰(Yo-Han Kim),洪廷和(Jeong-Hwa Hong),朴炳奎(Bung-Kyu Park) 대한전기학회 2008 전기학회논문지 Vol.57 No.10

In this paper, we investigated the maximum ankle joint plantarflexion moment (MPM) of young and elderly subjects during various modes of isokinetic contractions with special interest in the elderly females who were reported to have higher fall rate than the elderly males. Subjects include the young subjects (14 males: 22.7±2.5yrs, 13 females: 20.5±1.3yrs) and the elderly subjects (17 males: 65.8±10.5yrs, 26 females: 71.4±5.2yrs). The MPM was normalized by each subject's body weight. The MPM of elderly females was the weakest among the groups, particularly, at the eccentric contractions. The male-to-female ratio of MPM was greater in the elderly than in the young and the young-to-elderly ratio of MPM was greater in female than in male, both during the eccentric contractions. The result suggests that the decreased muscle force per body weight, especially at the eccentric contraction, may be one reason for the more frequent fall of the elderly female than the elderly male.

공업화시대와 세계화시대의 국토개발전략 변화 : 신행정수도 건설과 관련하여

남영우 한국도시지리학회 2004 한국도시지리학회지 Vol.7 No.2

본 연구는 정부가 수도권의 과밀화를 해소하고 지방도시의 육성을 도모하여 국가 및 국토균형발전을 이루겠다는 명분하에 추진되고 있는 수도이전에 문제가 있음을 지적한 것이다. 한국경제의 고도성장을 견인해 온 지난 40년간의 국토개발전략은 성장거점전략에 기초한 집중투자로 지역격차가 발생하는 것은 필연이었다. 이 전략은 결과적으로 지역적 균열을 야기시켰고, 이에 대한 대응책으로 대두된 것이 공간통합정책이었다. 현재 한국 정부를 비롯한 개발도상국이 취하고 있는 공간통합은 등질공간화를 지향하는 공간통합인 것으로 간주된다. 세계화시대의 국토개발 패러다임은 균형적 공간의 지향으로부터 중층적 국토공간을 지향하는 정책으로 바뀌어 가고 있다. 따라서 필자는 본고를 통하여 선진국에서 용도폐기된 등질적 공간보다 결절적 공간통함으로 전환할 것을 정부당국에 제안하였다. This paper attempts to criticize the new capital relocation project by the government which is emphasizing balanced regional development and decentralization strategies out of the capital region. It reviewed that national development strategies for last forty years based upon the growth pole strategies have resulted in rapid economic growth in the bright side as well as regional disparities and regional fragmentation in the dark side. Spatial integration strategies have been pointed out as a kind of necessary solution against those problems for Korea as well as the developing countries towards more homogeneous space. The national development policies have been shifted from balanced space toward multi-layered space. It suggests that spatial integration strategies based on nodality concept should be more significant than ones based on homogeneity concept that were outdated in developed countries.

PMMA 물성제어를 위한 전산모사 및 실험(Ⅰ)

남대우,장영욱,강신춘 한양대학교 에너지·환경기술연구소 1997 에너지·環境技術論文集 Vol.3 No.-

원하는 PMMA의 전환율, 수평균중합도 및 분산도를 얻고자 회분식 중합반응기의 온도궤도를 결정하였다. 원하는 물성을 얻기 위하여 먼저 순간 수평균중합도 ??의 변화를 2개의 매개변수를 갖는 식으로 설정하고 이값과 반응메카니즘으로부터 구해지는 순간수평균중합도 ??의 차의제곱을 최소화하는 온도궤도를 계산하였다. 초기 개시제의 양, 분산도 및 초기 반응온도등이 온도궤도에 어떤 영향을 주는지 고찰하였으며 계산된 온도궤도에 외란을 주어서 이것이 최종물성에 미치는 영향을 고찰하여 적절한 ??을 선택하고자 하였다. ?? 형태는 초반에는 일정값을 유지하다가 후반에 완만하게 증가하도록 설정하는 것이 바람직하였다. In order to obtain the desired PMMA physical properties(conversion rate, number-average degree of polymerization and polydispersity), temperature-time profiles of a batch reactor were calculated. It was obtained by minimization of the square of the difference between instantaneous number-average degree of polymerization, ?? (two parameters guess function), and ??(from reaction mechanism). We found that the profile was influenced by the changes in the initiator loading amounts, polydispersity and initial reaction temperature. To get the suitable selection of ?? type, we introduced the disturbance to the profile which affect to the physical properties of polymer. It was found that for good physical properties of polymer the value of ?? need to be maintained at a point steadily in the initial stage and to be increased slightly thereafter.