Apoptosis and necroptosis‑inducing effects of arctigenin on nasal septum carcinoma RPMI‑2650 cells in 2D and 3D culture

Yoon‑Jin Lee,Kwan‑Sik Park,Byoung Joon Baek,Kyong‑Ae Lee,Sang‑Han Lee 대한독성 유전단백체 학회 2020 Molecular & cellular toxicology Vol.16 No.1

Backgrounds Arctigenin derived from the seeds of Arctium lappa Linnaeus is known as an anticancer drug candidate by targeting various pathways involved in anticancer therapy. Methods Using 2D monolayer and 3D spheroid culture systems in nasal septum carcinoma RPMI-2650 cells, the effects of arctigenin and dexamethasone on cell viability, ROS levels, ATP level, mitochondrial function, apoptosis and necroptosis were examined. Results The combination treatment of both compounds induced strong cytotoxicity, accompanied by increases of sub-G0/ G1 peak, annexin V-PE-positive cells, and ROS levels, loss of mitochondrial membrane potential, and decrease of cellular ATP content. These changes were observed as simultaneous induction of DNA damage, apoptosis, and necroptosis. A series of changes by arctigenin and dexamethasone were efficiently restored by decreasing ROS levels or supplementing ATP. Treatment of 3D spheroids with arctigenin and dexamethasone decreased cell viability in the spheroids, but it was slightly resistant than cells under 2D conditions. In addition, this phenomenon was accompanied by an increase in mediators for both apoptosis and necroptosis. Conclusion Results of this study suggest that the apoptosis and necroptosis-inducing effects of arctigenin are associated with ATP depletion due to oxidative mitochondrial dysfunction.

두가지 혈류 유발방법에 의한 새로운 심폐소생술(이중 혈류 유발 심폐소생술)장치의 개발

황성오,김현,조준휘,오범진,임종천,최경훈,윤정한,이승환,김영식,이강현,이윤선 大韓應急醫學會 1999 대한응급의학회지 Vol.10 No.2

Background: There have been many efforts to augment blood flow during cardiopulmonary resuscitation. These efforts have focused on maximizing the effect of cardiac pump or thoracic pump alone. However, considering that the heart is the biggest blood reservoir and increase of intrathoracic pressure can generate blood flow, simultaneous exploitation of both mechanisms may have synergistic effect. We hypothesized that simultaneous chest constriction in addition to sternal compression by standard CPR may have additive hemodynamic effects by preventing deformation of the chest and increase of intrathoracic pressure. Methods and results: we built a new mechanical device to perform compression and thoracic constriction simultaneously. The device consists of two main elements. Piston in the center is to depress the sternum. Strap is to constrict the thorax circumferentially. Strap is attached to both sides of the piston. When the piston is pushed down, it depresses the sternum and pulls on the thoracic strap. To determine strap width to produce optimal hemodynamic effect, we measured hemodynamic parameters with variable widths of strap in two dogs after induction of ventricular fibrillation. Result of the experiment showed that 10cm wide strap was determined to be most effective. We also determined optimal depth of compression to produce maximal hemodynamic effect with animal experiments using two dogs. Animal experiments showed that the highest aortic pressure could be generated when the stemum was depressed to 5 cm. Cardiopulmonary resusciation using a new device could generate higher systolic aortic pressure, coronary perfusion pressure and end-tidal carbon dioxide tension in comparison with standard cardiopulmonary resuscitation in a pilot animal study using two dogs. Conclusion: New cardiopulmonary resuscitation method using a mechanical device designed by us could perform sternal compression and simultaneous thoracic constriction, and generate better hemodynamic effects than standard cardiopulmonary resuscitation in pilot animal experiments.

염기성추출제에 의한 중금속분리에 관한 연구(Ⅰ)

이진우,김영일,장윤식 동의공업대학 2000 論文集 Vol.26 No.1

In the recent methods of water treatment and recycling a technology using membrane is practically developed and spotlighted. Therefore in the study it is investigated about the method to separate Ni( D) by basic extactant in the addition to using hollow fiber membrane which is cheap and easy to handle in laboratories, namely by using TDA as extactant with hydrophobic hollow fiber membrane. In the given concentration range of hydrochloric acid, the long-chain aliphatic amines extractants has high distribution ratio for Ni(Ⅱ). The mass transfer speed of extraction is faster 3-5 times than that of stripping and is depends on the existence of membrane resistance.

세포질내 정자주입법(ICSI)에 있어서 정자흡입 및 난자내 주입방법에 관한 연구

이택후,김항진,송건호,김대근,전상식,박윤규,서태광,전병균,류은경,이은숙,문진수,김광철 경북대학교 의학연구소 2000 경북대학교병원의학연구소논문집 Vol.4 No.1

Study on Method of Sperm Aspiration and Injection into an Oocyte in Intracytoplasmic Sperm Injection(ICSI) Immobilization of spermatozoa prior to intracytoplasmic sperm iniection(ICSI) sometimes results in crooked tail and this makes it difficult to aspirate sperm into an injection pipette tail first. Head-first sperm aspiration into an injection pipette avoid this problem due to the bigger size of the sperm head. The effect of head or tail-first sperm injection into an oocyte on fertilization cleavage, percentage of grade I embryos and development to blastocyst stage in ICSI program has been studied. A single living immobilized spermatozoa from oligoasthenozoospermic patient was injected into an oocyte head-first or tail-first according to the treatment. Eighteen hours after microinjection, oocytes ware inspected for survival and fertilization Fertilized oocytes with two pronuclei were cultured in 30μl drop of mHTF supplemented with 10% heat-inactivated follicular fluid(FF) at 37℃. On day 2. embryo transfer was performed with cleaved embryos. The remaining 2-8 cell stage embryos were co-cultured with BRL cells in mHTF + 10% FF for 72 hours and the developmental stage was observed. The data were analyzed by Analysis of Variance. A total of 164 oocytes from 36 cycles were assigned to earth treatment and ICSI was performed(88 head-first, tail-first). The rates of normal fertilization were 81.8% and 76.3% for head-first and tail-first, respectively. Of the fertilized oocytes, the percentage of cleaved embryos and the percentage of grade 1 embryo among cleaved embryos were 88.9% and 68.8%, 93.1% and 74.1% for head-first and tail-first, respectively. Of the 2-8 cell embryos cultured, 44.4%(16/36) and 50.0%(10/20) for head first and tail first, respectively developed to blastocyst stage. There were no differences in fertilization, cleavage, rates of grade 1 embryos, and development to blastocyst stage. In conclusion, head-first or tail-first sperm injection into an oocyte in ICSI program does not affect fertilization and subsequent embryo development to blastocyst stage in vitro.

임신 40주와 출산 후 6주에 있는 20대 임산부 보행의 역학적 특성 비교

윤희중,문동안,정남주,금명숙,이경식,유실,김영란,한윤수 한국운동역학회 2000 한국운동역학회지 Vol.10 No.1

본 연구는 임신 40주와 출산후 6주간에 있는 임산부의 보행 동작의 특정을 규명함으로써 이와 관련된 연구자들에게 기초자료를 제공하고자 실시하였다. 이를 위해 임신 4주에 있는 임산부를 대상으로 1차 실험을 실시하였으며 동일한 대상자를 출산후 6주에 2차로 실험하여 자료를 수집하였다. 디지타이징 시 오차를 최소화하고 인체관절점의 분별을 위해 21개의 반사마커를 부착하였다. 10m의 보행주로를 걷는 동안 두 대의 비디오카메라를 이용하여60Hz로 자료를 수집하였으며 동시에 100Hz 지면반력자료를 수집하였다.수집되어진 자료는 DLT 방법을 사용하여 분석하였으며 이의 분석에 Kwon3d 프로그램을 활용하였다. 분석결과 다음과 같은 결론을 얻었다. 1. 임신 40주와 출산 후 6주의 보행 시 지지시간과 스윙시간의 비율이 다르게 나타났으며 보폭과 보간, 활보장은 임신 40주에서 더 큰 값을 보였다. 상체 전경각 역시 임신 40주에서 더 큰 값을 보였다. 힙관절, 무릎관절, 발목관절각도는 S1이 출산후 6주에서 큰 값을 보인반면 S2는 출산전후에 큰 변화를 보이지 않다. 2. 상하지면반력의 경우 FP1과 FP2는 임신 40주보다는 출산 6주에서 큰값을 보였지만 FP3는 임신 40주에서 보다 큰값을 보이고 있었다. 전후지면반력의 경우 출산전과 후 모두 Fy2에서 보다 큰 값을 보이고 있었다. This Study was to investigate kinematical characteristic comparison of the gait pregnant 40weeks and after delivery 6weeks 20´s women and provide the basic data. To accomplish this study, in the first, carry out an experiment with the pregnant women in the pregnant 40weeks on the videotape, and than the second, make an experiment with the kinematic data. Kinematic data were filtered with a low-pass, fourth-order Butterworth filter with an effective cut off frequency of 6Hz. The conclusions were drawn as follows; 1. Floor contact Periods(stance and swing rate) were differed from before and after the delivery and a pregnant 40 weeks was greater than after delivery 6 weeks in the step, width, stride. Also, a pregnant 40 weeks was greater than after delivery 6 weeks in the front angular. And the other angular components were represented similar pattern. 2. In the vertical load, delivery 6 weeks was grater than a pregnant 40 weeks in the FP1(first peak) and FP2(valley). And FP3(second peak)was represent that a pregnant 40 weeks was greater than delivery 6 weeks. Also, in the horizontal shear, Fy2(progressional force)was greater than Fy1(breaking force) about time of the delivery.

카올린으로부터 질화알루미늄 분말 합성

이윤복,서기원,류봉기,김광호,박희찬,장윤식 釜山大學校生産技術硏究所 1996 生産技術硏究所論文集 Vol.50 No.-

카올린으로 부터 수화염기성황산알루미늄을 제조하고, 이것을 탄소열환원질화하여 질화알미늄 분말을 합성하였다. 수화염기성황산알루미늄은 카올린으로 부터 제조된 수화황산알루미나 0.5M 및 요소 5M인 용액으로 부터 얻은 것이 가장 미세하였다. 탄소열환원질화법으로 질화알미늄을 합성할 때 활성화탄과 염기성황산알루미늄의 질량비가 2인 조성이 가장 적합하였으며, 이 때 얻어진 질화알미늄은 0.3-1㎛의 submicron급 분말이었다. Aluminum nitride powder was synthesized by carbothermal reduction-nirtridation using kaolin- derived hydrated basic aluminum sulfate. The hydrated basic aluminum sulfate powder produced from the solution of 0.5M hydrated aluminum sulfate and 5M urea showed very fine particles. The aluminum nitride showed the submicron powder of 0.3-1㎛ in the optimum condition with 2.0-weight ratio of activated charcol to hydrated basic aluminum sulfate.

관상동맥 스텐트 내 재협착의 발생에 미치는 임상적 관동맥 조영술적 요인들

윤혁준,김기식,박형섭,이영수,현대우,한성욱,허승호,김윤년,김권배,박남희,원경숙 대한순환기학회 2003 Korean Circulation Journal Vol.33 No.12

2-Thenoyltrifluoroacetone에 의한 구리의 용매 추출에서 Tri-n-Octylamine 상승작용이 추출속도에 미치는 영향

이동선,장윤식,장진규 동의공업대학 1998 論文集 Vol.24 No.1

The extraction of Copper from aqueous perchloric add into a solution of 2-Thenoyltrifluoroacetone(TTA) in benzene is known to be very slow. The system does not reach equilibrium within a practical contact time of the two phase. The addition of tri-n-octylamine(TOA) and a mixture tri-n-octylamine with chloride ion was found to increase the rate considerably from the results of a detailed investigation, the reason for this effect is considered to be the replacement of a slow step, the direct formation of the Cu(TTA)_(2) in the aqueous phase, by a series of fast reactions to the formation of a Copper-tri-n-Octylamine oxide species in the aqueous phase, followed by its extraction into the organic phase and its reaction with TTA in the organic phase.

2-Bromoacetylnaphthalene을 螢光誘導體化劑로 利用한 Alclofenac의 HPLC 分析에 관한 硏究

李允中,曺正吉,河仁植,金容熙 成均館大學校 科學技術硏究所 1990 論文集 Vol.41 No.1

A simple, rapid and high sensitive method for determination of alclofenac is described. 2-Bromoacetylnaphthalene was used as the pre-column fluorescent derivatizing reagent for high performance liquid chromatography. Alclofenac was derivatized quantitatively into fluorescent compound by reacting with 2-bromoacetylnaphthalene in the presence of 18-crown-6 ether in acetonitrile. The optimum conditions for the derivatization such as concentration of KOH, 18-crown-6 and 2-bromoacetylnaphthalene, reaction temperature and reaction time were investigated. The structure of alcolofenac derivative was confirmed from IR, NMR and mass spectra. The fluorescence properties of alclofenac derivative were examined. The derivative was separated on a reverse phase column (Lichrosorb RP-8) in isocratid elution mode using the secondary mixture of acetonitrile and water as the mobile phase. The effluent was monitored by fluorometer.(Ex. 303, Em. 418 nm). The calibration plots for the peak area versus concentration of alclofenac observed to be linear(r =0.999).

염기성추출제에 의한 중금속분리에 관한 연구(Ⅱ)

이진우,김영일,장윤식 동의공업대학 2001 論文集 Vol.27 No.1

The liquid-liquid extractions by use of microporous hollow fiber membrane modules are fast compared with conventional extraction equipment. Because they have a large surface area per volume. The extractant and feed can be contacted at high speed in the module, there are no problems with flooding, loading and channeling. In this paper, it was investigated the extraction and stripping efficiency for liquid-liquid extraction of the Ni(Ⅱ) from dilute acidic aqueous solution into TDA(tri-n-dodecylamine) as extractant by using the hydrophobic hollow fiber module. We also determined the rate controlling step for mass transfer in the module. The mass transfer speed of extraction of individual process is similar to that of series of extraction-stripping process. In case of series of extraction-stripping process, stripping speed of heavy metal is very low at initial stage of reaction because the concentration of extracted heavy metal at initial stage of reaction is very low and it is difficult for the heavy metal to contact with stripping solution. The rate controlling step of hydrophobic membrane is solute diffusion in tube side.