SHS 공정에 의해 제조된 Mo_xW_1-xSi₂ 발열체의 열화메커니즘

이동원,이상헌,김용남,이성철,구상모,오종민,Lee, Dong-Won,Lee, Sang-Hun,Kim, Yong-Nam,Lee, Sung-Chul,Koo, Sang-Mo,Oh, Jong-Min 한국전기전자재료학회 2017 전기전자재료학회논문지 Vol.30 No.10

The degradation mechanism of $Mo_xW_{1-x}Si_2$ ultrahigh-temperature heating elements fabricated by self-propagating high-temperature synthesiswas investigated. The $Mo_xW_{1-x}Si_2$ specimens (with and without post-annealing) were subjected to ADTs (accelerated degradation tests) at temperatures up to $1,700^{\circ}C$ at heating rates of 3, 4, 5, 7, and $14^{\circ}C/min$. The surface loads of all the specimen heaters were increased with the increase in the target temperature. For the $Mo_xW_{1-x}Si_2$ specimens without annealing, many pores and secondary-phase particles were observed in the microstructure; the surface load increased to $23.9W/cm^2$ at $1,700^{\circ}C$, while the bending strength drastically reduced to 242 MPa. In contrast, the $Mo_xW_{1-x}Si_2$ specimens after post-annealing retained $single-Mo_xW_{1-x}Si_2$ phases and showed superior durability after the ADT. Consequently, it is thought that the formation of microcracks and coarse secondary phases during the ADT are the main causes for the degraded performance of the $Mo_xW_{1-x}Si_2$ heating elements without post-annealing.

SHS 공정으로 제조된 Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si₂ 발열체의 가속수명시험과 고장분석

이동원(Dong-Won Lee),이상헌(Sang-Hun Lee),김용남(Yong-Nam Kim),이희수(Heesoo Lee),이성철(Sung-Chul Lee),구상모(Sang-Mo Koo),오종민(Jong-Min Oh) 한국전기전자학회 2017 전기전자학회논문지 Vol.21 No.3

고온자전합성과 후열처리 공정으로 MoxW1-xSi₂ 발열체를 제조하였다. MoxW1-xSi₂ 발열체의 신뢰성을 검증하기 위해 가속수명시험을 수행하였으며, 수명시간을 Minitab 프로그램으로 추정하였다. 또한, 가속수명시험 후의 MoxW1-xSi₂ 발열체의 고장분석을 전기적과 구조적 특성으로부터 수행하였다. 그 결과, MoxW1-xSi₂ 발열체의 지배적인 고장 유형은 발열체 내부의 크랙 형성과 SiO₂ 보호층의 박리임을 확인하였다. MoxW1-xSi₂ heaters were fabricated by self-propagating high-temperature synthesis (SHS) process and post sintering process. To validate the reliability of the MoxW1-xSi₂ heaters, the accelerated life test (ALT) was conducted, and then lifetime to MoxW1-xSi₂ heaters was estimated by using Minitab programs. Also, the failure analysis of MoxW1-xSi₂ heaters after ALT was performed through electrical and structural properties. As the results, it was confirmed that the dominant failure mode of MoxW1-xSi₂ heaters is the crack formation in heaters and the delamination of protective SiO₂ layers.

Productivity Loss of Rheumatoid Arthritis Patients according to the Their Stages of the Disease Activity Score

( Sang-Cheol Bae ),( Jin-Hye Cha ),( Jung-Yoon Choe ),( Sung Jae Choi ),( Soo-Kyung Cho ),( Won-Tae Chung ),( Chung-Il Joung ),( Young-Ok Jung ),( Young Mo Kang ),( Dong-Wook Kim ),( Jinseok Kim ),( Y 대한류마티스학회 2018 대한류마티스학회지 Vol.25 No.2

Objective. Productivity loss was compared by 3-stage of disease activity and associations between higher disease activity and high productivity loss were identified. Methods. Data were extracted from Rheumatoid Arthritis (RA) Patient-reported Outcomes Research, which enrolled 2,000 RA patients (>20-year) on disease-modifying-antirheumatic-drugs (DMARDs) (≥ 6-month) from December 2012 to June 2013. This included 1,457 RA patients with the disease activity score (DAS-28-ESR) in their medical charts. Productivity loss in time and indirect cost was estimated using The World Health Organization Health and Work Performance Questionnaire (HPQ). Baseline characteristics and productivity loss outcomes were compared according to DAS-28-ESR groups. Results. 84.4% were females, 54.2% had low DAS-28-ESR (<3.2), and 38.2% and 7.6% had moderate (3.2∼5.1) and high DAS-28-ESR (>5.1). Patients with moderate to high DAS-28-ESR had higher lost productivity time (LPT) and monthly costs of LPT than those with low DAS-28-ESR (time in hours: 110.0±58.4 vs. 132.4±57.2 vs. 71.5±52.0, p<0.0001; monthly costs of LPT in 1,000 Korean won: 1,097±607 vs. 1,302±554 vs. 741±531, p<0.0001). Multiple regression analyses revealed significant associations with high LPT in high (adjusted odds ratio [OR]=3.87, 95% confidence interval [CI]: 2.18∼6.87) and moderate DAS-28-ESR (adjusted OR=1.88, 95% CI: 1.41∼2.52) compared to low DAS-28-ESR. In addition, positive associations with high monthly costs of LPT were observed in high (adjusted OR=3.45, 95% CI: 1.98∼5.99) and moderate DAS-28-ESR (adjusted OR=1.93, 95% CI: 1.43∼2.54) compared to low DAS-28-ESR. Conclusion. Timely therapeutic strategies should be taken into consideration given that the RA patients with moderate to high DAS-28-ESR showed strong associations with high productivity loss for effective management of RA. (J Rheum Dis 2018;25:122-130)

통풍형 방음벽 개발 및 적용에 관한 연구

윤제원(Je-Won Yoon),김영찬(Young-Chan Kim),김금모(Keum-Mo Kim),장강석(Kang-Seok Jang),구본성(Bon-Sung Ku),엄주용(Joo-Yong Eom) 한국소음진동공학회 2011 한국소음진동공학회 학술대회논문집 Vol.2011 No.10

The purpose of this study is to develop an air-passing soundproofing panel with more improved structure to reduce the CO2 emission and installation cost. To reduce the emission of CO2 ; it is suggested to choose low CO2 emission material relative to the aluminum and to reduce the materials by developing a specially designed air-passing soundproofing panel structure. First of all, we performed the flow analysis to predict the wind pressure according to the open angle of the air-passing soundproofing panel and the noise level analysis at the receiver point. To verify the simulation, a prototype of the soundproofing panel was made. The flow test in the wind tunnel and load test were performed. The economic evaluation for the installation of the air-passing soundproofing panel was performed and specifications of the installation was prepared. As the results of this research, it was verified that the wind load was reduced about 40% to that of the conventional one at 25m/s wind speed in the wind tunnel test. By applying the 4m span soundproofing wall with air-passing soundproofing panel and under the cost of 250 thousand won/m2 instead of the conventional 2m span panel, the installation cost will always be lowered than the conventional one in the combination of (60:40~50:50) conventional to air-passing soundproofing panel from the economic evaluation. The 20% reduction of CO2 was found by changing the 50% of aluminum soundproof panel to air-passing soundproofing panel.

Effect of post annealing on the microstructure, mechanical properties, and failure of Mo_xW_1-xSi₂ heaters produced by self-propagating high-temperature synthesis

Cho, Myung-Yeon,Lee, Sung-Chul,Park, Chulhwan,Lee, Daeseok,Koo, Sang-Mo,Moon, Kyoung-Sook,Lee, Dong-Won,Oh, Jong-Min Elsevier 2019 INTERMETALLICS Vol.110 No.-

<P><B>Abstract</B></P> <P>High-performance tungsten molybdenum disilicide (Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB>) heating elements were prepared using a self-propagating high temperature synthesis process. The effect of post annealing on the degradation behavior of the alloy was experimentally investigated. Increasing the attrition milling time up to 20 min during powder preparation resulted in Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB> heaters with the highest density, which increased the fracture strength compared to samples with shorter attrition times. Such samples were annealed and evaluated as heating elements using accelerated degradation tests and failure analysis in order to compare their structural characteristics and flexural strength with as-fabricated samples. The annealed Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB> heater showed a relatively dense structure with few pores and no secondary phases, apart from a SiO<SUB>2</SUB> layer. This favorable structure prevented bubble formation, which can result in fracturing of the heater, as revealed by evaluation at high temperatures with various heating rates. The flexural strength of the annealed specimen was 2.5-times higher than that of the as-fabricated specimen, which was attributed to removal of secondary phases during annealing. Failure time and surface load analyses were used to investigate the fracture mechanism of the Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB> heaters in detail at 1790 °C by quantifying bubble formation and the presence of secondary phases.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Self-propagating high temperature synthesis of Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB> heaters demonstrated. </LI> <LI> Post-annealed Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB> heaters were highly dense, with good flexural strength. </LI> <LI> Bubble formation (the main cause of fracture) suppressed at ultra-high temperature (above 1700 °C). </LI> <LI> Surface load, failure time, and bubble formation used to study fracture mechanisms. </LI> </UL> </P>

자동착유시스템 설치농가의 설치 후 만족도에 관한 실태조사

기광석,김종형,정영훈,김윤호,박성재,김상범,이왕식,이현준,조원모,백광수,김현섭,권응기,김완영,여준모,Ki, Kwang-Seok,Kim, Jong-Hyeong,Jeong, Young-Hun,Kim, Yun-Ho,Park, Sung-Jai,Kim, Sang-Bum,Lee, Wang-Shik,Lee, Hyun-June,Cho, Won-Mo,Baek, Kwang- 한국축산환경학회 2011 축산시설환경학회지 Vol.17 No.1

본 시험은 국내에 도입되기 시작한 AMS에 대하여 설치 동기, 설치 후 우유생산량과우유품질, AMS 설치계기 및 설치 후 만족도, AMS 운영상 애로점 및 건의사항 등을 조사 분석하였다. 설치 계기가 무엇인가에 대한 응답비율은 노동력 부족 44%, 체험목장으로 전환 25%, 소들의 고능력화에 대응 19% 순이었으며 기타 6%였다. AMS 설치농가의 사육경력은 평균 24.9년, 평균 연령은 53.2세로 나타났으며 가족노동력만으로 경영하는 목장이 조사농가의 38%, 고용+자가노동력 형태의 목장이 63%로 나타났다. 목장의 산유능력은 두당 평균 유량은 1일 $30.9{\ell}$, 평균 유지율 3.9%, 세균수는 9.1천개/$m{\ell}$ 수준이었다. 후계자 육성에 대한 질문에 매우 그렇다라고 응답한 비율은 68%였으며, 보통 18%, 아니다와 매우 아니다라고 응답한 비율은 18%로 나타났다. 시스템 운영현황 및 애로사항을 파악하기 위하여 AMS의 프로그램 주운영자에 대한 질문에 본인 44%, 부인 6%, 자녀 또는 후계자사람이 44%, 기타 6%나 되었다. AMS 운영상 가장 어려운 점에 대한 조사결과, 기기 작동 및 복잡한 프로그램 운영이 각각 31%로 가장 많았다. 그 외 기계 에러 및 고장에 대한 애로사항이 25%이였다. 도태원인에 대하여 유방염 28%, 번식장애 20%, 발굽질환 19%, AMS에 부적합한 유두 배열 12%, 분만 후 대사성질병 7%, 노산 등 기타 14%였다. 시스템 설치 후 유지보수 계약 체결유무 및 비용에 대하여 유지보수 계약 56%, 유지 보수 계약 미체결 44%이었다. 유지보수 계약 평균 계약비용은 연간 658만원 정도였다. 시스템 설치 후 항목별 만족도에 대하여 5점 만점에 3.9점이었으며, 노동력 절감 3.7점, 업체의 A/S 3.6점, 산유량 증가 3.2점, 원유의 체세포 수 저감 2.8점이었다. 시스템 설치 시 고려사항 및 건의사항에 대하여 고가의 장비를 효율적으로 사용하기 위하여 젖소의 유방과 유두 배열이 적합하도록 젖소를 선발하는 것, 시스템을 운용할 수 있는 능력, 적합한 환경, 재정적 능력과 부지 확보, 지속적인 관찰 등이 권장되어야 할 것으로 나타났으며, 설치 업체에 대해서는 컨설팅이 체계화될 필요가 가장 높게 나타났으며 이어서 보다 저렴한 설치와 서비스의 체계화를 요구하는 결과를 보였다. The present survey was conducted to provide basic information on automatic milking system (AMS) in relation to purchase motive, milk yield and quality, customer satisfaction, difficulties of operation and customer suggestions, etc. Purchase motives of AMS were insufficient labor (44%), planning of dairy experience farm (25%), better performance of high yield cows (19%) and others (6%), respectively. Average cow performance after using AMS was 30.9l/d for milk yield, 3.9% for milk fat, 9,100/ml for bacterial counts. Sixty-eight percentage of respondents were very positive in response to AMS use for their successors but 18% were negative. The AMS operators were owner (44%), successor (44%), wife (6%) and company worker (6%), respectively. The most difficulty (31%) in using AMS was operating the system and complicated program manual. The rate of response to system error and breakdown was 25%. The reasons for culling cow after using AMS were mastitis (28%), reproduction failure (19%), incorrect teat placement (12%), metabolic disease (7%) and others (14%), respectively. Fifty-six percentages of the respondents made AMS maintenance contract and 44% did not. Average annual cost of the maintenance contract was 6,580,000 won. Average score for AMS satisfaction measurement (1 to 5 range) was 3.2 with decrease of labor cost 3.7, company A/S 3.6, increase of milk yield 3.2 and decrease of somatic cell count 2.8, respectively. Suggestions for the higher efficiency in using AMS were selecting cows with correct udder shape and teat placement, proper environment, capital and land, and attitude for continuous observation. Systematic consulting was highly required for AMS companies followed by low cost for AMS setup and systematization of A/S.

Effect and mechanism of Magnolia officinalis pharmacopuncture for treating localized fat via network pharmacology and experimental study

Won Jun Choi,Mi Hye Kim,Nayoung Park,Jae Yoon Chung,Sang Jun Park,Woong Mo Yang 한국한의학연구원 2023 Integrative Medicine Research Vol.12 No.2

Background: Recently, for various reasons, the need for non-invasive treatment for localized fat has emerged. This study confirmed whether Magnolia officinalis (MO) pharmacopuncture reduces localized fat by promoting lipolysis and inhibiting adipogenesis. Methods: The network was built using genes related to the active compound of MO and the mode of action of MO was predicted by the functional enrichment analysis. Based on the result from network analysis, 100 µL of 2 mg/mL MO pharmacopuncture was injected into the inguinal fat pad for 6 weeks in obese C57BL/6J mice. Normal saline was injected into the right-side inguinal fat pad as a self-control. Results: It was expected that the AMP-activated protein kinase (AMPK) signaling pathway would be affected by the MO Network. MO pharmacopuncture reduced the weight and size of inguinal fat in HFD-induced obese mice. The phosphorylation of AMPK along with the increases of lipases was significantly increased by MO injection. Also, the expression levels of fatty acid synthesize-related mediators were suppressed by MO injection. Conclusion: Our results demonstrated that MO pharmacopuncture promoted the expression of AMPK, which has beneficial effects on activation of lipolysis and inhibition of lipogenesis. Pharmacopuncture of MO can be a non-surgical alternative therapy in the treatment of local fat tissue.

한국산 자연겨우살이 렉틴과 배양겨우살이 캘러스 렉틴의 세포독성 및 사이토카인 유도의 비교

Sung Oh,Mo Koo, Seong,Seong Mi Ji,Han Byul Noh,Chang Won Choi 한국약용작물학회 2016 한국약용작물학술대회 발표집 Vol.2016 No.05

Background : Lectins were individually isolated from natural Korean mistletoe (nML) and its in vitro cultured calli (cML). Both of the lectins showed the difference in bioactivities such as cytotoxicity and cytokine induction. Methods and Results : Target cells (1 x 104 cells/well) were seeded independently into each well of a 96-well culture plate and incubated with different concentrations of each lectin. Survivability of target cells was determined by CCK-8 kit (Sigma, USA) according to manufacturer’s directions. The nML showed 46, 34 and 5.5 times stronger than cML in cytotoxicity (IC50) to human melanoma cell line (SK-MEL-28), human carcinoma cell line (NCI-H1650) and murine macrophage (RAW 264.7), respectively. In addition, respective lectins directly stimulated macrophage RAW 264.7 but they showed the difference in enhanced productivity of some inflammatory cytokines. Compared with cML, the nML induced both TNF-α and IL-1β at its low concentration. Administration of two kinds of lectins (10-1000 μ g/kg body weight) to ICR mouse did not show any significant changes on the level of alanine transaminase (ALT), glutamate-oxaloacetic transaminase (GOT) and blood urea nitrogen (BUN) in sera. Conclusion : From the above results, we may suggest that nML and cML showed differences in cytotoxic effects and cytokine production due to the difference in amounts from sources.

Quantification of minerals composing raw and acid-treated clays from lithium-bearing boron deposits in Turkey

Won-jong Lee(이원종),Chul-min Chon(전철민),Soh-joung Yoon(윤소정),Bum-han Lee(이범한),Gill-jae Lee(이길재),Murat Cicek,Chul-ho Heo(허철호),Sang-mo Koh(고상모) 한국암석학회 2016 한국암석학회 학술발표회 논문집 Vol.2016 No.5

Evaluation of preservative penetration using image analysis

( Sung Mo Kang ),( Myoung Won Cho ),( Seung Hun Shin ),( Doo Jin Jung ),( Ja Oon Koo ) 韓國木材工學會 2005 한국목재공학회 학술발표논문집 Vol.2005 No.-