Continuous Conversion of Rice Starch Hydrolysate to 2-keto-D-gluconic Acid by Arthrobacter globiformis C224

Wen-Hua Teng,Wen-Jing Sun,Bin Yu,Fengjie Cui,Jing-Ya Qian,Jingze Liu,Liang Wang,Xiang-Hui Qi,Hua Wei 한국생물공학회 2013 Biotechnology and Bioprocess Engineering Vol.18 No.4

A continuous conversion process of rice starch hydrolysate to 2-keto-D-gluconic acid (2KGA) by Arthrobacter globiformis C224 was developed. Its feasibility for industrial application was also evaluated. Results showed that the initial cell concentration exceeding 1.25 g/L met the continuous 2KGA production at a stable dilution rate and media composition, while the dilution rate and feeding glucose concentration had a significant effect on 2KGA production performance. The optimal operating parameters were obtained as: 0.090/h of dilution rate and 171.0 g/L of feeding glucose concentration. Under these conditions, the steady state had a produced 2KGA concentration of 124.74 g/L, average volumetric productivity of 11.23 g/L/h,and yield of 0.97 g/g. In conclusion, continuous 2KGA production by the A. globiformis C224 strain would be a superior industrial process for the production of 2KGA in terms of its high 2KGA productivity and yield.

Blue organic light-emitting diodes with 2-methyl-9,10- bis(naphthalen-2-yl)anthracene as hole transport and emitting layer and the impedance spectroscopy analysis

Xiao-Wen Zhang,Bing-Jie Mo,Li-Ming Liu,Hong-Hang Wang,Dan-Teng Chang,Ji-Wen Xu,Hua Wang,Bin Wei 한국물리학회 2014 Current Applied Physics Vol.14 No.11

2-methyl-9,10-bis(naphthalen-2-yl)anthracene (MADN) based fluorescent blue organic light-emitting diodes (OLEDs) are demonstrated. With MADN as emitting layer, experiments indicate that thick MADN (40e60 nm) is preferable for constructing efficient blue OLED. With MADN as hole-transport and emitting layer and tris(8-hydroxy-quinolinato)aluminium (Alq3) as electron-transport layer, the OLED electroluminescent characteristics show a mixture emission of MADN and Alq3 with Commission Internationale d'Eclairage (CIE) color coordinates of (0.25, 0.34), indicating feasible hole transporting in MADN. Using 4,7-diphenyl-1,10-phenanthroline (BPhen) replacing Alq3 as electron-transport layer, the OLED shows deep blue emission with a maximum luminous efficiency of 4.8 cd/A and CIE color coordinates of (0.16, 0.09). The hole transport characteristics of MADN are further clarified by constructing hole-only device and performing impedance spectroscopy analysis. The results indicate that MADN shows superior hole-transport ability which is almost comparable to typical hole-transport material of N,N0-bis(naphthalen-1-yl)-N,N0-bis(phenyl)-benzidine (NPB), suggesting a promising application for constructing efficient blue OLED with integrated hole-transport layer and emitting layer.

A Group Decision Model for Selecting Facility Layout Alternatives

Lin, Shui-Shun,Chiou, Wen-Chih,Lee, Ron-Hua,Perng, Chyung,Tsai, Jen-Teng Korean Institute of Industrial Engineers 2005 Industrial Engineeering & Management Systems Vol.4 No.1

Facility layout problems (FLP) are usually treated as design problems. Lack of systematic and objective tools to compare design alternatives results in decision-making to be dominated by the experiences or preferences of designers or managers. To increase objectivity and effectiveness of decision-making in facility layout selections, a decision support model is necessary. We proposed a decision model, which regards the FLP as a multi-attribute decision making (MADM) problem. We identify sets of attributes crucial to layout selections, quantitative indices for attributes, and methods of ranking alternatives. For a requested facility layout design, many alternatives could be developed. The enormous alternatives, various attributes, and comparison of assigned qualitative values to each attribute, form a complicated decision problem. To treat facility layout selection problems as a MADM problem, we used the linear assignment method to rank before selecting those high ranks as candidates. We modelled the application of the Nemawashi process to simulate the group decision-making procedure and help efficiently achieve agreement. The electronics manufacturing service (EMS) industry has frequent and costly facility layout modifications. Our models are helpful to them. We use an electronics manufacturing service company to illustrate the decision-making process of our models.

A Group Decision Model for Selecting Facility Layout Alternatives

Shui-Shun Lin,Wen-Chih Chiou,Ron-Hua Lee,Chyung Perng,Jen-teng Tsai 대한산업공학회 2005 Industrial Engineeering & Management Systems Vol.4 No.1

Pretreatment with the Total Flavone Glycosides of Flos Abelmoschus manihot and Hyperoside Prevents Glomerular Podocyte Apoptosis in Streptozotocin-Induced Diabetic Nephropathy

Lei Zhou,Xiao-Fei An,Shi-Chao Teng,Jing-Shun Liu,Wen-Bin Shang,Ai-Hua Zhang,Yang-Gang Yuan,Jiang-Yi Yu 한국식품영양과학회 2012 Journal of medicinal food Vol.15 No.5

Diabetic nephropathy (DN) is an important diabetic complication, and podocyte apoptosis plays a critical role in the development of DN. In the present study, we examined the preventive effect of the total flavone glycosides of Flos Abelmoschus manihot (TFA) on urinary microalbumin and glomerular podocyte apoptosis in experimental DN rats. The preliminary oral administration of TFA (200 mg/kg/day) for 24 weeks significantly decreased the urinary microalbumin to creatinine ratio and 24-h urinary total protein in streptozotocin-induced DN rats. Terminal deoxynucleotidyl transferasemediated dUTP nick end-labeling assay indicated glomerular cell apoptosis in DN rats was significantly improved by pretreatment with TFA. Furthermore, fluorescence-activated cell sorting and Hoechst 33342 staining suggested preincubation with hyperoside (50 and 200 lg/mL), the major active constituent of TFA, could significantly mitigate cultured podocyte apoptosis induced by the advanced glycation end-products (AGEs). Western blot analysis showed that increased caspase-3 and caspase-8 expressions induced by AGEs were also inhibited by pretreatment with hyperoside at both doses. Our results demonstrate that TFA pretreatment can decrease urinary albumin excretion in early-stage DN, which might be accomplished by preventing renal damage and podocyte apoptosis.

Heavy concrete shielding properties for carbon therapy

Jin-Long Wang,Jiade J Lu,Da-Jun Ding,Wen-Hua Jiang,Ya-Dong Li,Rui Qiu,Hui Zhang,Xiao-Zhong Wang,Huo-Sheng Ruan,Yan-Bing Teng,Xiao-Guang Wu,Yun Zheng,Zi-Hao Zhao,Kai-Zhong Liao,Huan-Cheng Mai,Xiao-Dong Korean Nuclear Society 2023 Nuclear Engineering and Technology Vol.55 No.6

As medical facilities are usually built at urban areas, special concrete aggregates and evaluation methods are needed to optimize the design of concrete walls by balancing density, thickness, material composition, cost, and other factors. Carbon treatment rooms require a high radiation shielding requirement, as the neutron yield from carbon therapy is much higher than the neutron yield of protons. In this case study, the maximum carbon energy is 430 MeV/u and the maximum current is 0.27 nA from a hybrid particle therapy system. Hospital or facility construction should consider this requirement to design a special heavy concrete. In this work, magnetite is adopted as the major aggregate. Density is determined mainly by the major aggregate content of magnetite, and a heavy concrete test block was constructed for structural tests. The compressive strength is 35.7 MPa. The density ranges from 3.65 g/cm³ to 4.14 g/cm³, and the iron mass content ranges from 53.78% to 60.38% from the 12 cored sample measurements. It was found that there is a linear relationship between density and iron content, and mixing impurities should be the major reason leading to the nonuniform element and density distribution. The effect of this nonuniformity on radiation shielding properties for a carbon treatment room is investigated by three groups of Monte Carlo simulations. Higher density dominates to reduce shielding thickness. However, a higher content of high-Z elements will weaken the shielding strength, especially at a lower dose rate threshold and vice versa. The weakened side effect of a high iron content on the shielding property is obvious at 2.5 µSv=h. Therefore, we should not blindly pursue high Z content in engineering. If the thickness is constrained to 2 m, then the density can be reduced to 3.3 g/cm³, which will save cost by reducing the magnetite composition with 50.44% iron content. If a higher density of 3.9 g/cm³ with 57.65% iron content is selected for construction, then the thickness of the wall can be reduced to 174.2 cm, which will save space for equipment installation.