http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Moire' 영상무늬를 통한 근골격계질환의 진단과 현가장치를 이용한 치료방안
이상용,이은경,권소희,정혜경,김삼태,정명수,이기남,Lee Sang-Yong,Lee Eun-Kyong,Kwon So-Hee,Jung He-Kyong,Kim Sam-Tae,Chong Myong-Soo,Lee Ki-Nam 대한예방한의학회 2003 대한예방한의학회지 Vol.7 No.2
The Musculoskeletal Disease has been ignored or turned away due to the difficulty of diagnosis and the vagueness of judgement up to now. Contrary to other diseases, there were many cases where the character of the Musculoskeletal Disease wasn't revealed through the objective inspection. And that's because the Musculoskeletal Disease appears for the most part due to muscular defect so it is impossible to diagnose the muscle by X-ray diagnosing the bone and it is also impossible to diagnose the fine damage of the muscle or tendon even by advanced device like MRI. As the nervous blood vessels or acupunctures pass through or are next to the muscle, the tension of the muscle put pressure on these so can become the direct or indirect causes of various kinds of pains or intern diseases. But in spite of that, for lack of proper equipment diagnosing the state of the muscle(Shortened.. Relaxed... or Hardened...) the muscle has been disregarded or neglected intentionally or unintentionally. While many people think themselves to be a muscular expert, if they don't see the shape of the muscle, that is just like blind treatment. But as now the equipment diagnosing the state of the muscle is developed, it seems that this problem can be settled. It was attempted in this study that the muscle or skeleton of the Musculoskeletal disease patients was diagno the treatment order and method were decided by a questionnaire survey and simple inspection, and the Musculoskeletal correction exercise using the muscle management and sling system made them escape from the Musculoskeletal disease, turning their muscle into more flexible and stronger muscle. As a result notwithstanding the limited treatment period '12 times', the improvement rate was as high as 74%, which showed that the muscle management and Musculoskeletal correction exercise had a great effect on the symptom improvement of the patients. If the treatment times had increased, the improvement rate also would have increased more.
Al 7075합금의 열간단조와 반응고 단조에 있어서 조직, 성형성 및 경도 특성 비교
이상용,전재일,이정환,이영선,신평우,Lee, Sang-Yong,Jeon, Jae-Il,Lee, Jeong-Hwan,Lee, Yeong-Seon,Sin, Pyeong-U 한국소성가공학회 1998 소성가공 : 한국소성가공학회지 Vol.7 No.6
Conventional hot forging and thixoforging of Al 7075 alloy have been compared with respect to microstructures, formability and hardness. Two distinctive temperature-strain rate ranges for hot forging of Al 7075 alloy were observed from the results of simple compression tests with strain rates of 10-3∼101 sec-1 in the temperatures between $250^{\circ}C$ and $500^{\circ}C.$ In the dynamic recovery range (low temperature-high strain rate range) multi-stage forging was necessary to form a complex shape part due to the lack of formability. In the high temperature-low strain rate range, in which dynamic recrystallization takes place a complex shaped park could be formed by single-stage forging. About 50% cold working in the SIMA process was necessary to get a fine and homogeneous microstructures. Microstructural study suggest that thixoforged Al 7075 part has fine grains and homogeneous microstructures. Its hardness number is almost same to that of conventional hot forged part after aging treatment.
원형 미소 채널 내 드라이 플러그류의 유동 영역 한계와 압력 강하에 관한 실험적 연구
이치영(Chi Young Lee),이상용(Sang Yong Lee) 대한기계학회 2008 대한기계학회 춘추학술대회 Vol.2008 No.11
In the present experimental study, the regime limit and pressure drop of dry-plug flow (dry wall condition at the gas portions of plug flow) in round mini-channels has been investigated. The air-water mixture was flowed through the round mini-channels made of Teflon, where the tube diameters ranged from 1.26 to 2.06 ㎜. For the present experimental range, with decreasing of the tube diameter, the transition between the plug and slug flows (wet and dry) happened at the higher gas superficial velocity region, which were in good agreement with the previous flow pattern maps tested. On the other hand, the transition between the wet- and dry-plug flows was little affected by the change of the tube diameter. In the pressure drop of dry-plug flows, among the correlations tested, the Lee and Lee’s (2008) correlation best fitted the measured pressure drop data within the mean deviation of 10 % for the present experimental range.
개선된 이산 코사인 변환을 이용한 모바일 폰 용 저전력 초점 값 계산 알고리즘
이상용,박상수,김수원,Lee Sang-Yong,Park Sang-Soo,Kim Soo-Won 대한전자공학회 2005 電子工學會論文誌-SD (Semiconductor and devices) Vol.42 No.11
본 논문에서는 최소의 sub-window를 사용하여 정확한 초점 값을 측정할 수 있는 모바일 폰 용 저전력 MDCT 초점 값 연산 방식을 제안하였다. 제안된 알고리즘은 기존의 DCT 연산 계수 중 초점 값의 척도로 사용하기에 특성이 가장 우수하고, 하드웨어로 구현하였을 경우 연산량이 최소가 되는 중간 결과 계수를 초점 값으로 사용한다. 또한 중간 주파수에 연관된 DCT 결과를 초점 값으로 사용하므로 임펄스 성 노이즈의 영향을 줄일 수 있고, 영상의 흐린 정도에 따른 초점 값의 변화가 커서기존의 Gradient 방식보다 초점 값 특성이 우수하다. 제안된 알고리즘은 Verilog HDL언어를 사용하여 구현되었으며, Excalibur-ARM보드에 내장하여 그 성능을 검증하였다. This paper proposes the low power MDCT algorithm for precise FV with minimum size of sub-window in mobile phone. Proposed algerian uses the coefficient at the middle of whole result process requiring the least number of calculations, since it has a good characteristic when used as standard of the FV and needs minimum amount of operation. In addition, using the DCT result related to the middle frequency makes the characteristic of FV more superior because it suppresses the impulsive noise and difference of focus values is larger than any others. The proposed algorithm is implemented using Verilog HDL and verified using Excalibur-ARM board.
잣나무에서 분리한 피목가지마름병균 , Cenangium ferruginosum 의 배양특성 및 병원성 검정
이상용,정주해,이종규 ( Sang Yong Lee,Joo Hae Jung,Jong Kyu Lee ) 한국산림과학회 1998 한국산림과학회지 Vol.87 No.4
A die-back fungus isolated from Pinus koraiensis was identified as Cenangium ferruginosum. Mycelial growth of the fungus was the best on PDA among five media tested. Mycelial growths on agar media supplemented with extracts from coniferous trees were relatively better than those on media with extracts from non-coniferous trees. Optimum temperature and pH for the mycelial growth of C. ferruginosum on PDA were 10℃ and pH 5, respectively. When five-years-old P. koraiensis seedlings were artificially inoculated with the fungus for the pathogenicity test of this fungus, 80% of seedlings were infected. and the same symptoms and signs were developed as those of naturally-infected trees.
Zr-Sn-Fe-Cr 및 Zr-Nb-Sn-Fe 합금 피복관의 기계적 특성 및 Creep 거동
이상용,고산,최영철,김규태,최재하,홍순익,Lee, Sang-Yong,Ko, San,Choi, Young-Chul,Kim, Kyu-Tae,Choi, Jae-Ha,Hong, Sun-Ig 한국재료학회 2008 한국재료학회지 Vol.18 No.6
Since the 1990s, the second generation of Zirconium alloys containing main alloy compositions of Nb, Sn and Fe have been used as a replacement of Zircaloy-4 (Zr-Sn-Fe-Cr), a first-generation Zirconium alloy, to meet severe and rigorous reactor operating conditions characterized by high-burn-up, high-power and high-pH operations. In this study, the mechanical properties and creep behaviors of Zr-Sn-Fe-Cr and Zr-Nb-Sn-Fe alloys were investigated in a temperature range of $450{\sim}500^{\circ}C$ and in a stress range of $80{\sim}150\;MPa$. The mechanical testing results indicate that the yield and tensile strengths of the Zr-Nb-Sn-Fe alloy are slightly higher compared to those of Zr-Sn-Fe-Cr. This can be explained by the second phase strengthening of the $\beta$-Nb precipitates. The creep test results indicate that the stress exponent for the steady-state creep rate decreases with the increase in the applied stress. However, the stress exponent of the Zr-Sn-Fe-Cr alloy is lower than that of the Zr-Nb-Sn-Fe alloy in a relatively high stress range, whereas the creep activation energy of the former is slightly higher than that of the latter. This can be explained by the dynamic deformation aging effect caused by the interaction of dislocations with Sn substitutional atoms. A higher Sn content leads to a lower stress exponent value and higher creep activation energy.