경주지역 여고생의 초경과 체성장간의 관계

김준섭,권오구,박진석,오종수,박정현,박제식,안세한,이용환,서정호,신태섭,최영배,김덕수,이관,박수경 東國大學校醫學硏究所 2002 東國醫學 Vol.9 No.1

본 연구는 경주지역 1개 고등학교 3학년 여고생을 대상으로 초경 시작 전인 초등학교 4학년부터 고등학교 2학년까지의 키, 몸무게, 가슴둘레 수치와 초경 연령을 파악하여 여성의 초경이 빠를수록 체성장 속도의 변화가 있을 것이라는 가설을 기초로 두 요인간의 관련성을 파악하고자 시행되었다. 경주시 1개 여자고등학교 3학년생 총 317명에 대해 ㅊ경 나이, 초경시 심리 상태, 초경이 시작되었을 때의 상담 여부와 상담하였던 사람, 부모 신장과 초경전후의 식사 규칙성, 다이어트 경험, 수면시간, 스트레스, 음주/흡연 여부, 질병력 등에 대한 설문 조사를 시행하였고, 초등학교 4학년부터 고등학교 2학년까지의 키, 몸무게, 가슴둘레에 대한 정보는 건강기록부에서 확보하였다. 상기 대상자 중 건강기록부가 분실된 39명, 초경나이에 대해 응답하지 않았던 29명 및 결석 등으로 조사를 하지 못하였던 42명을 제외한 조사 대상자는 206명으로 선정하였다. 대상자들의 초경연령 평균값(Mean±SD)은 13.0±1.11이었고, 초등학교 4학년부터 고등학교 2학년까지의 초경 이후 신장 성장률은 감소하였으며, 초경연령이 빠른 군이 초등학교 때는 신장에 있어서 우위를 차지하나 고등학교에 오면서 신장은 비슷한 수준이 되었다. 초경후 1-2년 사이에 체중과 흉위의 증가율은 감소하였고, 초경연령이 빠른 군이 초등학교와 고등학교 사이에 체중과 흉위에서 모두 우위를 차지하였다. 본 연구의 결과는, 흔히 이차 성징의 시작 시점 혹은 사춘기의 시작 시점으로 보고있는 초경 연령이 청소년기의 성장과 밀접한 관련성이 있고, 특히 체중과 흉위의 성장 속도와 밀접한 관련성이 있음을 시사한다. To understand the onset of menarche in relation to changes in physical growth that take place during female adolescence, especially the changes in height and weight velocity. The 207 senior in one women high school of Kyongju were investigated in April 3 to 8, 2001. We collected the information, relation in the age at menarche, height & weight of parents, regularity of eating, and obesity diet, duration of sleeping, sickness & stress near age at menarche, by self-recording. The status of height, weight & chest circumference between the 4th grade of primary school and the junior of high school was collected by individual Health Record. The results were followed; The average age at menarche was 12.95±1.11 years old and the most frequent age of menarche is 13 years. After menarche, the velocity of height, weight and chest circumference were decreased. The most rapid group of menarche hold dominant position in height during elementary school. As time passed, they dont hold dominant position in height. The most rapid group of menarche get an advantage in the weight and the girth of chest after elementary school. The height of subjects is directly proportional to the height of their parents. These results suggest that the starting age at menestuation can be closely associated with physical growth and development.

일부 생산직 근로자의 소음과 사회심리적 요인이 혈압에 미치는 영향

박종구,강명근,차봉석,고상열,장세진,고상백 大韓産業醫學會 1997 대한직업환경의학회지 Vol.9 No.2

This study was conducted to assess the effects of noise exposure and psychosocial factor on blood pressure in manufacturing workers. The study subjects are 414 workers(243 males, 171 females) employed at the noisy department. The mean age of low exposed group(<85dB) was 34.65±9.53 years, and that of high exposed group(≥85dB) was 36.37±11.15 years. The difference in mean age was not significant. The mean and distribution of working duration, smoking status, drinking status were not significantly different between two groups. The mean systolic blood pressure of the low exposed group was 120.01±12.06 mmHg, and that of high exposed group was 126.27±13.84mmHg. The mean diastolic blood pressure of the low exposed and the high exposed group were 77.18±10.83 mmHg, and 83.46±11.22mmHg respectively. These differences of blood pressure were statistically significant(p<0.05). The workers in noisy department have significantly less work environmental satisfaction, higher job demand, and higher social support. The mean values of psychosocial distress were higher in the workers of the noisy department, but the difference was not statistically significant. This study was to speculate whether the work environmental satisfaction and social support modify the association between the noise exposure level and the blood pressure. The result showed that work environmental satisfaction could not modify the association between the blood pressure and the noise exposure. Social support at work did not modify the association. Furthermore, we evaluated the high job strain from a combination of ratio of the high job strain group for hypertension in diastolic blood pressure were statistically significant, but not in systolic blood pressure. Hierarchical multiple regression analysis was used to determine whither the independent variables contributed to explaining the blood pressure. After controlling for possible confounders, we found that the noise exposure level was a correlated of the diastolic blood pressure. But no association between the noise exposure level and the systolic blood pressure. No significant result was found for psychosocial factor.

뇌혈관질환과 심근경색증에 관련된 요인의 비교분석

박종구,김헌주,박금수,이성수,장세진,이은경 연세대학교 원주의과대학 1994 원주의대논문집 Vol.7 No.1

봉합법을 이용한 중검술의 임상적 연구

박 광,서구종 大韓顎顔面成形再建外科學會 1996 Maxillofacial Plastic Reconstructive Surgery Vol.18 No.3

One of the most common cosmetic surgery, the blepharoplasty can be divided two method. there were incisional method and sutured method. Authors try to understand the anatomic difference between the oriental upper eyelids and apply the surgical techniques of constructing upper eyelid crease of oriental case effectively. And we discussed the postoperative complications of the blepharoplasty and proposed the solve of these problems. The sutured method of blepharoplasty was more simple technique than conventional incision method and had low occurrence of complications. Even though slight recurrence, suture, method was more esthetic due to no scar formation.

압축강도 평가를 위한 지능형 응력예측기 구축

박원규,우영환,이종구,윤인식 한국공작기계학회 2001 한국생산제조학회지 Vol.10 No.6

This work is concerned with construction of the intelligence stress predictor for compression strength evaluation using neural network-ultrasonic waves. The contact pressure in jointed plates was measured by using ultrasonic technique. Neural network is used to evaluate and predict contact pressure from the results of the calibration curves. The organized neural system was learned with the accuracy of 99%, as a result of learning the ultrasonic echo ratio to the contact pressure measurement between SM45C and STS410 materials. And it could be evaluated and predicted with the accuracy of 90% in the evaluation of ultrasonic echo ratio difference in the same surface roughness and contact pressure, and 85% in the prediction of virtual ultrasonic echo ratio. Thus the proposed stress predictor is very useful for the evaluation and prediction of the contract pressure between SM45C and STS410 materials.

고혈압의 역학

朴鐘龜 대한고혈압학회 1995 대한고혈압학회지 Vol.1 No.1

Fine-Blanking시 전단 단계별 변형 거동에 관한 연구

이종구,박원규 한국공작기계학회 2002 한국생산제조학회지 Vol.11 No.4

One characteristic of Fine-Blanking is that the size and the direction of stress and strain are very complex in the plastic flow according to the condition of blanking. Especially, they are affected by the clearance of punch and die, by the force of blanking holder and by the force of counter punch. The purpose of this research is to know the deformation behavior in shear zone more clearly, based on Green & Cauch's large deformation theory. The deformation behavior and cracks were investigated in each step of shear, according to punch penetration increase, the use V-indenter ring the hardness of materials. This research found that the transforming behavior was the same as pure discretion, and the cracks could be prevented when hardness is low.

팥바구미 저항성 녹두의 작물학적 특성

이구환,정승근,박상일,송범헌,조용구,김홍식 忠北大學校 農業科學硏究所 2002 農業科學硏究 Vol.19 No.-

용접강의 Fractography 및 기계적 특성에 관한 연구

이종형,정선환,박장규 國立金烏工科大學校附設生産技術硏究所 1997 産業技術開發硏究 Vol.13 No.-

Welding is on the important situation in the connect methods of metals. The interrelationships of nonstress relief annealing, stress relief annealing, hardness value of welding area in the full annealing state, impact value, microstructure, and fracture were studied with the welded mild steel, therefore I got the followingresults. In the respect of impact value and hardness value, the mechanical characteristics of welding area were as good as those of base metal. Especially, as stress relief annealing not only decreased the high hardness of welding area but also increased the impact value of heat area, the negative effects of local heating were reduced and the whole impact value was improved effectively. The smaller the crystilline structure and the area rate of brittleness fracture, the more the hardness value and impact value, and the crystals of welding area that was heattreated with stress relief annealing and full annealing were still smaller than those of base metal. However, I can conclude from my experiment that it is difficult to use the full annealed materials as a welding structure, because the crystals of full annealed materials increase in size and the mechanical characteristics get worse.

운동이 비만 여성의 심근산소소비량과 심전도 QTc 간격에 미치는 영향

이혁종,박윤정,김용권,한구석,진영수 대한스포츠의학회 1999 대한스포츠의학회지 Vol.17 No.1

The purpose of this study was to investigate the effects of exercise staining on MVO_2 and electrocardiogram QTc interval in obese woman and to propose the desirable method for weight loss. Subjects were fifteen obese women for this study. 8 subjects were prolonged QTc interval group and 7 subjects were normal QTc interval. They participated in exercise program consisted of aerobic exercise and weight training exercise at A Medical Center. The body composition including Boyd Weight, BMI, WHR and % Body Fat was measured. The resting and exercise(Bruce protocol 7th min) rate-pressure product(RPP) could be measured with HR and systolic BP for MVO_2 measurement. The electrocardiogram QTc interval was calculated with Bazzett's formula using automated software program. The measured data of this study were as follows: 1) After participating the exercise program consisted of aerobic exercise and weight training exercise, Body Weight, BMI, WHR and % Body Fat were significantly changed in two groups. (p<.05). 2. After participating in the exercise program consisted of aerobic exercise and weight training exercise, the resting and exercise MVO_2 using RPP were significantly changed in two groups(p<.05). 3) After participating in the exercise program consisted of aerobic exercise and weight training exercise, the electrocardiogram QTc interval were decreased but were not significantly changed in prolonged QTc interval group. (p<.29). However, it was significantly decreased in prolonged QTc interval(p<.00).