A Novel Resource Scheduling Scheme for CoMP Systems

( Wen`an Zhou ),( Jianlong Liu ),( Yiyu Zhang ),( Chengyi Yang ),( Xuhui Yang ) 한국인터넷정보학회 2017 KSII Transactions on Internet and Information Syst Vol.11 No.2

Coordinated multiple points transmission and reception (CoMP) technology is used to mitigate the inter-cell interference, and increase cell average user normalized throughput and cell edge user normalized throughput. There are two kinds of radio resource schedule strategies in LTE-A/5G CoMP system, and they are called centralized scheduling strategy and distributed scheduling strategy. The regional centralized scheduling cannot solve interference of inter-region, and the distributed scheduling leads to worse efficiency in the utilize of resources. In this paper, a novel distributed scheduling scheme named 9-Cell alternate authorization (9-CAA) is proposed. In our scheme, time-domain resources are divided orthogonally by coloring theory for inter-region cooperation in 9-Cell scenario [6]. Then, we provide a formula based on 0-1 integer programming to get chromatic number in 9-CAA. Moreover, a feasible optimal chromatic number search algorithm named CNS-9CAA is proposed. In addition, this scheme is expanded to 3-Cell scenario, and name it 3-Cell alternate authorization (3-CAA). At last, simulation results indicate that 9/3-CAA scheme exceed All CU CoMP, 9/3C CU CoMP and DLC resource scheduling scheme in cell average user normalized throughput. Especially, compared with the non-CoMP scheme as a benchmark, the 9-CAA and 3-CAA have improved the edge user normalized throughput by 17.2% and 13.0% respectively.

Head-on Collision Between Two Envelope Solitary Waves in a Granular Medium

Wen-Qing Du,Jian-An Sun,Juan-Fang Han,Wen-Shan Duan,Yang-Yang Yang,Xin Jiang 한국물리학회 2019 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.75 No.11

We investigated the head-on collision between two envelope solitary waves. Head-on collisions between two envelope solitary waves are first discussed in one-dimension (1D) granular chains. The interesting result is that no phase shift or phase delay detected after the head-on collision between two envelope solitary waves. The maximum amplitude during the head-on collision between two envelope solitary waves is also found to be less than the sum of the amplitudes of the two envelope solitary waves, but is larger than the amplitude of the either of the envelope solitary waves.

Positive Association of TEAD1 With Schizophrenia in a Northeast Chinese Han Population

Yang Sun,Lin Wen,Yi-Yang Luo,Wen-Juan Hu,Hui-Wen Ren,Ye Lv,Cong Zhang,Ping Gao,Li-Na Xuan,Guan-Yu Wang,Cheng-Jie Li,Zhi-Xin Xiang,Zhi-Lin Luan 대한신경정신의학회 2023 PSYCHIATRY INVESTIGATION Vol.20 No.12

Objective Schizophrenia is a complex and devastating psychiatric disorder with a strong genetic background. However, much uncertainty still exists about the role of genetic susceptibility in the pathophysiology of schizophrenia. TEA domain transcription factor 1 (TEAD1) is a transcription factor associated with neurodevelopment and has modulating effects on various nervous system diseases. In the current study, we performed a case–control association study in a Northeast Chinese Han population to explore the characteristics of pathogenic <i>TEAD1</i> polymorphisms and potential association with schizophrenia.Methods We recruited a total of 721 schizophrenia patients and 1,195 healthy controls in this study. The 9 single nucleotide polymorphisms (SNPs) in the gene region of <i>TEAD1</i> were selected and genotyped.Results The genetic association analyses showed that five SNPs (rs12289262, rs6485989, rs4415740, rs7113256, and rs1866709) were significantly different between schizophrenia patients and healthy controls in allele or/and genotype frequencies. After Bonferroni correction, the association of three SNPs (rs4415740, rs7113256, and rs1866709) with schizophrenia were still evident. Haplotype analysis revealed that two strong linkage disequilibrium blocks (rs6485989-rs4415740-rs7113256 and rs16911710-rs12364619-rs1866709) were globally associated with schizophrenia. Four haplotypes (C-C-C and T-T-T, rs6485989-rs4415740-rs7113256; G-T-A and G-T-G, rs16911710-rs12364619-rs1866709) were significantly different between schizophrenia patients and healthy controls.Conclusion The current findings indicated that the human <i>TEAD1</i> gene has a genetic association with schizophrenia in the Chinese Han population and may act as a susceptibility gene for schizophrenia.

Coevolution between Human's Anticancer Activities and Functional Foods from Crop Origin Center in the World

Zeng, Ya-Wen,Du, Juan,Pu, Xiao-Ying,Yang, Jia-Zhen,Yang, Tao,Yang, Shu-Ming,Yang, Xiao-Meng Asian Pacific Journal of Cancer Prevention 2015 Asian Pacific journal of cancer prevention Vol.16 No.6

Cancer is the leading cause of death around the world. Anticancer activities from many functional food sources have been reported in years, but correlation between cancer prevalence and types of food with anticancer activities from crop origin center in the world as well as food source with human migration are unclear. Hunger from food shortage is the cause of early human evolution from Africa to Asia and later into Eurasia. The richest functional foods are found in crop origin centers, housing about 70% in the world populations. Crop origin centers have lower cancer incidence and mortality in the world, especially Central Asia, Middle East, Southwest China, India and Ethiopia. Asia and Africa with the richest anticancer crops is not only the most important evolution base of humans and origin center of anticancer functional crop, but also is the lowest mortality and incidence of cancers in the world. Cancer prevention of early human migrations was associated with functional foods from crop origin centers, especially Asia with four centers and one subcenter of crop origin, accounting for 58% of the world population. These results reveal that coevolution between human's anticancer activities associated with functional foods for crop origin centers, especially in Asia and Africa.

MediaCloud: A New Paradigm of Multimedia Computing

( Wen Hui ),( Chuang Lin ),( Yang Yang ) 한국인터넷정보학회 2012 KSII Transactions on Internet and Information Syst Vol.6 No.4

Multimedia computing has attracted considerable attention with the rapid growth in the development and application of multimedia technology. Current studies have attempted to support the increasing resource consumption and computational overhead caused by multimedia computing. In this paper, we propose MediaCloud, a new multimedia computing paradigm that integrates the concept of cloud computing in handling multimedia applications and services effectively and efficiently. MediaCloud faces the following key challenges: heterogeneity, scalability, and multimedia Quality of Service (QoS) provisioning. To address the challenges above, first, a layered architecture of MediaCloud, which can provide scalable multimedia services, is presented. Then, MediaCloud technologies by which users can access multimedia services from different terminals anytime and anywhere with QoS provisioning are introduced. Finally, MediaCloud implementation and applications are presented, and media retrieval and delivery are adopted as case studies to demonstrate the feasibility of the proposed MediaCloud design.

Differential Impacts on Bacterial Composition and Abundance in Rhizosphere Compartments between Al-Tolerant and Al-Sensitive Soybean Genotypes in Acidic Soil

Wen Zhong-Ling,Yang Min-Kai,Fazal Aliya,Liao Yong-Hui,Cheng Lin-Run,Hua Xiao-Mei,Hu Dong-Qing,Shi Ji-Sen,Yang Rong-Wu,Lu Gui-Hua,Qi Jin-Liang,Zhi Hong,Qian Qiu-Ping,Yang Yong-Hua 한국미생물·생명공학회 2020 Journal of microbiology and biotechnology Vol.30 No.8

In this study, two soybean genotypes, i.e., aluminum-tolerant Baxi 10 (BX10) and aluminumsensitive Bendi 2 (BD2), were used as plant materials and acidic red soil was used as growth medium. The soil layers from the inside to the outside of the root are: rhizospheric soil after washing (WRH), rhizospheric soil after brushing (BRH) and rhizospheric soil at two sides (SRH), respectively. The rhizosphere bacterial communities were analyzed by high-throughput sequencing of V4 hypervariable regions of 16S rRNA gene amplicons via Illumina MiSeq. The results of alpha diversity analysis showed that the BRH and SRH of BX10 were significantly lower in community richness than that of BD2, while the WRH exhibited no significant difference between BX10 and BD2. Among the three sampling compartments of the same soybean genotype, WRH had the lowest community richness and diversity while showing the highest coverage. Beta diversity analysis results displayed no significant difference for any compartment between the two genotypes, or among the three different sampling compartments for any same soybean genotype. However, the relative abundance of major bacterial taxa, specifically nitrogen-fixing and/or aluminum-tolerant bacteria, was significantly different in the compartments of the BRH and/or SRH at phylum and genus levels, indicating genotype-dependent variations in rhizosphere bacterial communities. Strikingly, as compared with BRH and SRH, the WRH within the same genotype (BX10 or BD2) always had an enrichment effect on rhizosphere bacteria associated with nitrogen fixation

Micro-Transport Phenomena in the World of Minute Droplets

Wen Jei Yang 대한기계학회 1998 Heat transter conference Vol.1 No.1

High-Definition Computed Tomography for Coronary Artery Stent Imaging: a Phantom Study

Wen Jie Yang,Ke Min Chen,Li Fang Pang,Ying Guo,Jian Ying Li,Huang Zhang,Zi Lai Pan 대한영상의학회 2012 Korean Journal of Radiology Vol.13 No.1

Objective: To assess the performance of a high-definition CT (HDCT) for imaging small caliber coronary stents (≤ 3 mm) by comparing different scan modes of a conventional 64-row standard-definition CT (SDCT). Materials and Methods: A cardiac phantom with twelve stents (2.5 mm and 3.0 mm in diameter) was scanned by HDCT and SDCT. The scan modes were retrospective electrocardiography (ECG)-gated helical and prospective ECG-triggered axial with tube voltages of 120 kVp and 100 kVp, respectively. The inner stent diameters (ISD) and the in-stent attenuation value (AVin-stent) and the in-vessel extra-stent attenuation value (AVin-vessel) were measured by two observers. The artificial lumen narrowing (ALN = [ISD - ISDmeasured]/ISD) and artificial attenuation increase between in-stent and in-vessel (AAI = AVin-stent - AVin-vessel) were calculated. All data was analyzed by intraclass correlation and ANOVA-test. Results: The correlation coefficient of ISD, AVin-vessel and AVin-stent between the two observers was good. The ALNs of HDCT were statistically lower than that of SDCT (30 ± 5.7% versus 35 ± 5.4%, p < 0.05). HDCT had statistically lower AAI values than SDCT (15.7 ± 81.4 HU versus 71.4 ± 90.5 HU, p < 0.05). The prospective axial dataset demonstrated smaller ALN than the retrospective helical dataset on both HDCT and SDCT (p < 0.05). Additionally, there were no differences in ALN between the 120 kVp and 100 kVp tube voltages on HDCT (p = 0.05). Conclusion: High-definition CT helps improve measurement accuracy for imaging coronary stents compared to SDCT. HDCT with 100 kVp and the prospective ECG-triggered axial technique, with a lower radiation dose than 120 kVp application, may be advantageous in evaluating coronary stents with smaller calibers (≤ 3 mm). Objective: To assess the performance of a high-definition CT (HDCT) for imaging small caliber coronary stents (≤ 3 mm) by comparing different scan modes of a conventional 64-row standard-definition CT (SDCT). Materials and Methods: A cardiac phantom with twelve stents (2.5 mm and 3.0 mm in diameter) was scanned by HDCT and SDCT. The scan modes were retrospective electrocardiography (ECG)-gated helical and prospective ECG-triggered axial with tube voltages of 120 kVp and 100 kVp, respectively. The inner stent diameters (ISD) and the in-stent attenuation value (AVin-stent) and the in-vessel extra-stent attenuation value (AVin-vessel) were measured by two observers. The artificial lumen narrowing (ALN = [ISD - ISDmeasured]/ISD) and artificial attenuation increase between in-stent and in-vessel (AAI = AVin-stent - AVin-vessel) were calculated. All data was analyzed by intraclass correlation and ANOVA-test. Results: The correlation coefficient of ISD, AVin-vessel and AVin-stent between the two observers was good. The ALNs of HDCT were statistically lower than that of SDCT (30 ± 5.7% versus 35 ± 5.4%, p < 0.05). HDCT had statistically lower AAI values than SDCT (15.7 ± 81.4 HU versus 71.4 ± 90.5 HU, p < 0.05). The prospective axial dataset demonstrated smaller ALN than the retrospective helical dataset on both HDCT and SDCT (p < 0.05). Additionally, there were no differences in ALN between the 120 kVp and 100 kVp tube voltages on HDCT (p = 0.05). Conclusion: High-definition CT helps improve measurement accuracy for imaging coronary stents compared to SDCT. HDCT with 100 kVp and the prospective ECG-triggered axial technique, with a lower radiation dose than 120 kVp application, may be advantageous in evaluating coronary stents with smaller calibers (≤ 3 mm).

Biomechanical Evaluation of 2 Endoscopic Spine Surgery Methods for Treating Lumbar Disc Herniation: A Finite Element Study

Yang Zou,Shuo Ji,Hui Wen Yang,Tao Ma,Yue Kun Fang,Zhi Cheng Wang,Miao Miao Liu,Ping Hui Zhou,Zheng Qi Bao,Chang Chun Zhang,Yu Chen Ye 대한척추신경외과학회 2024 Neurospine Vol.21 No.1

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion: In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

The thermal stability of atomic layer deposited HfLaOx: Material and electrical characterization

Wen Yang,Qing-Qing Sun,Run-Chen Fang,Lin Chen,Peng Zhou,Shi-Jin Ding,David Wei Zhang 한국물리학회 2012 Current Applied Physics Vol.12 No.6

HfLaOx based Metaleoxideesemiconductor capacitors were fabricated by atomic layer deposition in this work. The material and electrical properties of the films along with the high temperature thermal treatment were investigated. It was found that samples undergoing annealing at 900 ℃ exhibited the best performance. The film was found to be crystallized to a cubic structure at 900 ℃, and the roughness of the films was estimated to be 0.332 nm. For electrical characterization, the C-V curve of the film is in good agreement with the corresponding simulated curve, and the capacitor does not show any hysteresis. Moreover, the Dit near the center of silicon band gap exhibits lowest value, and it was calculated to be 2.28 × 1011 eV-1 cm-2. HfLaOx based Metaleoxideesemiconductor capacitors were fabricated by atomic layer deposition in this work. The material and electrical properties of the films along with the high temperature thermal treatment were investigated. It was found that samples undergoing annealing at 900 ℃ exhibited the best performance. The film was found to be crystallized to a cubic structure at 900 ℃, and the roughness of the films was estimated to be 0.332 nm. For electrical characterization, the C-V curve of the film is in good agreement with the corresponding simulated curve, and the capacitor does not show any hysteresis. Moreover, the Dit near the center of silicon band gap exhibits lowest value, and it was calculated to be 2.28 × 1011 eV-1 cm-2.