한외여과된 돈혈청으로부터 DEAE - Sephacel Chromatography 에 의한 면역단백질의 분리

박우문,유익종,전기홍,이무하 한국축산학회 1997 한국축산학회지 Vol.39 No.1

Concentrated porcine serum with ultrafiltration 30KDa was purified with DEAF-Sephacel column chromatography. Buffer solution with pH 7 to 9 and buffer concentration with 0.01M to 0.05M, and NaCl gradient with 0M∼0.5M, 0M∼0.8M and 0M∼1.0M were used respectively for chromatographic purification. Optimal conditions were at pH 8.0, buffer conc. 0.03M and salt conc, 0M∼0.5M with immunoprotein concentration 82% and production yield 43%. Purified immunoprotein was identified in the molecular weight 50KDa and 15KDa by electrophoresis.

O/W · W/O Emulsion의 Tribology 특성 연구

이봉구,임웅빈,오성모 원광대학교 생산 및 자동화기술연구소 1995 생산.자동화기술연구소논문집 : 원광대 Vol.- No.2

We have been so much interested in the lubrication of emulsion property recently. In particular, O/W and W/O type emulsion have a good property to be used in the Lubricative situation of several services. Therefore, in this section we have studied about the lubricational characteristics in Neat Oil, O/W and W/O type emulsion using the Falex, wear test machine. The result is as follows. 1. In the case of O/W and W/O type emulsion, the beginning friction coefficient than Neat Oil, but it becomes more excellent as the time passes. especially, the W/O type becomes the more excellent. 2. As the load increase, a change in temperature shows to us be nearly similar and all of them, the O/W type is the most excellent in the temperature characteristic. 3. In the beginning, the anti-wear characteristic of emulsion lowers, but after the some load has stability, O/W and W/O type is excellent in order of anti-wear characteristic. 4. In the regular hours, a change in the emulsion becomes settled, so the character of temperature is superior. specially, O/W type is predominant. Therefore, the emulsion in case of the O/W and W/O type are more excellent than Neat oil in the thermal stability and can improve the characteristics of tribology.

Fe-Cu-M-(Si, B) (M = V, Nb, Mo, Ta, W) 합금의 연자기특성 (軟磁氣特性)

강일구,김희중,노태환,이명복,피우갑 대한금속재료학회(대한금속학회) 1990 대한금속·재료학회지 Vol.28 No.4

Dependence of the effective permeability on annealing and the annealing-induced structural change for amorphous Fe_(73.5)Cu₁M₃Si_(13.5)B_9(M=V, Nb, Mo, Ta or W)and Fe_(73.5)Cu₁Nb₃(Si_xB_(1-x))_(22.5)(x=0∼0.8) alloys were investigated. Crystalline Fe_(73.5)Cu₁M₃Si_(13.5)B_9(M=V, Nb, Mo, W)alloys with α-Fe phase which was obtained by annealing at above T_x showed higher effective permeability than with amorphous phase, and the increase in permeability upon crystallization was large in the order of V$lt;W$lt;Mo$lt;Nb. For amorphous Fe_(73.5)Cu₁Nb₃(Si_xB_(1-x))_(22.5) alloys in the composition range from x=0.5 to 0.8, soft magnetic property was improved by crystallization. Moreover, in that composition range, the effective permeability increased with the Si content(x). Superior soft magnetic property of the high-Si alloys was attributed to both the small magnetocrystalline anisotropy and the low magnetostriction. The effective permeabilities measured at 1㎑ and 5 m0e for crystalline Fe-Cu-Mo-Si-B and Fe-Cu-Nb-Si-B(0.5≤x≤0.8) alloys were about 1∼2 × 10⁴, and it was comparable to that of the zero-magnetostriction Co-based amorphous alloys.

早期破膜에 關한 臨床的 考察

許湘,吳文愛,安東源,申吳永 대한산부인과학회 1972 Obstetrics & Gynecology Science Vol.15 No.7

중부 평야지에서 사일리지용 옥수수 품종 선발에 관한 연구 : 파종시기가 사일리지용 옥수수의 생육특성 및 수량에 미치는 영향 Effect of planting time on the growth and yield of silage corn

김준식,김원호,김원영,김영진,한학석,김맹중 한국축산학회 1998 한국축산학회지 Vol.40 No.1

This experiment was conducted at theForage Research Farm of the Beef and Dairy Cattle Division, National Livestock Research Institute, Songhwan in 1992 and 1995 to investigate the effects of planting time (April 15, May 11, June 5) on the growth and yield of silage com(Zea mat's L.). In the plant height, P3144W and DK729 were taller than the others, as 301.6, and 296.3cm, respectively, and P3282 was the shortest as 247.7㎝ at the first planting time. P3144W and DK729 were taller than the others, as 303.6㎝, 281.7㎝, respectively, and P3282 was the shortest as 249.6㎝ at the second planting time. P3144W was the tallest as 276.9㎝. DK689 was the shortest as 246.1㎝ at the third planting time. The ear heights of P3144W and P3282 were 137.3 and 132.7㎝, respectively, and Suweon 19 was the shortest as 116.4㎝ at the first planting time. Those of P3144W and P3282 were as 135.9, 134.4㎝, respectively, and Suwoen 19 was the shortest as 112.1㎝ at the second planting time. P3144W was the tallest as 111.0㎝ and Suweon 19 was the shortest as 94.2㎝ at the third planting time. In the dry matter yield per ha, P3352, DK729 and P3144W were higher than the others as 18,957, 18,840, 18,743㎏, respectively, and P3282 was the lowest as 13,863㎏ at the first planting time. 64743 and P3352 were 18,183 and 17,874㎏, respectively, and Suwoen 19 was the lowest as 15,007㎏ at the second planting time. P3144W was the highest as 19,112㎏ and Suwnen 19 was the lowest as 14,793㎏ at the third planting time. The TDN yield per ha, of P3352, P3144W and DK729 were 13,552, 13,281 and 13,252㎏, respectively, and P3282 was the lowest as 9,793㎏ at the first planting time. 64743 and P3352 were higher than the others as 13,149 and 13,009kg, respectively, and Suwoen 19 was the lowest as 10,872㎏ at the second planting time. P3144W was the highest as 13,521㎏ and Suwven 19 was the lowest as 10,392㎏ at the third planting time.

灌漑用水路의 水路損失率 算定에 관한 硏究

李基春,具滋雄,金在英,李宰泳,徐元明 전북대학교 농업과학기술연구소 1982 農大論文集 Vol.13 No.-

This study was carried out in order to estimate water losses in irrigation canals, which may be used to evaluate the water requirement for irrigation projects. The conveyance losses were measured by the inflow-outflow method, the seepage were measured by the ponding method, and the operation losses in the course of irrigation were calculated by comparing the two kinds of losses. The results obtained in this experiment were as follows : Conveyance losses per unit area of wetted perimeter per second by the main irrigation canal, the secondary irrigation canal and the tributary irrigation, canal, were 1.399x10-5m3/m3/sec, 5.154x10-5m3/m3/sec, and 2.670×10-5m3/m3/sec respectively in the Goong-sa area. And they were 1.934x10-5m3/m3/sec, 2.149x10-5m3/m3/sec, and 4.558x10-6m3/m3/sec respectively in the Seong-dug area. Seepage losses per unit area of wetted perimeter per second by the secondary irrigation canal and the tributary irrigation canal, were 2.180×10-6m3/m3/sec and 2.168×10-6m3/m3/sec in the Goons-sa area. 1.150x10-6m3/m3/sec and 1.084x10-6m3 /m3/sec in the Seong-dug area respectively. Operation losses per unit area of wetted perimeter per second by the secondary irrigation canal and the tributary irrigation canal, were 4.936×10-5m3/m3/sec and 2.453×10-5m3/m3/sec in the Goong-sa area, 2.034×10-5m3/m3/sec and 4.450×10-5m3/m3 /sec in the Seong-dug area respectively. Conveyance, seepage and operation losses in the Goong-sa area were 6.7%, 94.6%, and 14.0% more than those in the Seong-dug area. Operation losses amount to about 17 times as much as seepage losses in the Goons-sa area and about 29 times in the Seong-dug area .The seepage losses depend much on the soil texture. ranging from 7.437×10-7m3/m3/sec to 2.430x10-6 m3/m3/sec. Water loss rates in the main irrigation canal, the secondary irrigation canal and the tributary irrigation canal, were estimated as 8.49%. 37.27%, and 9.8l%, respectively in the Goong-sa area. And they were estimated as 15.10%, 32.67% and 13.73% respectively in the Seong-dug area.

급냉응고/분말야금법으로 제조한 Al-Fe-V-Si-Ti-W 합금의 고온크립거동

김인수,김낙준,남수우,위당문,오승철,최상우 대한금속재료학회(대한금속학회) 1995 대한금속·재료학회지 Vol.33 No.11

The elevated temperature creep properties and microstructural stability of RS/PM Al-10Fe-1.3V-2Si-1Ti-1W(wt.%) alloy have been investigated. The alloy showed high stress exponent of 12 to 18 and activation energy of 237 to 808 kJ/㏖, which was strongly dependent on the temperature and stress. The unusual creep behavior of the dispersion strengthened alloys cannot be described satisfactorily by current creep laws, Recently, Ro¨sler and Arzt proposed a new model assuming thermally activated dislocation detachment from dispersoids exerting an attractive force. In the present study, experimental evidence was achieved for the presence of attractive interaction between the dislocation and the dispersoids using TEM observations. The creep behavior of the alloy was analyzed using the model proposed by Ro¨sler and Arzt, and the experimental data were consistent with the prediction based on the model. It has been confirmed that the high temperature deformation of the alloy was dominated by the dislocation creep at the temperature range of 400 to 480℃, but the diffusional creep at the interface between powders also contributed to the deformation above 430℃.

양산단층 중앙부의 활단층 지형과 Trench 조사

조화룡,강전독정,전명순,김성작,도변만구,좌등비여지,전정수,지헌철,미지화부 한국지형학회 1994 한국지형학회지 Vol.1 No.2

梁山斷層系의 중앙부에 대하여 항공사진 판독과 현지 지형, 지질 조사를 통하여 다음과 같은 사실이 밝혀졌다. 1. 梁山斷層系는 第脚紀(後期)에도 활동을 반복하고 있는 活斷層이다. 따라서 이 단충은 그 좌우에 분포하는 高位, 中位, 低位의 각 河岸段丘面 모두를 상, 하방향으로 누적적으로 변화시키고 있다. 2. 梁山斷層系의 중앙부에서 段丘面의 變位로 미루어 볼 때 동측이 상대적으로 隆起하고 있다. 이것은 이 지역의 中地形的 山地高度의 분포와는 逆이다. 3. 斷層線온 현저하게 直線的으로 연장되어 있고, 斷層面은 거의 수직이다. 이 斷層系에 수반되는 破碑帶도 폭 수십 m 이상으로 넓고, 현저한 斷層粘土帶와 變形帶를 동반한다. 4. 偏平礫의 변형 형태에 의하면 走向移動이 탁월한 단층운동이 추정된다. 斷層粘土帶의 破碎物質의 관찰에 의하여 右橫變位走向移動(right strike slip)이 인정된다. 5. 이들의 특징으로부터 梁山斷層系는 走商移動(右橫變位)이 탁월한 活斷層으로 판명되었다. 段丘面 및 堆積物의 추정 계산치로부터 梁山斷層系의 평균 상, 하 變位 速度는 0.02-0.03㎜/y. 정도이고, 右橫變位의 평균 속도는 적어도 C급 상위(0.05∼0.1㎜/y.) 정도이든지 이것을 약간 상회하는 정도일 것으로 추정된다. 6. 低位 및 最低位의 段丘面에서는 上位變位를 밝히기 어려웠다. 이들의 段丘面 위에는 논으로 이용되고 있기 때문에 오랜 기간 동안 인공적으로 改變을 받아왔으며 이들 단구면 위에서 1 ∼2m 정도의 상·하 변위가 있었다고 해도 인공적 개변이 이를 지워버렸을 것이다. 따라서 이들의 최근에 형성된 단구면에서는 변위의 유무를 언급할 수 없었다. Many distinct lineaments have been recognized by Landsat images In Korea Peninsula. The Yangsan fault system situated in the southeastern part of Korea is especially linear, continuously traceable for a long distance(about 200㎞), and particularly remarkable among these linearnent. The topographic expression of the Yangsan fault system is derived from the straightly stretching fault valley with wide shattered zones in the direction of NNE-SSW. This fault system extends for about 200㎞ from the mouth of the Nagdong River west of Busan in the south to Yeondong in the north, and geologically separates Korean Peninsula from the East Sea. The amount of horizontal displacement may reach 30㎞. It is recognized as one of the most important faults in Korea Peninsula. From the interpretations of aerial photographs, and field surveys along the central part of the Yangsan fault system, the main results are summarized as follows; 1. The Yangsan fault system has repeatedly moved in the late Quaternary. The lower to higher river terrace surface on this system show cumulative vertical offsets. 2. The vertical component is upthrown on the east side from considering the terrace offset and the distribution of the mountainous lands. This vertical movement is reverse to the topographical situation on the meso-scale. 3. The fault trace is extremely straight. The fault plane is almost vertical. The shattered zone exceeds tens of meters in width with a remarkable fault gouge. 4. The longer axis of flat clasts within the gravel excavated in the exploratory trench showed the rearrangement along the fault. The predominantly right-lateral movements were recognized as the elongation of clayey parts and breccias in the fault gouge. 5. From these characteristics, the Yangsan fault was clarified to be active with predominantly right-lateral movement. Estimated ages of terraces and its deposits give average rates of vertical and right slip on the Yangsan fault system at about 0.02~0.03&/y., respectively. 6. The fault topography is not found on the lower terraces. As the surface of lower fault scarplets less than a few meters high might have been modified or destroyed by the human actions. Therefore, we cannot mention the existence of the younger movement on the lower terraces.

용융철중의 텅스텐의 거동

이계완,조정완,김길무 대한금속재료학회(대한금속학회) 1972 대한금속·재료학회지 Vol.10 No.1

CO·CO₂가스 분위기하에서의 Fe-W 용융체에 대한 슬래그-용강간의 반응을 1,650℃ 및 1,750℃에서 검토하였다. Pco/Pco₂=5.0 이상에서 텅스텐의 슬래그-용강간의 분포, [W]/(WO₃)는 다음 반응평형에 따라 결정된다. (WO₃)+3[Fe]=[W]+3(FeO) log K_f=-22,300/T+10.66 슬래그-용강간의 반응에 대한 평형항수, K_f는 1,650℃의 경우 Pco/Pco₂=3.3이하에서 점차로 감소하고, 1,750℃의 경우는 Pco/Pco₂=5.0 이하에서 급격히 감소한다. 슬래그상중의 (FeO)함량은 Pco/Pco₂가 감소함에 따라 다음 반응에 의하여 증가한다. [Fe]+CO₂=(FeO)+CO 공기중에서 용해할 때 슬래그-용강간의 반응을 다음과 같이 추정하였다. (WO₃)+2.5[Fe]=[W]+2.5(FeO_(1.2)) log K_i=-14,288/T+6.31 Slag-metal reactions for iron-tungsten melts under CO·CO₂ gas atmosphere are investigated at 1,650℃ and 1,750℃. When Pco/Pco₂ is more than 5.0, slag-metal distributions of tungsten, [W]/(WO₃), can be determined by the following reaction equilibriclm. (WO₃)+3[Fe]=[W]+3(FeO) log K_f=-22,300/T+10.66 The equilibrium constant, K_f, for the slag-metal reaction slightly decreases when Pco/Pco₂ is less than 3.3 at 1,650℃, and suddenly decreases below Pco/Pco₂=5.0 at 1,750℃. (FeO) contents of slag phase increase, as Pco/Pco₂ decrease according to the following reaction, [Fe]+CO₂=(FeO)+CO, An estimation for slag-metal reactions on open melting is as follows; (WO₃)+2.5[Fe]=[W]+2.5(FeO_(1.2)) log K_i=-14,288/T+6.31

Ti-Ni 형상기억합금의 반복변형에 의한 성능렬화현상

홍종휘,신명철,오명훈,지광구,장우양 대한금속재료학회(대한금속학회) 1989 대한금속·재료학회지 Vol.27 No.1

The effect of deformation on the transformation behavior in Ti-Ni alloy was studied. Coil spring of Ti-Ni alloy used as element of tilt plate type heat engine, was cyclically expanded and contracted by temperature difference. The Results obtained in this study are as follows. 1. By the cyclic deformation, M_s and A_f decreased with increasing the number of cycles, however, M_s remained constant. The cycling effect was caused by the generation of dislocation during cyclic deformation 2. The cycling effect (decrease of M_s and A_f) increased with the increase of the heat treatment temperature and deformation strain. When the cyclic deformation was conducted in the temperature range of B2↔R-phase, transformation temperature changed little. 3. That unrecovered strain appeared to be proportional to the amount of decrease of M_s and A_f confirmed that cycling effect was caused by introduction of dislocation during deformation.