돼지 췌장 유래 엘라스타제의 항원성 시험

김순회,백남기,안병옥,이상득,이순복,김원배,양중익 A.R. Liss 1990 ENVIRONMENTAL MUTAGENS AND CARCINOGENS Vol.10 No.2

의원성 사고로 발생한 타액선염 : 증례보고

김현우,허경회,이원진,허민석,이삼선,최순철 대한구강악안면방사선학회 2004 Imaging Science in Dentistry Vol.34 No.2

A case of sialadenitis is presented in a patient with painful swelling of the right mouth floor. The condition was caused by trauma on the right mouth floor during dental treatment, which had happened 15 days before admission. On aspiration, mucous secretion was found and ultrasonography showed obstruction of duct. Histopathological studies and surgical investigation established a definite diagnosis of obstructive sialadenitis caused by ductal laceration. As surgical treatment sialodochoplasty was selected. The case and relevant considerations are discussed.

원룸형 주택의 불편사항 및 하자 분석

정회창, 방홍순, 김옥규 충북대학교 건설기술연구소 2018 建設技術論文集 Vol.37 No.2

본문 참조

디지털 측방두부규격방사선사진과 MDCT의 3차원 재구성 영상을 이용한 합성측방두부규격방사선사진의 계측치 비교 및 머리 위치가 미치는 효과

김미자,최보람,허경회,이원진,허민석,이삼선,최순철 대한구강악안면방사선학회 2009 Imaging Science in Dentistry Vol.39 No.3

Purpose : To investigate the reproducibilities and compare the measurements in digital and MDCT-synthesized cephalometric radiograph, and to investigate the effect of head position on the measurement during imaging with MDCT. Materials and Methods : Twenty-two dry skulls (combined with mandible) were used in this study. Conventional digital cephalometric radiograph was taken in standard position, and MDCT was taken in standard position and two rotated position (10°left rotation and 10°right tilting). MDCT data were imported in OnDemand?? and lateral cephalometric radiograph were synthesized from 3D virtual models. Two types of rotated MDCT data were synthesized with default mode and with corrected mode using both ear rods. For all six images, sixteen angular and eleven linear measurements were made in V-Ceph?? three times. Reproducibility of measurements was assessed using repeated measures ANOVA and ICC. Linear and angular measurements were compared between digital and five MDCTsynthesized images by Student t-test. Results : All measurements in six types of cephalometric radiograph were not statistically different under ICC examination. Measurements were not different between digital and MDCT-synthesized images (P> .05). Measurements in MDCT-synthesized image in 10°left rotation or 10°right tilting position showed possibility of difference from digital image in some measurements, and possibility of improvement via realignment of head position using both ear rods. Conclusion : MDCT-synthesized cephalometric radiograph can substitute conventional cephalometric radiograph. The error on head position during imaging with MDCT have possibility that can produce measurement errors with MDCT-synthesized image, and these position error can be corrected by realignment of the head position using both ear rods. (Korean J Oral Maxillofac Radiol 2009; 39 : 133-47)

방사선사진에서의 골질과 임상적으로 평가한 골질 분류의 상관관계

김현우,허경회,박관수,김정화,이원진,허민석,이삼선,최순철 대한구강악안면방사선학회 2006 Imaging Science in Dentistry Vol.37 No.1

Purpose : To investigate the validity of digital image processing on panoramic radiographs in estimating bone quality before endosseous dental implant installation by correlating bone quality in radiographic images with clinical bone quality classification. Materials and Methods : An experienced surgeon assessed and classified bone quality for implant sites with tactile sensation at the time of implant placement. Including fractal dimension eighteen morphologic features of trabecular pattern were examined in each anatomical sites on panoramic radiographs. Finally bone quality of 67 implant sites were evaluated in 42 patients. Results : Pearson correlation analysis showed that three morphologic parameters had weak linear negative correlation with clinical bone quality classification showing correlation coefficients of -0.276, -0.280, and -0.289, respectively (p<0.05). And other three morphologic parameters had obvious linear negative correlation with clinical bone quality classification showing correlation coefficients of -0.346, -0.488, and -0.343 respectively (p<0.05). Fractal dimension also had a linear correlation with clinical bone quality classification with correlation coefficients -0.506 significantly (p<0.05). Conclusion : This study suggests that fractal and morphometric analysis using digital panoramic radiographs can be used to evaluate bone quality for implant recipient sites. (Korean J Oral Maxillofac Radiol 2006; 36 : 25-32)

디지털 및 일반 측방두부규격방사선사진에서 측정 방법에 따른 계측치의 비교

김미자,허경회,이원진,허민석,이삼선,이진구,안병근,최순철 대한구강악안면방사선학회 2005 Imaging Science in Dentistry Vol.35 No.1

Purpose : To compare cephalometric measurement between measuring methods in digital and conventional lateral cephalometric radiograph. Materials and Methods : Twenty digital and conventional lateral cephalometric radiographs were selected. In digital group, cephalometric measurements were performed manually using hardcopies and automatically using VCeph^(TM) program on the monitor. In conventional group, the same measurements were performed manually on conventional films, and for automatic measurement conventional films were digitized by scanner. All measurements were performed twice by 4 observers, and 24 cephalometric variables were calculated and the time spent for each measurement was recorded. The differences in measurements data and the time spent for each measurement were compared within each group. Intra-observer and inter-observer comparisons were performed. Results : In both groups, no statistically significant difference between manual and automatic measurements was observed and most of the variables didn’t show statistically significant differences between methods. The observer with less experience tended to show statistically significant differences of measurements between methods, and differences from other observers. The differences of measurements between methods in digital group were lesser than those of conventional group with statistical significance in 8 variables out of 24. With automatic method and in digital group, the spent time was shorter. Conclusion : With direct digital radiograph, automatic method using manually idenitified landmarks can be preferable in cephalometric analysis.

구강외과 수술용 스텐트 기반 영상유도 수술 시스템의 개발

이우진,김대승,이원진,이삼선,최순철,허민석,허경회,김명진,이지호 대한구강악안면방사선학회 2009 Imaging Science in Dentistry Vol.39 No.3

Purpose : The purpose of this study was to develop a stent-based image guided surgery system and to apply it to oral and maxillofacial surgeries for anatomically complex sites. Materials and Methods : We devised a patient-specific stent for patient-to-image registration and navigation. Threedimensional positions of the reference probe and the tool probe were tracked by an optical camera system and the relative position of the handpiece drill tip to the reference probe was monitored continuously on the monitor of a PC. Using 8 landmarks for measuring accuracy, the spatial discrepancy between CT image coordinate and physical coordinate was calculated for testing the normality. Results : The accuracy over 8 anatomical landmarks showed an overall mean of 0.56±0.16 mm. The developed system was applied to a surgery for a vertical alveolar bone augmentation in right mandibular posterior area and possible interior alveolar nerve injury case of an impacted third molar. The developed system provided continuous monitoring of invisible anatomical structures during operation and 3D information for operation sites. The clinical challenge showed sufficient accuracy and availability of anatomically complex operation sites. Conclusion : The developed system showed sufficient accuracy and availability in oral and maxillofacial surgeries for anatomically complex sites. (Korean J Oral Maxillofac Radiol 2009; 39 : 149-56)

慢性骨髓炎 瘻孔周圍病巢에 合倂한 扁平上皮癌의 二例 : Report of two cases

鄭仁熙,朱珽彬,金光會,鄭淳萬 醫藥係社 1965 綜合 醫學 Vol.10 No.8

Graves 병에 동반된 Guillain-Barre 증후군

김종순,한승수,김종호,김광희,전배완,윤순일 대한내과학회 1991 대한내과학회지 Vol.41 No.3

Autoimmune thyroid diseases include Graves disease, Hashimotos thyroiditis and primary myxedema. Hyperthyroidism is associated with a variety of muscle abnormalities such as myopathy, periodic paralysis and myasthenia gravis, There are several reports of autoimmune thyroid diseases associated with various other autoimmune diseases such as type I diabetes mellitus, aplastic anemia and rheumatoid arthritis, Guillain-Barre syndrome, associated with hyperthyroidism, has been previously reported in 4 cases. A 41-year-old woman developed Guillain-Barre syndrome during the treatment of Graves disease with propylthiouracil (PTU). She had quadriplegia and recurrence of hyperthyroidism. Her CSF protein level was elevated and the CSF cell count was not elevated. The recurrent hyperthyroidism was treated with PTU. She responded to therapy well and became euthyroid without improvement of muscle weakness. She received physical therapy and showed progressive gain in muscle strength. In conclusion, although Guillain-Barre syndrome happens to coexist during treatment of Graves disease, the former may be associated with the latter by a common autoimmune pathogenesis.

Development of 3D statistical mandible models for cephalometric measurements

Kim, Sung-Goo,Yi, Won-Jin,Hwang, Soon-Jung,Choi, Soon-Chul,Lee, Sam-Sun,Heo, Min-Suk,Huh, Kyung-Hoe,Kim, Tae-Il,Hong, Helen,Yoo, Ji-Hyun Korean Academy of Oral and Maxillofacial Radiology 2012 Imaging Science in Dentistry Vol.42 No.3

Purpose: The aim of this study was to provide sex-matched three-dimensional (3D) statistical shape models of the mandible, which would provide cephalometric parameters for 3D treatment planning and cephalometric measurements in orthognathic surgery. Materials and Methods: The subjects used to create the 3D shape models of the mandible included 23 males and 23 females. The mandibles were segmented semi-automatically from 3D facial CT images. Each individual mandible shape was reconstructed as a 3D surface model, which was parameterized to establish correspondence between different individual surfaces. The principal component analysis (PCA) applied to all mandible shapes produced a mean model and characteristic models of variation. The cephalometric parameters were measured directly from the mean models to evaluate the 3D shape models. The means of the measured parameters were compared with those from other conventional studies. The male and female 3D statistical mean models were developed from 23 individual mandibles, respectively. Results: The male and female characteristic shapes of variation produced by PCA showed a large variability included in the individual mandibles. The cephalometric measurements from the developed models were very close to those from some conventional studies. Conclusion: We described the construction of 3D mandibular shape models and presented the application of the 3D mandibular template in cephalometric measurements. Optimal reference models determined from variations produced by PCA could be used for craniofacial patients with various types of skeletal shape.