Conceptual Study for Tissue-Regenerative Biodegradable Magnesium Implant Integrated with Nitric Oxide-Releasing Nanofi bers

Jin‑Kyung Jeon,Hyunseon Seo,Jimin Park,Soo Ji Son,Yeong Rim Kim,Eun Shil Kim,Jong Woong Park,Woong‑Gyo Jung,Hojeong Jeon,Yu‑Chan Kim,Hyun‑Kwang Seok,Jae Ho Shin,Myoung‑Ryul Ok 대한금속·재료학회 2019 METALS AND MATERIALS International Vol.25 No.4

The excessive initial corrosion rate of Mg is a critical limitation in the clinical application of biodegradable Mg implantsbecause the device loses its fi xation strength before the fractured bone heals. This study suggests a new approach to overcomethis hurdle by accelerating tissue regeneration instead of delaying the implant biodegradation. As angiogenesis is anessential process in early bone regeneration, a Mg implant coated with electrospun nanofi bers containing nitric oxide (NO),which physiologically promotes angiogenesis, is designed. The integrated device enables adjustable amounts of NO to bestored on the NO donor-conjugated nanofi ber coating, stably delivered, and released to the fractured bone tissue near theimplanted sites. An in vitro corrosion test reveals no adverse eff ect of the released NO on the corrosion behavior of the Mgimplant. Simultaneously, the optimal concentration level of NO released from the implant signifi cantly enhances tube networkformation of human umbilical vein endothelial cells without any cytotoxicity problem. This indicates that angiogenesis canbe accelerated by combining NO-releasing nanofi bers with a Mg implant. With its proven feasibility, the proposed approachcould be a novel solution for the initial stability problem of biodegradable Mg implants, leading to successful bone fi xation.

폴리에스테르 섬유 감량시스템용 프로세서 타이트레이터 개발

조진호,이흥락,이종현,김명남,구성모,김무영,진경찬,유병희,강민수,김국진 경북대학교 센서기술연구소 1993 연차보고서 Vol.1993 No.-

폴리에스테르 섬유 감량시스템의 제어를 위해서는 처리조 내에서 감량되는 섬유가 목표 감량치에 도달했는지를 판단해 주는 장치가 필요하다. 본 연구에서는 가성소다용액의 초농도 및 섬유 감량 정도의 정확한 측정과 감량 종료시간의 산출 및 이에 따른 종료신호를 발생할 수 있는 폴리에스테르 섬유 감량기 전용의 자동적정장치를 개발하였다. To control caustic soda treatment system for the polyester fabric reduction, we need the device to determine that the fabric has been arrived target reduction value. In this study, we develope an automatic process titrator for the caustic soda treatment system. Major functions of the target titrating system are accurate measurements of the caustic soda concentration and then producing the end point signal for caustic soda treatment system.

Fuzzy 목적계수 및 RHS를 갖는 선형계획 문제

진찬용,허철부 明知大學校 經濟硏究所 1989 경영연구 Vol.5 No.1

The purpose of this paper is to study the imprecision in linear programming problem. The imprecision in linear programming problem is classified into tow types. Type one is to deal with the imprecision of objective function coefficients and type two is to deal with the imprecision of RHS. A solution procedure is proposed for this two types using the fuzzy approach which has become accepted as a tool for dealing with a certain form of imprecision inherent to multiobjective decision making environment.

SVD 알고리즘 및 HMM을 이용한 얼굴 및 눈 패턴 검출

진경찬,김명남,신장규,손병기,조진호 경북대학교 센서기술연구소 1998 센서技術學術大會論文集 Vol.9 No.1

The studies about automatic pattern detection of the eye and face from the human image acquired by the CCD image sensor have good applicabilities in the industry, home automation, and data communication field. In general, pattern detection method consists of feature based matching and template matching. In feature based matching, the feature vector is extracted with DLM(dynamic linking matching), EBGM(elastic bunch graph matching), HMM(hidden markov model) matching and knowledge based matching using statistical characteristics. In template matching, in general, the template vector is extracted with PCA(principal component analysis). When these method applied in the face and eye detection, each method has its own merits and some disadvantage. Therefore, by combined utilization of SVD(singular value decomposition) and HMM algorithm, is expected that we can selectively make use of each methods advantage and it result in improved detection accuracy. In this paper, we proposed the method for face and eye detection, which was combined by the two algorithms, to be suitable for the high speed image processing using DSP chip or microprocessor. In the beginning, template matching was followed by a template extraction using batch SVD algorithm and then face pattern was classified and recognized by HMM algorithm which is one of feature based matching technique. Finally, eye pattern detection was performed by pattern search neural network utilizing eigeneye image.

한국형 후각검사 KVSS Test의 개발

홍석찬,유영석,김은서,김석천,박수홍,김진국,강성호 대한이비인후과학회 1999 대한이비인후과학회지 두경부외과학 Vol.42 No.7

근관확대 및 세척 주사바늘의 근관 내 위치가 치근단 3 mm 부위의 근관 세정에 미치는 영향

문호진,홍찬의 大韓齒科保存學會 2012 Restorative Dentistry & Endodontics Vol.37 No.1

Objectives: The aim of this study was to test the hypothesis, that the effectiveness of irrigation in removing smear layer in the apical third of root canal system is dependent on the depth of placement of the irrigation needle into the root canal and the enlargement size of the canal. Materials and Methods: Eighty sound human lower incisors were divided into eight groups according to the enlargement size (#25, #30, #35 and #40) and the needle penetration depth (3 mm from working length, WL-3 mm and 9 mm from working length, WL-9 mm). Each canal was enlarged to working length with Profile.06 Rotary Ni-Ti files and irrigated with 5.25% NaOCl. Then, each canal received a final irrigation with 3 mL of 3% EDTA for 4 min, followed by 5 mL of 5.25% NaOCl at different level (WL-3 mm and WL-9 mm) from working length. Each specimen was prepared for the scanning electron microscope (SEM). Photographs of the 3mm area from the apical constriction of each canal with a magnification of ×250, ×500, ×1,000, ×2,500 were taken for the final evaluation. Results: Removal of smear layer in WL-3 mm group showed a significantly different effect when the canal was enlarged to larger than #30. There was a significant difference in removing apical smear layer between the needle penetration depth of WL-3 mm and WL-9 mm. Conclusions: Removal of smear layer from the apical portion of root canals was effectively accomplished with apical instrumentation to #35/40 06 taper file and 3 mm needle penetration from the working length.

오존노출이 실험적으로 유발된 알레르기성 비염에 미치는 영향

전우진,변상내,김용민,김병국,나기상,박찬일 대한이비인후과학회 2000 대한이비인후과학회지 두경부외과학 Vol.43 No.11

자가 산부식 프라이머 시스템 사용시 인산에 의한 부가적인 산부식이 미세누출에 미치는 영향

윤정진,민경산,홍찬의 大韓齒科保存學會 2003 Restorative Dentistry & Endodontics Vol.28 No.5

The purpose of this study is to evaluate the effect of additional enamel etching with phosphoric acid on the microleakage of the adhesion of self-etching primer system. Class V cavity(4mm × 3mm × 1.5mm) preparations with all margins in enamel were prepared on buccal surface of 42 extracted human upper central incisor teeth. Prepared teeth were randomly divided into 3 groups. Group 1:no additional pretreatment with 37% phosphoric acid (NE). Group 2:additional pretreatment with 37% phosphoric acid for 10 seconds (E10s). Group 3:additional pretreatment with 37% phosphoric acid for 20 seconds (E20s). The adhesives(Clearfil SE Bond, Kuraray, Osaka, Japan) and composite resins(Clearfil AP X, Osaka, Kuraray, Japan) were applied following the manufacturer's instructions. All the specimens were finished with the polishing disc(3M dental product, St Paul, MN, USA), thermocycled for 500 cycles between 5℃ and 55℃ and resected apical 3mm root. 0.028 stainless steel wire was inserted apically into the pulp chamber of each tooth and sealed into position with sticky wax. Surrounding tooth surface was covered with a nail varnish 2 times except areas 1mm far from all the margins. After drying for one day, soaked the samples in the distilled water. Microleakage was assessed by electrochemical method(System 6514, Electrometer, Keithley, USA) in the distilled water. In this study, the microleakage was the lowest in group 1 (NE) and the highest in group 3(E20s)(NE<E1Os<E20s). But no statistically significant differences were found(p =0.5) On the basis of findings from this experiment, it can be concluded that additional enamel etching has nc influence on the microleakage of the adhesion of self etching primer system.

唐宗海의 脾胃에 대한 醫學觀 硏究 : 『中西匯通醫經精義』와『血證論』을 중심으로

허종찬,원진희,문구 한국전통의학연구소 2006 한국전통의학지 Vol.15 No.1

Dang, jonghae had written five books on chinese medicine,『Hyeoljeungrn』is his most important work. He wanted to correct the fallacies of the theory of Jang(臟) and Bu(腑) by comparing with chinese and western medicine. He distinguished Bi(脾) from Cheomyuk(甛肉) by comparing the spleen with the pancreas. He recognized Stomach as the warehouse of foods, and explained that Bi took charge of digestion actually. Bi charged the function of Transportation(運化) and Blood-govering(統血) in addition to plain digestion, he wrote. Dang, jonghae regarded the metabolism of the human body as the interaction of Gi(氣), Blood(血), Water(水) and Fire(火). And he explained that Bi adjusted them. He classified Syndrome of Blood(血證) into five sorts of syndrome and presented four kinds of treatment. Especially he took a serious view of the treatment connected with Bi and Stomach. He set up the theory of Bi and Stomach(脾胃論) practically on basis of anatomy, but he didn't assorted the physiology and pathology of each organ clearly. However he proved the importance of Bi and Stomach by treating Syndrome of Blood and provided with the foundation of merging chinese and western medicine.

ATSC 비디오 테스트를 위한 최적화질 구현

한찬호,윤태진,장주석 경운대학교 산업기술연구소 2002 産業技術硏究論文誌 Vol.5 No.1(B)

ATSC test pattern for evaluating the image quality of ATSC display system has high quality and high compression rate. In this paper, we implemented ATSC test pattern that has high quality and high compression rate by minimizing the number of DCT coefficients block data. To minimize this DCT coefficients, the proposed test pattern is optimized for partition of DCT block. To test variable image quality of ATSC display system, quantization error and display test pattern is included the ATSC test pattern.