HVPE 법을 통한 GaN 성장 시 기판 종류 및 V/III 비에 따른 잔류 stress 특성 연구

이주형,이승훈,이희애,강효상,오누리,이성철,이성국,박재화,Lee, Joo Hyung,Lee, Seung Hoon,Lee, Hee Ae,Kang, Hyo Sang,Oh, Nuri,Yi, Sung Chul,Lee, Seong Kuk,Park, Jae Hwa 한국결정성장학회 2020 한국결정성장학회지 Vol.30 No.2

본 연구에서는 HVPE 성장법으로 GaN 성장 시 GaN 내에 잔류하는 stress로 인한 crack 현상을 감소시키고자 기판 종류 및 V/III 비를 조절하여 잔류 stress 특성을 알아보고자 하였다. Sapphire, GaN template 위에 각각 V/III 비 5, 10, 15의 조건으로 GaN을 성장시켜 형성된 hexagonal pit의 분포 및 깊이를 분석하였다. 이를 통해 GaN on GaN template 성장에서 V/III 비가 높을수록 hexagonal pit의 분포 영역 및 깊이가 증가하는 것을 확인하였다. Raman 측정을 통해 hexagonal pit 영역 및 깊이가 컸던 GaN on GaN template 성장에서 V/III 비가 높을수록 stress가 감소하는 것을 확인하였다. 이를 통해 hexagonal pit의 분포 및 깊이가 증가할수록 잔류 stress가 낮아짐을 확인할 수 있었으며, 향후 후막 GaN 성장 시 stress 감소 가능성에 대해 확인하였다. The characteristics of the residual stress on the types of the substrate was investigated with adjusting the V/III ratio during GaN growth via the HVPE method. GaN single crystal layers were grown on a sapphire substrate and a GaN template under the conditions of V/III ratio 5, 10, and 15, respectively. During GaN growth, multiple hexagonal pits in GaN single crystal were differently revealed in accordance with growth condition and substrate type, and their distribution and depth were measured via optical microscopy(OM) and white light interferometry(WLI). As a result, it was confirmed that the distribution area and depth of hexagonal pit tended to increase as the V/III ratio increased. Moreover, it was found that the residual stress in GaN single crystal decreased as the distribution area and depth of the pit increased through measuring micro Raman spectrophotometer. In the case of GaN growth according to substrate type, the GaN on GaN template showed lower residual stress than the GaN grown on sapphire substrate.

이미지 데이터를 모니터링하는 관리도에서 이미지와 ROI 크기 조정의 영향

이주형,윤형욱,이성민,이재헌,Lee, JuHyoung,Yoon, Hyeonguk,Lee, Sungmin,Lee, Jaeheon 한국통계학회 2017 응용통계연구 Vol.30 No.3

A machine vision system (MVS) is a computer system that utilizes one or more image-capturing devices to provide image data for analysis and interpretation. Recently there have been a number of industrial- and medical-device applications where control charts have been proposed for use with image data. The use of image-based control charting is somewhat different from traditional control charting applications, and these differences can be attributed to several factors, such as the type of data monitored and how the control charts are applied. In this paper, we investigate the adjustment effect of image size and region of interest (ROI) size, when we use control charts to monitor grayscale image data in industry. 최근 산업의 생산공정에서는 머신비전시스템을 통하여 제품의 품질특성치에 대한 정보를 이미지 데이터로 제공하는 경우가 많다. 따라서 산업과 의학 현장에서 이미지 데이터의 모니터링을 위해 관리도 절차의 필요성이 많이 대두되고 있다. 이미지 데이터를 모니터링하는 관리도 절차는 전통적으로 사용하는 관리도 절차와 유사한 점도 있지만, 데이터의 구조를 비롯하여 각 이미지에서 ROI를 설정하여 관리도 절차를 적용하는 등 서로 다른 점도 많이 있다. 이 논문에서는 생산공정에서 제공되는 이미지 데이터에 대해 관리도를 사용하는 절차를 소개하고, 이미지 또는 ROI 크기의 확대와 축소가 제품의 이상원인을 탐지하는데 어떠한 영향이 주는지를 모의실험을 통하여 알아보았고 각 관리도의 성능 또한 비교하였다.

팩시밀리의 발전 현황과 전망

이주형,Lee, Ju-Hyeong 한국전자정보통신산업진흥회 1987 電子振興 Vol.7 No.6

첨단 통신기기의 발전과 대응

이주형,Lee, Ju-Hyeong 한국전자정보통신산업진흥회 1986 電子振興 Vol.6 No.7

Locator attachment를 이용한 하악 임플란트 유지형 피개의치의 임상적 평가

이주형,손동석,Lee, Ju-Hyoung,Sohn, Dong-Seok 대한치과보철학회 2011 대한치과보철학회지 Vol.49 No.4

연구 목적: 현대의학의 발달로 평균 수명이 증가하고 고령의 환자가 늘어남에 따라 무치악 환자의 비율도 증가하고 있다. 특히 심하게 흡수된 하악골에선 기존의 총의치로는 환자가 사용하기에 유지, 지지의 부족으로 사용상에 어려움이 있다. 하악에 2개의 임플란트 식립하여 피개의치를 제작하면 환자에게 좀 더 사용하기가 편한 의치를 제작해 줄 수 있다. 간단한 보철과정과 추후 수리가 쉽다는 이유로 현재 Locator가 보편적인 유지장치로 사용되고 있다. Locator를 이용한 하악 임플란트 유지 피개의치에서 임플란트와 보철물의 장기적인 성공률을 알아보았다. 연구 재료 및 방법: 대구가톨릭대학병원 치과 구강외과에서 2004년부터 2010년까지 총 10명의 환자(남 4명, 여 6명)의 하악에 2개의 임플란트(총 20개)를식립후Locator를 이용한 조직-유지 피개의치를 하였다. 본 연구는 최근 7년간 시술된 10명의 환자들을 대상으로 진료 기록부를 조사하고 방사선 사진을 계측하여 후향적 임상연구를 하였으며, 임플란트의 생존률 및 보철적인 합병증에 대해 알아보았다. 결과:임플란트는 100%의 누적 성공률을 보였고, 1년후(평균 58주) 방사선 사진에서 임플란트는 평균 1.03 mm ${\pm}$ 0.20 mm의 골소실을 보였으며, 임플란트의 기능에는 이상을 보이지 않았다. 피개의치는 의치파절, 의치상 이장 또는 개상, 메일의 탈락 또는 유지력 감소로 인한 메일 교체 등 다양한 합병증을 보였다. 그러나 의치상 이장 및 개상, 메일 인써트의 간단한 교체로 인해 장기적으로 임플란트 및 임플란트 유지 피개의치가 환자에게 유지되고 있었다. 결론: 하악 전방부위에 임플란트 2개를 식립 후 Locator를 이용한 임플란트 유지 하악 피개의치는 최소침습적인 수술, 간단한 보철 과정 및 수리 과정의 장점으로 인해 장기적으로 안정적인 치료법으로 사료된다. Purpose: This study compared the marginal bone loss around dental implant that were placed in the canine areas of the mandibles and finded the survival rate of implants, marginal bone loss around implants and prosthetic complications in 10 patients treated with overdentures retained with Locator attachments. Materials and methods: Ten patients who had received implant retained overdentures in the mandibules using two implants and Locator attachments at Daegu Catholic University Medical Center from 2004 to 2010 were included in this study. Evaluations of the survival rate of implants, marginal bone loss and prosthetic complications were performed. Results: Implants placed in this study showed a 100% survival rate and the average annual bone loss was 1.03 mm ${\pm}$ 0.20 mm in the first year. The patients have verbally indicated that they are comfortable and that their overdentures function well. But, implant retained overdentures had various prosthetic complications such as male change, relining, rebasing and denture fracture. Conclusion: Implant retained overdentures using two implant and Locator attachments in the fully edentulous mandibles is considered as a stable way for long terms because of minimal invasive operation, simple prosthetic process and easy repair.

Sn-Zn 공정합금의 응고속도에 따른 조직과 기계적 성질에 관한 연구

이주형,이계완 ( J . H . Lee,K . W . Lee ) 한국주조공학회 1985 한국주조공학회지 Vol.5 No.4

The structures and mechanical properties of undirectionally solidified Sn-Zn eutectic alloys have been examined over the growth range 7㎜/h to 6,000㎜/h. The structures of undirectionally solidified Sn-Zn eutectic alloys were primarily broken-lamellar at growth rates below 760㎜/h and became fibrous at higher growth rates above that. At a growth rate 3,084㎜/h the structures were fibrouse only. There is no dendrites at any growth rates, but occasionally ribbon-like morphologies were seen. The under cooling increased parabolically with growth rate increase. The hardness of specimes increased with growth rates increase but heat-treated specimen decreased after growth rates 760㎜/h and became constant value. The effect of heat-treatment was good at lower growth rate. At room temperature tensile strength increased with growth rates up to R=990㎜/h and then tensile strength became near-constant value. The effect of heat-treatment was well at lower growth rate.

주택규모 선택에 영향을 미치는 가구원수별 특성에 관한 연구

이주형,임종현,강남훈,Lee, Joo-Hyung,Lim, Jong-Hyun,Kang, Nam-Hoon 한국주거학회 2010 한국주거학회 논문집 Vol.21 No.2

The housing market requires customized housing to be supplied according to the various characteristics of households. Multinominal Logistic Regression was used to analyze the effects of variables of household characteristics according to the number of family members on the choice of housing size in the scope of the whole country's housing market. Analysis showed that the number of family members has its own characteristics. When a household has a smaller number of family members, there are more variables affecting choice of housing size. Living and housing expenses variables served as significant variables that affect all household types. Results showed that households with more living and housing expenses are more likely to choose a large sized house and where households have a greater number of family members, there is more influence on that choice. The age of the householder was only found to be a meaningful variable in 1-2 person households and 3-4 person households, particularly in the choice of a small or large sized house. This shows that the age of the householder does not play an important role in choosing medium sized houses for households of under 4 people, but affects the choice of small and large sized houses. The academic ability of household members also served as a significant variable. While 1-2 person households with high academic ability tend to select a large sized house, 3-4 person households with high academic ability tend to select a small sized house. It is observed that members of both 1-2 person households and 3-4 person households tend to select their house between a large sized house and a small sized house in order to own their own houses. The result of this research suggests that there are various and detailed variables on the choice of housing size. Especially, a notable result is that household characteristics more significantly affect the housing size choice of 1-2 person households, while the trend of an aging society will more significantly affect a 3-4 person households' choice of a large sized house. Therefore, a study on the choice of housing size according to characteristics of elderly households and 1-2 person households should be continually analyzed.

퍼스컴에 의한 LAN의 구축과 OA의 전개

이주형,Lee, Ju-Hyeong 한국전자정보통신산업진흥회 1984 電子振興 Vol.4 No.4

3차원 PCB 채널내에서의 복사-혼합대류 열전달 특성

이주형,박경우,박희용,Lee, J.H.,Park, K.W.,Pak, H.Y. 대한설비공학회 1996 설비공학 논문집 Vol.8 No.4

The interaction of turbulent mixed convection and surface radiation in a three-dimensional channel with the heated blocks is analyzed numerically. Two blocks are maintained at high temperature and the other bottom and horizontal walls are insulated. S-4 method is employed to calculate the effect of the radiative heat transfer. The low Reynolds number k-$\varepsilon$ model proposed by Launder and Sharma is used to estimate the turbulent influence on the heat transfer enhancement. From above modeling, the effects of various channel specifications on the flow and heat transfer characteristics are investigated. The variables used for the present study are Reynolds number, block spacing, the channel height spacing for block and the emissivity. Average Nusselt numbers along the block surfaces are correlated and presented in terms of Reynolds number, emissivity and dimensionless geometric parameters. For the range of conditions in this study, average Nusselt numbers along the block surfaces are strongly influenced by the Reynolds numbers and channel height spacing for block but weakly influenced by the block spacing and the emissivity of the adiabatic walls.

보령댐 가뭄 대응을 위한 수자원시스템 모델 적용 사례

이주형,김연주,김기주,Lee, Ju-Hyeong,Kim, Yeon-Ju,Kim, Gi-Ju 한국수자원학회 2022 물과 미래(한국수자원학회지) Vol.55 No.9