양성자 주입 기술을 이용한 초고속 회복 다이오드의 제작

이강희,김병길,이용현,백종무,이재성,배영호,Lee, Kang-Hee,Kim, Byoung-Gil,Lee, Yong-Hyun,Baek, Jong-Mu,Lee, Jae-Sung,Bae, Young-Ho 한국전기전자재료학회 2004 전기전자재료학회논문지 Vol.17 No.12

Proton irradiation technology was used for the improvement of power diode switching characteristics. Proton irradiation was carried out at the energies of 2.32 MeV, 2.55 MeV, 2.97 MeV so that the projection range of irradiated proton would be at the metallurgical junction, depletion region and neutral region of pn diode, respectively. Dose conditions were varied into three conditions of 1${\times}$10$^{11}$ cm$^{-2}$ , 1${\times}$10$^{12}$ cm$^{-2}$ , 1${\times}$10$^{13}$ cm$^{-2}$ at each condition of energies. Characterization of the device was performed by I-V(current-voltage), C-V(capacitance-voltage) and trr(reverse recovery time) measurement. At the optimum condition of irradiation, the reverse recovery time of device has been reduced about 1/5 compared to that of original un-irradiated device.

공동주택 구성재의 예상수선시기 범위 설정 연구

이강희,Lee Kang-Hee 한국주거학회 2006 한국주거학회 논문집 Vol.17 No.2

Building would be deteriorated with time elapse, influenced by its geographic situation, climate and other environmental conditions. In addition, the systematic maintenance could be provided to keep the resident a recent living condition. The existing breakdown maintenance will be changed into the preventive maintenance. The preventive maintenance is required to get the repair time, the repair scope and frequency. In this paper, it aimed at providing the repair time range over the building components, utilizing the relation between the determination curve and the performance recovery through repair. Results of this study are as follows : First, the forecast of the repair time over the building components could be calculated and equalized with the deterioration and performance degree. Second, the repair time range of building components would be provided into five categories and 3rd repair time. Results of this study will set up the long-term repair plan of building, and finally keep an housing condition comfortable.

강화지역 청소년의 4년간 혈청 지질의 변화와 지속성

이강희,서일,지선하,남정모,김성순,심원흠,하종원,김석일,강형곤,Lee, Kang-Hee,Suh, Il,Jee, Sun-Ha,Nam, Chung-Mo,Kim, Sung-Soon,Shim, Won-Heum,Ha, Jong-Won,Kim, Suk-Il,Kang, Hyung-Gon 대한예방의학회 1997 Journal of Preventive Medicine and Public Health Vol.30 No.1

소아에서부터 청소년기까지 혈청 지질의 지속성(tracking)은 서구에서 행해진 연구들에 의해서 이미 잘 알려져 있으나 국내에서는 이에 관한 연구가 거의 이루어지지 않았다. 본 연구는 우리나라 청소년의 혈청 지질치의 변화를 조사하고 지속성이 있는지를 분석하였다. 연구대상은 경기도 강화군에서 진행하고 있는 강화 아동 혈압 코호트(719명)의 청소년들로 12세, 14세, 16세 세 번에 걸쳐서 공복 후 혈액검사(혈청 총 콜레스테롤, 중성지방, LDL 콜레스테롤, HDL 콜레스테롤을 포함)와 신체계측을 시행하였다. 이 중 3번의 혈액 검사에서 10시간 이상의 공복이 확인된 청소년 309명 (남자 162명, 여자 147명)을 최종 연구대상으로 선정하였다. 연구대상이 된 청소년들과 연구대상에서 제외한 청소년들의 12세때 초기 검사치들을 t 검정을 이용하여 서로 비교한 결과 통계학적으로 유의한 차이는 없었다. 연구방법은 우선 혈청 지질치의 변화양상을 보기 위하여 각 검사 년도간에 반복 측정된 분산분석을 시행하였다. 각 혈청지질의 지속성을 보기 위해서는 첫께, 초기값을 바탕으로 사분위 집단으로 나누어 각 사분위 집단의 혈청지질치가 매 검사 연도마다 어떻게 변하는 지를 그림으로 나타내었다. 둘째, 혈청지질치의 검사 시기사이의 스피어맨 상관계수를 구하였다. 그리고 마지막으로 각 검사 년도의 혈청지질치를 사분위 집단으로 구분하여 초기검사에서 가장 위험도가 큰 집단에 속한 사람들이 지속적으로 위험도가 큰 집단에 속하는 백분율을 계산하였다. 연구결과 남녀 모두 4년간 세 번의 검사에서 혈청 총 콜레스테롤은 남자가 초기검사에서 $160.7{\pm}25.3mg/dl$, 최종 추적검사에서 $150.0{\pm}27.8mg/dl$, 여자가 초기검사에서 $168.8{\pm}29.7mg/dl$, 최종 추적검사에서 $168.8{\pm}29.7mg/dl$, 중성지방은 남자가 $98.0{\pm}45.7mg/dl$에서, $114.1{\pm}67.9/mg/dl$로, 여자가 $109.9\geq37.1mg/dl$에서, $104.9{\pm}47.6mg/dl$로, LDL 콜레스테롤은 남자가 $93.6{\pm}21.2mg/dl$에서, $83.0{\pm}25.0mg/dl$로 여자가 $83.0{\pm}25.0mg/dl$에서, $94.7{\pm}24.4mg/dl$로, HDL 콜레스테롤은 남자가 $47.6{\pm}9.1mg/dl$에서, $44.2{\pm}9.4mg/dl$로, 여자가 $48.8{\pm}10.0mg/dl$에서, $47.8{\pm}11.3mg/dl$ 변화하였다. 반복 측정한 분산분석 결과 남녀 모두 4년 동안 혈청 총 콜레스테롤, LDL 콜레스테롤, HDL콜레스테롤이 통계적으로 유의하게 감소하였다. 특히 남자 LDL 콜레스테롤은 두 번의 추적검사에서 모두 감소한 것으로 나타났다. 중성지방은 남자에서는 지속적으로 증가하였고 여자에서는 변화가 없었다. 같은 연령에서 남녀간의 각 혈청지질치를 비교해보면 중성지방을 제외하고는 모두 여자가 남자보다 더 컸다. 혈청 지질의 초기 검사와 최종 검사간의 스피어맨 상관분석과 각 혈청 지질치의 위험도가 가장 큰 사분위집단에 잔류하는 백분율을 보면 지속성이 존재하였다. 혈청 총 콜레스테롤과 HDL 콜레스테롤에서 각 시기의 검사치들의 상관계수는 남자가 0.6 이상, 여자가 약 0.7 이상이었으며 통계적으로 유의하였다. 첫 번께 검사에서 위험도가 가장 큰 사분위 집단에 속한 사람 중 두 번째 검사에서도 위험도가 가장 큰 사분위 집단에 속한 백분율은 여자의 중성지방(42.9%)을 제외하고는 모두 50%이상이었다. 이들이 세 번째 검사에서도 같은 사분위 집단에 잔류한 백분율은 It has been known that there is a tracking phenomenon in the level of serum lipids. However, no study has been performed to examine the change and tracking of serum lipids in Korean adolescents. The purpose of this study is to examine the changes of serum lipids in Korean adolescents from 12 to 16 years of age, and to examine whether or not there is a tracking phenomenon in serum lipids level during the period. In 1992 serum lipids(total cholesterol(TC), triglyceride(TG), LDL cholesterol(LDL-C), HDL cholesterol(HDL-C)) were measured in 318 males, 365 females who were 12 years of age in Kangwha county, Korea. These participants have been followed up to 1996 and serum lipids level were examined in 1994 and 1996. Among the participants 162 males and 147 females completed all three examinations in fasting state. To examine the effect of eliminating adolescents with incomplete data, we compared serum lipids, blood pressure and anthropometric measures at baseline between adolescents with complete follow-up and adolescents who were withdrawn. To examine the change of serum lipids we compared mean values of serum lipids according to age in males and females. Repeated analysis of variance was used to test the change according to age. We used three methods to examine the existence of tracking. First, we analyzed the trends in serum lipids over 4-year period within quartile groups formed on the basis of the first-year serum lipids level to see whether or not the relative ranking of the mean serum lipids among the quartile groups remained in the same group for 4-year period. Second, we quantified the degree of tracking by calculating Spearman's rank correlation coefficient between every tests. Third, the persistence extreme quartile method was used. This method divides the population into quartile groups according to the initial level of blood lipids and then calculates the percent of the subjects who stayed in the same group at follow-up measurement. The decreases in levels were noted during 4 years for TC, LDL-C, primarily for boys. The level of HDL-C decreased between baseline and first follow-up for both sexes. Tracking, as measured by both correlation coefficients and persistence extreme quartiles, was evident for all of the lipids. The correlation coefficients of TC between baseline and 4 years later in boys and girls were 0.55 and 0.68, respectively. And the corresponding values for HDL-C were 0.58 and 0.69. More than 50% of adolescents who belonged to the highest quartile group in TC, HDL-C and LDL-C at the baseline were remained at the same group at the examination performed 2 years later for both sexes. The probabilities of remaining at the same group were more than 35% when examined 4 years later. The tracking phenomenon of TG was less evident compared with the other lipids. Percents of girls who stayed at the same group 2 years later and 4 years later were 42.9% and 25.7%, respectively. It was evident that serum lipid levels tracked in Korean adolescents. Researches with longer follow-up would be needed in the future to investigate the long-term change of lipids from adolescents to adults.

공동주택 구성재의 내용년수 산정방법에 관한 연구

이강희,장정희,채창우,Lee Kang-Hee,Chang Jung-Hee,Chae Chang-U 한국주거학회 2005 한국주거학회 논문집 Vol.16 No.5

The performance of building should be deteriorated with time while the building would maintain and manage the function and performance to get a living condition. For the efficient maintenance of the building, the repair cycle would be provided and applied during the service-life time. The service-life time of the building components would be needed to determine the repair time and the repair scope. The service-life time of the building components would be calculated with the 1st repair time and the recovery rate of the performance, considering the recovery rate after repaired. In this paper, the 1st repair time would be estimated with the normal probability distribution, choice probability and 3rd quadratic function. The recovery rate of the building components assumes various level according to the research target and utility area. The results of this study are as follows ; first, most of the components of the building work would range about 30 years in the service-life time and the components of the mechanical works range from 28 years to 37 years, those of the electrical works would be about 31 years.

Prostaglandin E₂가 치아이동과 치근흡수에 미치는 영향에 관한 연구

이강희,서정훈,Lee, Gang-Hee,Suhr, Cheong-Hoon 대한치과교정학회 1989 대한치과교정학회지 Vol.19 No.2

This experiment was performed to study the effect of prostaglandin $E_2$ on tooth movement and root resorption in orthodontically treated cats. Twenty five cats were divided into five groups and closed coil springs delivered 80gm were stretched between upper canine and 3rd premolar. $10{\mu}g$ of $PGE_2$ was injected locally in the submucosal area of the upper right canine, while the left side served as a control and was injected saline 0.1ml. The distance between canine tip and central cusp tip of the 3rd premolar was measured. Scanning electron photomicrographs were made of the coronal half of the distal root surface of canines and cemental craterings were observed and quantified using point-counting volumetry. Data were analyzed by 2-way ANOVA and paired t-test. The results were as follows: 1. The rate of tooth movement of the $PGE_2$ side was increased, particularly at 1 day, compared with the control side. 2. The rate of tooth movement was minimum from 7 days to 10 days. 3. The resorption of root surface of the $PGE_2$ side was decreased from 4 days to 10 days, compared with the control side.

교육시설의 옥상방수 열화도 진행 모델에 관한 연구

이강희,채창우,류수훈,Lee, Kang-Hee,Chae, Chang-U,Ryu, Soo-Hoon 한국교육시설학회 2017 敎育施設 Vol.24 No.6

Education facilities have much affect to make a good condition for the learning environment. Therefore, various approaches have been conducted to improve the physical, social and educational achievement. Especially, the physical aspect is very important to get rid of the building defect and improve the student their learning environment. For these, it needs to explain the performance and function of components and materials, which is linked with the deterioration degree. The deterioration degree is a imperative factor to make a decision whether the component would be repaired or not and to provide the repair scope of its component. In this paper, it aimed at making the deterioration degree model of roof proof under the hypothesis of which deterioration degree would be equal the repair cost at this time. Results of the study are shown that first, the $3^{rd}$ function is most proper to explain the deterioration degree model among 11 functions in view of resulted statistics. Second, the inflection of deterioration is shown at 15yr of the elementary school and 13yr of the middle and high school. This study has a limit of disclassification of the component or materials and it is, therefore, favorable to include the classification of waterproof material and work. These results would make a change from the breakdown maintenance to preventive maintenance and give a decent the learning environment for student.

공동주택의 관리비 추정모델 연구

이강희,양재혁,채창우,Lee, Kang-Hee,Yang, Jae-Hyuk,Chae, Chang-U 한국주거학회 2010 한국주거학회 논문집 Vol.21 No.2

The maintenance cost plays a important role to plan the scale of the apartment housing such as a number of household, building area and building type. Therefore, it is required to forecast the cost considering various maintenance characteristics. The maintenance characteristics are floor area, number of household, heating type, site area and etc.. In addition, the maintenance cost are classified into 5 area. These are a personal expense, facility maintenance cost, energy and water cost, insurance and sanitary cost. These five cost area are related with various characteristics and brought up the estimation model using the stepwise multiple regression analysis. The energy and heating cost share over the 50% in the total cost and the personal expense cost shares about 40%. The personal expense cost per area is 5,272 won/$m^2{\cdot}yr$ irregardless of heating type and the district heating type is a higher cost than other type. In facility maintenance cost, the central heating type is 2,015 won/$m^2{\cdot}yr$ and higher than other type. The estimation models have good statistics in each model. Most of the model have a determination coefficient over 0.7 and Durbin Watson value between 1.5 and 2.5.

핵연료집합체 기계적특성 시험시설 구축과 기능시험

이강희,강흥석,윤경호,양재호,Lee, Kang-Hee,Kang, Heung-Seok,Yoon, Kyung-Ho,Yang, Jae-Ho 한국압력기기공학회 2016 한국압력기기공학회 논문집 Vol.12 No.1

Fuel assembly's mechanical characterization test facility (FAMeCT) in KAERI was constructed with upgraded functional features such as increased loading capacity, underwater vibration testing and severe earthquake simulation for extended fuel design guideline. This facility is designed and developed to provide out-pile fuel data for accident analysis model and fuel licensing. Functional tests of FAMeCT were performed to confirm functionality, structural integrity, and validity of newly-built fuel assembly mechanical test facility. Test program includes signal check of data acquisition system, load delivering capacity using real-sized fuel assemblies and a standard loading cylindrical rigid specimen. Fuel assembly's lateral bending test was carried out up to 30 mm of pull-out displacement. Limit case axial compression loading test up to 33 kN was performed to check structural integrity of UCPS (Upper Core Plate Simulator) support frame. Test results show that all test equipment and measurement system have acceptable range of alignment, signal to noise ratio, load carrying capacity limit without loss of integrity. This paper introduces newly constructed fuel assembly's mechanical test facility and summarizes results of functional test for the mechanical test equipment and data acquisition system.

Electrochemical Machining of Tungsten Carbide Microshaft

이강희,Lee, Kang-Hee The Korean Society of Manufacturing Technology Eng 2010 한국공작기계학회지 Vol.19 No.3

본 연구에서는 전해가공을 이용해서 직경이 균일한 텅스텐 카바이드 미세축을 제작하는 실험을 수행하였다. 전해가공을 통해 미세축으로 사용 가능한 형상을 얻기 위한 최적의 가공 조건에 대해 고찰하였다 이 과정에서 미세축의 형상에 영향을 주는 여러 인자들을 적절하게 조절하여 최적의 형상을 얻을 수 있었다. 그리고 가공된 미세축을 이용하여 적절한 조건으로 2차, 3차 가공을 수행하여 초미세축을 가공할 수 있음을 보였다. 그리하여 실험 결과 직경 $30{\mu}m$, 길이 $500{\mu}m$의 텅스텐 카바이드 미세축을 제작하였다. Tungsten carbide microshaft is used as micro punch, electrode of micro electro discharge machining, and micro tool because of its high hardness and rigidity. In this research, tungsten carbide microshaft was fabricated using electrochemical machining. $H_2SO_4$ solution was used as the electrolyte because it can dissolve tungsten carbide and cobalt simultaneously. Experimentally studied were the effects of electrolyte concentration, machining time, and machining voltage on material removal rate and the shape of the microshaft. To eliminate the effects of bubbles and metal corrosion layer on microshaft shape, the machining was performed below the electrolysis voltage. Three step electrochemical process was suggested to fabricate the straight tungsten carbide microshaft. As a result, a straight tungsten carbide microshaft of $30{\mu}m$ in diameter and $500{\mu}m$ in length was obtained through the proposed three step electrochemical process.

공동주택의 관리비 증감특성 연구

이강희,채창우,박근수,Lee, Kang-Hee,Chae, Chang-U,Park, Guen-Soo 한국주거학회 2011 한국주거학회 논문집 Vol.22 No.6

The maintenance cost depends on various factors such as building volume, floor area, number of household and so on. The maintenance cost of the apartment housing is affected by the maintenance type, building physical factor, sociogeographic aspects. Among these, the maintenance characteristics is represented and made up by the total floor area and number of household which means main factor to provide the building scale roughly. In this paper, it aimed at modelling the estimation function of the maintenance cost with the total floor area and number of household and analyzing the elasticity of the two factors. Although items of maintenance cost are various in general cost, repair cost and so on, we classified these items into the 5 categories. 5 categories are a general cost, a facility maintenance cost, a utilization cost, insurance and sanitary cost. The estimation function used a power function and it has better goodness-offitness than any other estimation methods in statistics. A power function has a three curve types with concave and convex and linear style to the origin.