http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
뇌파 신호의 카오스 특징 추출을 위한 통합 시스템의 개발
우용호,김현술,최윤호,박상희,김택수 연세대학교 산업기술연구소 1995 논문집 Vol.27 No.1
In this paper, an integrated chaos analysis system for EEG (ICASE) is designed for the analysis of brain functions based on the chaos theory. Nonlinear dynamic characteristics of EEG such as 3-D attractor, Poincare section, correlation dimension, Lyapunov exponents and power spectrum are extracted by this system. The results show that chaotic attractors which indicate the presence of deterministic dynamics of complex nature could be identified nature could be identified from a routine EEG recording for normal and pathological activity. This proves that the chaotic analysis of EEG may be an appropriate tool in the classification of brain activity and thus a possible diagnostic tool.
유기태양전지를 위한 작은 밴드갭 고분자의 합성과 광전특성
우용호(Yong-Ho Woo),이효상(Hyo-Sang Lee),박성남(Sungnam Park),최이준(E-Joon Choi),김봉수(BongSoo Kim) 한국고분자학회 2015 폴리머 Vol.39 No.1
본 연구에서는 전자가 풍부한 구조단위(dithienosilole 및 benzodithiophene)와 전자가 부족한 구조단위(difluorobenzothiadiazole)를 주사슬에 교대로 갖는 작은 밴드갭 공중합체를 Stille 짝지움 반응을 이용하여 합성하였다. 1H NMR을 통하여 각 단계별 화합물과 고분자의 구조를 확인하였다. GPC, TGA, UV-vis 분광분석기 및 cyclic voltammetry를 이용하여 합성한 고분자의 특성을 조사하였다. 합성한 공액고분자와 PC70BM을 1:1.5, 1:2, 1:3, 1:3.5 및 1:4의 중량비로 혼합하여 ITO/PEDOT:PSS/polymer:PC70BM/Al의 구조로 유기태양전지 소자를 제작하여 그 광전 특성을 조사하였다. 고분자:PC70BM의 혼합비율이 1:3에서 최고 1.0%의 광전변환효율이 달성되었다. TEM 실험을 통하여 1:3 혼합비율에서 유기태양전지에 가장 적합한 나노규모로 상분리가 일어났으며, 다른 혼합비율에서는 고분자와 PC70BM의 뭉침현상에 기인하여 태양전지 특성이 낮아졌다. We synthesized a low band gap alternating copolymer containing electron-rich units (i.e. dithienosiloles and benzodithiophenes) and electron-deficient units (i.e. difluorobenzothiadiazoles) for high performance organic solar cells. The polymer was prepared by the Stille coupling reaction and characterized using <SUP>1</SUP>H NMR, GPC, TGA, UV-visible absorption spectroscopy, and cyclic voltammetry. Solar cells were fabricated in a structure of ITO/PEDOT:PSS/polymer: PC70BM/Al with five different blending ratios of polymer and PC70BM (1:1.5, 1:2, 1:3, 1:3.5 and 1:4 by weight ratio). The best efficiency was achieved from the 1:3 ratio of polymer and PC70BM in the photoactive layer, and TEM revealed that there is an optimal nanoscale phase separation between polymer and PC70BM in the 1:3 ratio blend film.
2 Hall-ICs를 이용한 Slotless PM Brushless DC Motor의 정밀속도제어를 위한 PLL 제어방식
우무선(M.S. Woo),윤용호(Y.H. Yoon),이태원(T.W. LEE),원충연(C.Y. Won),최유영(Y.Y. Choe) 전력전자학회 2004 전력전자학술대회 논문집 Vol.- No.-
Generally, Slotless PM BLDC drive system is necessary that the three Hall-ICs evenly be distributed around the stator circumference and encoder be installed in case of the 3 phase motor. So, the Hall-ICs are set up in this motor to detect the main flux from the rotor, and the output signal from Hall-ICs is used to drive a power transistor to control the winding current. However, instead of using three Hall-ICs and encoder, we used only two Hall-ICs for the permanent magnet rotor position and for the speed feedback signals, and also for a microcontroller of 16-bit type (80C196KC) with the 3 phase Slotless PM BLDC whose six stator and two rotor designed. Two Hall-IC Hc and HB are placed on the endplate at 120 degree intervals, and with these elements, we can estimate information of the others phase in sequence through a rotating rotor.
2Hall-ICs를 이용한 저가형 PM Brushless DC Motor 속도 제어
윤용호,우무선,김덕규,원충연,최유영 전력전자학회 2004 전력전자학회 논문지 Vol.9 No.4
Generally, PM BLDC drive system is necessary that the three Hall-ICs evenly be distributed around the stator circumference and encoder installed in case of the 3 phase motor. The Hall-ICs are set up in this motor to detect the main flux from the rotor. So the output signal from Hall-ICs is used to drive a power transistor to control the stator winding current. Instead of using three Hall-ICs and encoder, this paper uses only two Hall-ICs for the permanent magnet rotor position and for the speed feedback signals, and uses a micro controller of 16-bit type(80C196KC) with the 3 phase PM BLDC whose six stator and two rotor designed. Two Hall-IC Hc and HB are placed on the endplate at 120 degree phase difference. With these elements, we estimate information of the other phase in sequence through a rotating rotor. 최근 각종 산업기기 및 자동화기기에는 회전자가 영구자석으로 구성된 브러시리스 전동기의 사용이 증가하고 있다. 그러나 회전자가 영구자석으로 이루어진 BLDC 전동기의 경우 회전자 위치 판별 센서는 필수 요소이다. 그러나 센서(엔코더, 레졸버등)를 사용할 경우 크기 증가, 비용 상승 등의 원인으로 작용한다. 따라서 본 논문에서는 PM BLDC 전동기의 속도제어를 수행함에 있어 기존의 엔코더와 Hall-IC 3개를 이용하지 않고, 두개를 이용하여 회전자의 위치를 판별함과 동시에 속도 센서를 대신하여 사용할 수 있는 방법을 제안하였다. 그 결과 성능은 동일하고, 구동회로의 크기와 제조 단가를 낮출 수 있는 효과를 얻었다.