http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
양규석,권대혁,남기홍,손병기 경북대학교 센서기술연구소 1994 센서技術學術大會論文集 Vol.5 No.1
A new FET type pressure sensor has been investigated to overcome the problems of the conventional silicon piezoresistive and capacitive pressure sensor. The PSFET( pressure sensitive field effect transistor) is a new FET type pressure sensor which the operation theory is combined with the field effect of MOSFET and the piezoelectric effect of piezoelectric thin films. This sensor can overcome the fabrication problems of conventional silicon pressure sensors and realize productivity, standardization, miniaturization, integration because the whole fab. process is compatible to the planar technology. A ZnO thin film as a piezoelectric material, 5000Å thick, was deposited on a FET gate by RF magnetron sputtering and the optimum deposition condition was 300℃ substrate temperature, 5mtorr working pressure, Ar ambient and 140watt RF power, respectively. And the device was annealed at 400℃, O_(2) ambient for 1 hour to obtain a better C-axis poling structure. The fabricated PSFET device showed piezoelectric voltage(40mV/kgf/cd) and sensitivity (21μA/kgf/cm^(2)) according to an applied pressure(1kgf/cm^(2)~4kgf/cm^(2)).
양한진(Han-Jin Yang),주영훈(Young-Hoon Joo),김규석(Kyu-Seok Kim),이규호(Kyu-Ho Lee),박병해(Byoung-Hae Park) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.7
본 논문에서는 비접촉식 미세 측정 광학기에 의해 측정된 광학 영상을 경계 추출 기법과 스티칭(Stitching)기법에 의하여 보다 강인한 정합 알고리즘을 제안한다. 이를 위해 먼저 각각의 영상들의 템플릿(Template)을 설정하고, 템플릿들의 상관도를 판별하여 두 기법으로 분류한다. 그런 다음 두 영상의 중첩(Overlap)되는 부분을 각각의 기법에 의하여 정합되는 위치를 찾아낸다. 제안된 방법은 실험을 통해 그 응용 가능성을 증명한다.
잔류응력이 강주의 내력에 미치는 영향에 관한 연구 ( A Study on Residual Stress Effects upon Strength of Steel Columns )
양영성,김규석 대한건축학회 1983 建築 Vol.27 No.6
본 논문에서는 압정강이나 용접판접합부의 잔류응력의 크기나 분포형태에 대한 실험결과를 토대로 중심압축하중을 받는 강주의 기본적인 잔류응력분포형태를 가정하고 근사적으로 모델화 하여 주강도곡선을 수치해석으로 구함으로써, 잔류응력의 분포형태나 크기가 강주의 내력에 미치는 영향을 연구하는데 목적이 있다.
김규석(Kyu Suk Kim),양영성(Young Sung Yang),최산호(San Ho Choi),김필중(Pil Jung Kim) 한국강구조학회 1993 韓國鋼構造學會誌 Vol.5 No.3
This paper is to study experimentally the ultimate strength of reinforced perforated composite beams. One perforated steel beam, one normal composite beam, two perforated composite beams and two composite beams with reinforced web openings according to the opening to the opening shape ratio. Moment-shear ratio was 330. Opening depth was 70% of steel beam depth. As the result, we could find out the following conclusions : 1. The concert slab in composite beam can increase up so much the strength of the beams. 2. By using reinforcement in the vicinity of openings, the ultimate strength of composite beams with web opening can increase up to that of composite beams without web openings. 3. The ultimate strength of perforated composite beams according to the moment-shear ratio was little concerned with opening length.