http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
엔테로바이러스 뇌수막염에 감염된 소아에서 뇌척수액의 백혈구 증가증 유무와 임상적 특징의 연관성
안희재,박민주,이정호,홍용희,서은숙 순천향대학교 순천향의학연구소 2015 Journal of Soonchunhyang Medical Science Vol.21 No.1
Objective: Enteroviruses are major causes of aseptic meningitis in children. This study aimed to describe the clinical manifestations of enteroviral meningitis according to the presence of cerebrospinal fluid (CSF) pleocytosis, and to investigate the factors influencing the CSF pleocytosis in children with this condition. Methods: Eighty children with enteroviral meningitis treated at Soonchunhyang University Hospitals in Seoul and Bucheon between July 2012 and August 2013 were enrolled. The patients were diagnosed by reverse transcription-polymerase chain reaction (RT-PCR), and the clinical variables were compared according to the presence of CSF pleocytosis. Results: Of the 80 patients, 54 (67.5%) and 26 (32.5%) patients had and did not have CSF pleocytosis, respectively. Forty-eight (60%) patients were male, and the median age was 63 months (range, 2 to 192 months). Seventy-six (95%), 67 (83.7%), 51 (63.7), and 2 (2.5%) patients presented with fever, headache, vomiting, and seizure, respectively. Increased CSF protein and pressure were associated with CSF pleocytosis. However, age, peripheral white blood cell count, C-reactive protein, CSF glucose, CSF/serum glucose ratio, and onset-puncture time interval were not associated with the presence of CSF pleocytosis. Conclusion: This study demonstrated a high proportion of non-pleocytic enteroviral meningitis in children, and identified several clinical manifestations that were associated with CSF pleocytosis. The findings of this study may help us better understand the characteristics of the disease and facilitate early diagnosis and treatment of enteroviral meningitis. During the outbreak seasons of enteroviral meningitis, the importance of continuous surveillance of enteroviruses and rapid RT-PCR testing should be emphasized.
Thermoelectric Performance of Sn and Bi Double-Doped Permingeatite
안희재,김일호 대한금속·재료학회 2022 대한금속·재료학회지 Vol.60 No.8
In this study, mechanical alloying was performed to synthesize permingeatite Cu3Sb1-x-ySnxBiySe4 (0.02 ≤ x ≤ 0.06 and 0.02 ≤ y ≤ 0.04) doped with Sn and Bi. Hot pressing was subsequently conducted to achieve dense sintered bodies. When the Bi content was constant, the carrier concentration increased with the Sn content, but the mobility decreased owing to the increased carrier concentration. In contrast, when the Sn content was constant, the carrier concentration and mobility were not significantly affected by the Bi content. Higher electrical conductivity was observed in specimens with a higher Sn content or lower Bi content; consequently, Cu3Sb0.92Sn0.06Bi0.02Se4 exhibited the highest electrical conductivity. The Seebeck coefficient increased with temperature, and it is inferred that the permingeatite doped with Sn/Bi does not undergo an intrinsic transition until 623 K. In contrast to the electrical conductivity, a higher Seebeck coefficient was obtained in the specimens with a lower Sn content or higher Bi content; consequently, Cu3Sb0.94Sn0.02Bi0.04Se4 exhibited the highest Seebeck coefficient. Cu3Sb0.92Sn0.06Bi0.02Se4 exhibited the maximum power factor, depending on the electrical conductivity and Seebeck coefficient. The electronic thermal conductivity was not significantly affected by temperature, but the lattice thermal conductivity decreased as the temperature increased. However, the thermal conductivity decreased with increasing temperature. Sn doping effectively reduced the lattice thermal conductivity, whereas Bi doping effectively reduced the electronic thermal conductivity; consequently, Cu3Sb0.94Sn0.02Bi0.04Se4 exhibited the lowest thermal conductivity. Finally, the highest dimensionless figure-of-merit of 0.75 was achieved at 623 K by Cu3Sb0.92Sn0.06Bi0.02Se4.
Sloped-LOM 방식 3D 프린터를 이용한 비정형 EPS 거푸집 제작 공법 개발
안희재,이동윤,지우종,이우재,조훈희,Ahn, Heejae,Lee, Dongyoun,Ji, Woojong,Lee, Woojae,Cho, Hunhee 한국건축시공학회 2020 한국건축시공학회지 Vol.20 No.2
Recently, free-formed construction technology is becoming a new measure of representing technological superiority and sociocultural ingenuity. However, the CNC processing technology utilizing the existing wood and iron form has limitations in terms of the manufacturing time and material cost. Therefore, in this study, the method and process of manufacturing free-formed EPS form using S-LOM-based 3D printing technology were suggested. Furthermore, through the mock-up test, a comparative analysis of the manufacturing time and precision with CNC milling technology was conducted. The results show that S-LOM-based 3D printing technology has reduced manufacturing time about 57.4% compared to CNC milling technology during the free-formed EPS form manufacturing process. In addition, compared to the design drawings, the maximum error value was 20.5mm, proving the applicability of S-LOM-based 3D printing technology. The results of this study are expected to contribute to the improvement of S-LOM method and the activation of S-LOM method by verifying the applicability of S-LOM-based 3D printing technology. 최근 비정형 건축물이 한 나라의 기술적 우월성을 나타내는 새로운 척도로 부상하기 시작하면서 비정형 건축물을 효율적으로 제작하는 기술이 중요해지고 있다. 하지만 기존의 목재, 철재 거푸집 등을 CNC 기술로 가공하여 비정형 거푸집을 제작하는 방식은 제작시간과 재료 비용 측면에서 한계점이 존재한다. 따라서 본 연구에서는 S-LOM 방식의 3D 프린팅 기술을 통한 비정형 EPS 거푸집 제작 공법을 개발하고 제작 프로세스를 제시하였다. 또한 실물 모형 시험을 통해 기존 CNC 밀링 기술과의 제작시간 및 정밀도에 대한 비교 분석을 실시하였다. 연구결과, S-LOM 방식의 3D 프린팅 기술을 활용할 경우 CNC 밀링 기술 대비 약 57.4%의 제작시간 단축 효과가 있었다. 또한 S-LOM 방식의 3D 프린팅 기술의 경우 설계도면 대비 약 20.5mm의 오차의 최대 절댓값이 발생하였다. 본 연구의 결과는 거푸집 제작시간과 정밀도 측면에서 S-LOM 방식 기술의 현장 적용 가능성을 확인하여, S-LOM 방식 기술의 개선 및 공법 활성화에 기여할 수 있을 것으로 사료된다.
19세기 朝鮮 國王國葬에 관한 연구 - 純祖․憲宗․哲宗國葬을 중심으로 -
안희재 국민대학교 한국학연구소 2012 한국학논총 Vol.37 No.-
五禮 중 凶禮는 왕실을 직접 보살펴주는 선조의 귀신들이 産生되는 기제를 이루면서, 조선왕조 국왕승계의 이상적인 상태인 柩前承繼가 이루어지는 의례라는점에서 매우 중요하다. 조상신의 보우를 통해 국가의 안녕이 지켜지고, 이는 종묘․사직의 제사가 끊이지 않는 것으로서 증명된다. 또한 왕통의 승계, 세자책봉을 포함한 국가의 기간이 되는 결정들은 그것들이 朝廷에서 결정되었다 하더라도,宗廟에 계시는 혼령들에게 告由함으로써 비로소 법적 효력을 가지게 되는 것으로이해하고 있다. 19세기는 조선후기 국왕권이 최고조에 달한 正祖의 치세를 이으며, 대비를 연결고리로 하여 大妃戚族이 국권을 專斷하는 시기다. 이 시기 조선에는 순조․헌종․철종 세 국왕의 국장이 있었고, 國王國葬의 특징은 다음의 네 가지로 정리된다. 첫째, 顧命과 傳位遺敎가 없거나 분명하지 않다는 점이다. 이것은 嗣王이 어리거나 세자가 없었기 때문에 생겨난 일로 우연적 요소가 크다. 하지만 이를 기화로大妃가 國璽를 장악함으로써 遺敎를 대표하게 되었다. 둘째, 大妃의 位相이 강화되면서 대비에 관한 의례들이 설행되고, 마침내 의궤의 儀註로 자리잡게 된다. 절대적이었던 왕권의 위상이 흉례 행례에서 상대적으로 규정되었다는 것을 보여주고 있다. 셋째, 尊尊義理가 약화되고 家統체계를 중시하는 경향이 뚜렷해졌다. 철종이 家統으로서 純祖를 중시한 것도 이와 같은 경향이다. 넷째, 그럼에도 불구하고 이 시기 왕실흉례 절차와 행례는 세도정치 주도층에 의해 오히려 중시되는 측면을 보이고 있다. 세도정치 주도세력의 권력획득·유지가 국왕국장 의례를 매개로하여 이루어지기 때문이었다. 이리하여 척족세도기의 흉례 의주에 變禮가 계속 추가되었지만, 凶禮 형식의 골간은 완강하게 지켜지는 경향을 보이는 것이다.