http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
형태안정성 PCM: n-Octadecane과 초고분자량 폴리에틸렌으로 구성된 고화 젤의 제조 및 특성
손태원,박재훈,이우승,박소현,문정언,권오경,Son, Tae-Won,Park, Jae-Hoon,Lee, Woo-Seung,Park, So-Hyun,Moon, Jung-Eon,Kwon, Oh-Kyeong 한국섬유공학회 2012 한국섬유공학회지 Vol.49 No.4
Phase change materials based on UHMWPE blended with n-octadecane were studied in this paper. In addition, this paper reviews recent studies on the preparation of shape stabilized phase change materials (SSPCM), such as SSPCM from UHMWPE and n-octadecane, their basic properties and possible applications to latent heat storage. The preparation methods used were the melting methods. Shape stabilized PCM (SSPCM) prepared for FT-IR spectroscopy, SEM, DSC, XRD, and ARES results of the analysis for shape stability to improve heat capacity were identified. The optimum compounding conditions included a content of 40% n-octadecane. The SSPCM 40% demonstrated less deterioration of physical property and effective thermal property compared with other conditions. As a result, these SSPCMs could be said to be acceptable heat storage & release materials for various products.
카본블랙 충전 스타이렌 부타디엔 고무의 제전성에 관한 연구(I)-카본블랙 충전 고무재료의 전기전도성-
박인동,손태원,장동호,Park, In-Dong,Son, Tae-Won,Jang, Dong-Ho 한국섬유공학회 1994 한국섬유공학회지 Vol.31 No.11
The SBR film including a carbon black(Ketjen black, Denka black or Vulcan XC-72) was made from the compounds of SBR latex and carbon blacks of several weight %. The carbon black incorporated SBR rubber(CB-SBR) film were investigated in terms of resultant morphology and electrical properties. Up to The loading level 10wt%. the specific resistivity of the CB-SBR nim was decreased as the content of carbon black was increased. Of the three carbon blacks Keljen black endowed the highest conductivity on the CB-SBR rubber nim at the same loading level. On the whole, the antistatic effect was observed from the loading level 2.5~5.0wt% by towering the specific resistivity below 108$\Omega$.cm, and loading the carbon black more than 10wt% gave rise to conductivity by lowering the specific resistivity below 104$\Omega$.cm. Among the carbon blacks Kctjen black gave the highest antistatic efficiency, followed by Denka black and Vulcan XC-72.
환원 백색소자인 텅스텐 산화물 적극 계면의 전기화학적 특성 연구
민병철,박인철,주재백,손태원 ( Byoung Chul Min,In Cheol Park,Jeh Beck Ju,Tae Won Sohn ) 한국공업화학회 1995 공업화학 Vol.6 No.5
텅스텐을 열 산화하여 제조한 산화전극과 전자빔 진공 증착기에 의하여 ITO표면에 텅스텐 산화물을 증착시킨 박막전극의 전기화학적 발색 현상을 연구하였다. 두 종류의 전극에 대한 전기화학적 특성 및 용액내 용존 산소와 수소 이온농도의 영향을 순환 전류-전압 측정법, Tafel 분극실험 측정을 통하여 고찰하였다. 산소농도 변화에 따른 cathodic Tafel 분극 특성으로부터 산소 농도의 증가는 발색 반응의 이온교환 전류밀도를 미약하게 증가시키는 반면 Tafel 기울기는 크게 감소시킴을 알 수 있었다. 진공증착 박막 전극에서 발색 반응에 대한 α_°n을 계산하였으며 매우 느린 발색반응속도를 감안하여 완전 비가역이라 가정할 경우 반응에 소모되는 전자수는 0.62로써 박막 텅스텐 산화물의 반응성이 우수한 것을 알 수 있었다. 수소이온농도의 감소시 Tafel 기울기는 일차적으로 감소하였으나 수소이온 농도가 매우 적은 경우에는 반응기구가 다르게 변함을 알 수 있었다. 또한, 주사전자 현미경에 의하여 각 전극의 표면 상태를 조사한 결과 발색-소색의 순환 실험 후의 열 산화 후막 전극에서 심한 균열이, 또한 진공증착 박막 전극의 경우에는 균열에 의한 산화 막의 박리현상이 관찰되었다. X선 회절 분석법에 의하여 열 산화 후막 전극은 결정성을, 진공증착 박막 전극은 비정질성을 지님을 알 수 있었다. The phenomenon of the electrochromism of tungsten oxide films, which were deposited by electron-beam vacuum evaporation on indium tin oxide(ITO) glass and by thermal oxidation of tungsten bulk, was studied in H₂SO₄ solution. The electrochemical characteristics of these two kinds of electrodes were examined by cyclic voltammetry and Tafel polarization method. Considering the effect of dissolved oxygen on the Tafel polarization, the ion exchange current densities were slightly increased, while the catholic Tafel slopes were decreased with an increase of oxygen content. If the coloring process is assumed completely irreversible, the number of electrons or protons consumed in the coloring reaction would be 0.62 as a maximum value. This indicates that the evaporated film used in this study provided the good reactivities for the electrochromic reaction. The Tafel slope was linearly decreased with the decrease of hydrogen ion concentration and the reaction mechanism seems to be changed in a solution with very low hydrogen ion concentration. From the results of SEM, severe and moderate cracks were observed on the surface of thermally oxidized films and evaporated films, respectively. By the analysis of XRD, the structure of thermally oxidized film was identified as polycrystalline, whereas that of evaporated film was amorphous.
파라핀과 초고분자량 폴리에틸렌으로 구성된 형태안정성 상 전이 물질의 제조 및 특성
이현석(Hyun-Seok Lee),박재훈(Jae-Hoon Park),임종하(Jong-Ha Yim),서혜진(Hye-Jin Seo),손태원(Tae-Won Son) 한국고분자학회 2015 폴리머 Vol.39 No.1
상 전이 물질인 파라핀 왁스를 초고분자량 폴리에틸렌(UHMWPE)과의 absorption method를 통해 파우더를 제조 후 hot press를 사용하여 형태안정성 상 전이 물질(SSPCM) composite를 제조하였다. SSPCM composite의 화학, 미세구조, 형태, 열적, 결정구조, 유변학적 특성을 조사하기 위하여 FTIR, SEM, DSC, XRD, ARES 측정을 하였다. FTIR 분석결과 파라핀 및 UHMWPE의 고유 피크들이 나타나고 있는 것을 확인하였고, SEM 분석결과 파라핀의 농도가 40 wt%까지는 표면이 상당히 팽윤되며 거친 특성을 나타냄을 확인할 수 있었고, DSC 분석결과 SSPCM에서 파라핀 및 UHMWPE의 고유 융점들이 나타났고, XRD 분석에서는 파라핀과 UHMWPE의 2θ 값들이 SSPCM에서도 나타남을 확인할 수 있었고, ARES 분석에서는 파라핀 농도에 따른 G", G"", tanδ 값의 변화를 확인할 수 있었다. 종합적인 분석 결과를 통해, 파라핀의 농도가 30 wt%일 때, 형태안정성 측면에서 최적의 농도임을 확인할 수 있었다. Phase change materials based on ultra high molecular weight of polyethylene (UHMWPE) blended with paraffin wax (mp 65 ℃) were studied in this paper. In addition, this paper reviews recent studies on the preparation of shape stabilized phase change materials (SSPCM), such as SSPCM from UHMWPE and paraffin wax (mp 65 ℃), their basic properties and possible applications to latent heat storage. The preparation method was an absorption method. Also, SSPCM composites were prepared by using a hot press at 200 ℃ for 10 min. The analysis for the shape ability of SSPCM to improve heat efficiency was measured by FTIR, SEM, DSC, XRD, and ARES. UHMWPE composites with 30 wt% paraffin wax (mp 65 ℃) demonstrated less deterioration of physical property and effective thermal property compared with other conditions. As a result, these SSPCMs could be used for the heat storage and release materials for various products.