http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
소준호,송우영,김성환,홍완희,So, Joon-Ho,Song, Woo-Young,Kim, Sung-Hwan,Hong, Woan-Hue 대한전자공학회 1989 전자공학회논문지 Vol. No.
본 논문은 반도체 레이저의 주파수변조 응답특성에 대한 새로운 회로모델링 방법을 제시하였다. 특히 본 등기회로 모델은 캐리어농도의 변조효과 뿐만 아니라 온도효과에 따른 변조특성을 고려하였다. 본 모델에서 예상된 이론치는 기존에 발표된 CSP형 레이저의 정형파변조 실험결과와 잘 일치하고 있음을 알 수 있었다. This paper describes a new circuit modeling technique for the directly frequency modulated semiconductor laser. Especially this model accounts for not only the accounts for not only the carrier density effect but also the temperature effect. The simulation results with this model are compared with published experimental results of sinusoidal frequency modulation in the range from DC to 3 GHz, and show good agreements.
정명득,소준호,우병일,임중수,이상원,박동철,Jeong, Myeong-Deuk,So, Jun-Ho,U, Byeong-Il,Im, Jung-Su,Lee, Sang-Won,Park, Dong-Cheol 대한전자공학회 2002 電子工學會論文誌-TC (Telecommunications) Vol.39 No.3
2-6 GHz 디지털 위상변위기 모듈을 설계, 제작하였다. 위상변위기 모듈에 사용된 MMIC 칩은 광대역을 구현하기 위해 Lange 커플러로 구성된 반사형 회로를 이용하여 설계 및 제작하였다. 위상변위기 모듈은 6.1°RMS 위상오차, 13.5 dB 최대 삽입손실과 각각, 8 dB와 10 dB의 입·출력 반사손실 특성을 갖는다. 32개의 위상 상태를 측정하기 위해서 컴퓨터를 사용하여 측정을 자동화 시켰다. 8×8 위상배열용 모듈들간의 RMS 삽입 위상오차는 최대 ±0.5°이내이고, 모듈들간의 평균 삽입손실 편차는 최대 ±0.5 dB를 넘지 않았다. 제작된 위상변위기 모듈의 크기는 45 × 22.5 × 60 ㎣. 이다. 2-6 GHz digital phase shifter module has been designed and fabricated. For the broadband operation and performance, MMIC phase shifter chip for phase shifter module was designed and fabricated by using the reflection-type circuits with Lange coupler. The fabricated phase shifter module shows 6.1$^{\circ}$RMS phase error, 13.5 dB maximum insertion loss, and 8 dB and 10 dB input and output return losses, respectively. Computer controlled measurement systems are realized in order to get the measured data of 32 phase states. The RMS insertion phase error and the average insertion loss deviation among 8${\times}$8 modules for the phased-array system are less than ${\pm}$0.5$^{\circ}$and ${\pm}$0.5 dB, respectively. The size of fabricated phase shifter module is 45 ${\times}$ 22.5 ${\times}$60㎣.
도파관 시뮬레이터를 이용한 광대역 E-평면 넛치 위상 배열 안테나 설계
김준연,소준호,임중수 한국전자파학회 2003 한국전자파학회논문지 Vol.14 No.2
넛치 안테나는 진행파형 안테나로서 공진형 안테나에 비해 광대역 특성과 넓은 빔 폭을 가지므로 광대역 위상 배열 안테나의 복사 소자로 사용되어진다. 본 논문에서는 단일 복사 소자의 해석으로 무한 배열 안테나를 모의할 수 있는 도파관 시뮬레이터를 이용하여 3 : 1 이상의 주파수 대역과 $\pm$45$^{\circ}$의 빔 조향 범위를 만족하는 광대역 E-평면 넛치 위상 배열 안테나를 설계하였다. 설계된 단일 소자의 등가회로 모델링을 통해 단일 소자와 무한 배열소자에서의 임피던스 특성을 비교하였으며, 설계된 결과를 이용하여 1$\times$9배열 E-평면 넛치 위상 배열 안테나 전체를 해석하였다. 이때 구해진 안테나간 상호 결합 계수를 이용하여 각 소자의 빔 조향 각도에 따른 능동 반사 계수를 구하였으며, 능동 소자 패턴을 통해 빔 조향에 따른 이득의 변화를 살펴보았다. Notch Antenna is a travelling wave type antenna and can provide multioctave operation in phased arrays that scan over wide angle. In this paper, we designed a wideband E-plane phased array antenna using E-plane waveguide simulator which has a bandwidth of 3 : 1 and a scan volume of $\pm$45$^{\circ}$ in E-plane. We compared impedance of single antenna and infinite array antenna using equivalent circuit modeling. We analyzed full structure of 1$\times$9 phased array antenna and we evaluated active reflection coefficient with variation of beam scan angle through mutual coupling coefficient acquired from simulation and investigated the variation of antenna gain with variation of active element pattern as beam scan angle is varied.