http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박동철의 사진 강좌: 눈에 띄는 사진 만들기 -마지막회
박동철,Park, Dong-Cheol 한국광학기기산업협회 2010 光學世界 Vol.130 No.-
눈에 띄는 인상적인 사진을 만들기 위해서는 명도와 색상 대비를 통해 주제를 강조하는 방법, 타이밍, 보조피사체 등을 이용한 다양한 방법들이 있다. 그 중 색상 대비란 조합된 색에 의해 주제가 시각적으로 두드러지게 나타나는 것을 말하면 명도 대비는 주변의 발기와 주제의 밝기가 대비를 이뤄 주제가 배경으로부터 돋보이도록 만드는 기법을 말한다. 특히 하나의 움직임 속에서 서로가 균형을 이루고 있는 단 하나의 순간을 찾아내는 타이밍 또한 인상적인 사진을 만드는 요건이다.
박동철의 사진강좌 - 다섯번째 - 초점 거리별 렌즈의 활용
박동철,Park, Dong-Cheol 한국광학기기산업협회 2010 光學世界 Vol.129 No.-
렌즈들의 고유한 초점거리는 모두 대각선 방향의 화각을 표시한 것으로 화각은 말 그대로 화면을 담을 수 있는 각도를 말한다. 화각이 제일 넓은 렌즈는 물고기가 바라보는 것과 같다고 해서 붙여진 어안렌즈를 비롯하여 광각렌즈, 망원렌즈 등이 있다. 이번호에서는 표준렌즈, 망원렌즈, 광각렌즈 등을 통해 초점 거리별 렌즈의 활용법을 알아보자.
박동철,Park, Dong-Cheol 한국광학기기산업협회 2010 光學世界 Vol.128 No.-
황금비율은 가장 조화롭고 균형 잡힌 아름다움을 만들어내는 비율로서 회화나 사진 같은 시각예술분야에서 사용되고 있다. 이번호에서는 가장 기본적인 황금분할 법칙과 이를 응용한 삼분할법, 여백과 공간 등을 활용한 안정적인 구도를 잡는 법에 대해 알아보자.
박동철의 사진 강좌 세 번째 - 화면 속 피사체의 배치
박동철,Park, Dong-Cheol 한국광학기기산업협회 2010 光學世界 Vol.127 No.-
인상적으로 느껴지는 사진의 공통점은 무엇일까? 사진을 자세히 분석해보면 이러한 사진들은 대게 공통점을 가지고 있는데, 바로 화면 속에 전경, 중경, 원경이 분리되어 있다는 것이다. 각각의 의미와 역할을 알아보자.
유사 비디오 데이터 집합에서 효율적인 특성정보 프로파일 생성 기법
박동철,장중혁,이원석,Park Dong Cheol,Chang Joong-Hyuk,Lee Won-Suk 한국정보처리학회 2005 정보처리학회논문지D Vol.12 No.2
With the rapid progress of computer technology in recent years, a digital video data has been used in many applications. As a result, various technologies have been introduced to discover knowledge embedded in a video database. However, few researches on data mining for a video database have been performed due to the unclear boundary of the information in a large amount of a video stream. This paper proposes an efficient generation method of a feature profile in a set of similar video data. To extract the information embedded in original video data efficiently, several refinement techniques are also presented. These methods include merging pixels, restricting preferred areas, removing noises under a minimum repeat factor, extracting important key frames, generating derived blocks and applying weights to dynamic and static areas differently. Finally, the performance of these methods is evaluated by comparing a result profile obtained by a data mining process with original video streams. 산업정보사회가 발달함에 따라 다양한 형태의 비디오 데이터들이 여러 분야에서 대량으로 생성되고 있다. 이에 따라 이들의 가공을 통해 비디오에 나타난 의미 정보를 추출하려는 다양한 접근들이 시도되고 있으며, 근래 들어 데이터 마이닝 기법을 응용한 특성정보 프로파일 생성 방법에 대한 관심이 증대되고 있다. 그러나 기존의 연구에서는 시공간적으로 방대한 비디오 데이터의 특징으로 인해 해당 분야에 대한 연구가 소극적으로 진행되어왔다. 본 논문에서는 유사한 의미를 나타내는 비디오 데이터 집합에서 의미있는 지식을 추출하는 특성정보 프로파일 생성 기법을 제안한다. 더불어, 특성정보 프로파일 생성과정의 효율적인 수행을 위해서 다양한 추가 고려 사항을 제시한다. 전체 특성 정보들 중에서 주요 정보에만 집중함으로써 데이터 양을 감소시키는 방법, 잡음 요소를 제거하고 관심영역을 설정하여 데이터 양을 감소시키는 방법 및 동적인 영역에 가중치를 부여하여 추출된 정보의 정확도를 향상시키는 방법 등이 포함된다. 끝으로, 실험용 비디오 데이터에 대하여 논문에서 제안된 다양한 압축 방법을 적용하여 클러스터링을 수행하고 이를 통해 구해진 특성 정보 프로파일과 원본 비디오 데이터의 특성정보와 비교하여 본 논문에서 제시한 다양한 압축 알고리즘을 검증한다.
完全豫測 一般均衡模型에서 均衡點의 受斂速度에 관한 分析
박동철 진주산업대학교 1997 산업과학기술연구소보 Vol.- No.4
This study focuses on Speed of Convergency in a Sample Perfact Foresight Model that is one of the very important issues in dynamic analysisto analysis these issues,we calibrate the Model using appropriate variables,driving the intertemporal conditions that are satisfied on the optimal path chosen by a central planner.next, we find how much fast the consumption and the capital converge to the steady state The results of the study are as follows the speed of convergence at the stead state depends on the paramaters. it is thus given by f" (K), f (K), δ,σ,θ,ικ,α, an increasing function of f" (K), f' (K),and of σ,and a decresing function of θ , δ. the higher the elasticity of substitution,the more willing people are to accept low consumption early on in exchange for higher consumption later and the faster capital accumulates and the economy converges to the stead state.
박동철,김태곤,김승혁,신도훈,김현우,한중원 한국복합재료학회 2018 Composites research Vol.31 No.6
오토클레이브 (Autoclave) 성형 공정은 항공산업분야의 복합재 부품 제작에 있어서 매우 안정적이고 중요한 제조방법으로서 자리매김 해왔었지만 오토클레이브가 가진 많은 장점과 함께 단점 또는 제약 사항들을 보여주고 있다. 최근에는 이러한 한계를 극복하기 위하여 다양한 탈 오토클레이브 (OoA, Out-of-Autoclave) 공정들이연구 개발되고 있는데, 본 연구에서는 탈 오토클레이브 공정 중 하나로서 많은 관심을 받고 있는 액상성형공정 (Liquid Composite Molding)을 사용하여 시편들을 제작하고 이를 오토클레이브 공정으로 제작된 시편과 실험적으로 비교평가하였다. 액상성형공정 중 DB (Double Bagging), CAPRI (Controlled Atmospheric Pressure Resin Infusion) 및 VAP (Vacuum Assisted Process) 공정을 사용하여 시편 제작을 수행하고 내부 기공 함유량, 두께, 유리전이온도, 층간전단강도 및 굽힘강도 시험 평가를 통하여 각 제작 공정에 따른 차이를 확인할 수 있었다. 전체적으로 오토클레이브 성형 시편이 우수한 두께 균일도, 낮은 기공 함유량 및 양호한 기계적 강도 특성을 보였으며, 액상성형공정 중에서는 CAPRI 성형 시편이 DB 및 VAP 성형 시편에 비하여 상대적으로 우수한 특성을 가짐을 확인하였다. Autoclave process has been remaining as one of the most robust and stable process in fabricating structural composite part of aerospace industry. It has lots of advantages, however exhibits some disadvantages or limitations in capital investment and operation. Recently, there have been various Out-of-Autoclave process being researched and developed to overcome those limitations. In this study, laminate specimens were fabricated using LCM (Liquid Composite Molding) process, regarded as one of potential OoA process. DB (Double bagging), CAPRI (Controlled Atmospheric Pressure Resin Infusion), VAP (Vacuum Assisted Process) and Autoclave process were used for laminate specimens. Void content, Thickness, Tg (Glass Transition Temperature), ILSS (Interlaminar Shear Strength) and Flexural strength properties were evaluated for comparison. It is verified that Autoclave based specimen has uniform thickness distribution, the lowest void content and outstanding mechanical properties. And, CAPRI based specimen exhibits relatively good physical and mechanical properties over DB and VAP based specimen and comparable mechanical properties with autoclave based specimen.