http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
자연습지 우포늪 퇴적물의 연도별 잔류성 유기오염물질 축적도
부민호,이찬원,이상천,김종국,전홍표,김기호,최경희,윤준헌,정미정 한국습지학회 2008 한국습지학회지 Vol.10 No.2
The vertical distribution of dioxins and hexachlorobenzene(HCB) in a sediment core was investigated to elucidate historical trends of dioxins and HCB deposited into Upo wetland. The total concentration of dioxin ranged from 8.7 to 66.27 pg/g-dw in Upo sediments deposited, and from 17.64 to 97.03 pg/g-dw in Mokpo. Dioxin fluxes increased from the first-1990s and then reached a maximum in the mid-1990s. The major source of dioxin by comparing the congeners pattern was pentachlorophenol(PCP) used of agrochemicals. The HCB concentration in most of samples was detected below the MDL(Method Detection Limit of 0.5ng/g), except a few samples.
도요타 생산방식에서의 JIT 적용현황 및 新 도요타 생산방식에 관한 연구
부민호,박윤선 明知大學校 産業技術硏究所 1997 産業技術硏究所論文集 Vol.16 No.-
Just-In-Time is a new way of thinking about manufacturing. the challenge of Just-In-Time is that it constitutes a complete departure from the old operational systems that have been used for many years in our factories. Just-In-Time is not a narrow discipline applied to specific areas n manufacturing. Instead, Just-In-Time is not a narrow discipline applied to specific areas in manufacturing. Instead, Just-In-Time is a collection of disciplines that reaches a wide range of departments that normally are not considered operational in nature. Most of the Just-In-Time concepts have been developed in Japan through many years of hard work and attention to detail. These concepts evolved, in many cases within different companies, toward the basic principle that manufacturing products should be done in the most efficient way and in the minimum amount of time, result in the highest possible quality, and use the minimum quantity of raw materials at hand.
Simulation을 이용한 FMS 환경하에서의 Tool Sharing에 대한 연구
부민호,박윤선 明知大學校 産業技術硏究所 1999 産業技術硏究所論文集 Vol.18 No.-
In the past FMS (Flexible Manufacturing system), for the job type with many operations, after the operation of a part on one machine is done, the part moves to another machine for the appropriate operation. However, the modern FMS can reduce the setup time remarkably by developing a system in which one machine performs various operations without moving to other machines. But, this system still has the tooling problem. This paper discusses how to increase the tool utility as well as reduce the number of tools through tool sharing.
글로우 방전을 이용한 고효율 공기 정화용 화학 반응기의 특성관찰에 관한 연구
김기호,부민호,이상천,Kim, Gi-Ho,Bu, Min-Ho,Lee, Sang-Cheon 대한화학회 2006 대한화학회지 Vol.50 No.1
방전을 이용한 화학반응기의 기본 모델은 관통형 속 빈 음극 방전셀을 응용하였다. 최근 글로우 방전은 원자분광학에 있어서 방출원으로서의 역할과 더불어 원자화 장치로서 점차적으로 그 연구의 범위를 넓혀가고 있으며, 미량분석, 철강분석, 표면 분석 등에 널리 사용되고 있으며 타 분석 기기와의 접목 등을 통하여 상당한 기술적 성과가 이루어지고 있다.1 또한 본 연구 이전에 기초적인 글로우방전의 성질과 방출 특성에 대해서도 여러 차례 재검토된 바 있어 본 실험에 활용할 수 있었다.2-3 지난 1993년에는 저온의 플라즈마를 이용하여 대기중의 유독가스의 처리에 대한 연구가 발표되었으며, 이 논문에 의하면 연속적인 공기의 흐름 하에서 직류 글로우 방전을 이용하면 유해성 가스인 SO2와 NO의 제거가 가능하다고 보고되었다.4 이를 바탕으로 본 연구에서는 안정적인 공기 플라즈마의 형성과 관통형 양, 음극관 안으로 모든 흐름공기가 음 글로우(Negative glow)영역을 통과하도록 고효율 반응기를 설계하였다. 현재 본 연구에서 디자인한 속 빈 음극관 형 글로우 방전은 경제성이 우수하며 사용하기 쉽다는 것 외에도 방출원 으로서의 장점도 제공함을 관찰하였다. the basic model of chemical reactor using glow discharge, we used cathode discharge cell with vacant cavity in the middle. Currently glow discharge is widely studied as a radiation source or atomization device in atomic spectroscopy and remarkable technological achievements are made through the graft with other analysis devices such as microanalysis and steel analysis.1 Additionally, as the characteristics of basic glow discharge and radiation have been reviewed many times, those results could be used in this experiment.2-3 In 1993, an article regarding the treatment of poisonous gas in the air using low temperature plasma was published. According to this article, if DC Glow Discharge is used under continuous atmospheric flow, poisonous gases such as SO2 and NO can be removed.4 Based on those findings, we designed highly efficient reactor where stable air plasma is composed and all air flow pass the negative glow area passing through the tube. It was observed that the cathode tube type glow discharge developed in this study would be economical, easy to use and could be used as radiation source as well.
이찬원,부민호,전홍표,임경원,김기호 한국습지학회 2008 한국습지학회지 Vol.10 No.3
우포늪은 창녕군 유어면, 이방면 및 대합면에 걸쳐 원시생태계를 유지하고 있는 국내 최대의 내륙습지이다. 낙동강 본류의 물이 소하천인 토평 천의 골짜기를 따라 거슬러 올라가면서 퇴적물이 쌓여 자연제방이 생기고 그 안쪽에 물의 일부가 남아서 우포, 목포, 사지포의 배후습지가 되었다. 우포도 홍수 때 낙동강물이 역류하면서 수심이 깊어지고 평소에는 낙동강으로 자연 배수되어 수 심이 낮아졌다 (박수영 등 2000). 우포늪은 1997 년 7월 26일 생태계보전지역 중 생태계특별보호 구역 (환경부고시 1997-66호)으로 지정되었으며 국제적으로도 1998년 3월 2일 람사르협약 보존 습지로 지정되었다. 그리고 1999년 8월 9일 습 지보호지역으로 지정하여 관리하고 있다.