LTCC 내장 캐패시터용 BaTiO₃계 세라믹스의 저온소결 및 유전특성

박정현,최영진,고원준,박재환,남산,박재관,Park, Jeong-Hyun,Choi, Young-Jin,Ko, Won-Jun,Park, Jae-Hwan,Nahm, Sahn,Park, Jae-Gwan 한국세라믹학회 2005 한국세라믹학회지 Vol.42 No.2

[ $BaTiO_3$ ]계 유전체 모재료에 대하여 $Al_{2}O_{3}$와 CaO 조성이 소량 포함된 lithium-borosilicate계 유리 프릿을 $5\~15wt\%$ 적용함으로써 LTCC용 내장 캐패시터로 적용 가능한 조성을 개발하였다. 이를 위하여 먼저, 화학적으로 안정하고 저온소성효과가 탁월한 유리 프릿 조성물을 설계하고 이를 유전체 모재료에 적용하여 저온소성특성 및 유전특성을 평가하였다. $BaTiO_3$ 세라믹스를 모재료로 하는 경우 유리 프릿을 5wt$\%$ 첨가하였을 때 $925^{\circ}C$에서 $95\%$ 정도의 상대밀도 값을 나타내었으며, 이 경우 유전율 990, 유전손실 $3.1\%$의 유전특성을 나타내었다. $(Ba,Ca)(Ti,Zr)O_3$ 세라믹스를 모재료로 하여 유리프릿을 10 wt$\%$ 첨가한 경우는 $875^{\circ}C$의 소결온도에서 상대밀도가 $95\%$ 이상이며 기공율 $0.5\%$ 이하인 소결특성을 나타내었고, 700 이상의 유전율 및 $2\%$ 내외의 유전손실 값을 가지는 것으로 측정되었다. The compositions for LTCC embedded capacitors based on $BaTiO_3$ ceramics with $5\~15\;wt\%$ of lithium-borosilicate glass frits were studied. After the glass frits, which is chemically stable and has acceptable ability of low-temperature sintering, were added to the host dielectric materials, the sintering behavior and dielectric properties were evaluated. As for $BaTiO_3$, relative density of >$95\%$, permittivity 990, and dielectric loss $3.1\%$ were obtained when sintered at $925^{\circ}C$ with 5 wt$\%$ of glass frits. As for $(Ba,Ca)(Ti,Zr)O_3$ ceramics, relative density of >$95\%$, open porosity <$0.5\%$, permittivity 700, and dielectric loss $2\%$ were obtained when sintered at $875^{\circ}C$ with 10 wt$\%$ of glass frits.

중유전율 LTCC 기판용 $CaZrO_3-CaTiO_3$계 세라믹스의 저온소결 및 유전특성

박정현,최영진,고원준,박재환,박재관,Park Jeong-Hyun,Choi Young-Jin,Ko Won-Jun,Park Jae-Hwan,Park Jae-Gwan 한국마이크로전자및패키징학회 2004 마이크로전자 및 패키징학회지 Vol.11 No.3

[ $CaZrO_3$ ]세라믹스에 대하여 $CaTiO_3$세라믹스의 첨가량 변동에 따른 마이크로파 유전특성을 조사하였다. 또한 중유전율 LTCC 기능성 기판으로 활용하기 위하여 저융점의 유리 프리트를 첨가하여 $CaZrO_3-CaTiO_3$ 세라믹스의 저온 소결 거동과 마이크로파 유전특성을 평가하였다. 저온 소결 조제로 사용된 저응점의 유리 프리트를 $10-20 wt\%$ 범위로 첨가함으로서 $CaZrO_3-CaTiO_3$ 세라믹스의 소결온도를 $1450^{\circ}C$에서 $900^{\circ}C$이하로 낮출 수 있었다. 음의 온도계수를 갖는 $CaZrO_3$ 및 유리프리트에 대하여 양의 온도계수를 갖는 $CaTiO_3$ 세라믹스의 분율을 적정히 제어함으로서 제로의 온도계수를 구현할 수 있었다. $CaZrO_3-CaTiO_3$ 세라믹스에 저온 소결용 유리 프리트를 $15 wt\%$ 첨가하여 $875^{\circ}C$에서 소결한 경우. 유전율(k) 23, 품질계수(Q${\times}$f) 2500, 공진 주파수 온도계수$(T_f) -3 ppm/^{\circ}C$의 매우 양호한 마이크로파 유전특성을 나타내었다. The microwave dielectric properties of $CaZrO_3$ ceramics with addition of $CaTiO_3$ were studied. The effect of glass addition on the low-temperature sintering and microwave dielectric properties of $CaZrO_3-CaTiO_3$ ceramics were also evaluated to develop the materials for functional substrates of low-temperature co-fired ceramics. When $10-20 wt\%$ of lithium borosilicate glass was added, the sintering temperature of the $CaZrO_3-CaTiO_3$ ceramics decreased from $1450^{\circ}C$ to below $900^{\circ}C$. As the $T_f$ of glass frits and $CaZrO_3$ are slightly negative and that of $CaTiO_3$ is significantly positive, zero $T_f$ could be realized by mixing an appropriate amount of $CaTiO_3$ with $CaZrO_3$. The $CaZrO_3-CaTiO_3$ ceramics sintered at $875^{\circ}C$ with $15wt\%$ glass frits showed the relative density of $98\%$, permittivity of 23, quality factor of 2500 GHz, and temperature coefficient of resonant frequency of $ -3 ppm/^{\circ}C$.

프로세스 이행 수준과 개발 기술 품질 관리 모델

박정현,박영식,정효택,김상훈,Park, J.H.,Park, Y.S.,Jung, H.T.,Kim, S.H. 한국전자통신연구원 2017 전자통신동향분석 Vol.32 No.6

This paper describes a project - based quality management model that identifies development technologies and codes while at the same time verifying the ability to implement processes that are essential in R & D projects. In order to verify the process implemented in the R & D project implementation, there are review, checking points, and evaluating methods the process performance levels for five processes such as defining requirements which is the beginning stage of system development, testing process which is the completion stage of system development, and project management and peer review process for project management and support in the proposed project-based quality management model. For development technology and code validation, the model included the documented test cases for each requirement by the developer in the requirements definition stage, debugging and testing in the design and implementation stages, static analysis and open source licence verification procedure, and system environment. After applying the model in SW development R&D project for evaluating the process performance, and verifying the development technology and the code, the developers responded that the improvement in the development technique and the code, and upgrade of process performance level for project are more than 10%.

GPRS망을 방문한 이동 ISP 가입자의 무선 인터넷 서비스를 위한 동적 IP 할당 방법

박정현,Park, Jeong-Hyun 한국정보처리학회 2004 정보처리학회논문지D Vol.11 No.4

본 논문에서는 GPRS망으로 이동한 이동 ISP 가입자가 GPRS망을 접속하여 무선 인터넷 서비스를 받을 때 필요한 홈 ISP망의 동적 내 주소할당에 대한 문제점을 살펴보고 그 해결 방안으로 홈 ISP망 내 특수(specific) DHCP Relay를 개발하여 운영하는 방법을 제시했다. 실제 GPRS core network testbed와 ISP망을 구축하고 특수 DHCP Relay를 개발해서 GPRS망으로 이동한 이동 ISP 가입자에게 홈 ISP망의 동적 IP 주소 할당을 과정과 결과를 시뮬레이션을 통해 확인하였다. This paper describes problems when visited ISP subscriber gets dynamic IP address in home ISP for wireless internet service on GPRS network. We propose a specific DHCP relay for wireless internet service of visited ISP subscriber on GPRS network. We designed and implemented the specific DHCP relay and installed it in ISP testbed. We show the allocated dynamic IP address using specific DHCP relay for visited ISP subscriber on GPRS network. Now we think it is possible the visited ISP subscriber can access wireless internet service on GPRS network using specific DHCP relay, and UMTS system can be managed IP address for subscriber roaming.

독립기념관의 건립과정과 담론 변화에 관한 연구

박정현,Park, Junghyun 한국건축역사학회 2016 건축역사연구 Vol.25 No.6

A discourse on the Independence Hall of Korea, a representative cultural project of the 1980s, has been understood as a repetition of the traditional debate of the 1960s. It was considered as a petrified propaganda aimed at ensuring the fragile legitimacy of the military regime, and the architect as a sympathizer. Even if all these facts are true, it does not give any explanation for the architecture. Scrutinizing the building process and the change of discourse in the Independence Hall of Korea, this paper tries to explore a section of contemporary Korean architecture in the 1980s. The architect who designed the Independence Hall of Korea is Kim Kiwoong, however, it was Kim Won who took charge of overall scheme for it. Kim Won replaced the role of a technocrat in the 1960s, who deprived architects of his autonomy. Against this backdrop, Kim Kiwoong attempted to explain his own building via various concept like postmodernism, which gave him very proper context. But, later, he appropriated words like void and madang. These derived from some architectural historian's researches in 1970s, and were to predict the architecture of the 1990s.

케미컬 라이트에 의한 각결막 화상 1예

박정현,송낭희,지남철,고재웅,Jung Hyun Park,MD,Nang Hee Song,MD,Nam Chul Chi,MD,PhD,Jae Woong Koh,MD,PhD 대한안과학회 2010 대한안과학회지 Vol.51 No.9

Purpose: Chemical lights, also called Luminous Sticks, consist of a solution of diphenyl oxalate (C14H10O4) and hydrogen peroxide (H2O2). Human tissue can be damaged when the mixed solution contacts the human body. The authors report a single case of chemical injury of keratoconjunctiva by exposure to chemical lights. Case summary: A 47-year-old man’s right eye accidentally contacted the fluorescent material when breaking a Luminous Stick 7 days before being referred to our clinic. He had pain in the right eye and experienced visual loss. The patient’s best corrected visual acuity in the right eye was 20/50. An ulcerative lesion with edema at the inferior bulbar and palpebral conjunctiva and coneal epithelial defect was observed upon biomicroscopic examination. The patient was hospitalized and antibiotics, steroids, mydriatic and artificial tear eye drops were applied for treatment. After 9 days of treatment, the best corrected visual acuity of the patient recovered to 20/20, and the conjunctiva and cornea were mostly healed. No complication was observed. Conclusions: Chemical lights are commonly used in concerts and festivals. If the contents contact the eyes when breaking the chemical lights, various chemical burns can occur and cause ophthalmologic complications. Since no regulations have been passed regarding chemical lights, safety education and supervision are considered to be necessary for children. J Korean Ophthalmol Soc 2010;51(9):1282-1286

RADIUS 인증 및 과금 서버를 이용한 IP 관리 방법

박정현,Park Jeong-Hyun 한국정보처리학회 2005 정보처리학회논문지D Vol.12 No.1

GPRS 망으로 이동한 이동 ISP 가입자가 무선 인터넷 서비스를 제공 받기 위해 필요한 IP 할당과 인증 문제점을 알아보고 그 해결 방법으로 인증 및 과금 기능을 가진 RADIUS 인증 및 과금 서버론 이용한 IP 관리 기법을 제안하였다. 제안된 RADIUS 인증 및 과금 서버를 이용한 IP 관리 기법을 통해 GGSN은 할당된 IP의 갱신(할당시간 연장) 및 해제의 과정을 수행할 수 있도록 하고 지속적인 무선 인터넷 서비스 지원 및 IP 자원 관리를 가능하게 하며 이를 위해 ISP 내 RADIUS 서버와의 연동 신호를 정의하였다. This paper describes the requested IP assignment and authentication problem for wireless internet service of visited ISP subscriber on GPRS network, and proposes to use RADIUS authentication and accounting server for these problems. In this paper, we also define signals between GGSN and RADIUS, and between RADIUS authentication server and accounting sever for IP management and wireless internet service.

GPRS 망에서 원격 이동 가입자의 무선 인터넷 접속을 위한 PPP CHAP 개선

박정현,김영진,이윤주,양정모,Park, Jeong-Hyeon,Kim, Yeong-Jin,Lee, Yun-Ju,Yang, Jeong-Mo 한국정보처리학회 2002 정보처리학회논문지 C : 정보통신,정보보안 Vol.9 No.4

We usually applied PPP CHAP when the visited ISP subscriber accesses to authentication server in own home ISP network and IP Assignment for remote Internet service. But PPP CHAP doesn't support in case of visited ISP subscriber in GPRS network accesses to authentication sorrel in own home ISP network for wireless Internet service. We suggest solution for this problem with PPP CHAP improvement. For this we propose the modified PPP CHAP message format, PCO Message format at MT, and interworking message and format between GGSN and RADIUS in home ISP network for wireless internet service of mobile ISP subscriber at GPRS network in this paper. We also show authentication results when visited mobile ISP subscriber via PPP CHAP at GPRS network accesses the RADIUS server in home ISP network. 원격 이동 가입자가 방문망에서 자신의 홈망 인증 서버를 접속하여 인증을 득하고 이를 통해 IP를 할당받아 무선 인터넷 서비스를 받게 되는데 이 경우 보편적으로 PPP CHAP 인증 기능을 적용한다. 그러나 기존의 PPP CHAP 인증 기능을 GPRS 망으로 이동한 원격 이동 ISP 가입자에게 직접 적용할 수는 없다. 이에 본 논문에서는 GPRS 망으로 이동한 원격 이동 ISP 가입자에게 PPP CHAP 인증 기능을 통해 홈망의 인증 서버를 접속하여 인증을 득하고 IP를 할당받아 이동 ISP 가입자가 GPRS 망에서 무선 인터넷 서비스를 받을 수 있는 방법을 제시한다. 이를 위해 본 논문에서는 GPRS 망으로 이동한 이동 ISP 가입자가 PPP CHAP 인증 기능을 통해 홈망의 인증서버로부터 인증을 득할 수 있도록 기존의 PPP CHAP 메시지 변경 구조와 MT에서의 PCO 메시지 구조, 그리고 GGSN과 ISP RADIUS 연동 메시지 구조 등을 제시한다. 또 제안된 PPP CHAP 방식을 통해 GPRS 망 GGSN에서 ISP망 내 RADIUS 서버 접속시 진행된 인증 시험 결과를 제시한다.

PSZ, Al₂O₃, TiO₂를 반응소결하여 제조한 쾌삭(快削) 세라믹스

박정현,정동식,이원재,김일수,Park, Jeong Hyun,Jung, Dong Sik,Lee, Won Jae,Kim, Il Soo 한국세라믹학회 2012 한국세라믹학회지 Vol.49 No.6

Machinability is important in engineering applications, especially in the current micro-electronics industry. Most ceramic components have complex shapes and hence require machining generally with diamond tools, which incurs a high production cost. Recently, h-BN-containing machinable ceramics have been developed, but these materials are very expensive due to the high raw materials and production costs. Therefore, the development of low-cost machinable ceramics is necessary. In this study, inexpensive $Al_2TiO_5$ was studied as a replacement for h-BN. $Al_2O_3$, $TiO_2$ and partially stabilized $ZrO_2$(PSZ) powders were mixed with various mole ratios and were sintered at $1500^{\circ}C$ for 1 h. The density, hardness and strength were then measured. The phase analysis and microstructures were observed by XRD and SEM, respectively. The machinability of each specimen was tested by micro-hole machining. The results of this research showed that the produced composites could be used as low-cost machinable ceramics.

SVM 커널함수의 파라미터 값에 따른 능동소나 표적신호의 식별 성능 분석

박정현,황찬식,배건성,Park, Jeonghyun,Hwang, Chansik,Bae, Keunsung 한국정보통신학회 2013 한국정보통신학회논문지 Vol.17 No.5

수중 천해 환경에서 능동소나의 반향 신호로 기뢰를 탐지 및 식별하는 일은 복잡한 해양 환경의 영향으로 어려운 문제이다. SVM은 패턴인식 문제에서 최적의 해를 제공하는 이진 분류기이다. 본 논문에서는 SVM을 이용하여 능동소나의 반향 데이터로 기뢰와 같은 금속 물체와 바위를 식별하는 실험을 수행하면서, SVM에 사용되는 커널함수의 파라미터 값의 변화에 따른 식별 성능을 분석하고 제시하였다. Detection and classification of undersea mines in shallow waters using active sonar returns is a difficult task due to complexity of underwater environment. Support vector machine(SVM) is a binary classifier that is well known to provide a global optimum solution. In this paper, classification experiments of sonar returns from mine-like objects and non-mine-like objects are carried out using the SVM, and classification performance is analyzed and presented with discussions depending on parameter values of SVM kernel functions.