http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Mixed-state Hall effect of $MgB_2$ thin films
김보연,정순길,문경희,강원남,최은미,김헌정,이성익,김형진,Kim, Bo-Yeon,Jung, Soon-Gil,Moon, Kyeong-Hee,Kang, W.N.,Choi, Eun-Mi,Kim, Heon-Jung,Lee, Sung-Ik,Kim, Hyeong-Jin The Korean Superconductivity Society 2006 Progress in superconductivity Vol.7 No.2
We have measured the Hall resistivity (${\rho}_{xy}$) and the longitudinal resistivity (${\rho}_{xy}$) on superconducting $MgB_2$ thin films in extended fields up to 18 T. We found a universal scaling behavior between the Hall resistivity and the longitudinal resistivity, which is independent of the temperature and the magnetic field. At a wide magnetic field region from 1 to 18T, a universal power law of ${\beta}=2.0{\pm}0.1$ in a scaling relation, ${\rho}_{xy}={A{\rho}_{xx}}^{\beta}$, was observed in c-axis-oriented $MgB_2$ thin films. These results can be well interpreted by using recent models.
Bombyx mori cathepsin D expression is induced by high temperature and H_2O_2 exposure
김보연,진병래,이광식,Mi Ri Sohn,Kee Young Kim,Kwang Ho Choi,Pil Don Kang 한국응용곤충학회 2011 Journal of Asia-Pacific Entomology Vol.14 No.3
Cathepsin D is involved in the metamorphosis of the silkworm, Bombyx mori. Here, we show the expression profile of B. mori cathepsin D (BmCatD) in the fat body during exposure to stressors, such as high temperature and H_2O_2. Exposure of larvae in the fifth instar stage to high temperature (28 °C) led to accelerated metamorphosis and shortened larval stage compared to control larvae grown at 23 °C. Concomitantly, the expression level of BmCatD mRNA was greatly increased during exposure to high temperature. We also detected significantly elevated H_2O_2 levels in the hemolymph of larvae treated with high temperature. To confirm that oxidative stress induces BmCatD expression, B. mori larvae were injected with H_2O_2. As predicted,we observed increased expression of BmCatD following H_2O_2 exposure. Based on these results, we conclude that BmCatD expression is induced by high temperature and H_2O_2 exposure and that this stress-induced BmCatD expression leads to early metamorphosis.
파노라마 동영상 스트리밍을 위한 적응적 스트립 압축 기법
김보연,장경호,구상옥,정순기,Kim Bo Youn,Jang Kyung Ho,Koo Sang Ok,Jung Soon Ki 한국정보과학회 2006 정보과학회논문지 : 시스템 및 이론 Vol.33 No.1
일반적인 동영상 스트리밍 시스템은 좁은 시각영역을 갖는 동영상을 원격의 사용자에게 제공한다. 서버 측에 팬/틸트(pan/tilt) 카메라를 부착한 시스템은 클라이언트가 카메라의 방향을 조작할 수 있도록 함으로써 보다 넓은 시각영역을 제공할 수 있다. 하지만, 하드웨어 팬/틸트 카메라를 이용한 스트리밍 시스템은 다수의 사용자가 동시에 접속할 경우, 모든 사용자에게 각자가 원하는 시점에서의 영상을 제공할 수 없으며, 카메라 이동에 의한 지연이 발생한다는 단점이 있다. 본 논문에서는 소프트웨어 팬/틸트 카메라를 구현하였으며, 이를 이용한 새로운 파노라마 동영상 스트리밍 시스템을 제안한다. 제안된 시스템은 넓은 시각영역을 가지는 파노라마 영상을 획득한 후, 각 사용자에게 원하는 부분영상을 제공함으로써 다수의 사용자에게 자유로운 시점 이동을 제공해 준다. 이때, 방대한 양의 파노라마 동영상을 원격의 사용자에게 전송하기 위해서는 효율적인 압축 방법이 요구된다. 본 논문에서는 전체 영상을 좁은 스트립 영상들로 분할하고, 클라이언트 측에서 원하는 시각영역에 해당하는 스트립 영상들만을 독립적으로 압축하는 적응성 스트립 압축 기법을 제안한다. 제안된 시스템은 적응성 스트립 압축 기법을 사용하여 파노라마 동영상을 압축, 전송함으로써 사용자의 시각영역 변화 및 새로운 사용자의 접속에 빠르게 대응할 수 있으며 클라이언트 전송 시 데이터 양을 효과적으로 감소시킬 수 있다. Traditional live video streaming systems support the limited field of view (FOV) of image to the remote users. A server system based on the pan/tilt camera provides a user with wide view by changing the view direction of the camera mechanically. But, when many clients try to access to the server, this system can not offer their own view to every user simultaneously, and moreover it has the delay by camera motion. In order to offer wide views to several users, we propose new streaming system using the panorama image that has wide view. Our system is a kind of implementation of software pan/tilt camera. The server acquires panorama video and sends a part of the video to clients. Then, each client can control their own view. We need the effective way to reduce the average transmission data size and server burden to the compression because generally the full size of panorama video is too big to be served by the real-time streaming. To solve this problem, we propose an strip-based video compression and adaptive transmission of the compressed multiple strip videos. Experimental results show that our system can be adapted quickly to the change of view and the number of clients. Furthermore, proposed method effectively reduce the transmission data.
과산화수소/케로신 점화용 분사기 설계 및 분무특성에 관한 연구
김보연(Boyeon Kim),황오식(Ohsik Hwang),이양석(Yangsuk Lee),고영성(Youngseong Ko),김유(Yoo Kim),김선진(Sunjin Kim) 한국추진공학회 2009 한국추진공학회 학술대회논문집 Vol.2009 No.5
본 연구에서는 케로신/과산화수소 점화용 분사기의 설계/제작하여 분무특성에 관한 연구를 수행하고자 하였으며, 이에 앞서 촉매점화방식으로 적용할 때 가장 적합한 분사기를 설계하고자 하였다. 설계/제작된 분사기를 수류시험을 통해 질량 유량 및 분산각을 측정하였다. 그 결과 케로신의 목표 질량유량(12.88g/s)은 설계 차압과 같은 차압인 3 bar에서 측정되었으며, 이 때 분산각은 40˚임을 확인하였다. 또한 과산화수소의 목표 질량 유량(94.39g/s)은 설계 차압(3 bar) 보다 작은 1 bar에서 측정됨을 확인하였다. This study was performed to design of H2O2/Kerosene catalyst ignition injector and cold flow test to measure the mass flow rate and spray angle. Mass flow rate and spray angle were measured by designed injector through cold flow test. Result of test kerosene mass flow rate was measured 12.88 g/s and 40 deg of spray angle at pressure drop 3 bar as same as design point. And hydrogen peroxide was measured 94.39 g/s at pressure drop 1 bar smaller than design point.
과산화수소/케로신 단일 인젝터 설계 및 혼합비에 따른 연소특성
김보연(Boyeon Kim),이양석(Yangsuk Lee),김근철(Geunchul Kim),고영성(Yungsung Ko),김유(Yoo Kim),김선진(Sunjin Kim) 한국추진공학회 2010 한국추진공학회 학술대회논문집 Vol.2010 No.5
본 연구에서는 과산화수소와 케로신을 추진제로 사용하는 로켓 엔진의 혼합비에 따른 연소특성을 파악하기 위해 동축 스월형의 단일 인젝터 로켓엔진을 설계 및 제작하여 연소실험을 수행하였다. 수류실험을 통해 설계/제작된 단일 인젝터의 분무 성능을 검증하였으며, 연소 시험은 혼합비에 따른 연소성능을 특성배기속도로 평가하였다. 연소 시험은 다양한 혼합비에서 성공적으로 수행되었으며, 설계점에서의 연소 효율이 약 95% 이상이었으며 연소실 압력 섭동도 매우 작은 것으로 확인되었다. In this study, a coaxial swirl injector using hydrogen peroxide and kerosene was designed and combustion performance tests were performed to evaluate combustion characteristic according to mixture ratio. Spray characteristic of the injector was verified by cold flow test and combustion performances according to mixture ratio were evaluated by the characteristic exhaust velocity. Test results showed that the combustion efficiency at the design condition was about 95% and the pressure fluctuation was very small.
가스메탄/액체산소를 추진제로 이용한 동축인젝터 설계 및 분무 특성
김보연(BoYeon Kim),이양석(YankSuk Lee),박진호(JinHo Park),고영성(YoungSung Ko),김선진(SunJin Kim),김유(Yoo Kim) 한국추진공학회 2010 한국추진공학회 학술대회논문집 Vol.2010 No.11
기체메탄/액체산소를 추진제로 이용한 동축인젝터를 설계하였으며, 전단(기체)/전단(액체)형 인젝터와 전단(기체)/스월(액체)형 인젝터 두 가지로 제작하였다. 수류시험을 통해 두 가지 인젝터의 미립화와 분무특성을 알아보았다. 전단/전단형 인젝터는 물줄기 형태로 분무되고, 전단/스월형 인젝터는 hollow cone형태로 분무되었다. 전단/전단형 인젝터보다 전단/스월형 인젝터의 미립화 성능이 우수하였다. Coaxial injectors using GCH4/LOx as propellants was designed with shear(gas)/shear(liquid) type and shear(gas)/swirl(liquid) type. Spray characteristics were investigated by cold flow test. Spray patterns of the shear/shear and the shear/swirl type injectors were like a spout of water and hollow cone, respectively. Atomization efficiency of the shear/swirl type injector was better than atomization efficiency of the shear/shear type injector.
가소화 전분필름의 강도 및 열적 성질에 미치는 나노셀룰로오스 및 아민화전분의 첨가영향
김보연 ( Bo Yeon Kim ),한송이 ( Song Yi Han ),이선영 ( Sung Yong Lee ),김영균 ( Young Kyoon Kim ),김남훈 ( Nam Hun Kim ),이승환 ( Seung Hwan Lee ) 한국목재공학회 2014 목재공학 Vol.42 No.4
본 연구는 가소화 전분필름의 열적 및 강도적 성질에 미치는 두 종류의 나노셀룰로오스, 즉 마이크로피브릴 셀룰로 오스(MFC)와 셀룰로오스 나노크리스탈(CNC) 및 아민화전분의 첨가영향을 조사하였다. 글리세롤(23 wt%)을 전분의 가소제로 사용하였으며, 나노셀룰로오스를 각각 1, 5, 10, 30 중량부(phr)를 첨가하여 나노필름을 제조하였다. 나노셀룰로오스의 첨가량이 증가함에 따라 인장강도 및 탄성율은 비례적으로 증가하였으나 신장율은 저하하였다. 또한, MFC 강화필름의 강도적 성질이 CNC 강화필름보다 큰 값을 나타냈다. 제지용 사이즈제로 사용하는 아민화전분의 소량 첨가는 강도적 성질의 향상에 양호한 영향을 미쳤다. MFC 강화 전분나노필름의 TGA에 의한 열적 안정성은 MFC (30phr)의 첨가에 의하여 향상되었으며, 아민화전분 첨가 나노필름의 경우에도 MFC를 첨가함으로써 향상되었다. This study investigated the effect of nanocellulose, such as microfibrillated cellulose (MFC) and cellulose nanocrystal(CNC), and aminated starch on tensile property and thermal stability of plasticized starch film. Glycerol (23 wt%) was used as a plasticizer and nanocelluloses of 1-30 parts per hundred parts of resin (phr) in the basis of plasticized starch were added. Tensile strength and elastic modulus increased with increasing nanocellulose addition amount, whereas elongation at break decreased. Tensile properties of MFC-reinforced starch film were higher than those of CNC-reinforced film. Optimum addition amount of aminated starch, which is commonly used for paper sizing, to improve tensile property of film, was found to be 5%. And 1% addition of aminated starch showed the best effect in the improvement of tensile property of the film. Thermal stability was improved with the addition of MFC to plasticized starch film with and without aminated starch.